Laser Engraver Easy Waste Board - Design Your Own in Lightburn - PART 1

Подписаться 5 тыс.

Просмотров 25 тыс.

50% 1

This is a 2 part series where I show you in this video how to easily design your own Laser Engraving Waste Board directly in Lightburn software.
The purpose of a waste board is to help you easily align your work to be engraved in the perfect position every time so you don't waste time having to re-do jobs.
It also protects your own furniture from "silly mistakes" that may happen from time to time.
In the next video in this series, I'll engrave the design and set-up my Ortur Laser Master 3 and "attach" it to the waste board, with a couple of little tricks to make sure you get perfect allignment every time. Here's the link for that video • No More CROOKED jobs -...
Thanks for watching, be creative and stay grateful. :)

Хобби

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@malcolmconnor6602 Год назад

Darren watched all of your videos and found them very informative. Your knowledge of Lightburn is impressive for such a short time using it. What you know about photo processing is bringing an entirely different prospective to laser engraving. I would like to thank you for the hard work put in to making these videos and look forward to watching and learning much more from them. One other comment, the quality of the videos and audio is outstanding.

@mrcraftsmith Год назад

Hey there Malcolm - I really appreciate the kind feedback - thank you - I’m happy to share my knowledge with others as I learn more about this craft.

@brad_neal Год назад

Great video. Can't wait for part2!

@mrcraftsmith Год назад

Thanks for watching Brad - part 2 coming soon 👍

@MTRUITT95 Год назад

Great to the point video! Keep them coming.

@mrcraftsmith Год назад

Thanks - I appreciate you tuning in - more to come

@Jeff1Jeff2Jeff3Jeff Год назад

WOW! Thanks .. I learned a few things from this vid. Great job!

@mrcraftsmith Год назад

Great stuff Jeff - thanks for tuning in 🙂

@flintread2303 Год назад

Thanks Darren, love your style I am getting my first diode laser next week and am binging many videos before hand and so far yours are in the top two and the only competition is that the other guy has about 100 videos so far except for that there not even daylight between your clear style and helpful tips! Keep up the good work mate! Can't wait to see more.

@mrcraftsmith Год назад

Thank you for the kind words - very much appreciated. I was at your stage only a couple of months ago myself - it is super exciting though and I’m sure you’ll love it when it finally arrives. I did the same thing you are doing and soaking up as much information as I could 🙂

@flashcorp76 Год назад

You are a master at this. Will have to watch it a couple of times over😊Very concise and to the point.Thanx

@mrcraftsmith Год назад

I’m happy to share what I learn Flash - if I left it too long in my head it would end up in the abyss 😀

@burtgraham3689 Год назад

Like the video Darren - will have to look at it a few more times and then try an engrave or two

@mrcraftsmith Год назад

Thanks for watching Burt - I reckon the benefit of understanding how to do it means you can create any number of custom waste grids depending on the application 👍

@AussieshopForAll 8 дней назад

If you put Text into Line instead of fill, it will be much faster, it will do the same way but will do lot faster

@mrcraftsmith 6 дней назад

Depends on the font used - I prefer fill over line which just gives an outline

@michaelmcdonough1989 Год назад

Daren, I am an OG(75) and started using Lghtburn for less than a year and have not seen a video like this one. Your presentation skills are outstanding. I enjoy the way you present a lesson. Thanks. BTW would you share your file?

@mrcraftsmith Год назад

Hi Michael - thank you for watching and your generous praise - as for the file - I might be being a little cheeky - but the video runs through creating the file yourself 😁 - I have every confidence that you will be able to make it yourself - keep me posted

@jeffbarnes2014 10 месяцев назад

Darren just subscribed to your channel , your video was easy to watch and very informative. I am brand new to the hobby and learning everything I can , Thanks

@mrcraftsmith 10 месяцев назад

Hey there Jeff, thanks for the subscribe - there is heaps to learn and plenty here on RU-vid with a bunch of creators to help progress your hobby. :)

@steveparry7364 6 месяцев назад

Thanks, follow the steps EXACTLY or you are screwed!@ I kept forgetting to highlight the numbers! BYW.... you can just space your rows by 10mm instead of stretching them later!

@mrcraftsmith 6 месяцев назад

Thanks Steve - appreciate you watching and thanks for the tip

@RTSFoto Год назад

Nice tutorial Darren, or it would have been if I was called Einstein. I am far from computer literate mate, so I understood very little of the subject you have been explaining. Although the grid you created was first class buddy. In my case I will have to have a look online for something similar and download a file. Thanks again for your tutorials, I am learning from most of them mate.

@mrcraftsmith Год назад

Hey Russell - I do appreciate you taking the time to check out my videos - it all starts with small steps - if you pause the video at each step it m confident you can make it work 👍

@masterkey603 7 месяцев назад

Very informative and interesting

@mrcraftsmith 7 месяцев назад

Thanks for tuning in Ravindra - glad it was helpful

@philnoel5839 6 месяцев назад

Top Job Matey.

@mrcraftsmith 6 месяцев назад

Thanks for watching Phil

@lindahanson9132 Год назад

Darren.... Thank you so much! I did it! (Only with your help!) The numbering was a little tricky for me. I think this will be a big help for me!! Are you in Australia? We have a friend that lives in Perth / Manjimup family.

@mrcraftsmith Год назад

Awesome Linda - Great to hear you got it working for you - yes, I am in Australia - I'm on the east coast of Australia, Sunshine Coast in Queensland - look it up - it's a beautiful spot to live :)

@abusam1 9 месяцев назад

Thank you Darren for explaining in detail how to make wasteboard grid, array & CSV is great idea. I am using Inkscape for design and LaserGrbl for engraving the grid on MDF, in Inkscape how much should I set the stroke width for the lines on the gird (not sure whats the minimum in mm) for engraving with LM2 pro 10A?

@mrcraftsmith 9 месяцев назад

Hey Abu Sam - glad you found it helpful - I'm not all that familiar with Inkscape however in reality you only need 1 pixel width for the stroke as you are engraving a line, not trying to "fill" the line - hope that helps :)

@Bakerfamilyvideos 10 месяцев назад

Thanks alot!

@mrcraftsmith 10 месяцев назад

You're welcome!

@thorus528 Год назад

Great videos. Thanks Darren. I just can’t understand why you make your scale start at 10mm rather than 0mm. Hope you will explain in Part II what I have missed.

@mrcraftsmith Год назад

Hey there that is a valid question - I wanted to add the labels on the outside of the grid - if I started at 0mm I would not have space outside the grid as the maximum work area is 400mm x 400mm - does that makes sense?

@thorus528 Год назад

@@mrcraftsmith Thanks for the quick reply. Yes, that makes perfect sense. I am thinking of moving my labelling inside the grid, using thicker lines every 5 cm (once I worked out HOW). I also want to fix some kind of hard stop in that 0/0 corner to push the material against and then figure out a way to clamp objects down to the wasteboard (maybe something with inlaid nuts). Since I working with a moving bed I worry things might slide around at faster speeds.

@mrcraftsmith Год назад

Sorry I missed this one - what sort of speeds are you using that you think your work is going to slide around?

@freddyvancamp4768 6 месяцев назад

Hello perfect video , is part 2 already online ?

@mrcraftsmith 6 месяцев назад

Certainly is Freddy - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zuqAwdt-4nY.html

@DanielFigueroa-kd2yt Год назад

Hi Darren, thank you for the amazing videos, I'm learning a lot! I'm trying to make the grid but I got stuck when drawing the first line, I followed step by step but everytime I draw the line it shows Width: 1.644, so when I array, at the line 33 it shows all the grid full, but it doesn't match the grid lines. When I try to put a 0 in width, the line disappears. Could you help me realize what I'm doing wrong? Also, I have the extension kit, so I used 830 for height. Thanks!!

@mrcraftsmith Год назад

Hi Daniel - I’m away on location for a live stream event we are producing - do you mind if I have a look at this early next week when I get home - in the meantime perhaps do a screen recording of what you are experiencing and I’ll take a look

@DanielFigueroa-kd2yt Год назад

Hi @@mrcraftsmith , sorry for the delay, I started the project from scratch and I managed to do the grid! I’m still finishing but had to travel. Thank you for all these helpful videos!

@mrcraftsmith Год назад

Glad you worked it out 👍

@OakleefMoto 4 месяца назад

This was great. One question though - When I do the numbers and load my CSV file and I hit Preview or Bake, I get a bunch of ";" after. So it looks liks 10;;;; 20;;;;; etc.. Any idea why?

@mrcraftsmith 4 месяца назад

Thank you & you're welcome - can you shoot through a copy of the csv and I'll take a look

@OakleefMoto 4 месяца назад

@@mrcraftsmith Can't really send files here, but it's a single column, starting from 10, going up to some number.. Nothing else in the file.

@jamesanderson7407 Год назад

@mrcraftsmith Год назад

Thanks James

@neco72 5 месяцев назад

Thank you Darren. Any possibility you can share this waste board in svg?

@mrcraftsmith 5 месяцев назад

Just out of interest, any reason you can not create it yourself following my example?

@neco72 5 месяцев назад

@@mrcraftsmith you’re right. You explained it super well. I just received my first laser and it’s pure lack of time. I have to learn how to use it

@RoamingMustang 7 месяцев назад

Hi Darren, since you've posted the video, have you updated to the last version of lightburn 1.4.04? The snapping to grid doesn't seems to work for me, it won't snap to the grid at all while holding ctrl, or alt as mention in the documentation, just wondering if it's the same for you?

@mrcraftsmith 7 месяцев назад

I haven't updated to that version yet - and am about to head away on a break for 5 weeks - something for me to look at in the new year - thanks for the heads up

@RoamingMustang 7 месяцев назад

@@mrcraftsmith posted the issue on lightburn forum, tried again the next day after trying to debug it for a few hours and it just worked... Don't know why, probably a random bug ^^ enjoy the time off! Cheers

@mrcraftsmith 7 месяцев назад

good to hear - I will certainly enjoy the break - Merry Xmas :)