How To Use A Dual Action Polisher: Why You Are Not Getting Results!

Подписаться 279 тыс.

Просмотров 87 тыс.

50% 1

SUBSCRIBE right here for more awesome content!
/ @wilsonautodetailing
Griot's Garage DA Polisher: amzn.to/2TEgXRP
Beginner's Paint Correction Kit: amzn.to/2BvB51f
Wizard's Heavy Cut Compound: amzn.to/2PTvUBc
Stay Fresh Car Care Finishing Pad: amzn.to/2r4VVyA
*FOLLOW Wilson Auto Detailing on SOCIAL:
***Instagram: / wilson.auto.detailing
***Facebook: / wilsonautodetailing
If you have any questions/comments/concerns, or would like to know more about consulting details for your own auto detailing business, please Email me at WilsonAutoDetailing3@gmail.com
*If you are local to the Middle Tennessee area, and would like to contact me for detailing services, check out my website below:
www.wilsonauto...
About this video:
In this video I share the do's and don'ts of DA polishing, how to use a DA polisher, and the pit falls to avoid! These days, dual action polishers are so advanced that it is hard to screw things up, but nonetheless, there are still things that are necessary to understand in order to get the maximum results out of your DA polisher. From stalling the backing plate, to the pressure that you need to use, in this video I cover most every mistake that a beginner could make! Follow along, and learn how to get the best results with a DA polisher in the paint correction world!

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 200

@BansheeFifteen 4 года назад

Finally, I find an instructive video on how to use a Dual Action Polisher. This was really hard to find. Even the instructions with my polisher aren't very good. I think I got. Go slow, let the machine do the work, take the time, no reason to push hard, work a reasonably sized area. Thank You Wilson.

@gilbertrodriguez2595 3 года назад

How did it go? I know it was a year ago but have you improved?

@BansheeFifteen 3 года назад

@@gilbertrodriguez2595 It went well. I had to play around with different pads but eventually found I liked using the microfiber cap for my polisher. Also changing them out to a clean one seemed to make sense. I bought a bunch. I'm 68 and only polish once a year so I'm coming up to my next try. I'm thinking of buying a smaller one to get into smaller areas. At a certain point I have to remember that my car is a 2014 Mazda5, but its a good looking 2014 Mazda5. But thanks for your video, I learned a lot and got over my fear of using one.

@aminchaudhry8139 2 года назад

*I've owned the 849x going on 6 years **MyBest.Tools** and has never failed me.Smooth runningWell balancedNot too noisyDecent weightControlled RPM's that keeps it's speed no matter pressure*

@alexarana3689 5 лет назад

I like that you did not fast forward and showed us in real time😎😁

@wilsonautodetailing 5 лет назад

Thanks man! More to come!

@kenmcewan9069 3 месяца назад

Awesome for a beginner! Thank you. Not boring, too long and all the other things that makes you hit the 'stop' and move on!👌👌

@gambietti 5 лет назад

Useful video but would love to have seen an explanation of different pads for compounds and polishes.

@WolfieLovesDaddy 5 лет назад

Just by watching you I took a go at my hood on my jet black Jeep and it’s looking showroom quality...thanks Luke!!!

@-Gunnarsson- 4 года назад

I bought a rotary as beginner. Been hating it since day one and only got more problems from using it. Realised my bad choise gonna buy a DA polisher. Hopefully I will enjoy it more.

@JGV_IX 4 года назад

Brilliant!! I’ve been struggling with this and none of the other tutorials come close to this! Thanks a million!!

@robkelly2471 3 года назад

Really like your Chanel. Helps me a lot. I have such a passion for detailing. I do work full time. Actually two full time jobs but still manage to detail a few cars on the side. All I have done so far I heave gotten great feed back. All my detailing is done outside and really enjoy you including us guys who would kill for a garage but don’t have one. I’m 57 years old and still learning so much. Keep up the great work and keeping real. Rob K

@johnbrown3951 4 года назад

Thanks for that film. I tried my DA for the 1st time a couple of days ago have had it for about a year and never tried but now I have and had a good result and now having watched your film it gives me greater confidence to do more of my mini and move onto my Land Rover. Thanks.

@corinnelaking569 Год назад

Very solid, easy to understand, and follow tutorial. Thanks!

@TonyTheTechnician 4 года назад

Great video Luke. Been watching alot of your videos over the last couple of months and find you videos very helpful. Keep up the great work 👍

@adamroberts6448 5 лет назад

Great simple video outlining the basics. Keep it up! Side question... where do you get your business apparel?

@wilsonautodetailing 5 лет назад

Thanks Adam! I have a local guy who does everything for me!

@gunmetalgrey2019 5 лет назад

This guy is so clear at explaining, great video, I will be starting to machine polish soon, also got a few friends with swirls in their paint that needs attention.😁 plenty of opportunities for learning 😂 my brother has an old focus sitting outside the house that will be scrapped in the future, will definitely be experimenting on it before it goes 😎

@lotfi7567 Год назад

Poor focus 😢

@POP-ir5jx 4 года назад

Great audio and content. Thanks for aiming at the "weekend warrior" instead of the pro's.

@japs9132 5 лет назад

I kinda want to take my DA polisher back after selling it.......... Thank you for the correct tips!

@robertmassucci1 Год назад

Luke.....Am I your father, was your mom on the SS Galileo in the mid 80s thru 90s?

@janehanlon2802 Год назад

I have been using my da orbital to fast not stalling or pressure but just to fast , great video learnt a lot , still don’t understand how to shine the wax coat after polishing , not sure if to use a waffle pad or do by hand , also is the last step with wax coating a slow speed as in 3 or 4 or a faster speed , many thanks from Australia cheers

@andrewpeat8710 3 года назад

Clear, concise and really informative vid. Nice one!

@rockystrazzi2387 5 лет назад

New to your channel.great info..I have a old Corvette..I've used retail not professional polishers out of fear of damaging fiberglass..are there different procedures products and polishers when dealing with fiberglass..THANKS.

@MrLuigi-oi7gm 5 лет назад

Nice video. This "how-to" guide would also be helpful for woodworkers where random-orbit (dual-action) sanders have revolutionized their wood finishing process.

@wilsonautodetailing 5 лет назад

Definitely! Good thinking!

@FloridaSunMitochondria 3 года назад

Incredible video, so helpful. Super clear explanations!

@RealTalkInAmerica 2 года назад

You explained everything I needed to know, Thank You!

@joesalas6997 3 года назад

That was very informative, thanks. Do you have a video on how to use the DA polisher on the fenders or other parts of the car?

@colinwarby1597 4 года назад

Very well put. Was very easy to understand. Great video for a beginner like myself.

@codybaker6186 5 лет назад

So true !!! "Let the polisher do the work"

@juliovelasquez279 5 лет назад

Hey, Luke thanks for thanking ur time to do this videos, to be honest I'm a beginner on 5his field, I'm working on my family and friends cars.my goal is to specialize in interiors deep cleaning

@brysonsmothers5136 Год назад

Hope you’re still chasing this goal, man✌🏼💯 I’m just getting into the basics of exterior, currently.

@kylegallant3423 5 лет назад

Hey Luke.What procedure do you recommend to remove bug guts that have been left on black painted plastic mirrors. The bugs have etched the clear ? thanks and great channel BTW

@gsharks3333 3 года назад

Best polishing video on youtube!!

@johnp6987 Год назад

Great simple and well explained video 👍

@jayt8027 3 года назад

Hey man. Great videos. I'm new to detailing and was given a Simons rotary polisher. I can't seem to keep consistent contact with my pad to the panel. Any advice? Should I be starting out with a DA polisher? Cheers

@randomrangoon5476 3 года назад

Not gonna lie,when I heard those sirens I had to take my earbuds out and look out of the window 🤷‍♂️😂 Thanks for the video. Really helped

@gavincardwell2223 2 года назад

I use 3D speed with a medium cutting pad and I love it

@edilmendez1053 4 года назад

Thanks for the advice I was doing pressure mostly the time for polish and cutting what is the speed in orbital griots?

@spencerc4338 5 лет назад

What speed do you recommend for heavy duty compounding/swirl mark removal and what speed do you recommend for polishing/depth enhancement? Thanks Luke!

@wilsonautodetailing 5 лет назад

Hey man! For more heavy correction, I would sit somewhere around 3, the idea is to keep the polish from heating up too much because after it hits a certain temp. it doesnt work to its max ability. With finishing and gloss enhancement I might kick it up a notch to 4.5

@spencerc4338 5 лет назад

@@wilsonautodetailing Okay, thanks bro!

@donaldcook4308 5 лет назад

When you move to the next area, do you reload the pad with the same amount of polish?

@pandassudsnshine4125 4 года назад

There’s a tool like a brush that you use between area. That way your not working with excess build up from products or what’s coming off the area you work on. I do this every panel.

@kennethisaac3799 5 лет назад

I tend to move the polisher too fast but it drives me nuts to go so slow! I try to make up for it by making more passes and it seems to work well for me.

@wilsonautodetailing 5 лет назад

Good! That may work hahaha

@sAmiZZle82 4 года назад

Only difference I can think of, as an amateur myself, is that moving fast and doing more passes would create less heat. I think sometimes for hard euro paints, a little bit of heat can help. Alternatively, I've seen Dallas say that you can use less polish, like 2 dots instead of 3 to achieve more heat.

@thomas181212 5 лет назад

Hey luke, awsome video ! I’m a beginner and i noticed from your video that im probably going a much faster then you.. i also notice on the sides of the car that my polisher stalls more. I use speed 5 on my krauss s15 polisher. What do u recommend for stalling less? Btw love your videos Greetings from Belgium !

@wilsonautodetailing 5 лет назад

Hey man! So many times stalling will happen when you polish character lines on the car, so if I had my guess I would say that is what you are experiencing! Try putting even less pressure and spending even more time on those body lines!

@poeticjusticemacias9594 4 года назад

For us beginners. Jeez I almost feel like I got something against us newbies.. but I know your here to help.. so... At harbor freight they have a Bauer 6 in dual action 6speed deal. $109. This machine u have here is from Gyros and vmcan be found at Advance auto parts. $80. Your only really losing 1340 orbits per min on the machines. However u also have more vibrations on the Gyros one.. oh and the harbor freight DA is compared to the $300 Rupes brand.

@gmaail... 3 года назад

Is it true da will not burn edges? Because some people are saying to be careful when polishing edges even with da polisher but you are saying with da there is no risk of burning edges

@ljcruz127 2 года назад

I detail my own 30' motorhome. I've been using a Meguiers mt300, 8mm throw. This machine seems to small for large areas. Will a 21mm throw work better? Or a rotory machine?

@apster07 Год назад

How many passes do you do in one section? I can never get a clear answer of what is the "GO-TO" passes to make doing this?

@dagen_1 5 лет назад

thanks for your demonstration! i've been going too fast haha.

@vikingnorm6935 2 года назад

I bought a Kobalt 24 volt 1 the other day because I’m in the ecosystem, I just hope it works ok, going to try using 1 for the 1st time ever to get scuffs/scratches out of the wife’s CRV, she hit a pylon 🤦🏼‍♂️🤦🏻‍♂️

@nancydavila1481 3 года назад

I'm a novice at auto detailing (just for my personal vehicles). I recently purchased what's referred to as a beginners 6" D.A. Polisher and am confused about purchasing the right pads. What's the difference between a Polishing, Buffing and a Finishing pad? Thank you.

@enugomontoya6050 3 года назад

Usually by color. Yellow is compound, orange is polish, black is finishing with wax. No expert, that was what the pads in my DO polisher instruction manual stated.

@zanaga1901 3 года назад

What speed do you use seems like a 2 or a 3 like my rotary polisher I used it at. I remember when I used my rotary at a 6 speed it was too fast to control it but now have a dual action 5 inch polisher coming today so I will use it at a slower speed.

@CristianOrnelas602 2 года назад

I’m starting paint correcting and today I practiced all day on my red Mazda 6 2005. If you know Mazdas you know they have really thin paint. And okay I see you go at a medium speed on the polisher and your movements are slow. I tried higher polisher speed and slightly quicker movements and had good results. Is there anything wrong with my form

@degrootautocare9154 5 лет назад

Great video!! Speaking of entry level DA, I have a Porter Cable 7424 xp.

@wilsonautodetailing 5 лет назад

Boom! Great DA!

@RB54DaBears 5 лет назад

I've had great results with mine over the last 2 years. Remember the pad and polish play a huge role also👍

@jakesmith9509 3 года назад

How do you know how many passes to do? Do you work it in until it's gone or just 2 passes for example and then buff out?

@Antassium 3 года назад

Do test area, start with 1 or 2 passes. Clean with IPA wash and check results. If you think you need to add another pass or two, do so and repeat above. Once you determine the number of passes, move onto the next area and test that. Wipe with IPA and assess. Once you dial in the passes you need, proceed to the other sections. This can be applied for Wet-Sanding, Compounding and Polishing. Test, test & test.

@ejs3559 3 года назад

Can you use a foam/sponge soft polishing pad? Also do you increase the speed setting at all or did you stay at 3/4 the hole way through? Also is the idea to keep going until the polish/haze as disappeared and it starts to shine? That's when u stop and move to another area? Thanks

@shawnbond1975 5 лет назад

I have used that same DA to compound, polish, and wax my Ram 1500 crew cab. It literally took most of 2 days (the compounding was very tedious). Would a forced rotation model do the work very much faster?

@jonoklease5562 5 лет назад

Hey Luke, love your channel definitely one of the best for car detailing. I took delivery recently of a mk7 golf R, I understand it has hard paint to correct. I have a shine mate da 5" backing plate with hdo pads and microfiber hdo also a shine mate 3.5" backing plate with the same. As far as compounds I went with TLC (the last Cut). In your professional opinion will this work well. Going to coat it with kamikaze ism also do the proper decon you talk about. I'm only a driveway enthusiast but have done now 5 cars for friends and family and have turned out magic. Wash, decon, da stage and glass coat can do in around 20 hours. What is the best way to clean the rubbers on the outside around the doors? Always have a problem with that? Thanks Luke. Love from Gold Coast Australia 👍

@wilsonautodetailing 5 лет назад

Hey man I’m so glad you like the channel! So I definitely think that is a good strategy. I always encourage guys to experiment and try lots of different things kind of like you are doing. With runners on the exterior, degreaser diluted 5:1 would be my go to, if that doesn’t work it is difficult to say because there are so many different scenarios and TYPES of rubber so it is difficult for me to answer 😬😬 feel free to email me! Wilsonautodetailing3@gmail.com

@Crondar777 4 года назад

LMAO....@4:39 I am not moving faster than this...@8:09 he looks like the FLASH.

@diegovinicius5316 5 лет назад

Thank you Wilson. I'm a Brazilian hobbyist and I'm following your work. Did you like maxshine m15 ??? for hobbyist beginners?

@wilsonautodetailing 5 лет назад

Thank you Diego! And yes I love it! Great for beginners!

@randyunderwood2894 5 лет назад

hey there..luke, do you have a vid or advice on cleaning the inside of windows? like, how to reach them? i've tried some of those extending handle things but they have crap for material for cloth and all i get are streaks and swirls. i drive right into the sun every day and it can create issues with visibility. thanks

@robertmassucci1 Год назад

How do you get dried compound out of chips and pit marks? it turns white and looks worse

@19Clutch69 3 года назад

So how much pressure for vertical surfaces because the polisher weight isn't there

@ChromaticGarage 5 лет назад

Not to mention all that pressure turning pads into a crumbly mess. Great video! Love the Griots machines

@wilsonautodetailing 5 лет назад

So true!

@newfinishautospa Год назад

Was just focused on you denting the hood for the first couple minutes lol

@viperrcr Год назад

I noticed the first two passes were nice and slow and then the second two passes were much faster? Why? Does the faster passes at the end cause the polish to finish better? TIA!

@SupermanSpits 5 лет назад

Hey Luke, how many pads would we use typically on each car? and how would we maintain them?

@wilsonautodetailing 5 лет назад

I think a good rule of thumb is 4 pads, but that is just an average for me. I would say to maintain them just making sure you are washing them after every job you do, not literally after everytime you put it down, but when the entire job is done, making sure that you are washing the polish out and letting them dry... sometimes people overthink the pad washing thing

@stylesprettyworkdetailing2543 5 лет назад

The pad wasn't properly centered that why the polisher was walking if you will. Nice vid & info for what I call new Jack's to the world of detailing.

@wilsonautodetailing 5 лет назад

Thanks man! It was an on the fly video so sometimes I go quickly and skip a couple details to get the videos out

@EduardoSantos-qj4qg 4 года назад

THE BEST VIDEO FOR BEGINNERS!!!

@ianw73iw 4 года назад

Thank you. Very helpful for a novice..

@jdisdetermined 5 лет назад

Some great information and tips here. Would have saved me a whole lot of time and trouble had I watched this ten years ago as a beginner! 👍👌✌ I'll mention something I see a lot, and was guilty of myself, is working too large of a section. It can cause the compound to dry out before it's worked completely, or an arm speed that is too fast trying to manage it. Not efficient either way. 18"x18" should be the maximum section size for beginners, in my experience anyway. Residue control is also huge! You need to use the proper amount of product and blow out and/or brush your pads frequently between sections. It will perform better, with less dust and sling, and yield better results. Your pads will also last much longer. Claying before you polish helps a lot as well. Too much downward pressure will also destroy pads in a hurry. Finally, I must say, back when I first started out, I absolutely burned the hell out of an edge on a Ford F150 using only a Harbor Freight DA, M105 and a common orange cutting pad. Can't get more entry level than that. Very important to always work mindfully on edges when compounding, regardless of equipment configuration..

@wilsonautodetailing 5 лет назад

All very good input! I’d encourage people to read this!

@jdisdetermined 5 лет назад

@@wilsonautodetailing thanks man! 😀 I've watched a few of your videos and you seem quite experienced using ONR/rinseless wash. What do you think of the air injection thing? Using an air compressor and a paint gun to pre-soak and apply it? Worth it? It's a LOT of extra equipment to carry if you're mobile versus a simple pump sprayer..

@justinmyatt7109 5 лет назад

Hey Luke, weekend warrior here, also in middle tn. I want to test my hand at using a da, is there's one you could recommend in the $60-$80 range ? Thanks!

@agerman135 5 лет назад

Harbor freight polisher

@rickmarsh8199 5 лет назад

Love my Griots 6 inch as well as my Boss 21!

@wilsonautodetailing 5 лет назад

Yep! Both great polishers!

@randyunderwood2894 4 года назад

hey bud....i just do my own car. not a pro. i got a DA a couple years ago, worked gr8 the fist two times i used it on an older car. tried it the other day on the trunk of a new car and it would not spin at all with only it's weight. i had to lift it up to get it to spin. does that mean it's trash now?

@johnshell2480 5 лет назад

Your really patient. I want to do this but my car is a 2008 750i. It needs buffing bad! Would rotary be better? How do you decide? Thanks.

@marioskosmidhs9454 5 лет назад

Rotary needs a lot of experience to use it, and it.contains a lot.of dangers. If you are a bigginer a da i all you need. You are not trying to have show room resulta in a 2008 car, but you CAN have great reaults.

@johnshell2480 5 лет назад

@@marioskosmidhs9454 Great. Thanks for prompt answer. I appreciate it.

@wilsonautodetailing 5 лет назад

Rotary definitely would be ideal just because of how much correcting you can do, and heavy correcting at that, and it would let you be a little less patient because things move faster! And it would be a good project to learn how to use one!

@johnshell2480 5 лет назад

@@wilsonautodetailing Thanks. How can I keep from messing up with a rotary? Pads, pressure, etc.

@notfound-qg2ii 4 года назад

Use the flex 3401, it's a forced rotation da. Gets the job done much quicker but just as safe as a regular da polisher. Professional German tool.

@roberthenn3722 5 лет назад

Hi Luke, Thanks for the message to use M105 on the Vette vs D300 which left swirls. After watching this video, would you recommend I use an orange foam cutting pad or a microfiber cutting pad like you’re using? Is there a big difference in results? Your brother in Christ from snowy Kansas, Bob.

@wilsonautodetailing 5 лет назад

Hey man! Love hearing from my family in Kansas! I would recommend using an orange foam cutting pad, and REALLY taking your time. then following with any finishing pad you want with Meguiars 205 as a final step

@bobhenn1692 5 лет назад

@@wilsonautodetailing Thanks Luke. It's too cold here to do any kind of car work. I've got the Z06 in winter storage until mid March 2019. I'll take your advice when I get her out of storage. Keep the great videos coming! If I don't speak with you for a while, have a blessed Christmas and a prosperous 2019 my friend.

@Socalshortybulls 4 года назад

What's the appropriate speed setting to polish an acrylic aquarium?

@davidlammermeier4884 3 года назад

What speed setting do you use for polishing and applying wax

@bobjalockowitz1568 5 лет назад

Any tips for starting mobile detailing in the winter? (Northeast USA) Would offering interior services only until the weather breaks be viable to gaining customers and reputation?

@wilsonautodetailing 5 лет назад

That is definitely a good strategy! And one that I suggest for many people! Ill have to come out with a video about this in particular

@bobjalockowitz1568 5 лет назад

@@wilsonautodetailing thanks for the reply. I'll be waiting for that video.. Also, props on the video you dropped today about your journey/relationship with Christ.. God Bless brother.

@reinhardthattingh6628 4 года назад

So but now dude. How do you get into those "lips" with the DA? Because the moment mine goes over even a slight lip it stalls without any pressure

@yestallbobo 5 лет назад

Hey Luke, I’m new to paint Correction (Interiors were my main thing). Got a polisher, LC pads and HD Speed. Now although I got great results I could see faint ‘buffer trails’. I wasn’t putting pressure down ..... any idea why and also how to prevent this again?

@Easyazcarcleaning 5 лет назад

Hi Luke - Feel free to correct me on this... Yestallbobo, I think you will find that this is because; 1. Product, Use a good quality 'single step' compound (good for beginners). 2. Don't rush, be patient and let the compound and machine have time to do the work. 3. Keep your pad clean. Blow or brush the pad clean regularly. (I sometimes have my vacuum handy to clean my pad without messing up the clients garage.) I find sometimes, especially on black cars, I'll check my work and go over any little buffer trails I might have left behind with a smooth 'finishing' polish instead of compound. I'm still not the best at this (hence watching the video) but practice and you'll get there 👍 Thanks again Luke

@yestallbobo 5 лет назад

Thanks for the advice Easy Az Car Cleaning what would you call a “Good Quality” single step? Luke & other influential Detailers raved about HD Speed hence why I bought it. I actually did move this speed (shown in Luke’s vid) as I watched hours of Correction vids before buying. Also even when I went over the trails to get rid of em, in the process new ones would replace the old 🤦🏼‍♂️

@bbdetailing9123 5 лет назад

@@yestallbobo HD Speed (now 3D Speed) is a good quality product. There are so many variables to consider. But if you are seeing them on various types of cars, it could very well be technique. No offense. It really is hard to pinpoint without doing a test spot. Curious, what LC pads are u using?

@yestallbobo 5 лет назад

BB Detailing it was the LC orange cutting pads on a MaxShine M15 polisher. Also it was on a heavily oxidized black Honda that the Correction was done on. Swapped between 3pads for the entire car and used a microfiber cloth to wipe all the gunk out in between. Wash and clayed beforehand; car wasn’t wax for atleast 6years, performed everything in the shade (hope all this gives an idea)

@wilsonautodetailing 5 лет назад

Hey, both guys have given GREAT advice... the only thing I would add is this: what you may be seeing is not buffer tracts, but swirl marks that are now more pronounced because they are sitting on a shiny, lustrous background, because the paint is now popping thanks to the polishing and the HD speed, but because HD speed is a more light cutting polish, its not fixing all of the swirls, so when you are doing there are still some there, and now you can REALLY see them. I cannot say if this is what is happening for sure, but it definitely might be

@UnickDetailing Год назад

Great video bro thanks

@maximolotov 3 года назад

When you are trying to become polisher itself :)))))))

@thecapitalist2highoctane956 5 лет назад

I like the music you use.

@wilsonautodetailing 5 лет назад

Thanks!

@blackjack444.... 4 года назад

Yup 👍

@robertorodriguez6772 5 лет назад

What's the difference between the hex buffing pads compared to waffle and regular smooth foam pads ?

@wilsonautodetailing 5 лет назад

Hex pads supposedly spread the polish more and cause less to go longer. Whether or not that is true is another story

@bobhenn1692 5 лет назад

Another great WAD video Luke

@wilsonautodetailing 5 лет назад

Thank you Robert! Always enjoy reading your comments!

@johndelacroix9909 4 года назад

I think it'd be harder to keep non-forced rotation DAs spinning on non-flat panels or at the side where you are carrying the polish like doors.

@65obie 5 лет назад

I love your channel, you are amazing Luke! Keep them coming!

@wilsonautodetailing 5 лет назад

Thank you so much man!

@joshuaguillory1070 5 лет назад

Thanks for the tips and advice! I have some advice for you, Keep loving life 😀

@outdooradventures92 4 года назад

Hi I have just purchased a auto care Duel action orbital polisher but all other polishers I've owned have just had the fluffy pads. But this one has a mixture of sponge pads and fluffy pads. How do I no what pad to use and what for 👍

@kykypenn 3 года назад

How do you know how many passes to make with a polisher

@midnightmystery544 4 года назад

Very well explained!!!

@themachine8009 5 лет назад

What would the difference be between the rupes big foot and the griots? Horsepower. I’m confused.

@dossegundos7145 5 лет назад

Themachine size, more power, less or no vibration and noise. One is a random orbital, the other is a dual action isolating type polisher.

@remus421 5 лет назад

@@dossegundos7145 There both dual action, the rupes machine has a much larger throw as opposed to the griots having a much less throw.

@dossegundos7145 5 лет назад

remus421 yes, some people may have an issue with the types or names being used, perhaps random orbital is a different way of describing a DA ( I'm not a polisher gut knowledge expert) the bottom line is both isolate or do not use force rotation. I mentioned more power with a longer throw in mind, several Bigfoot models, 3 levels of higher power machines than the griots.

@bbdetailing9123 5 лет назад

Which Griot's and which Rupes? They both offer models in 21mm stroke, 15mm stroke, as well as others. Rupes also offers a forced rotation machine. But bottom line, it really comes down to user preferences (or cost!). Both brands are good

@wilsonautodetailing 5 лет назад

I would say the simplest way to say it is that the rupes is going to deliver FAR more power, FAR more throw, and FAR less vibrations.... it makes for way more correcting capabilities

@ambientsounds1416 2 года назад

I feel after using DA for so long I'd be better with a rotary for some reason. DA is slow and i am inpatient.

@sabinozarazua248 4 года назад

Thanks for the tip

@jayrobertson1689 5 лет назад

Excellent video

@yeisongaleano1127 5 лет назад

Something that I'm not clear yet is which pads to use how do you determine which one to use?

@bbdetailing9123 5 лет назад

Have several on hand. Doing test spots will guide you to what works good/best on the car you are working on.

@wilsonautodetailing 5 лет назад

Yep! Keep experimenting! That's what I do! I try to test as many pads as I can

@Divocwax 3 года назад

So what happens on a vertical surface like a door? Not so easy huh?

@CounterPunchNation 5 лет назад

I'm trying to get into polishing now. It just seems to me that at speed movements do slow that it would take me an entire day to finish a one step? How long should it take for a regular sized sedan?

@wilsonautodetailing 5 лет назад

It just depends man! Different paint, polish, polisher, pads, and your experience will determine all of that. I wouldnt be afraid! Jump in!

@Dg-zj6jo 4 года назад

nice job sir i had to put you on half speed to follow speech so quick speaking

@I_like_pears 5 лет назад

How come you didn’t use the Maxshine? I was going to buy the Griots, now looking at Maxshine instead based on your last review, but now wondering whether Griots is the way to go since you are using it for your demonstration (and you didn’t put it as a link to the products you use). Have you changed your mind about the Maxshine being the best DA polisher for a beginner (at this price point)?

@diegovinicius5316 5 лет назад

eu também quero saber

@bbdetailing9123 5 лет назад

The Griot's 6" is good. Get different backing plates (3" and 5") and matching pads, and you can do plenty

@wilsonautodetailing 5 лет назад

No i still recommend the max shine, I just used the griots here because I thought it would help explain what I was talking about here

@I_like_pears 5 лет назад

@@wilsonautodetailing Thanks!!

@johnpeake6653 5 лет назад

Love the vids...keep it up. Dude, you got to sell those shirts on your web site!

@wilsonautodetailing 5 лет назад

Thank you so much man!! I will work on that for sure!!!

@nick.100 5 лет назад

I have the 3in one and when I use the finishing pad it stalls when I’m literally just using the weight of it

@vincealince_SRT 5 лет назад

nick drop that one and get the 6” as well use a 3” pad. The 3” Griots is weak, it is good for headlight restoration and small spot enhancements that’s it imo

@nick.100 5 лет назад

VinceAlinceAble SRT headlights are what I use it for but the finishing pad is so soft that it creates to much friction when trying to use it