Just another Typical Monday!! 

She's labouring with you and asking what you want for your dinner? Seriously mate you need to put a ring on mate, that girls special

Don’t know how I found you but this is oddly entertaining

I love the way Amy takes pride in keep the work place clean tidy....

the young gordon ramsey of bricks

You are not kidding about Amy keeping the site clean.....that scaffold was immaculate. Fair play.👏

I hate being told to do it but ive heard many horror stories and seen the scars of layers fingers slipping and bricks dropping and hitting the labours in the head, shoulder, back etc and with cold gloves it tends to happen more. I think she should be wearing a hard hat while underneath you. there is a fair gap between the planks and the wall. cheers from a Windsor, Ont layer. thanks for the vids.

Been a bricklayer 40 years and you Charlie are better than most I've worked with 👍

03:22am and I’m laying on the sofa somehow here but I find it’s somehow very entertaining watching you lay blocks 😂

Great to see how you made the best of less than ideal conditions. Amy is a trooper! you might want to give Rodian a bit of a shout out. He was the guy who pointed out how good you were at pick and dip some time ago and sent a bunch of us your way - and I am mighty pleased he did. . He has just discovered that his Mrs has a spinal tumour and they are have a pretty rough time of it. Sending a few folk his way would help him out, as YouTubing is his only source of income. He has to care for his wife in between chemo treatments, which rules out working for the man. Cheers Charlie.

Good tip about tying the block bands up! Taught my apprentice that from day one, I've nearly tripped over them before when they've been half buried by machines tidying ground up

It started with a kiss , hot chocolate, banging tune 😂

Glad you came on my recommendations! Loving this POV action

Nice to see Amy cleaning the boards, there heavy enough without the cement. Good on ya girl 👍😁

I wonder how many non-bricklayers watch your channel? I'm an aerospace project manager 😜👍

Back to front blade classic 👌

Haven't seen your videos in a while. I must say you've improved a lot. Not to say that you were even close to bad before. You just seem way more smooth now. Nice work cobber

Your grafting these videos out lad 👍🏼

i was just going to tell you about the blade ha ha ha good one

I love how most people would have edited out the video having the blade the wrong way around 🤣 shows there is no bull with this channel

I love this job so calming

Both brilliant!what an amazing team, 😊

You got a good eye Charlie!👍

Love the fact your bird always after a scran ha

Well done Amy. #thedreamteam

Love the way you use your tape to take measurements.

Hi Charlie, good video as always , theres nothing worst than going to site wanting to start work and nothing ready , people doing monday clubs and then there moaning on a friday that they only got 4 days pay , am a bricklayer on isle of man didn't realise how much I miss it especially with lockdown here with building work and sites shut down dure to are second lockdown, keep up the good work 👍

To be fair that is some decent muck 👍 perfect 👌

This in a weird way is very inspirational. I say weird because I'm a film video editor but its encouraging to get on with work.

Love the economy of movement/effort, turning a block off the stack with the trowel, making it easier to pick up.

I had my own business,and my woman was20 also. With a baby girl as well.GOOD MEMORIES

Craft and graft and the pain and pleasure of it. It's healthy and you sleep good. Out in the air, in a little work environment of your own..................used to love it man. Remember too Charlie............a proper service to Community and Families who need these houses. It's a great job mate!

CHARLIE. ,YOU,V BEEN. WATCHING. ROB. SONGER. One of the BEST. GOD BLESS YA. JIM

Can't get my head around having your Mrs on the hod lol

Cool boss , cheers from a concrete layer in New Zealand 🇳🇿

Hi Charlie good video as always just wondering Is it the same everywhere up in the Scottish Highlands we do a lot of kit house and nhbc make us put wall ties in at 225 so every course of blockwork

Nice videos...we need more go pro action

Worth her weight in gold, very positive too,

That insulation knife looks the bollocks, gonna have to get myself one of them

Amy you put most of the lads I know to shame. In a work sense. More power to you darling. Big up team Collison.x

Puts on the belt: *Bob the builder theme song starts playing*

I pissed ma self at the backwards blade ! We can all do things like that 😂🤦🏻‍♂️

i want a jacket like that, only half decent ones i can find are scruffs! great videos keep em coming mate your the bollocks

After Amy’s done her cscs card test, straight onto the forklifting day course, money in the bank, boom

Looks like he's has electricity running through him at 15:00 mins in 😁

That Woman is some Grafter, Clone that girl, Worth in Gold ⭐⭐⭐⭐⭐

Amy smashed it top hoddy

1st , lost my tools ? ..........🤯🤣🤣. 2nd if we leave a mess or dirty brickwork we get charged or docked ! If the silo breaks or no driver tough shit ! You nearly took Amy out twice there today Charlie 😳 and I loved the backwards blade . You guys could easy afford a nice early one after all those super chats last night 😉💷 ker ching 👌🏼🧱👍🏼

God bless you

Good video. Slow go with the BBC level but that’s the way it goes

You heard it here first, lads. Started on a Bellway job in London this morning and they're pushing for everyone on site to wear a mask throughout the whole shift.

Labour is really annoying but it ok when u get to try a bit of bricklaying

what level are you using? what brand i mean. nice vid

I trust you are wearing your ear defenders... What?? Exactly!

Hey Charlie, what blade do you use to cut them celcons blocks?

Got what you say about not being in the stone age's but in the early 80s on site was not let down by silos and fork lift drivers 1 ladder up and 1 ladder for down yes composated with the extra hods but can't beat the good old mixer always a gadge in it . From 7- 4-30

Hey there Mate, Do you have to build the scaffolding or does the contractor get another person for that?

Your Amy is one in a million

muck looks like it could go back in the mixer for 5 minutes

Driver will say " no gifts no lifts "

For the gable end drop, fit the course then when set snap a line and use a reciprocating saw.

Does the blade cut all different types of breeze block ??

That’s definitely a great idea mate get your tickets for the forky would get you out of sticky situations

Forky didn't come in or was late? The site agent would've got a different one in

This guy is such a slacker

Don’t wry Charlie putting the blade on worng happens to the best of us Monday’s 👍

I think all the people in college can agree you learn more from these videos than you do at college, and that's not me trying to be a ass lick😂

you aren't only talking to brick layers charlie boy, I watch you and im in cyber security haha

you need to get a flexvolt battery for that saw.

Can you cut the blocks on one side with the saw and snap them for the rest? Obviously you have your own way of working but that’s what I do haha

What blade are you using in your skil saw?

so I'm not a tradesman never done it before does it not matter if the insulation gets wet? like from rain or stuff?

Has that mixer got a sports exhaust?

There's some nasty shit that goes in those blocks mate would wear a mask if your guna cut the like that all day. Hammer bolster for me

She must make some noise in the sack if 30 mins in is anything to go by 🧐😂

Forklifts always have a flat first thing Mondays and after 12 on a Friday. Think there's something fishy going on here. 🤔. Does anyone else have this ?

Not convinced about the skilsaw the celcon dust will do in the motor after a while. Can get battery grinders which are good👍

That's like British accent ASMR or something.

I did my npors telehandler it was worth it mate

Most be hard make money on that private job . There changing there minds a lot .

Site we are on we are the only gang of 3-1 and me and are hoddy both have tickets for forklift so we just use it when we need it a lot easier than going looking for forklift driver to get gear up definitely worth having

You giving someone a great opportunity and putting loads of time into teaching and they let you down not a good impression.

Who's house are you building. I always thought this was yours but I'm not sure 😂

How random, I was getting calls to go cover the forks mon/tues in Maldon...small world 🙂

Circle saws look scary

Hi Charlie Why is Amy always trying to hide we have seen her quite a few times and really enjoy your videos nice one

There’s a dewalt block cutter dcs397t2xr good bit of kit better than using the circular saw

I’m from Canada and haven’t seen those blocks before, what are they made out of ?

Lisren mate get her on the forklift dont be messing about with the gonna does 🤔

Fck me, watching that was like therapy, like sittin' in a deck chair next to a quite lake in summer and just absorbing! Mad init!

Brick layers on a day rate. Good ones cover the money. On bad days they might not. Over the week it should balance out,or the prices are not right. The best contractors always gave a little bonus as well. You know Yourself Charlie it will kill the attitude of a bricklayer if he gets the same money every day.

Charlie if you get the chance I would much appreciate it if you tell me what type of blade you're using in that circular saw

When you first look at the video it looks like on the left there’s a horse rider on site. Go check it out

How much do you get per block ?

Another great day

Also is that cutter thing called a masonry saw

amy put young lads to shame she works her socks off

watching these videos on head cam makes me feel car sick

What trowel you using mate?

How frustrating is it when you do your bit to turn up for work and site is on stop for what ever reason. If i added up all the money ive lost due to agents forkie or materials 'Mixer etc. Thats why i just do privatr work now which also has its issues . Anyway good luck mate head down arse up as they say 😂👍 Justin brickright 👍

“I’ve got the blade on the wrong way round “