I Sampled My Tama Club Jam, Converted It & Upgraded My Electronic Drum Kit

Подписаться 21 тыс.

Просмотров 25 тыс.

50% 1

Upgrading my electronic drum kit, recording / sampling my new drums & acoustic to electronic drum conversions are all in a day's(ish) work at The eDrum Workshop.
TCJ Bop Now Available for
► Roland TD-50X - • TCJ Bop | Roland TD-50...
► Roland TD-27 - • TCJ Bop | Roland TD-27...
► Roland TD-17 - • TCJ Bop | Roland TD-17...
► New kits for your Roland TD-50X - theedrumworkshop.com/td50x-kits
► New kits for your Roland TD-50 - theedrumworkshop.com/td50-kits
► New kits for your Roland TD-27 - theedrumworkshop.com/td27-kits
► New kits for your Roland TD-17 - theedrumworkshop.com/td17-kits
► New kits for your Pearl Mimic Pro - theedrumworkshop.com/mimic-pr...
► The BEST WAY to Use VST Samples Inside a Roland TD-50 TD-27 TD-17 Module - • BEST WAY to Use VST Sa...
► How To Make Roland Drums Sound Better (Playlist) - • Pad EQ | How To Make R...
Make your snares POP with The eDW Snare eLements Sample Pack - theedrumworkshop.com/edw-elem...
Compatible with
► dbdrums nPad, G4M DD90 Digipad and HXW PD-705
► Roland SPD-S, SPD-SX, TM-6 Pro, TM-2, TD-50, TD-27, TD-17
► Alesis Strike Multipad, Strike Module
► Yamaha DTX Multi 12
► Pearl Mimic Pro
Thanks to Dan at Rock Hard Studios for the microphones for this sampling session - www.rhmg.co.uk/
Great electronic drum related products* -
► ESR Bike Phone Holder (mount phone to drum rack!)
Amazon US - amzn.to/3k2qZbY
Amazon UK - amzn.to/31035qo
Amazon CA - amzn.to/2TiGrVy
► Sandisk Cruzer Fit 32GB USB 2.0 Flash Drive
Amazon US - amzn.to/2XoLAwW
Amazon UK - amzn.to/2XndIk5
Amazon CA - amzn.to/3m4z8xs
► Samsung EVO 32GB Micro SD Card with SD adapter
Amazon US - amzn.to/3yQ9Sku
Amazon UK - amzn.to/37jep4I
Amazon CA - amzn.to/3oa8Ons
► KZ ZS 10 Pro In Ear Monitor
Amazon US - amzn.to/2XoW9QD
Amazon UK - amzn.to/2ZrjCU8
Amazon CA - amzn.to/3m2XXtk
► 8 Core Cable Upgrade for KZ ZS 10 (optional upgrade)
Amazon US - amzn.to/2B7HxxH
Amazon UK - amzn.to/2ZLVDiO
Amazon CA - amzn.to/2FGZnKA
► New Bee Replacement Foam Ear Tips for KZ ZS10 Pro
Amazon US - amzn.to/2B535eh
Amazon CA - amzn.to/3jcodjj
► INAIRS AIR2 Replacement Foam Ear Tips for KZ ZS10 Pro
Amazon UK - amzn.to/3h2RpbR
► Gibraltar GEMC Clamp (mount laptop, multipad, mixer etc)
Amazon US - amzn.to/318fkkB
Amazon UK - amzn.to/344PvE5
Amazon CA - amzn.to/37si2W7
► Evans EQPB2 Nylon Patch (choice of double or single pedal version)
Amazon US - amzn.to/2ZrjyUo
Amazon UK - amzn.to/2LQOHbJ
Amazon CA - amzn.to/35nUZZF
► Gibraltar SC-EMMP module mount plate
Amazon US - amzn.to/3lyJoxG
Amazon UK - amzn.to/318VCVW
Amazon CA - amzn.to/37m4MlV
*These links are affiliate links - they help support the channel by giving me commission on sales, at no extra cost to you!
Want to learn how to improve eDrum sounds and get the best out of your electronic drums?
► Using eDrums Live Playlist - • Why You SHOULD Use Ele...
► Sound Design Playlist - • Roland TD-50 | How To ...
► First Impressions/Products Playlist - • Alesis Strike Pro Spec...
► Other eDrum Discussions Playlist - • Why Your eDrums Can Fe...

Видеоклипы

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@TheeDrumWorkshop 2 года назад

02:36 - cheeky li'l catch

@Stephendohringphotographer 2 года назад

Why didn’t you get the electronic drum rug with the cables holes?

@protobuster12 2 года назад

Nice video! I always like it when people sync the editing with background music because not only is it fun to watch but it takes more work and I appreciate it. Just little things like that are when you know people put effort into their videos :)

@TheeDrumWorkshop 2 года назад

Thank you! 🙏 Yeah, as soon as I started doing that, I realised how much better things flowed and now I can't stop 😅

@Timme15 2 года назад

I read your comment and at the same moment I checked the video for sync and it was nsync, awesome !!! 🔥🔥🔥

@juanonline 2 года назад

Thanks for the video! I'm planning on building a similar kit; and this video is the proof that it can be done.

@stevengonzalez4111 Год назад

Very nice my brother and well done! You are inspiring. I have some modifications I’ve been wanting to do to my drums for some time now but been putting them off. I think I’ll go ahead with them. You truly are “ the man”. Your kit looks great BTW.

@sameinsohn6187 2 года назад

I love the drone triggers. Have one in my bass drum and it’s awesome. I also really like how the wraps came out. The difference in silver tones is noticeable but still charming. You should be proud. It all looks great together. Inspiring.

@TheeDrumWorkshop 2 года назад

Ahh, thank you so much! 🙏 Yeah, I'm a big fan of the DRONE triggers! They work well and feel great.

@pauldrumstimelessmusic1069 2 года назад

Great video Luke. Really enjoyed it!

@bobbyjones2112 2 года назад

Beautiful kit!

@Rhythmic1 2 года назад

Really cool!

@jowelmoisesubana7572 2 года назад

Superb!

@marknorton2429 2 года назад

I've never watched this video before. Good to see you have some DIY in you!

@WardenOnDrums Год назад

My man this is a great idea 👊🏼

@thechristinedemeo Год назад

Wow! That was such a cool process to see. I’m inspired to try and change the wrap on my drums!

@TheeDrumWorkshop Год назад

I'm glad you enjoyed it! Definitely give it a go if you fancy a change!

@demonicsweaters 2 года назад

Great job Luke!

@EqDior 2 года назад

That kit looks fantastic!

@TheeDrumWorkshop 2 года назад

Thank you 🙏

@thumb_bass_guy 2 года назад

Enjoyed the video. I can see your video editing and production game has gone up.

@TheeDrumWorkshop 2 года назад

Thank you 🙏

@bobbyjones2112 2 года назад

Well they sound damn good that’s for sure!

@trogwarrior5908 2 года назад

fantastic video 👍

@TheeDrumWorkshop 2 года назад

Thank you! 🙏

@alereggi 2 года назад

Good Job. I hope soon people can make own drum modules. Cheers !

@TheeDrumWorkshop 2 года назад

That would be great!

@williamperri3437 2 года назад

I'm back! Just subscribed... Was surprised I wasn't. This set sounds great! Right now I'm trying to figure out whether I'm getting the Yamaha/Tama or PDP mini bop kit. Yamaha has that FT snare but I've only heard it sound good in one or two videos. And then there's Tama... I feel like Tama and Yamaha have incredible quality control but Tama has them beat right now with finishes.

@demonicsweaters 2 года назад

haha, nice now you have my same kit! I'm using all external triggers though so I can easily swap back to acoustic!

@TheeDrumWorkshop 2 года назад

I noticed that on one of your videos the other day! Great minds 🤓

@SchwappSchwopp 2 года назад

That's a great conversion! I'm looking for a used tama club jam for a while to convert it, but I didn't find one yet. Do you know other kits which have the same sizes, especially for the bass drum?

@viames Год назад

It's a very inspirational project, thank you! I'd like to know the electronics that connect the Roland Head Trigger Basket's piezos to its USB output connector, but I've never found a schematic. Would you be so kind as to explain it in a next video?

@JCReyesJCRACING 2 года назад

Wow!

@ny020 2 года назад

What an awesome looking kit. One day I will get myself an a2e. This was inspiring.

@TheeDrumWorkshop 2 года назад

Thank you! 🙏

@ny020 2 года назад

@@TheeDrumWorkshop Question. I saw you take the digital snare trigger out and wrap the shell. Is it possible to take that trigger and place it in a different snare shell all together? Or are there complications with doing that?

@TheeDrumWorkshop 2 года назад

Yeah, pretty sure you'd be able to. The main thing to watch out for is probably that little white plastic insert that holds the trigger in place in the shell. There's a chance it might move about without that, but it also might not, I'm not sure haha! Pretty sure people have mounted other Roland baskets in their acoustic shells successfully before.

@ny020 2 года назад

@@TheeDrumWorkshop Thanks for the wealth of advice you always provide. I will experiment and find out!

@manueldossantos3461 2 года назад

Nice video! Where did you buy the drone trigger? I want convert my acoustic drum and that seems to be a good idea. Thanks!

@danieltaylor4728 2 года назад

Great video, it would be nice to see how you case that kit for transportation to gigs?

@TheeDrumWorkshop 2 года назад

I haven't worked that out yet because I haven't been gigging. I was using the 16" conversion and an Alesis Strike floor tom pad when I was gigging before and it was a tight fit in the cases, not gonna work for this!

@PhdFloat 2 года назад

Do you have any videos explaining the triggers you use inside the drums? I’m trying to convert my own tama cocktail-JAM kit but the upside down bass drum is proving to be difficult. Inside sensors like you have would probably be my best bet

@shayshay_triple Год назад

Question about the drum riser. When I use a bass drum lift, the beater goes way beyond 90 degrees. How did you get the riser and the beater to work so they can hit approx 90 degrees? When I get the pedal closer, the chain of the pedal starts to hit the rim. Thanks!

@demonicsweaters 2 года назад

just got a chance to watch the full video. LOL THOSE MICS!!! haha, that's some serious high fidelity! Samples came out great! Those Club-JAM mini kicks actually sound quite amazing acoustically. BTW, where did you get the hoop guards? I'm using the pintech rubber stuff, which kinda sucks. Those look much nicer.

@TheeDrumWorkshop 2 года назад

Haha I know, right? Something like £15000 worth of mics for some "decent" sounding samples 😂 using a better room would have yielded the best results but it did the job for my first go haha! The hoop guard is actually just an Evans EQ patch, the nylon one (same as I used on the head). Was just improvising with what I had!

@jesuacontreras1946 Год назад

Hello friend I want to ask you, how did you do or where did you buy the triggers?

@mo_ackermann 2 года назад

Awesome man! What sizes and depth are the toms? Everything looks good together. Well done.

@TheeDrumWorkshop 2 года назад

Thanks! 🙏 The rack tom is 12x5, first floor is 13x6 I think, then 14x5 for the second floor. The side snare is 13x7. I realised after putting it all together that every tom conversion was original a snare drum!

@fuzzypoet19 Год назад

Amazing and informative, as always. Question: Where did you get your maple ddrum wrap? I'd like to eventually refinish my kit.

@TheeDrumWorkshop Год назад

I got it from eBay and I believe the search term/name was something like "cinnamon cherry woodgrain". It's just a vinyl wrap which is self-adhesive, so not a "proper" drum wrap and I just wrapped over what was already on the drum. It was nice and cheap though, got enough left to do more if I need to.

@Ozterkvlt 2 года назад

Nice, where did you get the shell wraps from?

@TheeDrumWorkshop Год назад

I got 2 of them from eBay - the "cinnamon cherry woodgrain" and "Oracle 8300 tint" wraps. The glitter wrap came from a local store. All of them are just cheap self-adhesive vinyl wraps.

@bmonell 2 года назад

How do you like your new drum carpet? Been shopping around for one and would appreciate your thoughts on it. Thanks!

@TheeDrumWorkshop 2 года назад

It's ok. To be honest, I thought it would feel better quality for the money (around the same price as the Protection Racket one I have for my acoustic kit and that is noticeably hardier).

@tsapree 2 года назад

Nice video, thank you! What hihat trigger is used? It's new one, on regular hihat stand version - lemon or roland or something else?

@TheeDrumWorkshop 2 года назад

Thanks! I'm using the Goedrum hi-hat controller, along with a Yamaha PCY135 cymbal pad (just the pad, their hi-hat controller doesn't work on Roland modules). I usually use an FD-7 foot controller and have been using a Lemon 15" cymbal as my hi-hat for a few months, but I fancied swapping back to the Yamaha when pairing it with the stand.

@tsapree 2 года назад

@@TheeDrumWorkshop thank for answer ;)

@jedidiahgrooters9963 2 года назад

I've got a Tama kit I'm not using, considering converting it to full electronic. It'd be for live performance, so I'd want it to be as good as possible, but am also strictly budgeted and lost in the options of triggers. What are your bullet point recommendations? Ease of installation is also a fairly big deal, as I'm completely inexperienced in this.

@gpcr01bb84 2 года назад

Also interested in your view on this ! 😁

@alvinrhodes1534 2 года назад

I see in this drum set you use yamaha cymbals for hihat, is this compatible with the Roland module?

@TheeDrumWorkshop 2 года назад

It is, though it's a hi-hat cymbal pad with the Goedrum controller (Yamaha controllers don't work with Roland). More about it in this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WP8isQvO0Go.html

@TheBenacaster 2 года назад

Where are you buying the DRONE triggers? Having a hard time finding them for sale!

@TheeDrumWorkshop 2 года назад

I bought them directly through Mike from DRONE. I spoke to him over Facebook messenger from his DRONE Trigger System FB page. He doesn't use FB all the time so might take a while to respond and I think he either just makes to order these days or makes some of them and sells what he has, not 100% sure. He also sometimes puts stuff up on eBay under the seller kittoys-2012

@ryanmaurer2630 2 года назад

In the clip at the end are you layering internal sounds with your samples or is it only samples?

@TheeDrumWorkshop 2 года назад

Internal sounds and my samples!

@kevinbothwell8425 2 года назад

I already own a club jam mini that im thinking of converting. Do you have any affordable recommendations that require a bit less elbow grease for kick drum conversions?

@TheeDrumWorkshop 2 года назад

I've not tried a ton of kick triggers, but I reviewed an Oval one that was cheap and worked well a while back. I've not used the Jobeky ones but they seem quite reasonably priced. A lot of the available options should most likely perform pretty well, kicks are the simplest kind of trigger since they're just one piezo that can be offset, unless you're aiming for some kind of larger dampening solution.

@johndef5075 Год назад

I made a 20" conversion with a Silentstroke head. 2 pillows inside. Evans eq patch to protect head. Ported front head. Roland rt10k external trigger mounted at 12 o'clock. Triggers surprisingly well and is very quiet. Feels as good or better than the kd140 and kd120 that Ive tried.

@geoffcowan2384 2 года назад

What about if you just put another layer of the tint wrap on them? Nice video by the way. I enjoyed it.

@TheeDrumWorkshop 2 года назад

Thanks! Yeah, that's something that only occurred to me after finishing the video 😂 I had a look at it and it seems like it might bring the colour closer but lose more of the sparkle, but I'll try it out properly on one of them at some point! 💪

@geoffcowan2384 2 года назад

@@TheeDrumWorkshop true. Honestly they look good enough to do an indoor gig right now. In the dark with the lights I don’t you could really tell unless you were looking for a difference. Outdoors might be a little more obvious. Seriously, nice video. The drums look and sound great.

@BobSchoepenjr 2 года назад

Wow Luke what a work but with a very rewarding result! 💥Mark my word PEOPLE, soon Luke will start his own EDRUM brand. 👉🏼Any original name? 😁

@TheeDrumWorkshop 2 года назад

Thanks Bob! 🙏

@joemanderino6234 Год назад

what are you using for an amp?

@TheeDrumWorkshop Год назад

Details here! - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uK7PTwVfycI.html

@bobbyjones2112 2 года назад

You should just get a carpet from Lowes or Amazon that’s the right size. It seems like those drum carpets are just too thin! I would never use one because they’re so thin. Rock on!

@johndef5075 2 года назад

Thats what I did. Rug from Lowes nice and thick with a rubber backing. Works great!

@bobbyjones2112 2 года назад

@@johndef5075 I bought the garland brand with a Peace signs on it..lol

@Colognedrummerboy 2 года назад

Hi, which trigger you use in your snaredrum?

@TheeDrumWorkshop 2 года назад

It's the Roland digital snare, as I showed in the video. The side snare has a DRONE Halo trigger inside.

@matteovecchio5337 2 года назад

@@TheeDrumWorkshop hi, do you think it is possible to disassemble the roland pd140ds digital multi trigger and mount it on a normal acoustic snare drum? ... obviously by mounting a mesh head on it

@TheeDrumWorkshop 2 года назад

Hey! Yeah, it should be easy enough. Once you take the head off, there's just a little plastic stopper in there that needs removing to get the trigger basket out. Then you could place it in another shell (it just sits over the bearing edge). The only difference between the Roland shell and your own will be that I think the plastic stopper is meant to stop the trigger basket from spinning round, but I don't think it'd be a big deal at a guess!

@Brian-cm7iz 2 года назад

Where do you buy your drum wrap?

@TheeDrumWorkshop 2 года назад

I bought the wood grain wrap from eBay - got one from Amazon first that was a bad match, ended up searching around for a "cherry wood" vinyl wrap for the colour. The silver wrap was from a local shop but it's pretty much everywhere online and the tint wrap from eBay (though it's also available on Amazon and many other sites, the brand was Oracal and it's the mid-grey tint).

@Brian-cm7iz 2 года назад

@@TheeDrumWorkshop Always great content and look forward to all your reviews and videos . Thank you !