Ignition Key Transponders 

Nice video. .... I am an RF Engineer, and the way you explain the basic function of the system is simplified so the layman can understand. ...... Nice Job.

Thank you, I appreciate that. It's been my pint after many years of writing and editing to do just that, simplify automotive technology for everyone.

Thanks for all the videos Guys! Dont know how people would dislike this! FREE knowledge! Keep it up!!!

Wow, what you're doing is in the top 1% of what any technician will do. I commend you for that. Keep us posted here. Thanks for posting...Mandy...

Great news... Yes, most manufacturers need a min. of two keys programmed into the system. Good for you...

*2021 we learned from 11years ago, awesome!*

Informative video. Thanks ! 🤔🤗

You know when you just randomly start wondering how something works? Thank you Computer Man lol

Thanks Mark...

Thank you so much! I just fixed my Nissan Frontier work trucks ignition and it wouldn’t start.. found your video.. separated the old key and put the transponder on the ignition and the new keys work 🙏

Couldn't you just bypass the antitheft module? Wire power directly to the starter and ignition?

very educational, thank you

Thank you, all we ask is that folks post and participate. Thanks again.

I know, but depending on your car's brand, some are not as bad. I don't really like when you have to use their scan tool to program a new key. Thanks for posting.

Did the engine start? That's good for you. have never had a viewer with a post like yours. The 2006 and older statement makes sense. Most systems have the AT module separate or it's a lot more complex system. Thanks for posting.

زبردست انفارمیشن ٹیکنالوجی ہے

Very informative ;)

Very informative,thank you.

@lalistadeaura Thank you so much. All we ask is that you post and participate. We encourage you to visit our latest BMW Euro video series right here on this channel. It's FREE. Thanks again...

Thanks that's amazing great video channel I like it Nice I dea I respect

On older GM systems with the resistor pellet yes. See our video. On newer systems there's a low tech way to disable the transponder key system, but NOT REALLY. What you do is remove the coil ring around the ignition cylinder, take the transponder key and take the two together. Hide to whole thing under the steering column. Then use a regular key to always start the engine. This system will NOT work on some new models, since the computer does a rational check & knows the tampered system.

ดีครับokได้ความรู้ดี

Good info ;P

This is awesome to watch when you’re high

Am I mistaken or are you making the coil around the tumbler and the coil around the key with the same circuit? I don't understand how a simple wire can imitate a powered coil and transponder. The coil is powered on, and the key responds with some stored code. I understand that you're replacing these encrypted signals with simple voltages that are then passed through the relay to the ECM. I just can't understand how the same loop can be used as both the "transponder" (key) and the induction coil. I feel like I must have missed something in the wiring to the relay, but I can't figure it out.

How are things going with buying new key box ? I have the 99 audi but i wanna buy the facelift key box which has 3 buttons for lock,unlock and trunk(which i wont be working ofcourse) ? Can i just place that chip inside the box with the key or how's the wiring going inside ?

It's not about insecurity, it's about money... These videos are FREE for all and we need to keep then cost effective for us to make.

@chasingerrors1 Well, SH is my here, so I'm honored. I also like the fact that you're participating. We're also a full time automotive repair consulting service, free here on this YT channel. We hope your car never breaks down, but if you ever needs us we're here. Ask away. All we ask is that you participate. Good luck.

Hello there ADP I have a 2003 VW Bettle and I have not been able to start it? I re did the whole engine a overhaul I was only able to get it of the shop to home and that was it? Any suggestions how to get it back to normal?

Very Educational

Question would be how can I magnetically read and or ohms resistance on the transponder. 2010 Ford Focas. Stupid my key is all I have. Not the administrator key

Wow...I really like listening to the robot voice narration and pronunciation of "trans - pondder" or "mod - joool". What country are we in?

So if I understand it right, I need the key, ignition switch, and the decoding module to install one in an older vehicle that does not have one. I got the ignition switch, keys from a salvage yard and will go back to get module under the steering column with the wiring harness as well.

1999 Ford Securilock Pat w/bad cylinder. Two transponder keys. Does a cylinder need to be installed to use the induction coil bypass methods. As in affixing key to ring and actuating via standard key, heat shrinking transponder to dummy. Simply mating transponder key [plastic intact] to blank was no go. What would you suggest, new cylinder and code to old keys? We disagree on when a scan tool is requisite. We abla Ohm's Law and are confused by 'coding/recoding cylinders' Thanks.

GM uses a rolling encrypted code too. Can not copy the key, need to buy an expensive replacement, and program th ecar to it.

I got all the parts now. I looked up how the donor car worked. Seems all I needed was the ignition housing, switch, transponder under the steering column and the harness off the original vehicle. The ECM was not part of system. I will install it and let you know how it went.

No, you don't understand. The ECM and/or the key transponder module talk to each other. Often, the TM is also the ECM. This is a fully integrated system. To adapt this to old car requires also changing ECM or reflashing it, plus adding extra components. Thanks for posting.

Information about dodgemagnum sxt 2005 6cy

@nestorweld Thank you so much for posting. We thrive to be as informative and entertaining like no other automotive channel on YT. We also want this channel FREE for all. On top of that we're a full auto repair help service. We encourage you to visit our latest BMW Euro videos with advanced nice narrations. Keep visiting us and good luck.

The thief one thank you for advice

I't made my day when I found out my 07 FJ has no key transponder! I ordered 2 2008 keys with all the electronics inside for 50 bucks and just to get them cut and I programed the remotes, all done. The dealer wanted $350 per key because they insisted the 07 FJ has a key transponder.

It doesn't work like you think. The key cylinder induces and powers the key-transponder, which is inside the key. The cylinder magnetic flux-waves have only a specific range to power the key-transponder. You'll have to tape the old transponder to the blade key. I've seen heat shrinking tape being used. Good luck and hope that helped.

Hey how can I take out the ignition key transponder because I want to put a ignition bottom star but I don't know how can I take out the sensor key ,,, can you help me with that ..?

It started after I programmed the new cut key. Which tells me its working, cause the new key would not start it till I used the two original keys to program it.

Do you have an issue with gays? We don't... We make these videos for the benefit of everyone and our videos are FREE for all. To that extent we continue to make our videos better all the time, as seen on our sew series "GDI Gasoline Direct Injection" and "Automotive Relays Explained" right on this channel. Thanks for posting.

You need a key that is cut to the ignition cylinder that you have. Then, using the equiment you reprogram the new key or whichever key you have to the Passkey computer. Having done this many times, I can tell you that the key-computer circuitry could be in the ECM, Dash-Module or Body-Module. There's a book that is also needed for this operation. Even if you have the Scanner you need this book. Locksmith people that do this kind of work should have all they need. This is something you can not do

Need help. My chip key was in my lap when i got up and flew in fire we had going outside. I have a 2001 ford expedition. Need to bypass. Anybody know a way. I have other key that turns it over but no chip no start???

Well it went in just fine. Seems only vehicles 2006 and older work, because they use 64 bit in newer cars. The older ones use 32 bit and dont tie in the ECU on fords. I did makr sure I got a 3rd key made cause you need 2 to program a cut blank.

These anti theft systems are more of a pain in the ass to the owner who loses their key.

You need an NGS Ford factory scanner to do this procedure. I'm sorry, but that's the only way. A locksmith company if they have the tool will be able to do this. Call someone else. Good luck.

a new generation of classical

Sir ham kisi bhi chavi vale se bana sakate he kya key

This video is a 2010 time capsule

2007 Jaguar keys suck, but they are really easy to program.

I lost my only key to my pt cruiser is there a way to bypass the chip that's in the only key that's lost what can i do to drive my car if i have no key

como le ago para quitar ese sistema de seguriad que no sirbe para nada. solo me esta dando muchos problemas....

These modern transponder keys and remotes are fantastic are okay - until you lose one. Then yiu're so screwed it's not funny, We have to ask ourselves, is all this modern "convenience" any better than pulling a kay out of your pocket, inserting and turning it? At least you can get those copied.

گٍيِفُ آعمٌلّ برمٌجُهً ريِمٌوند بيِجُو فُرنسيِ

hi sir i need tirning auto eiectricain

اتمنا أن اتعلم برمجة المفاتيح

Silicon chip in narrator head got switched to overload, and nobody's car will start today, he's gonna make them stay at home

Watch the diagnosti

Actually they aren't all the same, all use different protocols. The most secure are challenge/response transponders.

Is it rfid? Please reply

module! ,module! ,

Fiat Transponder keys are the worst. They uses rolling codes. They are the only ones that use programable RAM chips. Other car marks like VW, Ford etc use normal non-programable ROM chips. Apparently when you insert the fiat key in the ignition, it uses they code from the last time you used the car. If a key warning light appears during driving, the key is being re-programmed with a new code and is showing an error due to voltage inconsistencies or magnetic fields corrupting this new code transfer to the key. Weird huh? Corrupt transfers can occur meaning the next time you start the car the corrupt code is not recognised. Incase of this a code card is required and a mathematical procedure not for the fiat hearted is required. Emergency start up. You insert corrupt key in ignition. Press the gas pedal until engine warning light goes after 8 secs out then appears flashing. The number of flashes is counted and must correspond to the first code digit on card. Then For next digit, do same thing as before only engine light goes out after 4 secs and flashes again giving a different figure. Its really complex, I have a science degree and don't understand it. Why is it so complicated in car nobody would really want to steal?

Hi I own Mazda MX5 2004 convertible 1.8 petrol I replace a battery in my car after that it did start couple of time then once I left car key inside the key hole all the dash lights was ON, when I come back I saw "car with key" Dash sign is flashing since then car is not starting I have checked all fuse they all good but no matter how may time you turn the key car is not starting just a starter motor turns the engine wheel but not running I have checked spark plugs no sight of petrol there also checked Petrol pump there is also no 12V present it's look like immobilizer is cutting off the fuel system I don't have a remote key fob just a normal Mazda key can someone tell me the quick solution to start this car

key pasvad bolero

I don leed to talk to much guía me to cut thruth ignition switchblank key for 1986 Ford ranger truck right away please or let me go

France

0

Im high and just passin by.. Bye

HI THERE HAVE A ? I'M THINKING I HAVE A CENTRAL LOCKING SYSTEM ISSUE ON MY 1994 BMW 325I IT ALL STARTED WHEN I WAS MESSING WITH MY TRUNK LID WIRES TO THE LOCK CYLINDER AS WELL AS THE DRIVER SIDE DOOR LOCK, I HAD THE PANELS OFF OF BOTH OF THOSE THE DOOR AND THE TRUNK MESSING WITH THE WIRES AND SO ON... HAVE A NOW WHEN I TURN MY KEY TO START IT DOES NOTHING, DON'T EVEN DO A CLICK CLICK TO ENGAGE THE STARTER. THANK GOD I'M ABLE TO DRIVE BECAUSE IT IS A 5 SPEED MANUAL AND I CAN STILL PUSH START IT RUNS THAT WAY. I'M READING THIS BMW BOOK I HAVE AND IT KEEPS TALKING ABOUT THE CENTRAL LOCKING DEVICE, I'M JUST WONDERING WOULD THAT HAVE ANYTHING TO DO WITH THE CAR NOT EVEN TURNING OVER TO START? IT RAN FINE AS EVER UNTIL THAT DAY MESSING WITH THOSE TWO THINGS THE WIRING TO THE DOOR AND THE TRUNK GOT INTO IT TO START AND NOTHING AT ALL... I NEED HELP ANYONE KNOW ABOUT THIS? OR WHAT IT SOUNDS LIKE??? HELP WOULD BE OH-SO APPRECIATED!!! THANK YOU KYLE

When your cars key is worth more than a car worth stealing. This is what I think is theft by proxy of car manufacturers?

i lost my smart key

Just lost my key

Get rid of annoying robovox!

hello help

Stephen Hawking works for you guys?

if the voice is normal no more dislikes of this video....i dislike too because of that transform voice

Bollocks

Damn I hate that generated "voice". Makes the video unwatchable. It would be nice to add subtitle so we can turn off that horrible noise.

Information about dodgemagnum sxt 2005 6cy