Husky 72"X36"X18" Garage Cabinet Assembly Video 

Awesome John, keep me posted on how you make out 👍

You're welcome 5150 Time, I need to make more like it 👍 Thanks for the feedback😊

Awesome Kieth, let me know how you make out. Cheers 🍻

You're welcome Ross, it is very sturdy compared to some of them out there. Let me know how you make out, thanks.

Absolutely Eric! Let me know how you make out, thanks.

No problem Sam, thanks for the feedback 😊

You are welcome Pratap Portland, Glad it helped 🍺

You're welcome Carl, thank you for the feedback👍

You're welcome

Awesome Tony, Yes, usually leveling the cabinet will straighten out the doors. Thank you for the feedback, I really appreciate it 👍

Was the issue with squaring or the feet? About to do mine and wanna be aware of any issues to come.

😂 Too funny, you're welcome Ahha! W.

Thanks AssemblyMasters, I hope you're rocking it out there in Cali, it sounds like you got a pretty good gig going out there. Cheers 🍺

You're welcome Robert, let me know if you have any questions.

Hey Brian, It hides the junk that would normally be on an open shelf lol. Now I just need 3 more 😊

You're Welcome! 🍻

😂🍻👍Michael, I'm glad someone caught it! 🤣

Thanks Dan lol, glad you found this helpful 👍

Try setting it up on the box it cam in jj.

Hi Anthony, my cabinet didn't come with protective plastic, weird?

@@EddieCarrara1 Thanks for the video. Are you sure it didn’t? It’s on there so good that you can hardly tell.

Hi Luis, there are 6 positions in my cabinet, all equally spaced.

Sounds good👍

Hi Dennis, are you talking about the plastic or do you have glue? The plastic I just removed and used some rubbing alcohol to remove any sticky residue.

Hi Corey, they would definitely have to make a scene to break in lol.

Hi Yvonne, You might want to attach the hanger rod to the shelf because I doubt the compression rod will hold against the walls, you'll end up pushing the sides out. Let me know how you make out.

@@EddieCarrara1 Thanks for the good suggestion.

Hey Roland. I think that's a great idea, I recommend using rivet nuts to install the wall panels, it will definitely give the cabinet more stability. I put a link to the inserts and tool I'm talking about, if you buy through my link I make a small commission but that's not why I'm sharing, we use these rivet nuts to install all kinds of accessories on vehicles like step bars, roof racks and truck bed accessories, they make your projects look professional and super strong. Let me know how you make out, thanks! Cheers 🍻 amzn.to/3JxogVb

@@EddieCarrara1 amazing recommendation. Looks like doing it this ways keeps it pretty uniform of how the rest of the cabinet is put together. I'll get after it and post it when done, thanks a ton!

@@RolandRoams did you ended up using your cabinet as a gun storage? Thanks

That's a damn good idea! Got a couple mounts for my Milwaukee and DeWalt drill and battery system. Wasn't sure how I should incorporate it into my cabinet. Was gonna just attach to scrap wood and hang off pegboard with L screws. But the Mount is metal I think I'll rivet it up. Thx.

It looked like a ratcheting screwdriver or a ratcheting bit driver.

@@jorgecoronajr1814 Thank you!

Thanks Jorge, yes it was 😊

Hi Manuel, there is no bracket for mounting it to a wall and the front would probably sag after a few shelves are full. Maybe you can build a shelf under it to support the bottom?

Hi Ian, about 80'' X 20'' X 20'', very well packaged.

Thanks man you're video is better than the other guys you explained better and showed front vs back thanks again buddy

@@leobermudez1043 You're welcome Leo, it's nice to know my explanation has more detail. I'm working on making them even easier to follow 👍. I really appreciate the feedback 😊

I didn’t actually torque them, but if I were to guess it be any anywhere from 7 to 9 foot pounds. I made sure the cabinet was straight once it stood up and the doors were aligned then I just tightened all the screws in the backside of the cabinet.

Hi Michele, This is a pain but if you loosen all the screws that hold the back panels tight it will probably come back into square lol, but that's a lot of screws 😳, it will be worth it 🍻

@@EddieCarrara1 Thanks Eddie!

Hi Jeff, it's just like new after two years, no issues, water and snow splash on it from my truck in the winter, and no rust. Great cabinet, I'm buying 2 more to hide the clutter in the garage lol.

@@EddieCarrara1 Thanks!! I'm looking into potentially getting two of them for all my automotive specialty tools with cases. This looks like they will work out well.

@@jeffreygwinn5081 They come in different depths, mine is a 36''W x 18''D x 72''H, my next two will be 24''Deep for more storage and the price doesn't change much, sometimes you can find the larger one on sale for less money than the smaller one lol.

@@EddieCarrara1 I'm going for the deeper cabinet to match my oil and coolant shelving. I like symmetry where possible. On top of that, a few if the cases are longer.

@@jeffreygwinn5081 I hear ya!

It comes with an Allan wrench driver with the hardware.

Hi Chris, If I wasn't creating the video I would have to guess about an hour and a half. 😂

Hi Shauna, It will take a couple hours if you take your time and follow the video.

@@EddieCarrara1 thx. Definitely helps with assembly. I've never been a manual girl.😂

@@shaunatate7740 you are now lol. 🤣

Hi DGO, you could use a hand truck for like moving packages, pick it up with two people or simply just slide it.

It comes with the tool Disarmyou84

It probably would have taken 1.5 hours if I wasn't making the video. I bet it would have taken me 30 mins if I had watched my video first, but it didn't exist yet 😂

@@EddieCarrara1 hahahahahaha oh man that’s funny. Ok thanks, goin to buy one today and assemble it.

@@disarmyou84 I couldn't resist 😂

Hi Ben, you'll need to loosen all the rear panel screws in order for it to straighten out, sucks! I know ☹️

@@EddieCarrara1 is something like that caused by not being squared? Just curious.

@@shaunatate7740 Hi Shauna, yes that’s why you need to leave everything loose until everything is together then go back around and tighten everything while you square the doors. The doors are key 🔑.

Most of my videos are like that lol. I need to stop talking and get to the point. I'm working on these improvements.

Hi Aruna, If you didn't put in the security tabs all you have to do is lift the door on the hinge side.

Come-on! it's not a lot of work lol.