Тёмный

How to use vallejo Plastic Putty 

vallejocolors
Подписаться 77 тыс.
Просмотров 247 тыс.
50% 1

How to use Acrylic Plastic Putty by José Brito. It is a modelling paste which dries to a white, totally opaque, stone hard finish. It is used principally for rebuilding or restructuring models and miniatures, for textures and high reliefs.

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 212   
@terrydactyl2077
@terrydactyl2077 10 месяцев назад
I’m an aircraft maintenance technician for a major airline company and have found this stuff works great when reattaching a wing to a passenger plane that still has some gaps that needs filling.
@ED-qr1gh
@ED-qr1gh 4 месяца назад
Just can't belive that this sort of stuff is used for aviation repair...
@terrydactyl2077
@terrydactyl2077 4 месяца назад
@@ED-qr1gh I work for Boeing. Obviously.
@Cmdrcheswee
@Cmdrcheswee 4 месяца назад
😂😂😂
@WilliamEverhart
@WilliamEverhart Месяц назад
I think I have flown on one the aircraft you used this product on. 😮😮🤣🤣
@vallejocolors
@vallejocolors 22 дня назад
😂🙌🏻
@dudev
@dudev 6 лет назад
Great putty. It even worked to fill in the hole in my soul.
@kaysee88
@kaysee88 6 лет назад
Lol......how many tubes of the stuff did you use to do it?
@dudev
@dudev 6 лет назад
Just one. A little goes a long way.
@padelisgk8126
@padelisgk8126 4 года назад
Hello. I just started using this putty. I put it in the gap, and then with a small brush and water, lightly brush. When it goes dry it sort of has gaps here and there, like it has sunk in some places and others not,,,,could you help me? Thanks in advance.
@dudev
@dudev 4 года назад
@@padelisgk8126 --- You could try using less water and more putty. Or you may need to repeat the process several times to completely fill in the gaps, then sand.
@tonyromano6220
@tonyromano6220 4 года назад
dudev 🤣😹🥥
@voodoonights1671
@voodoonights1671 6 лет назад
This is currently my favourite filler. Easy to use and quick clean up. Some nice uses there that i had not considered.
@vallejocolors
@vallejocolors 6 лет назад
Thank you very much for your comments!
@jettoscranda
@jettoscranda 4 года назад
It is not good for sanding thick layers, maybe here in the video there are no problems cause the layer is extra thin, but if you use it like tamiya putty for example on scale model cars, and plan to sand it later you fill feel the rubbery stuff just tear apart and coming off like a chewing gum.
@stephanc2005
@stephanc2005 4 года назад
Great detailed video with lovely music. There's this little shop in my town where I buy all my Vallejo products. Even the buying is a joy, visiting the shop, talking to the owner and choosing the colors. Thanks guys, keep up the good work.
@Грей-х5г
@Грей-х5г 3 года назад
Высыхает в вязкую поверхность, абсолютно не шкурится. Как будто под видом шпаклевки продают обычную акриловую краску.
@gdcshow
@gdcshow 3 года назад
nice video but this music kill me
@vordanijczyk4419
@vordanijczyk4419 7 месяцев назад
For me, the best thing about your putty and wash is the lack of toxicity and indifference to health. I don't cough, my skin doesn't suffer, but I like acrylic products. More over, there is no problem with cleaning tools and the desk
@stockdoodle
@stockdoodle Год назад
I've been using this stuff all wrong. Super glad I found this video.
@vallejocolors
@vallejocolors Год назад
Hello Carl! Yayy, we are glad that you finally can enjoy it :)
@hectorsauvage7511
@hectorsauvage7511 4 года назад
Nice Harold Budd-esque track but you should really emphasize it is not a heavy duty Squadron putty type of deal somewhere in your advertising.
@iamaduckquack
@iamaduckquack 4 года назад
You say it dries in around 30 minutes (depending on thickness I suppose) so can I assume it is ready to be painted right away also? How is it at filling larger gaps?
@granander
@granander 6 лет назад
I use this, but did not know it was this versatile. Good stuff!
@matttheyak
@matttheyak 6 лет назад
6:49 cannot believe I had never thought of that before! Great video thanks
@acatellani
@acatellani Год назад
Estoy dando mis primeros pasos con Vallejo Putty, para rellenar gaps en aviones a escala. Quisiera consultar. cual es el tiempo recomendado de secado antes de lijar? Ya que en las pruebas que he hecho, al lijar la masilla aplicada se pela o bien se "arranca".
@pedroalbicastrense353
@pedroalbicastrense353 6 лет назад
really great , simply to use and so better than the products type Mr surfacer
@gundamfan2020
@gundamfan2020 4 года назад
does this stuff bleed or ghost through top coat?if not im so getting a batch of this.. however with tamiya kits and other well made and well cast kits putty is less and less required but im some cases it's necessary looks good.
@ReaverLordTonus
@ReaverLordTonus 3 года назад
how runny is this stuff? I have some resin casted miniature bases but they are lacking large enough areas that are flat and smooth for me to effectively glue my miniatures to, could I put this stuff on the surface and smooth it to fill in any nooks, crannies, or elevate the surrounding surface to the raised bits to make level flat patches?
@buckrogers7498
@buckrogers7498 2 года назад
Thanks for this video. I was doing it wrong.
@vallejocolors
@vallejocolors 2 года назад
You're welcome Buck, any doubt you may have we are here to help you :)
@kernell__
@kernell__ Год назад
what if the part I'm trying to fill isn't going to be painted or is very tiny? can I mix some model color acrylic paint with the putty prior to applying it to avoid painting the whole part?
@vallejocolors
@vallejocolors Год назад
Hello Kernell! It is recommended to apply the Plastic Putty after assembling all the parts and before priming. This approach offers a better option, as you won't have to paint the parts that you don't want, and the plastic putty will be concealed under the primer. Moreover, applying the primer provides additional protection 😊
@Deceter
@Deceter 4 года назад
What happened in the end? Music put me to sleep.
@BelgianDrummer
@BelgianDrummer 3 года назад
The butler did it
@angelreading5098
@angelreading5098 3 года назад
I am looking for a good putty and this one looks as if it may be the one,Squadron have messed up on the formulae on their once excellent product and I need to find an alternative quickly.
@darkwood777
@darkwood777 2 года назад
I find that it shrinks and falls out of gaps and seams. It lacks a good bond with the styrene, and crumbles away. It is easy to apply and cleans up well, though. I mostly use it on figures where the seams are short and not so obvious.
@groundsheet
@groundsheet 2 года назад
Have to agree... it does shrink and I also find it too soft to sand effectively, could be the amount of water I've used. It is easy to use, but I prefer other types of putty.
@krlecool8445
@krlecool8445 4 года назад
The ideas made this video great, the music sold this video.
@sion1885
@sion1885 3 года назад
i want to use this to fill in some panel lining on gunpla and planned to paint with lacquer based paints. will this hold up to the paint since its acrylic?
@wm302
@wm302 4 года назад
Hi Vallejo, I have the dropper bottle version of this. Am I right in thinking the putty is the same in both the dropper and the nozzled tube (shown in this vid)? Thanks.
@Cecilior
@Cecilior 4 года назад
No entiendo porqué no ponéis texto en español. ¿ Hay otro canal en español con estos vídeos ?
@davidhuwybarber2190
@davidhuwybarber2190 6 лет назад
The question that is asked in every Vallejo video...what is this music?
@vallejocolors
@vallejocolors 6 лет назад
Hi, The name of this song is Hydra.
@FowaDeLuz
@FowaDeLuz 6 лет назад
Took me a while to find which "Hydra" they meant. Here's a link. :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Z1k5T5Rlx1c.html
@HydroSnips
@HydroSnips 5 лет назад
:/ Looks good and I certainly like the way it can be worked with a brush, but how quickly does the nozzle get jammed up with dry putty?
@bloynik2353
@bloynik2353 4 года назад
thats cool and all, but can it be used for zimmerit as well?
@charleshenderson9578
@charleshenderson9578 4 года назад
Looks great how much?
@mp-modelplastic
@mp-modelplastic Год назад
Excelente produto, dá para utilizar para muitos efeitos. Excelente demonstração , grande abraço José Brito , sempre uma referência para mim. Cumprimentos do Porto - Portugal.
@vallejocolors
@vallejocolors Год назад
Thank you so much! :)
@gundamfan2020
@gundamfan2020 4 года назад
i've been pushing this product all over my twitter and to fellow modlers, this is a life saver if your scribing and make a mistake you wish to correct, or want to til fill gaps and make a kit look less 'busy'.. and it's cheap!
@RType2966
@RType2966 3 года назад
Love Vallejo products. and this music makes me want to start on another model.
@vallejocolors
@vallejocolors 3 года назад
Thank you so much!😊❤️
@john2856
@john2856 Год назад
Thank you , for this video👍
@vallejocolors
@vallejocolors Год назад
You're welcome John :)
@SwashBuccaneer
@SwashBuccaneer 6 лет назад
Great stuff. I've started to paint Warhammer 40k models and this stuff is great. Easy to use and clean up.
@fealtyknight1015
@fealtyknight1015 4 года назад
For the emperor!
@Condamine123456
@Condamine123456 4 года назад
I love the putty that much I even bought another 3 tubes off bna model world here in australia
@MERLK2
@MERLK2 4 года назад
Question - is ppe like a mask required if you want to remove excess of the putty through sanding? I ask because of the mention of resin on the tube
@The_Bat
@The_Bat 4 года назад
Used it for three months now, It even works for weld seams, let dry for 5 minutes before pressing weld pattern into seam with back of a hobby knife, or scalpel. Many thanks Vallejo.
@RobbertN
@RobbertN Год назад
Thanks for the great tip!
@The_Bat
@The_Bat Год назад
@@RobbertN You're welcome.
@theTutenstien
@theTutenstien 3 года назад
Really good putty. Tho I've watched the video atleast 20 times for the music lol so relaxing
@vallejocolors
@vallejocolors 3 года назад
Thank you😊💜
@pitoe
@pitoe 5 лет назад
Quizás habría estado bien añadir la imprimación a las figuras como último paso de cada ejemplo, para que viésemos como queda una vez imprimada
@spinster4000
@spinster4000 3 года назад
I love this putty because simply apply it to said gap, take a damp cotton bud /Q tip) and run it down the line and boom instant cleanup and your gap is filled,no need for sanding or anything it’s by far my favourite.
@vallejocolors
@vallejocolors 3 года назад
Thank you so much for your feedback!! We are glad you have great results with our Putty :D
@spinster4000
@spinster4000 3 года назад
100% the best on the market! It’s so good I can’t find it in stock at my local hobby shop haha, keep up the amazing products Vallejo!
@vallejocolors
@vallejocolors 3 года назад
@@spinster4000 thank you so much ❤️❤️
@phayzyre1052
@phayzyre1052 Год назад
For decades I’ve been looking for a better filler putty that’s more viscous and easier to apply and it looks like I just found it here!
@vallejocolors
@vallejocolors Год назад
😊💪🏻🔥
@paulbryson7021
@paulbryson7021 4 года назад
Watched this last night eny future soviet tanks will get the treatment thank for the information and emagination
@adandap
@adandap 4 года назад
Bought it, tried it, love it!
@fealtyknight1015
@fealtyknight1015 4 года назад
What if you move the part around? Wont it break?
@adandap
@adandap 4 года назад
@@fealtyknight1015 It's not supposed to go between moving parts. Just to fill gaps that aren't meant to be there.
@fealtyknight1015
@fealtyknight1015 4 года назад
@@adandap oh i know that but sometimes things happen, you know how finicky parts are lol especially on mecha!
@dirkfae9329
@dirkfae9329 Год назад
Thank you for this amazing product! Burned a dent in a PLA 3d printed plastic model with a glue gun, and this fixed it.
@vallejocolors
@vallejocolors Год назад
Yayy! What good news :) Thank you so much Dirk!
@tonyromano6220
@tonyromano6220 4 года назад
I have some being shipped for my Sherman cast parts, timely video thanks.
@Simonize41
@Simonize41 6 лет назад
A great putty and one I’ve been using for a while. Btw can anyone assist with the music used here? I love it and would like to buy/download it. Thanks.
@FowaDeLuz
@FowaDeLuz 6 лет назад
Finally found a link to it. :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Z1k5T5Rlx1c.html
@mattlutynski1192
@mattlutynski1192 2 года назад
so I picked up a tube of this putty not too long ago and I don't know if I got a bad batch or not. It didn't dry "hard" like with the Mr. Putty that I normally use, it was similar consistency to rubber cement or like trying to sand a rubber band. I applied it exactly like in the above video (straight from the tube and thinned with water) so I don't know what the deal is...any ideas or thoughts??
@vallejocolors
@vallejocolors 2 года назад
Hello Matt! It shouldn't dry with a rubbery consistency. Please, contact our colleagues in charge of info@acrylicosvallejo.com in order to receive some advice and let them know the problem you're facing with our putty. Thank you :)
@mattlutynski1192
@mattlutynski1192 2 года назад
@@vallejocolors thank you, I sent them a message and hopefully can get something figured out.
@mattlutynski1192
@mattlutynski1192 2 года назад
@@vallejocolors is there another way to contact them? I sent a message last week and still haven't received a reply and I'm getting a bit frustrated.
@LemurKrazy
@LemurKrazy Год назад
Had this as well and goes flakey when sanded. Decided it's a product that can't be sanded but ok for filling gaps with surrounding detail.
@nishhnishh1088
@nishhnishh1088 4 года назад
My car key is black plastic, this fills the damaged hole but what to use to color?
@rachellejanssen2655
@rachellejanssen2655 3 года назад
Just bought this stuff to fill in some gaps from my 3D printed scale models. Initially I was just wondering if I needed gloves, but this video game me a lot of ideas :) thanks
@vallejocolors
@vallejocolors 3 года назад
Hello Rachelle! thanks for your feedback! Our products and totally safe for use without gloves but some painters want to keep their hands clean all time 😊Also plastic putty is easy to use and you can clean your hands and tools easily with water after use.
@rachellejanssen2655
@rachellejanssen2655 3 года назад
@@vallejocolors oooh that's good to know, thanks for your reply :)
@AlbertoHM
@AlbertoHM 6 лет назад
wow no se me había ocurrido lo de la textura
@basketfullofholes9867
@basketfullofholes9867 4 года назад
What was that scrapper that you used to get the putty in the cracks?
@cjraven2399
@cjraven2399 5 лет назад
Gosh I just love how Vallejo putty comes out in a thin nozzle! Also great vid it was very helpful!😃
@flankerlistscalemodels3240
@flankerlistscalemodels3240 5 лет назад
Is it shrink when painted with lacquer paint?
@PanzergrauModels
@PanzergrauModels 6 лет назад
Good product; I use it regularly for my aircraft models. One thing needs to be pointed at: the demonstration with the tank turret is misleading: the putty it's not sandable. Other than that, great video tutorial!
@chrissyj.6783
@chrissyj.6783 6 лет назад
It's not easily sandable when done dry, in my experience it sort of tears away, but for wet sanding it's pretty good.
@PanzergrauModels
@PanzergrauModels 6 лет назад
Oh, thank you for heads up. I've try it dry only and yes, tears away or breaks in chunks.
@stephenbobby6715
@stephenbobby6715 6 лет назад
good video and good product
@pommfritz5810
@pommfritz5810 6 лет назад
Can I use it to make Zimmerit with the Zimmeritroller of AFV-Club?
@svenm.375
@svenm.375 4 года назад
Great Video,will try the putty
@ToyotaGuy1971
@ToyotaGuy1971 5 лет назад
This music sounds like something off of the "Against All Odds" soundtrack. The part where they are free-diving.
@stephanc2005
@stephanc2005 4 года назад
if you like it, look up Le Grand Bleu, movie and soundtrack
@tokoloshgolem
@tokoloshgolem 4 года назад
Non sandable. Not good.
@patrickmasse7159
@patrickmasse7159 2 года назад
Ce produit est vraiment efficace. Belle découverte
@vallejocolors
@vallejocolors 2 года назад
:) Thanks for your feedback Patrick!
@z3nk1001
@z3nk1001 3 года назад
I am working on a gunpla, and I am giving a try to this, so far, so good, fills the gaps and holes very very good! for small places is perfect! I am already in love!
@vallejocolors
@vallejocolors 3 года назад
Great! Thank you! :)
@이남수-l3q
@이남수-l3q 6 лет назад
Nice techniques bro, keep it up
@PGNogueira
@PGNogueira 6 лет назад
My favourite filler.
@kage7632
@kage7632 6 лет назад
fantastic video. bravo.
@DaveDFX
@DaveDFX 3 года назад
I'll try this someday. It looks like it's curing or clumping while brushing for gap filling. What is the work time for Vallejo Putty? I'm currently using Apoxie sculpt. Water soluble Epoxy clay no shrinkage. 1-3 hours work time
@vallejocolors
@vallejocolors 3 года назад
It is about 10-20 minutes. It'll cure just enough for you to scrape it off. Let it dry overnight before you start to sand, prime, or paint.
@alexsp7086
@alexsp7086 3 года назад
Can anyone please mention what kind of sandpaper grits are good for sanding this stuff down when doing seams. Thanks allot :)
@originalbaxio
@originalbaxio 3 года назад
How long till it is "well dry"? There are no drying times on the packet
@vallejocolors
@vallejocolors 3 года назад
Hello! It depends on each circumstance and studio. You should notice the putty has dried and become hard when touching it. You can wait several hours depending on the quantity of the product applied and also if you used water to thin it.
@gundamfan2020
@gundamfan2020 4 года назад
I swear by this stuff
@panoskapantais8775
@panoskapantais8775 Год назад
Thanks 👍
@vallejocolors
@vallejocolors Год назад
You're welcome Panos :)
@gladi4875
@gladi4875 5 лет назад
Der Mist ist bei mir drei tagen immer noch wie Gummi, vallejo hat echt nachgelesen und ich war ein echter Fan von denn. Hab aber schon ein besseren gefunden mit Farben und Zubehör.
@chucklamb3496
@chucklamb3496 4 года назад
Great video, very informative!
@cheebc9981
@cheebc9981 8 месяцев назад
I've tried this putty, after 3 days its still soft like rubber, not hard at all, and no way I could sand it. And I didnt thin it.
@vallejocolors
@vallejocolors 8 месяцев назад
Hello Cheebc! That is not the expected finish when applied and dry. Please contact our colleagues through info@acrylicosvallejo.com to get technical support! We want to thank you for your feedback and apologize for any inconvenience caused!
@sargesavage4359
@sargesavage4359 3 года назад
1:01 thanks 👍👍
@markmaccallum4192
@markmaccallum4192 Год назад
This guy's a pro though .
@megaflux7144
@megaflux7144 2 года назад
guessing its fairly toxic like the rest of the resins out there or you wouldnt be wearing gloves..
@vallejocolors
@vallejocolors 2 года назад
Our hobby products are definitely not toxic, more precisely this Plastic Putty does not contain solvents (water-based) and is not inflammable, nor ingredients harmful to health, so after this info pill, if you want to keep your hands clean then gloves are the best option😂 That's the reason why you can see the gloves use in our videos. Anyway, you can remove the dried plastic putty from your hands with a simple hand-washing with just simple water.
@danteyoda
@danteyoda 3 года назад
I wonder what sized wire that was on those handles..
@quantumplastic
@quantumplastic 6 лет назад
Great video of José Brito, (aka Smurfie hands)...... ;)
@germaN87AC
@germaN87AC 2 года назад
Could I use Vallejo plastic putty on foam / styrofoam / Styrodur? Will it "eat" into the foam?
@vallejocolors
@vallejocolors 2 года назад
Hello Jimmy! If you need to fill a big empty styrofoam space (for dioramas or bases) you can use 26.211 White Stone (Diorama Effects). In case you must fill a gap you can do it with our plastic putty due it is water-based, it won't eat the plastic.
@germaN87AC
@germaN87AC 2 года назад
@@vallejocolors Great to know about your White Stone product. I need to fill both large foam space as well as to close little gaps on foam. I will get both :D
@scaleacesmodeling116
@scaleacesmodeling116 3 года назад
Really love this putty. Great work vallejo!!
@vallejocolors
@vallejocolors 3 года назад
thank you so much!!😊
@everonrailways8399
@everonrailways8399 6 лет назад
I love this a putty.
@spinsqiggle
@spinsqiggle 6 лет назад
Q. Does it shrink at all once dry?
@gcw62
@gcw62 6 лет назад
It does shrink a little. I often have to reapply in some areas due to shrinkage.
@elpatrico2562
@elpatrico2562 3 года назад
I let it dry for 30 minutes, but it's not really solid, rather like it's made out of gum, and when I sand it, it just sticks to the sanding paper, and comes off. Do I have to add water before it dries?
@vallejocolors
@vallejocolors 3 года назад
Hello! No, the texture should not be made out of gum. It should dry and let you sand without problem.
@elpatrico2562
@elpatrico2562 3 года назад
@@vallejocolors Maybe I should wait more. I actually watched this video after applying the putty, and I did not clean off the excess, just let it dry as it is and sand it later, so it was thicker and dried slower. Thank you for the answear.
@vallejocolors
@vallejocolors 3 года назад
@@elpatrico2562 try to put a thin layer (just to fill the gaps) and clean the excess. Then let it dry very well and try sanding again. If you need help let us know ;)
@elpatrico2562
@elpatrico2562 3 года назад
@@vallejocolors Sure, will try on my second model.
@mobileandhostile7895
@mobileandhostile7895 5 лет назад
⭐️very helpful⭐️ Thankyou 👍
@miguelpuig5764
@miguelpuig5764 Год назад
Sirve esta masilla y/o tenéis otra en el mercado para aplicar zimmerit?
@vallejocolors
@vallejocolors Год назад
Hola Miguel, no tenemos ninguna más que esta :)
@donwest5387
@donwest5387 13 дней назад
I do the same thing with squadron putty
@vallejocolors
@vallejocolors 11 дней назад
Putty powah! 😉🙌
@germaN87AC
@germaN87AC 2 года назад
Does this Plastic Putty also work like a (super)glue to join plastic/styrene together?
@vallejocolors
@vallejocolors 2 года назад
Hello Jimmy! No, it doesn't. You will have to use another kind of product for that purpose; our plastic putty fills the gaps between the models' pieces and across the pieces' surfaces.
@germaN87AC
@germaN87AC 2 года назад
@@vallejocolors Thanks for your quick reply
@daviddruxius6011
@daviddruxius6011 4 года назад
can this Vallejo plastic putty actually also be used to imitate weld seams? in scale 1.16 !!
@vallejocolors
@vallejocolors 4 года назад
Hello. We are afraid ir cannot be used that way. It cannot be sculpted. Best regards.
@daviddruxius6011
@daviddruxius6011 4 года назад
@@vallejocolors it's OK ! let's see that I can make a rough rolled steel structure in 1:16 scale. Jagdpanther ,, sow-head aperture´´ .....Just one question, can I screw the tip / cannula to every tube, eg to a tube from AK Interactive Professional Modeling Putty ?? bought 3 pieces from Vallejo!
@zx749r
@zx749r 4 года назад
It can , i have used it for 1:16 weld seams. Just don't let it to dry completely before making weld pattern (i used toothpick).
@daviddruxius6011
@daviddruxius6011 4 года назад
@@zx749r Thanks !
@sturmhalo
@sturmhalo 6 дней назад
If this stuff dried solid and was sandable it might be useful. As is though it never seems to harden, is therefore not sandable and is easily peeled off due to very poor adhesion to anything.
@vallejocolors
@vallejocolors 5 дней назад
Hello Sturmhalo! Thanks for your feedback! You should not encounter that kind of problem with our Plastic Putty. Can you please let us know how you used it? Did you add water or thinner, and which bottle did you use? We'll try to guess what could have happened. Thank you!
@sturmhalo
@sturmhalo 5 дней назад
@@vallejocolors I wanted something as a replacement for Revell's Plasto mostly for filling surface imperfections. Bought the putty in the tube with the precision nozzel. Tried it on a few plastic test pieces, no water or thinner or anything added, just smoothed over. Like I say, doesn't harden, you can still deform the putty when "dry". It doesn't sand because it's rubbery and it peels quite easily especially when trying to sand it. Looked for reviews and advice and it turns out that's been the experience of many modellers over the years with this product. It's another disappointment with Vallejo, the other big one being the change in paint formula and especially the new paint bottles and caps but that's another issue entirely.
@vallejocolors
@vallejocolors 5 дней назад
@@sturmhalo Mm.. As previously said, those problems should not appear in our plastic putty. Please, contact our team through info@acrylicosvallejo.com They will kindly give you technical assistance for this issue and check with you what could have happened to your putty. Thank you for your collaboration! 😊
@Shadenuat
@Shadenuat 6 лет назад
Oh wow you can even water it and use as a texture. Now I know what to put on my bases as mud.
@Mishn0
@Mishn0 5 лет назад
expensive mud
@piotrdanielewicz455
@piotrdanielewicz455 Год назад
This putty is worst product I ever have.
@vallejocolors
@vallejocolors Год назад
Hello Piotr! We are very sorry to read about your experience with our putty. Could you please give us feedback so we can know what happened and the problems you faced with this product? We want to consider it and improve our products as far as possible, your help is esential. Thank you so much! 😊
@electroncreations5724
@electroncreations5724 5 лет назад
I use silicon sculpting tools instead of brushes to spread the putty.
@johnthaxton6354
@johnthaxton6354 3 года назад
‘Is
@HobbyLifeTv
@HobbyLifeTv 6 лет назад
I love this brand
@chucklamb3496
@chucklamb3496 4 года назад
Can the putty be used on metal models?
@adof7257
@adof7257 3 года назад
so, the putty can be thinned with water. so, does watter affect it once dry?
@briansrcadventures1316
@briansrcadventures1316 2 года назад
Yes. If you wash the model to remove sanding dust, the putty will go down the plughole....
@Paul_Sim
@Paul_Sim 5 лет назад
I want add korean subtitle vallejo tutorial video. Please allow me to add subtitles.
@statoilbensin2190
@statoilbensin2190 3 года назад
Wonder if this putty is without any solvent smell since it can be thinned with water. The current filler I use for cast texturing requiers me to use a filtermask and if I have to thin it I need a solvent witch also requires me to use my filtermask. Hope it is odorless then I will defenitly buy this after im done with my current filler.
@vallejocolors
@vallejocolors 3 года назад
Hello! You can use this putty withour mask, it is water based and has no solvants or strong odors :) And yes, it can also be thinner with water and sanded!
@statoilbensin2190
@statoilbensin2190 3 года назад
@@vallejocolors Thank you for the fast respons! Youre products are excelent and make the world so much easier for us modelers! Thanks Acrylicos Vallejo.
@vallejocolors
@vallejocolors 3 года назад
@@statoilbensin2190 Thanks!! 😊You're welcome! 💪🏻
@MrFelipefelop
@MrFelipefelop Год назад
Yeah err no, dont bother does a water based filler work on styrene,no,does a cellullose based thinner work on styrene sprue and create a 100% bond. I rest my case and it will save you a ton of money folks
@vallejocolors
@vallejocolors Год назад
Hello MrFelipefelop, we will be happy to help in case you have questions or doubts about our plastic putty for figures and miniatures :)
@MrFelipefelop
@MrFelipefelop Год назад
@@vallejocolorsplease dont ask a question with a question,can you answer the question
@vallejocolors
@vallejocolors Год назад
@@MrFelipefelop As said, we will be happy to help in case you have questions or need help with our Plastic Putty. We are afraid that we don't understand what are your doubts regarding this product.
@MrFelipefelop
@MrFelipefelop Год назад
Why do you ask me twice about your words"of doubt" that you keep arking on about to me. I have no doubt mate,if there is a better cellulose based filler with a fine tip,then great. But as it stands water based/acrylic fillers are a bit of a hit and miss affair like vallejo over time. Like I said in the first place mix your own and dont let them drown you with rhetoric or moan about doubt. Think clearly and study your options carefully,as it may ruin hundreds of hours of work. Thank you for your time ladies and gents. Being honest is a rare quality in this day and age
@vallejocolors
@vallejocolors Год назад
@@MrFelipefelop Then we don't understand the purpose of your comments, sorry. Fortunately, we have customers who are happy with the product and others who need our technical support. For those who need help, or need to solve if our product works on certain materials or not, or how to use it, we will be there without a doubt! 😊Until then, we wish you a happy day and thanks for your feedback! ☺
@tacdad
@tacdad 5 лет назад
how long do you wait to use the water and brush as thinner? or do you do it immediately?
@vallejocolors
@vallejocolors 5 лет назад
You can use it immediately. The flow is great and you can reach/ fill the most recessed spots, as also add all kind of surface textures.
Далее
Model Making Techniques #2:  Applying Putty & Sanding
13:31
How to use Vallejo Liquid Mask
7:42
Просмотров 181 тыс.
Vallejo Plastic Putty: A Review
5:23
Просмотров 10 тыс.
Hobby Cheating 221 - How to Create a Gap Filling Slurry
14:31
Vallejo Water Textures
9:08
Просмотров 270 тыс.
How To Make A Churchwarden Pipe
10:30
Просмотров 171 тыс.
Vallejo Pigments on models and dioramas
10:08
Просмотров 254 тыс.
How to use Milliput to fix everything! BIG trick!
8:09
Vallejo Plastic Putty
10:04
Просмотров 51 тыс.
I Made A Realistic Factory Facade From Styrofoam!
31:55