It might not offer audiophile sound quality, but four beefy channels of over 1kW@8Ω each in a relatively compact casing are enough to make this a nice budget solution for audio amplification. It's enough for pushing almost any speaker cabinet to its limit.
2:32 The clone is longer due to the larger cooling fins at the back and not because of the two extra caps.The front section where the caps are located (between the front faceplate and fan supports), is basically the same depth when visually comparing both amps. -> 0:05
I think it was around $930 cad and they are both great Amps but if I were to purchase any more I think the build quality of the Sinbosen Amps is a little better
@@SoundGuy-vn3kl Yes my FP20000Q each channel connect with one unit dual 18" sub , they run very well. the supplier said this amp under 4ohms is stable
You never mentioned the heatsink in the front. It looks like the simbosian clone has full copper heat sinking vs aluminum on the sanway. Manitoba here.
The caps in the Sanway appear to be better quality/higher temperature versions and could even have higher individual,but and therefore the same, or even more overall capacitance as the Sinbosen, so saying with Sinbosen that More Caps=better doesn't take any of that into account. Overall great general info, but this point is accidentally somewhat irrelevant at least and actually misleading at worst while also ignoring the potential short longevity issue of cheap caps.
SoundGuy0000 I’m glad you have not had issues hopefully they rectified any problems. SANWAY themselves provided me schematics and advised me to remove 1 of the components located next to the PSU (white chip) I believe there is three side by side. They advised removing one of these stabilised the amp and helped against boards blowing. It did help but eventually boards would fail.
Marius Winter i I think the build quality of Sinbosen is better I never really did a torture test but both amplifier sound the same again if I were to pick from the two it would be sinbosen
Do these amps actually do 10000K rms watts rated continously and not peak? Provided that you have the AC in your house to back it up ... in other words , will this amp power 4 x 18in subs in a home theater for music , 10000watts continously?
I never did a metre test on the amplifiers but I compare this to the real lab gruppens and they are the same amplifier I am using them to run 4 18s right now and the amp does it effortlessly what kind of eighteens are you looking to run on the amp
In stadium sound they use 220v or 440v .... This amp will do what your house can give it most are 20 amps at 120 v in the USA.. So anyway you will get around 3000 Rms clean... With proper power, yes they do out out enormous power at 2 ohms 2 channels
This is for stadiums and line arrays...i.e. this amp pushes 4 pro subs to 12 or 24 mids high.....if you use it in your house with 2 speakers im sure you will burn them up!! Unless your fuse them
My 10 years models from sanway / gisen can work all weekend long. But it must be on separated fuses. Best result is 32A 400V power supply from the wall or power generator to the switchboard with 3X 230V 16A fuses - each amp have own. Last free socket is for lights and dj decks.
You could have sent that amp to bigdwiz aka Williston audio labs because I would guess it would be assume it would do nowhere near 100 watts rms in bridged mode and probably more like 30 to 50 watts rms per channel at 1 ohm even though it’s not 1 ohm stable in stereo mode
They are known to fail in the field, and the sound quality is not up to snuff. Get the Lab, the clones are garbage. If you make a venue pay you good money for a professional production, you should also bring reliable pro gear. If you don't, you're a con.
good morning God bless you brother you are still using the SINBOSEN FP10000 You had no problem with the amplifier, it has not burned or is in perfect condition...
I am interested in buying the sinbosen amplifier I see it with better components. Which one of the heats more mounts a video both working with basses and tells us your experience thanks soy de colombia
Gabriel Antonio Perez Muñoz yes I will be posting another video soon are you subscribe to my channel if yes then You will be able to see the next video and I will explain my experience with both amplifiers I am from Ontario Canada
Kevin Guthrie US $602.00 | AMPLIFICADOR DE POTENCIA dj 2000w clase td línea de 4 canales Array DS-10Q sonido aoue audio de escenario profesional a.aliexpress.com/k91kgf7i
@@SoundGuy-vn3kl ....thanks man ......... Im picking up a Fp10,000 and a fp14,000 for only $700 for the pair ,I was a lil skeptical because they wasn't actual lab gruppens, but you've given me confidence lol
Gabriel Antonio Perez Muñoz that’s a tuff choice they both sound the same I would have to put them through a torture test to really see the difference if there is any difference do you have some of them your self
@@SoundGuy-vn3kl how to do they compare to real Labs? I'm putting together my first system and considering going with one of these brands to power my subwoofers
Samuel Aubrey to be honest with you they are the same sounding amplifier everything is the same I did multiple tests with the real ones on the fake ones there is no difference in sound
Gabriel Antonio Perez Muñoz I have not tried the sinbosen yet but I think it might run cooler I will be doing another video with fp14000 sanway and fp14000 sinbosen soon but yes the sinbosen looks more robust for sure
My sinbosen fp10q blew up on me during an event. Ever since i got it it had a bad smell of hot electronics. Not quite a burnt electronics smell but still weird. I‘ve been running it hard a couple times and the smell stayed but it also kept working normally so i thought that was normal. During the event i suddenly noticed the level meter on channel a creeping towards clip. I turned it down all the way but it kept creeping up until it hit vpl, lit all leds and then literally blew up. A loud but deep „pop“. I still habe warranty but sinbosen customer support (alice and crystal wang) really take their time with replying. Now they send me a video tutorial of how to diagnose the amp myself. I‘m a bit worried to open it up. They told me they will send the replacement parts i need once i figure out what part failed. I have to pay for shipping tho… Also even if i get it fixed the blowing up just seems to be a symptom of another problem (probably related to the smell). I was very happy with the amp until this happened. I‘ll gladly take any advice or guesses on what the smell could be, how to best handle the repair and such. For anyone looking to buy one, they are good and well built amps. The money you save compared to the original lab.Gruppen just costs you proper support and you have to be prepared to handle any problems on your own. (Again please post tips or thoughts, i would really appreciate it)
Well, first things first what kind of power were you giving the amplifier and was the amplifier in a proper ventilated area? and what little did you have on the amplifier meaning ohms? There’s a lot of factor here. I have been running the these amps for over 10 years. Never had a problem once and I run them very hard.
Where's the speaker and voltmeter?!(!?.. You really compared nothing!!!!!!.... Please bro try it again use music. use a speaker. use a voltmeter and your ears for clean music and give us some voltmeter readings!!
they shouldn't be korean amps are virtually the same but the brands don't sue each other so why would Lab also Lab knows the guys who can afford buys their products in a heartbeat those who can't run the clones or even lower brands this doesn't hurt their market one bit as these clone brands generally are not as popular as lab so yeah...
@@erikbritz8095 Problem is that these amps will get out into the used market, where the originals are actually selling for an affordable price. These assholes ruin the industry.
Campbell Hicks That’s impossible there might be something wrong with the device that you’re watching it from You were the first person to say that they cannot hear me
Better to buy the real thing then a clone with shabby parts, you get what you pay for when it comes to professional amplifiers... Wouldn't ever trust one of these in a important situation...
To anybody watching this. The reliability and sound quality of these copies are far from that of the Lab amps. If a venue pay you to do a good production, you should honour that by providing them with reliable high quality gear. I would say that anybody whi's doing something professional with these, are robbing and conning their clients. Personally I hope karma will be a bitch and that the use of such a product like this, will cause major system damage and eventually put any pro user of this garbage out of business. Shame on you for using it and promoting it.
how many things are made in Sweden? UK? USA? maybe iphone? Void? Danley? LabGruppen? I believe that you can order anything from China, pay 25% of the price because in EUROPE or USA, there is some rich people with fancy cars and fancy houses ...with huge costs, expensive champagne and deluxe bitches.... and the price for the "brand" pro are going to the "pleasure" ... how much? 75%... Mercedes fall and fails, spit all the traditions, make cars components in Romania, WAKE up!!!! Mackie fall and fails!!! EV fall and fails!!! and so on...I want to buy a macbook pro...is made in China... I want to buy ECLER ...same China... I am not chinesse, but I can't eat rich thieves and neither politicians who are their friends by giving laws for them, against people that works... In China a product is build with $130, in Romania is selling with $360 !!! HELLLOOOOO the guy who work take 130 and the rich-smart guy take 230????? and say it is original "pro" product? really? c'mon why? because the store rent is expensive? who establish the high price? why not to buy online at 130? I must "send" my money "in" the rich fat smart guys that own expensive buildings? hell noooo
"There IS 12 caps...5 fans..." Ever heard of the word 'are'? "more thicker"? - are you not an native English speaker? I mean, maybe you're not...I hope you're not.