Installing A T Mold From Laminate To Carpet (NO CARPET REDUCER)

Подписаться 23 тыс.

Просмотров 129 тыс.

50% 1

In this video, I go over installing a t mold from laminate to carpet. Sometimes the transitions we need are the wrong ones or they need to be special ordered. Well don't sweat it. We don't need a reducer. We can knock this out with a t mold. And the results are perfect.
Thank you to the supporters and subscribers of this channel.
Tools You May Need:
Pry Bar
www.amazon.com/gp/product/B00...
Hammer
www.amazon.com/gp/product/B07...
Tape Measure
www.amazon.com/gp/product/B01...
Tin Snips
www.amazon.com/gp/product/B00...
White Putty
www.amazon.com/gp/product/B00...
Dark Walnut Putty
www.amazon.com/gp/product/B00...
CA Glue
www.amazon.com/gp/product/B01...
Brad nails
www.amazon.com/gp/product/B00...
Miter saw
www.amazon.com/gp/product/B00...
Floor Spacers
www.amazon.com/gp/product/B07...
Dewalt Oscillating Tool www.amazon.com/gp/product/B07...
Floor Mallet www.amazon.com/gp/product/B00...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission (at no extra cost to you of course). This helps support the channel and allows me to continue to make videos like this. Thank you for your support!

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@scramman 16 дней назад

This is the greatest video i've seen so far. Great job man.

@VaughanHandyman 2 года назад

Straight forward and I love the tip about not having a kicker. Thank you!

@YOUFLOOR 2 года назад

Ha thanks broth

@cuthit1 Месяц назад

Perfect , thank you sir.

@YOUFLOOR Месяц назад

No problem. Thanks for the comment

@true615american2 2 года назад

Glad to see another video, thanks for helping us out

@YOUFLOOR 2 года назад

You got it brotha. Thanks for the support

@Texan523 Год назад

Thank you, for taking the time to show and teaching you skill..

@YOUFLOOR Год назад

You got it Kelly. Thanks for the comment

@peterproehl2980 Год назад

Great video. You made my day a lot easier. Thank you

@YOUFLOOR Год назад

No problem, Peter. Thanks for the comment

@mrmario11 11 месяцев назад

Best video I've seen so far for this procedure. Well done!

@YOUFLOOR 11 месяцев назад

Thank you, sir. And thanks for the comment

@patman2193 2 месяца назад

that's a great video. thank you!

@paulolet4766 Год назад

Excellent video, thank you.

@YOUFLOOR Год назад

You got it paul. Thanks for the comment

@richardhannon1806 2 года назад

Thanks! I needed to see how that is done! You are correct. The guys at Home Depot are not installers. Their explanation on hoe to install are pretty lame compared to your channel. Thanks for taking the time to explain this transition installation!

@YOUFLOOR 2 года назад

@Richard Shannon Glad I could help! Thanks for the comment!

@ediscruz2253 Год назад

thanks for sharing your knowledge 🙂👍

@YOUFLOOR Год назад

You got it! Thanks for the comment 👊

@indyfosho5458 9 месяцев назад

Lookin like you need a new blade... lol. Nice work man, learned what i need to, thanks!

@josevivanco7735 5 дней назад

Thank you

@YOUFLOOR 4 дня назад

You’re welcome

@CorneliusSmalleliterealtor Год назад

Great video thanks

@YOUFLOOR Год назад

No problem

@bluered1322 Год назад

Couldn't make up my mind where to end the laminate flooring. Some people put the transition in front of where the door closes but this made up my mind on installing it under the door when its closed.

@thedudefromU 2 года назад

Would love a close-up of the channel and the T transition to see how it locks together. Thx for the video

@YOUFLOOR 2 года назад

Check this video out. It has several scenarios for installing transitions. You should be Ble to see it from the end, how they click in. Thanks for the question. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_oTUB9EM3a8.html

@John-gr4td 10 месяцев назад

Spitting image of Tim Blake Nelson!

@mgweir3252 Год назад

A tip I saw from another floor installer is to put a strip of felt over the tack strip to insure the nail points don't go too far through the carpet and into feet.

@YOUFLOOR Год назад

I think I saw that too

@Str8talker76 Год назад

Woke up to -4 temp -35 with the wind-chill ...bbbrrrrrrrr

@Str8talker76 Год назад

Good morning 🌅

@ALLworldCONSTRUCTIONLLC Год назад

Hey good job man

@YOUFLOOR Год назад

Thank you

@lonewolf4827 9 месяцев назад

Hi my friend, great video, got a question. Does the concrete for those screws you used on the U channel need to be predrilled? Thanks Also, +1 on trimming the padding back. I usually use a pair of scissors .

@YOUFLOOR 9 месяцев назад

I have not always had good luck drilling holes in concrete for transitions. My preferred method is to use pl3x to glue them down. Make sure not to put the glue right up against the flooring as expansion will cause bowing up of the floor. But glue is easier for me cause I can tweak the transition and use hot glue or weights to hold it down until pl3x dries. Hope that helps. Feel free to ask more questions if needed. Have a great day

@princemacon7523 2 года назад

I have carpet from my formal living room transitioning to ceramic tile in my hallway. Man the edge of this carpet in looking all frayed and tattered. I was wondering if i should try to add a transition piece that would cover the ragged edges of the carpet (my subfloor is concrete). I would appreciate your suggestion(s). hopefully my description was descript enough :) . if not ask me some questions so i can clarify. thanks

@YOUFLOOR 2 года назад

Yeah may need a transition if you can't stretch the carpet back up close. Get a matching reducer and glue it down with urethane glue. Put a piece of tack strip about a 1/4 inch in front of the transition. Kick the carpet over the tack strip and tuck it in the 1/4 inch gap. Check out this video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GIb6NQMx0pA.html go to 6:17 and just imagine the laminate is your tile. It will show the set up I just explained. Only you'll have to glue your transition as it's on concrete. Btw if you wanna continue to spread the love as you learn, I also have a video on how to install transitions on concrete ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-odK48bSCVZE.html. Thanks for the question

@johngaspar4425 Год назад

Love your work. I'm going to have to disagree with where you placed the T-Molding. I would've bridged it across the door stop molding, it will look part of the door stop and central that way and you still get the same desired effect you state. 3:33

@YOUFLOOR Год назад

I m sure it looks good as well We all have our own little signitur we leave on our work. Thanks for sharing. Nice tip!

@OS-tz3fk Месяц назад

Why did you cut the part where you pin the carpet at the end...now, I can't use the video.

@christopherbrown8342 Год назад

This mean seem like a stupid question but what do you cut the u channel with? I did a test cut with a pair of aviation snips seem to work okay but seeing if you’re using a port a band

@YOUFLOOR Год назад

Yeah I use a regular pair if tin snips. I just cut the thick part on both sides then just bend back and forth til it breaks. Hope that helps. Thanks for the question

@mrnobody2873 Год назад

I have just about every weird complication on the door I'm doing. The carpet is really dense and I can't get the razor to penetrate to the backing plus the edge being cut was a previous seam to a different carpet so I also have a thick mess of glue to cut through. The adhesive for the transition was too big for my gun and the door sits on a 135 degree offset to the room resulting in planks that can't be lifted up for corrections after they lock in to place.

@YOUFLOOR Год назад

My goodness. It sounds like a lot of head scratching going on.

@aanonymous7442 Год назад

will this method work with Lifeproof Vinyl Plank flooring? I currently have carpet attached to the metal hammered strip but assume it will need to be replaced.

@YOUFLOOR Год назад

It should work. Make sure the transition is lipped up and supported by the tack strip underneath. It you just try to set it on the carpet it will be to flexable.

@pmexplore 2 года назад

Any videos on how to install the molding by the front or back door?

@YOUFLOOR 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jAt0wefIgyw.html go to 9:45 in this video. It may be a help. And thanks for the a good video idea. I have a lot of transition videos but not any for the front or back door.

@leslieadams1965 Год назад

I have a tile to carpet. I want to Kay pergo wood over the tile. Could I cut out an 1/8 of an inch of the tile where it meets the carpet to lay the u channel?

@YOUFLOOR Год назад

Just taking a look at Comments. Realized we didn't get to this one. Did you get your problem solved? If not send us a couple pics to youfloor.net@gmail.com. maybe we can still help.

@lasalsera-x8d 8 месяцев назад

I think my builder forgot to put the transition moldings between carpet and tiles. Is it normal to have it?

@YOUFLOOR 8 месяцев назад

Not necessarily. If a floor guy can tuck and roll it it looks nice too

@Salute_vet22 9 месяцев назад

hi, maybe i missed something. I'm going from laminate to carpet, I have the 5 in 1 molding. Should i use the t mold or reducer? Also, if my laminate and tile are the same height can i use the t mold? Thanks

@YOUFLOOR 9 месяцев назад

This method is for when you don't have a reduce or you just prefer a ṭmold. Here's a video going from carpet to laminate using a reducer. Hope it helps. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GIb6NQMx0pA.html

@YOUFLOOR 9 месяцев назад

And yes, you can use a t mold between laminate and tile if they are the same height

@albywinters Год назад

Thanks, transitions with a U channel are a pain in the fucking ass

@YOUFLOOR Год назад

I agree! There's gotta be a better way.💪

@davidrabago7129 Год назад

How do you do this on concrete?

@YOUFLOOR Год назад

You will have to glue your transition or use concrete anchors. Make sure to leave an expansion gap. Thanks for the question

@Aepek Год назад

6:39 is this just 100% silicone that’s being used, or what??

@YOUFLOOR Год назад

Yes it is

@jayc6395 Год назад

Thank u

@YOUFLOOR Год назад

You're welcome. Thanks for the comment

@mayac2266 Год назад

My carpet is higher than the laminate flooring. What can I do in order to install T molding properly? Thank you

@YOUFLOOR Год назад

In this case I would recommend using a carpet or multipurpose reducer. Thanks for the question

@mayac2266 Год назад

@@YOUFLOOR do you think I can use a narrow scrap pieces glue on to the edge of the planks to add height so the T molding can attach on to it?

@YOUFLOOR Год назад

You wouldn't want to glue something I ng to you flooring as it can prevent it from expanding and contracting. Jusput a piece of tack strip under the carpet. Then lay the t mold on it and see if it feels sturdy or flexible. To much flex will make it break. Hope that helps