KINGS AWNING IMPROVED with mods we made it better 

Me too

Same here

Ditto.

Look at 2:01. It's obvious.

Thanks I sure helps with rain

Maybe u can show a little more infonon the clamps or a little more indepth video on it

Have seen it and the price lol

Holy shit, they're more expensive than the awning. Flip that

use a nail and give it a gentle tap , mind the fingers, to give it a little mark or indent to guide you

It's just a flap of Velcro so when attach original flap it's joins straight not on an angle which just peels off in windy conditions

Just made little adaptor pieces but I am going to pull the awning apart and sew strips on they work awesome in the wind. Never come undone

@@robincoker225 thanks Robin. Any chance of a photo/description. I could see how well they worked but couldn’t figure out what you had done. Assuming double sided Velcro. I am just finishing making my spreader bars. Expecting a wet Christmas 😫

@@MrLaurieLewis its just 2 strips of velco (male/female back to back)sewn together one end, stick it on the original fixed velco on awning so flap faces back toward pole, u can see in the video quickly how it works, hope this helps

@@robincoker225 Ha! I did the exact same thing before seeing this video, good job m8

Home made

Buy the plastic clips from bcf, make the spreader bar from pvc tubing or old tent poles

I've bought a 275 cm long C clip T-nut spreader pole from Snowys to go side to side or you can buy an already 2.5m curved spreader pole from Drifta that goes from vehicle side of awning to the front of the awning. I'm also in Perth.

I have removed canvas and sown the Velcro strips on over original Velcro. The strip needs to be only sown on the end which becomes a flap of Velcro so the other peice of Velcro which goes around the pole can attach along it giving a better connection. The way you buy the awning the Velcro strips attach on an angle and peel off with the wind. If that makes sense

@@robincoker225 wow fast response, sort of makes sense, so you sew the new fluffy bit over the old, at the 1.08 mark it looks like the new hook part of it is a separate strap that is freely around the pipe which then attaches to the old reinforced velcro? But then mine is an old second hand one so it cost me nothing, i have also taken the old shitty cheap pop rivets out and replaced with heavier ones, and the cheap 6mm bolts holding the arms on are now M8 with nylocks and a piece of AL right angle to take the pressure off the thin walled extrusion when extended. the side bars are weird in that the spike on the end doesnt go all the way in because of the tarp slide extrusion so i put a small block in between the two thin walls to give it some more to bite into. It wouldnt take much to turn this thin wobbly device into something that would last much longer. Oh and the pop rivets joining the two mounting plates together were all but missing so heavier pops with bigger flanges were used and now shouldnt shake to pieces.

we made our own, don`t know where u could buy one

All good thank you 👍🏼

Tent world has HEAPS of poles and stuff you can mod.