Тёмный

Hydro Assist, Custom steering and first drive of the Solid axle swapped S10! 

Muddy Beards 4X4
Подписаться 58 тыс.
Просмотров 12 тыс.
50% 1

In this video we do a steering box swap to the Astro van gear box. We drill, tap and install the DIY4X hydro assist steering box cap. Install a grand Wagoneer pitman arm and wrap up the custom steering. I go for a first test drive and have to fix the wondering front end by adjusting the caster. We are getting super close to hitting the trail with this truck!
Check out our website: muddybeards4x4.wixsite.com/my...
Amazon Store: www.amazon.com/shop/muddybear...
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo...
yeswelder.com/?ref=dVU5yUQ6
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards4x4” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/...
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Авто/Мото

Опубликовано:

 

23 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@albertdevito733
@albertdevito733 Год назад
Ditch that rag joint and put a jeep steering shaft in it. Made the steering feel so much better having a u joint instead of the rag joint
@lukeromeril2052
@lukeromeril2052 Год назад
I had a old cj7 that wandered and got super squirrelly on the road, shimmed the front end to get positive camber and changed my life haha.
@vavendano2000
@vavendano2000 Год назад
i went with positive 8* caster on my jeep and it worked out beautifully. ive always heard the more the better.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Yup, especially with big tires. Once I flex out the front to full droop and check my pinion angle. I will see if the driveshaft can take a few more degrees.
@DumbCarGuy
@DumbCarGuy Год назад
Dang. You gave that thing grocery cart caster. Good thing the hydro assist was there to not let you death wobble into the nearest tree.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 true
@firstwordcar
@firstwordcar Год назад
Thanks for putting the part numbers and model years for the box and pitman arm. Forums leave me with more questions than answers when I go down the “Astro box” rabbit hole haha That thing looks sick, make me want to front axle swap something 😂
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
I went down that same rabbit hole, lol. SAS is a ton of work but worth it👍🏻
@4xhoser
@4xhoser Год назад
Such a sick build & series 🤘🤘🇨🇦
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👊🏻
@jeepindave5464
@jeepindave5464 Год назад
Awesome Kelly. Need to get a s10 extreme decal and combine it with the zr2 sticker. 😅
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣… probably not, lol.
@smashedfootlefty4726
@smashedfootlefty4726 Год назад
@@MuddyBeards4X4 extreme and zr2 were no Bueno, good call!
@smashedfootlefty4726
@smashedfootlefty4726 Год назад
Congrats man! Always a good feeling driving something you built for the first time! Can't wait to see how this thing turns out!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks, for sure.
@MacsSpecialitiesMotorsports
Agreed!!
@thousandoaksauto1696
@thousandoaksauto1696 Год назад
Cool! Learn a lot. Thanks for the video!!!
@212caboose
@212caboose Год назад
Hell yea! Congrats! Such an awesome build!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👊🏻
@paulezk
@paulezk Год назад
Dude it looks so sick! Great work so far!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👍🏻
@tdwz1652
@tdwz1652 Год назад
haha your tippy toe driving reference was perfect
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
😂 thanks
@bonespur2728
@bonespur2728 Год назад
Badass! This thing is so rad.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👊🏻
@savagereviews7212
@savagereviews7212 Год назад
Can't wait to see this beast wheel
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤟🏻
@raystevens687
@raystevens687 Год назад
Thanks I appreciate what your doing with your truck 🚚 great job.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 👊🏻
@cb.offroad
@cb.offroad Год назад
Happy for you dude! This build is so cool. 🤟🏼
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks man, it was a bummer I didn’t make it out to ejs with you guys, but I am slowly getting there.
@cb.offroad
@cb.offroad Год назад
@@MuddyBeards4X4 don’t build it fast, build it right. It’ll be worth it. 🤟🏼
@jannepallari4697
@jannepallari4697 Год назад
You do good!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
👊🏻
@MacsSpecialitiesMotorsports
How many looks 😍did you get on your first test drive in the s10 Rocklander? BTW thanks for showing us how not to set your caster on the SAS setup 🤣
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Haha, you’re welcome. It hasn’t been driven out in the wild yet, just in the neighborhood. So we will see this weekend. I will start driving it around and testing.
@MacsSpecialitiesMotorsports
@@MuddyBeards4X4 😁
@davidrochonjr6757
@davidrochonjr6757 Год назад
Kelly are you going to build a double sheer on the pitman arm? I would if have the room to do so.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Not right now, maybe in the future. The ram is going to take up a lot of the force. If I had no hydro assist I wouldn’t do it without double sheering the pitman arm.
@JW-cn6op
@JW-cn6op Год назад
I usually try setting my caster at 5-6deg that 3deg seems a little short.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
It is a 5 degrees, I want a little more but I am constrained by my front driveshaft and pinion angle.
@JW-cn6op
@JW-cn6op Год назад
If it was say 8" longer you could get the extra couple deg you want..Like a reduction box added in there.haha
@1emt95
@1emt95 Год назад
​@@MuddyBeards4X4 not sure if you can get offset upper balljoints to get more caster but if you can that might be an option
@e954rr2
@e954rr2 Месяц назад
What brake master cylinder are you using s10 or a 1ton
@MuddyBeards4X4
@MuddyBeards4X4 Месяц назад
Stock master, with the abs module removed. Could be better, but stops just fine. So I haven’t messed with it.
@mountmaple
@mountmaple Год назад
Should of went with electric power steering with a manual box.
@arccaptain-weld
@arccaptain-weld Год назад
Good job! Would you like to review our welders? We would like to send you for free, we believe you will like it😁
Далее
Hydro Assist the Easy Way
19:12
Просмотров 160 тыс.
This or That 🛍️
00:52
Просмотров 9 млн
DIY Weld on High Steer (XJ 1 Ton Swap)
13:10
Просмотров 11 тыс.
Ultimate Solid Axle Chevy S10 Rock lander build!
11:35
Skyfall mit dem Auto 💨💥 #crash #pov
0:26
Просмотров 18 млн