How To Wire MK2 Golf 1.8t | Plug and Play Adapter Harness Install Pt.8

Подписаться 18 тыс.

Просмотров 22 тыс.

50% 1

In Part 8 Of the MK2 1.8t series we install all the wiring, talk about downpipes, and install the intercooler.
How to tell if your MK2 is CE1 or CE2 | What wires to Remove | Plug & Play harness Install Pt.2
• How to tell if your MK...
MK2 GTI VR6 SWAP **PLUG-AND-PLAY** HARNESS INSTALL Pt.6
• MK2 GTI VR6 SWAP ***PL...
For sale the same harness Jeremy and I use in all our swaps.
Plug & Play Harness
stancedubs.bigcartel.com/prod...
$400
Contents in Video
0:00 - Intro
4:00 - Mk4 wire install
7:08 - Plug and Play harness install
16:17 - Downpipes
18:21- Intercooler install
Intercooler I used. I feel like they change the price of this a lot. Right now it's $145
www.ebay.com/itm/Universal-12...
#mk2 #vw #mk4
MK1 Rabbit 1.8t Big Turbo First Drive \* IN 7 YEARS */
• MK1 Rabbit 1.8t Big Tu...
Party At The Peaks * My First Drift Event *
• Party At The Peaks * M...
MK2 Golf GTI * I found the original owner * VR6 24V
• MK2 Golf GTI * I foun...
MK2 Golf GTI * I found the original owner * VR6 24V
• MK2 Golf GTI * I foun...
MK2 VR6 Swap * Slim Fan Harness Install *
• MK2 VR6 SWAP ** Slim F...
Wagon's First Road Trip * 700 Miles on 1 tank *
• TDI Wagon First RoadTr...
How TO TDI SWAP * Start To Finish*
• Start To Finish *** TD...
VW Corrado Swap vr6 3.2 24v From a Toureg
• VW CORRADO SWAP VR6 3....
Want To Send Me Something ?
Jake Rawson
2720 70th Ave E
Fife, WA 98424

Авто/Мото

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@austinstephensparks 4 месяца назад

i use to work at a body shop we would put yellow masking tape on the connector ends and label them.. takes a couple seconds but can save hours at the end of a big project. especially if youre working multiple cars

@jakecvy7 4 года назад

This was so fun to follow. Patiently waiting for you to continue!

@anthonyalvarez6735 4 года назад

Thank you for all the time you took to make this video. I have watched hours and hours of your content. The quality and attention to detail have improved quite a bit. Good job Jake

@Ace-xm9iq 3 года назад

Awesome videos mate, well done 👏, brings back memories from 10 years ago.

@superrvolks Год назад

Superr thankful for all this knowledge on the Mk2 1.8T swap. Thank you very very much!

@PavolG7 4 года назад

Hello from Slovakia, i just want to say that i am impatient to next video. I am glad to waching your videos, also i am thinking about the project like this so that I am thankful.

@RickBruinsma 3 года назад

Jake, thank you so much for this video. It made it all clear for me today. Removed the wiring within 15 minutes I think, insane!

@JakeRawSon 3 года назад

Heck ya man. So glad the vids helped

@robertschlumpberger22 11 месяцев назад

I'm glad I found your channel. I hope it will help with fixing the wiring under the dash of my 87 GTI. It has/had the oil light at 2000 RPM (when the oil temp reaches operating temperature) issue that was really an electrical issue, not an oil issue. The wiring has gotten hot and probably needs to be replaced.

@izzyvw7510 4 года назад

I used the same engine mount brackets you are using back in 2012 and that $50 downpipes fit in my Corrado. The 1.8T does vibrate more that the VR6 so I used Black Forrest industries stage .5 yellow and G60 transmission mount which lower them. I guess there's just little things that might be different like the tunnel. I learned something new. Keep the videos coming. Great stuff my friend.

@JakeRawSon 4 года назад

Appreciate it Isai Ya the Corrado tunnel is a bit bigger. If you want to do a all wheel drive swap in a mk2. You usually cut the tunnel out of a Corrado and put it in a mk2 to fit the driveline.

@duranddurand9810 4 года назад

Good 👌😉

@judhillman3518 4 года назад

Hi Jake, great build! Wondering if you can help me please. I’m doing the same conversion. Do I just need the engine loom? There’s several looms in the bay that have big relays etc on them? Not sure if I need them all. Thanks

@ramirogonzalez2857 4 года назад

Hey man do you recommend a place to send my ECM to do the necessary delets? thanks

@jdportwerks6795 4 года назад

What motor did you use? Also what subframe & front k frame did you use? Was it all original mk2 gti!

@lukearcher9821 4 года назад

Hey man these videos are really helpful with my 1.8t swap when are you doing the rest? And Also what drive shafts did you use? Thank you

@JakeRawSon 4 года назад

Prob finish in the fall. Just used the stock mk2 axles

@geovannicarrillo4053 6 месяцев назад

Que buen trabajo haces. Ahora donde se puede comprar ese arnes adaptador ??? Gracias saludos desde mexico

@rahanibacarra5720 3 года назад

What about the black plug wire connector (mk4) what is it for?

@slickdick4 3 года назад

Awesome videos, just finished this series and the VR6, now I'm trying to figure out which to go with. VR6 sounds better but there seems to be more 1.8Ts available and they get better gas mileage. Can you point me in the right direction for keeping the AC, it gets pretty hot where I'm at. Thanks!

@JakeRawSon 3 года назад

Thanks man. Not sure I've seen to much info online about keeping the AC. I've seen it done but it's a struggle to make it all fit. Good luck

@hectordiaz6178 4 года назад

Been watching all your mk2 vr6 build for about a week. 👌🏼👌🏼 If I have any other questions when I go do the build. Where can I reach you? Lol

@JakeRawSon 4 года назад

You can dm my Instagram. Gti_jake or _jake_rawson_

@davidgomez35 Год назад

Are you put an audi Engine whit harness from mk4 or not in your mk2 sorry for the cuestión

@julianrusschen1336 4 года назад

got a link to the intercooler stuff that you bought off of ebay?

@dubCanuck1 4 года назад

Killing it Jake! Meant to ask you on your harness: how are you dealing with speedo and RPM? Just using the E&P convo parts?

@JakeRawSon 4 года назад

ya just using the corrado speedo cable for my mph. Then prob s&p digital to analog tach adapter for rpms

@nikkimukasa1301 3 года назад

@@JakeRawSon hello mate am so grateful for your videos about these cars. Really opened my eyes and so I do appreciate alot. Anyway where can I buy an adapter to bridge the harness and the fuse box?

@joshlismore 2 года назад

Does that harness work the tacho also or is that separate?

@alexdrula1843 Год назад

Hello mate if we don't have the adapter cables, how can we do it?

@iwanthomas4902 4 года назад

Good info, thanks for sharing maan! So the cd2 fuse/relay box is a mk3 unit? This wiring seems to comply with fitting a pd diesel 1.9td also to mk1 mk2 etc!

@iwanthomas4902 4 года назад

Also 3 views and 3 likes! Nice one man!

@Mawgai 4 года назад

CE2 boxes come in 89.5 Mk2's and up, and all mk3's.

@roby11087 2 года назад

Where did you get the p&p adapter loom?

@TophManChu 3 года назад

Currently watching your videos on this swap. I'm doing a 1.8T swap in my 81 caddy. Curious on what engine management you're using?

@JakeRawSon 3 года назад

my wiring is ce2 so just mk4 apr

@aurelie13160 2 года назад

Hello, where is possible to buy this adapter? because I don't find anything :(

@user-lj9vq7gn9u 6 месяцев назад

Helou, from portugal. I need welp. Ta have engineSwap audi a3 8l s3 Ref AMK motor 225cv. He have hornest, for my seat ibiza 6k gti2.0 16 abf? Same for golf mk3 gti.

@frankmaremani8359 4 года назад

Hey man. I've been watching all your videos I have a Polo player and I want to fit a 24v engine so I wanted to know which harness should I use?

@JakeRawSon 4 года назад

stancedubs.bigcartel.com/product/plug-play-mk4-engine-swap-harness

@Leifespen1997 3 года назад

Want to buy Harness for my mark 2 agu 1.8t swapped CAR engine is from 96-00

@olvanbarrera6118 2 года назад

Wer did yuo bay da adapter plog and play ?

@salvadorramirez8523 3 года назад

Friend that harness you use is for any 1.8t engine im making a swap but the engine is from a 2005 beetle witch 150 cv

@JakeRawSon 3 года назад

stancedubs.bigcartel.com/product/plug-play-mk4-engine-swap-harness

@kontrolkalemi7378 4 года назад

Hi Jake, can i use the 1.8T AEB or AGU engine for my mk2? What's the change thing? The another question is why not original passat use transverse engine mounting? They are front drive.

@JakeRawSon 4 года назад

Yes any 1.8t out of anything will work. Just have to get the right brackets to mount on the mk3 subframe.

@kontrolkalemi7378 4 года назад

@@JakeRawSon Thank you very much Jake. Thank you for all this. You encourage me.

@lxapproduction 4 года назад

When will you be putting out your next video? We need you :D My engine is now back together and waiting to get back into the car with freshly painted axles and mounts. Thank you

@JakeRawSon 4 года назад

Hope to get back on this project in the fall winter months

@lxapproduction 4 года назад

Jake RawSon Oh wow really :O Well I want to have my project finished by then ^^

@Ace-xm9iq 3 года назад

Hi, just a quick question did you completely remove the 3 plugs and old harness from the car?

@JakeRawSon 3 года назад

This show's the only wiring I took out. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R5tmUxOrolM.html

@davidgomez35 Год назад

sorry you sell the harness for the engine of audi tt 2002 for a vw cabriolet 90 the rear input of the fuse box is a connection not three

@allanmaidment4815 Год назад

Just wondering I’m putting this loom into a right hand drive car so am I going to need to extend the wiring to the o/s as the ce2 box is on the o/s

@JakeRawSon Год назад

Ya I think a couple of people have had to do the same thing

@allanmaidment4815 Год назад

Cool thank you 🙏

@pier-marcdenis4536 3 года назад

Hi from Québec Canada ! Doing a vr 12v mk4 swap in my mk2 jetta i realy need the plug and play harness but no news from pnwce2... do they still Make it?? Thank you for all your tip and videos very appreciate!

@JakeRawSon 3 года назад

Thanks for letting me know. I'll see if he's still making them. If he's not you can get one from stancedubs.bigcartel.com/product/plug-play-mk4-engine-swap-harness

@pier-marcdenis4536 3 года назад

@@JakeRawSon thanks jake he finally answer me ! Thank for all those info! Why don’t you do a alh mk2 swap next! It will probably be my next one ! Take care!

@nikkimukasa1301 3 года назад

Jake truth be told yo just awesome! Can you please guide me to where I can buy a harness adapter to work on a golf mk2 with a 1.8t 20v Engine? Best regards

@JakeRawSon 3 года назад

Thanks man. Here you go stancedubs.bigcartel.com/product/plug-play-mk4-engine-swap-harness