Installing Jeep Cherokee XJ 3 inch Suspension Lift Kit by Rough Country

Подписаться 124 тыс.

Просмотров 139 тыс.

50% 1

Give your XJ a nice boost and an aggressive, new appearance with Rough Country’s 3in Suspension Lift! This all-inclusive lift kit comes with everything you need to lift and level your Jeep with an easy bolt-on installation process that can be done in a home garage with common tools!
This 3-inch lift kit lifts and levels the vehicle, eliminating the nose-down look and allowing for enough ride height to clear 31in tires! Each kit also includes Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers a long lifespan of impressive vibration dampening. Each kit also includes a set of lifted coil springs and your choice of add-a-leafs or full replacement lifted springs in the rear!
Rough Country’s 3in XJ Lift Kit features a 100% bolt-on installation process that can be performed in no-time flat! Includes a Lifetime Replacement Guarantee.
Visit roughcountry.com or an authorized Rough Country dealer to learn more.
Get yours at www.roughcountry.com/jeep-sus...

Авто/Мото

Опубликовано:

10 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@VenomTT 4 года назад

I just installed this with the full leaf springs and my rear brake line from the body to the axle is almost taught when on the ground and stretched nearly to its braking point when jacked up. I recommend getting an extended brake line. This should be included with the kit.

@aidanmakinster922 4 года назад

Thank you. Good to know.

@BradleyWoodruff-gx3mm 9 месяцев назад

Yeah I just did mine, and I was thinking the exact same thing

@4x4adventure_pl 11 месяцев назад

The way the Cherokee XJ conquers those trails is nothing short of inspiring. Long live the offroad king!

@danhambrick6331 5 лет назад

It would only go that smooth in a perfect world....lol....

@em6132 5 лет назад

Here in Canada: "Remove sway bar links. Snap bolt. Swear. Go to junkyard to find replacement bolts and get other back up pieces that will snap. Move to rear. Break shock bolts. Swear. Get inside rear panels to remove top bung holding remaining broken bolt pieces. Replace all other rusted pieces that broke while removing."

@williamsba1202 4 года назад

I love that feeling when I immediately finish watching a RU-vid video and I feel so confident that whatever I'm about to do will be such a breeze!! Then 8 hours, $250 in unexpected costs, 3 thrown tools, at least a handful of misplaced removed hardware, and a newly developed migraine later, I end up having to call in one of my expert mechanic friends to help.....and all I get to do is hold the flashlight.

@PuReMoves23 3 года назад

@@williamsba1202 dude that's hilarious I feel that so hard

@809FILMS 3 года назад

Went damn well smooth for me with a 99 that was on the coast of Maine for its entire life even with the rust build up 3-4 hours max it was done

@magen_alexis 2 года назад

This only comes from building many jeeps myself you can tell in this video the actual inexperience of rough country due to putting the torx on the outside of the sway bar mount because it does nothing it’s pressed in the nut just comes off keep it up guys you’ll get it one day

@dreamsaidtheangel2910 4 года назад

Do I need bump stops for this kit? Running 31 tires. And should I get a stabilizer too? And extended brake lines? And anything else that would be recommended?

@darinjenkins7954 5 лет назад

Just bought one, that's the rules after installing what should be done to ensure safety?

@Killian665 4 года назад

What kit is this that comes with whole spring packs? All the ones I see are add a leafs you do yourself

@cesarmagallon 4 года назад

Does it come with shims to adjust the pinion angle?

@Call_me_JJ66 Год назад

Do you have to have the peice you drilled a hole in? My bar won't line up after installing the front, my kit didn't have the peice you drilled out. Thanks

@MrMountaincycle Год назад

did you install wheel spacers on this build? if so, what size 1.5" ?

@rnthiphop 2 года назад

Beautiful red, anyone knows what paint code is that?

@robertsmith7955 3 года назад

Does the 3 inch lift come with new leafs with the $300 kit?

@yryama 5 лет назад

I was thinking of adding 3" lift with longer springs in front and adding a leaf in the back. Would I need extra long parts?

@RoughCountryTV 5 лет назад

www.roughcountry.com/jeep-suspension-lift-kit-670xc.html This is the recommended kit you would need to achieve the 3' lift

@planeofexistence7602 10 месяцев назад

What tire size is that?

@robhenry6737 4 года назад

I am about to install this kit on my 2000 Cherokee. Do I need to get a front end alignment afterwards? Thanks

@RoughCountryTV 4 года назад

Alignment is required after installation.

@thomasmccain2186 5 лет назад

I wish my install went that smoothly! And for some reason I still fear creaking in the rear..

@RoughCountryTV 5 лет назад

Was everything properly torqued and no worn out bushings?

@thomasmccain2186 5 лет назад

@@RoughCountryTV only worn bushing was the shackle which I'll be replacing with a adjustable one soon

@Mob_killer 4 года назад

I have this lift and one of the bolts on my rear shocks came loose and broke because of previous owners but do I need to order special shocks for it or can I order regular ones from an auto parts store?

@RoughCountryTV 4 года назад

You would need to get shocks that are designed for 3" of lift to make sure the shock has enough travel.

@0shitzgivens45 2 года назад

No mention of brake lines having to be longer

@JustMrRodgers 4 года назад

No spring compressor necessary? springs not going to launch out into my garage wall when i unbolt them? lol

@RoughCountryTV 4 года назад

No you just simply lower the axle then install the spring then seat them properly into the coil bucket.

@maxwellkripak 3 года назад

I am trying to install this kit right now, just the way you showed but the front axle is twisting. The passenger is twisting towards the rear of the vehicle and the driver's side is shifting forwards towards the front. I got the passenger control arm in but the driver's side isn't. Why is this happening?

@SirSeksAlot 3 года назад

If you’re doing the lift yourself, use a ratchet strap to help move the axle into the right position.

@maxwellkripak 3 года назад

@@SirSeksAlot thank you! It worked. Took a lot of massaging, but I got it in.

@rs-chongracing 2 года назад

Hello, I am interested in buying that suspension but I would like to know the dimensions of the boxes or the box if it is only one to see if it enters through the door of my mailbox and not have problems with dimensions, can you help me with that detail

@nickdaugherty5526 Год назад

I just ordered it and it comes in several boxes, five or 6, and the leaf springs ship unwrapped, just the leafs springs themselves no packaging, they're pretty good size boxes I can't imagine them fitting in a mailbox

@MichaelB277 6 лет назад

Can you tell me the exact size of those tires in the video? I know you mentioned 31's, but I assume it's some variant of the 200-300/75/r16 sizing nomenclature

@BetterDegree7 6 лет назад

MichaelB277 265/75/16s

@kimballmcdowell1554 5 лет назад

The wheels on that XJ are 15x7s. They installed 31x10.50r15s on them.

@nickroberts5174 3 года назад

@@BetterDegree7 did u mean “r15”

@chrisdavies3686 3 года назад

Do I need a lift or can I do this with the vehicle on jackstands?

@fiddle24v 3 года назад

Don’t know if you already got the kit, but you *can* do it on jackstands but it’s way easier to do it on a lift

@zemplays5287 5 лет назад

Will this lift kit pass mass inspection?

@RoughCountryTV 5 лет назад

Yes this particular kit will pass inspection as will most all of our kits depending on the state you live in and the lift laws for your state.

@evanbrown3034 4 года назад

Do I need to extend my brake lines

@RoughCountryTV 4 года назад

Not on this kit you do not. No.

@frankmick8683 4 года назад

ODD.... Mine sits 3/4'' lower in the front then the rear even with a full tank.

@RoughCountryTV 4 года назад

21.25" on the front and 20.25" on the rear is what you should be sitting at from center of the wheel at the center cap to the fender.

@ashleyperezperez8377 4 года назад

How much you think is the cost $$ for all of this 3”

@RoughCountryTV 4 года назад

$669.95 for the kit and labor rates will vary depending on which shop you use. You would just have call shops in your area for labor cost. www.roughcountry.com/jeep-suspension-lift-kit-670xc.html?find=1999-jeep-cherokee-xj-4wd-375933

@atombom8214 4 года назад

@@RoughCountryTV what size wheel/tire are on the model vehicle in this vid?

@Tangerrr 4 года назад

@@atombom8214 those are stock xj wheels(15x7) and 31x10.50r15

@YTlovesme 5 лет назад

Do you need to use wheel spacers if you keep the stock wheels?

@RoughCountryTV 5 лет назад

No wheel spacers needed for the install of this kit to run stock wheels

@mikenike19 5 лет назад

@@RoughCountryTV what tire setup do you have in this video?

@nickfoles4292 5 лет назад

@@RoughCountryTV can you run wheel spacers anyways?

@jessepstevens9395 4 года назад

I had problems with the head of the bolts for the swaybar drop brackets rubbing on my tires when running factory wheels.

@aidanmakinster922 3 года назад

What size tires are you running?

@RoughCountryTV 3 года назад

Recommended Tire Size 31x10.50 Recommended Wheel Backspacing 3.75"

@aidanmakinster922 3 года назад

@@RoughCountryTV ok thank you. I'm hoping to get a xj as a first car and can't decide on what size lift and tires I want. I'm kinda leaning 33s and a 4.5" but the Jeep has the dreaded dana 30 so that's the limiting factor rn Should I buy it.