K-Tuned Short Shifter, Circuit Hero and Dimes solids bushings Install on Project EK 

I ment Rob. And his new born. Lol

Thank you!

Thanks for your support Alex!

No problems guys, keep up the great content and I'll keep supporting :)

Thank you!

That’s awesome you made your own!

Cost me about $6

Thanks!

I’ll look into that ! Thanks !

Thanks for tips Nick! What tranny is the 4.7 out of ? Or is it an aftermarket final drive? I’m a newb to this stuff. I hope you can get on track soon man!

Refine Movement no it is an M factory gear set. 500 bucks but worth it. Obx diff is about 350 not bad for what you get. The good thing is you will have a bullet proof trans at that point. There really isn't any swappable final drives for the d series unlike the B series. The B VTEC transmissions are different too. It is the countershaft that the final gear is attached to and they are different for all the transmissions. Your Si trans has good gear sets especially for the track, close 1 thru 4. 5th is short too so your rpms will be high cruising highways.

Thanks ! I have been thinking about trying do something for 20k not sure what though. Maybe a sticker giveaway of some kind

Circuit hero

It’s just about feel. The solid was a step up from the ES bushing, but it can be annoying to some as there can be unwanted vibrations. The ES was good for me on the street.

no issues with this version. KTuned sent me a lean back version recently that I will be installing sometime this year

We’re hoping for September. Yeah the bushings mount straight up. I’ve heard other people complain about the vibrations but it didn’t seem to change much at all for me. I like it alot

He means the engine mounts - with the solid shifter mount, any engine movement might compromise shifting.

Barbas Life that’s the integra radiator

george bonney90 👍🏻 or have a switch to just bypass the whole thing and turn them on when your at a stop. (As a double edge sword) when you have your car off, you can throw your switch on to cool your engine down. But if you forget you have them on, you will start killing your battery little by. little

Yeah in my opinion you'd only wanna jump the coolant temp sensor/switch if u have too, also by turning on the AC the fans will run, if u have AC

george bonney90 indeed I would go with your solution first and if yours does not work, go for a simple switch.

None

Yes I’ve heard of that but it’s seems to be fine on my car.

Have you found the part number perhaps?

That sounds like a good car to buy overall big plus that it has those new parts. My 1998 is the same car and has about the same mileage. For a daily driver it should be fine but with that mileage things will need to be replaced. the suspension and steering components could be all bad if they haven’t been changed in a while or ever ie bushings, tie rods, struts/shocks. Check the fluids to make sure they are newer and haven’t been there 2 decades. At 200k my power steering was leaking.

Refine Movement Thank You so much for your reply ! Ill check it out with a little more ease of mind then. Once im back in the honda game, ill have to rock one of yals stickers.

Sounds good man good luck! - Travis

my experience at those miles is to watch out for all the old coolant hoses and be ready to replace them asap if they are old and hard.

aw614 ill def check that out while im at it thanks!

Wow! That’s a huge difference I didn’t realize it would be that dramatic. Where did you get the wrap you used?

+Refine Movement Yeah, it did more than I thought it would, it'll also keep more radiant heat away from your radiator, oil pan, and intake. I got mine off eBay, just look up titanium header wrap, I think I got a 50ft roll and wrapped it all the way to the cat connection. Prevents burning yourself too if you need to do anything under the hood at the track. You can install it in an afternoon and do it wet or dry, overlapping half the wrap. I did it dry, just wear gloves and a face mask. It's been on over 2 years on a cheap eBay header, no cracks or issues. It really is amazing stuff, can't recommend it enough.

Awesome thanks for the tip I will probably do it!

That would be epic!

Refine Movement i wanna do it as well 👌 🏎

I had PU in there and they are better then stock but I wanted a firmer feel #becauseracecar

Yeah it’s real close but it does fit. Thanks for always being there to troll me. Much appreciated

Refine Movement hahaha. U got it lol. Just don’t ever take it personal.

I had the poly bushings for a few years and never felt much of a difference from stock. The solid bushings really gave me the feel I was looking for.

Refine Movement lol it’s in your head man.

Send me a B and I’ll put it in, no problem

Refine Movement understand how that is lol