If One machine Fails the Job Try Another One: Modifying a Transmission Yoke To fit Another Use

Подписаться 31 тыс.

Просмотров 7 тыс.

50% 1

In this video I started out using the Monarch to do the job but that didn't pan out so I took the next easiest route and used the Thompson Surface Grinder. Surface Grinders are not generally thought of for removing much metal but they sure can and I don't even have an aggressive stone on mine. This video contains real time of taking 3/8" of material off this yoke. It was way quicker than trying to come up with a better setup to hold it and I was not going to hard after it because i had to use transfer washers to get the part to mag well anyway. I hope you enjoyed the spark show and thanks for Watching!

Авто/Мото

Опубликовано:

27 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@1crazypj 6 месяцев назад

That's the first time I've ever seen a surface grinder used like a face mill ! 🤯

@erickieffer8440 6 месяцев назад

I’ll admit I was a little surprised when it came out of the lathe chuck, but this action on the grinder was just awesome! Thank you Brian.

@stevejohnson8435 6 месяцев назад

Thought your wheel was gona blow brother!

@jdmccorful 6 месяцев назад

Just wondering about how much work it will be to redress the grinding wheel . It did a really nice job on the work piece from what I could see.

@TomChame 6 месяцев назад

Very neat.... That's some serious swiping on the S grinder. Thanks

@kevinhornbuckle 6 месяцев назад

We still miss Bailey, as I'm sure you do, too.

@paulcooper9135 6 месяцев назад

Wow! That's a serious cut on the grinder! Thanks for sharing 🇨🇦

@melshea2276 6 месяцев назад

Happy Sunday Brian!⚙️🛠👍👍👍👍✌️

@philgarbarini9645 6 месяцев назад

Hi from Bedford Va. Thanks for Sharing.

@edsmachine93 6 месяцев назад

Nice job Brian. That Thomson grinder is Heavy Duty for sure..👍 Have a great day.

@joshwalker5605 6 месяцев назад

i feel like i'd have gone to the belt sander for the first 80% of this but idk shit about this stuff so im enjoyin the sparks :-)

@ypaulbrown 6 месяцев назад

Hey Brian in the Olde Shop....always great visiting with you, Paul in Orlando

@jimsvideos7201 6 месяцев назад

That's one way to heat the shop!

@sharkrivermachine 6 месяцев назад

Nice job. Thanks for sharing.

@donmadere4237 6 месяцев назад

Can’t argue with success!!

@acmemachining 6 месяцев назад

Great job Brian. You got er done!

@elroyelblander6277 6 месяцев назад

👍👍got it done man... looks good.. have a good week 👊

@TrPrecisionMachining 6 месяцев назад

good job brian

@AmateurRedneckWorkshop 6 месяцев назад

Well done. Thanks for the video keep on keeping on.

@donkinzer5718 6 месяцев назад

I was thinking you could have chopped off most of what you needed to remove using a cutoff wheel and then finished it up on the surface grinder.

@landroverihtractor1965 6 месяцев назад

Another good job well done!

@CUTTERUPROB 6 месяцев назад

that's something i want when i move to the next shop, i miss having a surface grinder

@bulletproofpepper2 6 месяцев назад

Thanks for sharing

@Neo7CNC 6 месяцев назад

Hey Brian. Making the grinder work!

@hilltopmachineworks2131 6 месяцев назад

Gotter done! 👍

@Hoaxer51 6 месяцев назад

There’s an old saying, something about skinning cats, I think that might apply here. Keep this up and we’ll start calling you Sparky. Good to see another video from you Brian, stay warm and we’ll see you soon.

@KendrickMachineShop 6 месяцев назад

Man I need a bigger surface grinder, my little manual 6x12 just doesn't cut it for anything! Nice video, Brian, keep up the good work!

@ohhpaul7364 6 месяцев назад

Nice to see you, Brian. Sparks! Didn't you have a barn blow over last year? Figure out what you are going to do with that, I was hoping you might come up with another this old barn shop series but I am still happy with the first one. Thanks for the videos.

@bcbloc02 6 месяцев назад

I have reclaimed some of the barn material but way more left to do

@PeterLee-zn3jl 6 месяцев назад

Grind it...OF COURSE...

@BundyBearsShed 5 месяцев назад

More than one way to get er done eh

@lewiemcneely9143 6 месяцев назад

Some time being cooth just won't get with it. BLESSINGS to yall!

@JohnChrysostom101 4 месяца назад

Wild man lol

@MegaRiffraff 6 месяцев назад

👍🏻

@frednewman2162 6 месяцев назад

Wonder why you didn't put it on a mill and take down with a cutter that way?

@bcbloc02 6 месяцев назад

Lots of carbide inserts to beat up cutting hardened materials with a face mill. Grinders are better suited to the hard stuff I think.

@EngineersWorkshop 6 месяцев назад

Spitting that yoke out of the chuck jaws could have gone SO much worse... did you play the lottery later that day? ; )

@drawbar217 6 месяцев назад

I see 7210 on the rusty one, we replaced ours and the new one was not much tighter. Is your new one to provide more contact on the shaft? I highly suggest a grease fitting install and use spline grease at least once a year, nice feature on a tractor to seperate the rear but high wear area.

@bcbloc02 6 месяцев назад

Yeah the rust dust really eats up the splines. Using this other yoke Addams another 3/8” of spline contact and it’s mostly on an unworn area so hopefully it will go another 9000hrs without having to pull the power quad to replace the shaft.

@TheJohndeere466 6 месяцев назад

I had some 8.1 heads flowed on saturday. The one we were running has 2.2 valves and it flowed about 385 on the intake. The other one I put in a divider in the intake port and installed a 2.100 valve. Other than that the port was stock and it flowed over 400. The flow bench operator thinks something is wrong with the bench. Have you ever had one flowed? I didnt think they would flow this much.

@bcbloc02 6 месяцев назад

Yeah the stock valve with good porting normally I see about 360cfm @.750” lift. 400 on a stock port sounds way high as pretty sure when I had a stock 7.6 done way back it was like 250 cfm at about .600

@JustinAlexanderBell 6 месяцев назад

.050" a pass is scary looking.

@nashguy207 6 месяцев назад

Those were some heavy cuts on the surface grinder. I'M curious why no coolant?

@bcbloc02 6 месяцев назад

Cuz the coolant is only not frozen because there is a tank heater on it. I didn’t want ice cycles hanging off the grinder when I was done as it was about 0f in the shop that day.

@nashguy207 6 месяцев назад

@@bcbloc02 Understand we had that same here!

@SuperBowser87 6 месяцев назад

How about a hand file?? 😂

@ypaulbrown 6 месяцев назад

@earleclemans4836 6 месяцев назад

7K trans input?

@bcbloc02 6 месяцев назад

Yep

@scottjones7279 6 месяцев назад

Did he say that the Monarch was a 40hp?

@bcbloc02 6 месяцев назад

The Big Monarch with the 4 jaw is 40hp.

@rldoyle5705 6 месяцев назад

Are you still heating your shop with a 30,000 BTU water heater?

@bcbloc02 6 месяцев назад

The other shop still has the 4500w water heater. The grinder is still in the garage shop.

@Hey_Its_That_Guy 6 месяцев назад

@@bcbloc02 Hi Brian. How is your in floor heating working out for you in the barn shop? Is the hot water heater able to keep up with no issues?

@bearsrodshop7067 6 месяцев назад

Just what I needed, Sparks to warn by by 🙂Darn chemo,,,, I don't ever think my blood will thicken up enough to get warm (@@)! What's the yoke belong to Brian? Looks like the one's that were on my LN 9000 Ford dump truck. Bought me a go cart on stereos yesterday,,,, they call it a Honda Fit , but fun as H___L to drive with 5 sp manual, and room to enough to pass Motel 6 on trips,,Ha! Bear