Тёмный

Leveling Kit Install and Wheel Spacers on a New Silverado 

TWA Motorsports
Подписаться 71 тыс.
Просмотров 77 тыс.
50% 1

Leveling Kit Install and Wheel Spacers on a New Silverado
Parts Used
Level Kit amzn.to/3imHaS2
Wheel Spacers amzn.to/3hK4ie2
Tools Used
Wheel Chocks amzn.to/3kyvG0u
Torque Wrench amzn.to/3dHIwoO
Metric Sockets amzn.to/3gQO96f
Gloves amzn.to/33JM70i
Dewalt Impact amzn.to/3hFm5U8
Rolling Chair amzn.to/2Zx8bt4
Strut Compressor amzn.to/3ev0YBo
I'm sure you guys are thinking I bought another vehicle. Actually this is an old co workers Dad's Truck. It is a 2021 Chevrolet Silverado. He wanting me to install a 2.5/1.5 leveling kit and a set of wheel spacers or wheel adapters. In this video I will show you how to install a cheap leveling kit on a 2019-2021 Chevy Silverado. This leveling kit will also work for 2019-2022 GMC Sierra. I also show you how to install wheel spacers or wheel adapters on a 2019-2021 Chevy Silverado. As many of you know I am not much of a lift guy but have to say this new look with the level and wheel spacers looks great and I may have to do one down the road for myself. I also got a chance to drive it down the road afterwards and it rides just as good as stock. For a cheap Silverado or sierra leveling kit I think this works great.
Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Subscribe and Follow TWA Motorsports
RU-vid: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/2Of60Z0
Gopro Hero 6 Black amzn.to/2NGLPxT
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/2NawHtz
Photo editing amzn.to/2NawHtz
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

Авто/Мото

Опубликовано:

 

18 июл 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 230   
@allmyfriendsaredead3107
@allmyfriendsaredead3107 2 года назад
One of the few good channels without any overpowering music, just narration and work. Keep it up 👍🏻
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. I do put some music in every once in a while
@abdulrahmanalnajdi1784
@abdulrahmanalnajdi1784 2 года назад
Among everyone on RU-vid in this field, but you are the best because of the amount of diversity in cars in each video. Especially with GM vehicles. Great work
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you very much for that comment
@Mjc103
@Mjc103 2 года назад
Thank you for showing more of the "how to." I really like this video!
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you.
@Alanc419
@Alanc419 2 года назад
Yes, I totally enjoyed this video. I just bought a used 2019 Silverado LT and I wanted to give it the ‘Trail Boss’ lift, without spending Trail Boss money. I wanted a little lift, but I do tow, so I wanted more than a level kit. So your video was perfect for me! I wanted to see / learn what was involved with the rear! Thank you for making / posting!
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. I appreciate the comments
@mrclean146
@mrclean146 2 года назад
I might have seen a few of your videos. I love dropped trucks but this came through because I brought a new truck and thinking about a lift. I didn't want to go crazy so this looks right up my alley. This is going to be a watch later again video. Thanks. Subbing.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you for watching and subscribing
@chrisjmiller6
@chrisjmiller6 2 года назад
Big improvement! Always enjoy the videos
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@alexbasil6515
@alexbasil6515 Год назад
Great vid. Great content, super detailed, and without the BS.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you
@larrydeaton5452
@larrydeaton5452 2 года назад
The truck looks good. I like lowered trucks but I get it because it is a 4WD. Great instructional video Travis.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you Larry. Me too Lol
@doug81337
@doug81337 2 года назад
Did help the look of the truck...im just not too into these yet...and I see them at work everyday 😄
@TWAMotorsports
@TWAMotorsports 2 года назад
Yeah looks better but I'm not sold yet.
@davidgutierrez8902
@davidgutierrez8902 2 года назад
Looks very very good. Good work and good explanation thanks man!
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@jaysongomez6907
@jaysongomez6907 2 года назад
Thank you for taking on a current gen Silverado, can't wait to see if you ever slam one on the ground or a current gen Yukon / Tahoe with that IRS, for now I'll enjoy my slammed 04 Yukon keep up the good work 👍
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. Maybe eventually
@bryanpadilla4526
@bryanpadilla4526 2 года назад
Nice job !
@jrszabo900
@jrszabo900 Год назад
I just did this to my 2021 and I installed the studs to mounting bracket for the strut from the bottom and then used the factory nuts on the top. After I did that I held the spacer up in postion and marked. It made things easier.
@TWAMotorsports
@TWAMotorsports Год назад
Nice. Definitely easier I bet
@wotysgtb4348
@wotysgtb4348 Год назад
Did the front level kit change the ride quality at all
@davedonlick2146
@davedonlick2146 2 года назад
Definitely made an improvement!
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. I thought so
@lilplaya4200
@lilplaya4200 2 года назад
Drive a lifted Suburban 7.5in on 22x12 on33s. Next is my dad's 94 suburban dropped. Love the videos 👌👌👌👌👌
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. Sounds like some good projects.
@sonofthunder3168
@sonofthunder3168 2 месяца назад
Perfect, well done presentation. You have absolutely convinced me I need to hire this out. Or buy a lot of stuff.
@TWAMotorsports
@TWAMotorsports 2 месяца назад
Thank you
@keilylmm6377
@keilylmm6377 2 года назад
Good Monday evening TW.. wow that Z71 is sweeeeeet 👍.... Lift it... WOW.. that's very clean underneath... Nice set up he bought.... Looks great.. The only thing is I'm not a huge fan of wheel spacers.... But if you get a good brand it's a plus... 👍. Your you tube gear looks and sounds great on my surround sound system TV in my living room 👍🇺🇲
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you Keith. Its nice to do something different
@joe.b206
@joe.b206 2 года назад
It looks good, Definitely more aggressive! All it needs now is a wheel and tire. 👍🏽
@TWAMotorsports
@TWAMotorsports 2 года назад
I agree with that
@adolfocarrillo4312
@adolfocarrillo4312 2 года назад
Great content Kool vid Travis
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@bcruz264
@bcruz264 2 дня назад
Love it!
@TWAMotorsports
@TWAMotorsports 2 дня назад
Thank you
@cfrank925
@cfrank925 Год назад
Looks good!
@TWAMotorsports
@TWAMotorsports Год назад
Thank you
@Scrappydoo6628
@Scrappydoo6628 Год назад
I finally got around to watching this video. I love how thorough you are. This is a nice simple lift that looks good. Do you know if he was able to get a good alignment after this was done? Yes do more lifts/levels.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. He didn't say they had issues with alignment
@georgeronquillo1851
@georgeronquillo1851 2 года назад
Awesome video. That truck is definitely in good hands. With wheel spacers, speaking from experience. Always make sure they are hub centric and MADE IN USA 🇺🇸. Some guys even put a bit of blue thread locker for peace of mind.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. It was nice to do something different
@dicklarge1901
@dicklarge1901 2 года назад
I have the same truck. Good video.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@whatsupwithsteve
@whatsupwithsteve 11 месяцев назад
I like it. Not too much, just looks a little meaner with that levelling kit.
@TWAMotorsports
@TWAMotorsports 11 месяцев назад
Not a huge change
@Dumbass_mechanic
@Dumbass_mechanic Год назад
I've done a few of these. On the front, there isn't any need for the spring compressor. Also the 2ay the spacer is supposed to work is... there are socket headed bolts provided, and they are supposed the thread in from the bottom side, and then point up forming a stud just like the original strut. Then the spacer sits on top of the strut and nuts onto the original studs with the provided washers and nuts. You than spin the entire assembly around 180⁰ degrees and put it back in the truck and use the original factory nuts to mount it to the frame just like factory.
@TWAMotorsports
@TWAMotorsports Год назад
Yes in this cheapo kit that wasn't the case
@0isbrabra0in
@0isbrabra0in 8 месяцев назад
To protect your threads when using a pry bar, thread on the nuts and use them as your surface. Also, e brake will hold the back rotors and just have some apply the brakes while doing the front for torquing without wheel.
@TWAMotorsports
@TWAMotorsports 7 месяцев назад
Definitely good advice
@danielhibbard2391
@danielhibbard2391 2 года назад
Great video as always lil bit easier have someone hold the breaks to torque them spacers lol
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you Daniel. Thats for sure
@kuhndog-1196
@kuhndog-1196 2 года назад
Nice to see something get altitude on your channel lol.
@TWAMotorsports
@TWAMotorsports 2 года назад
I thought it would be a good change of pace.
@natem3977
@natem3977 2 года назад
Hey I’ve got a lowered Chevy, and a leveled Ford. Variety is good.
@TWAMotorsports
@TWAMotorsports 2 года назад
Nothing wrong with that
@eddiescoseria5884
@eddiescoseria5884 4 месяца назад
Thank you for this video!! Why do some people say not to lift from the differential? It drives me crazy. I see a lot of people do it, but something in my head says not too...
@TWAMotorsports
@TWAMotorsports 4 месяца назад
Glad I could help
@jayala26
@jayala26 2 года назад
Nice job. Well done. Looks really good.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@pmarable12345
@pmarable12345 Год назад
Definitely do more lifts
@TWAMotorsports
@TWAMotorsports Год назад
Probably need to
@mavsstuff
@mavsstuff Год назад
Great video! One of the best I've seen regarding the new Chevy trucks. I purchased a MotoFab lift kit that I will be installing soon on my 2020 Silverado. I'd like to know what strut compressor was used in the video? I did try the link that was provided, but it doesn't work. Thanks.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. Mine is a cheap one. I think I listed in video description
@onefastlife5017
@onefastlife5017 17 дней назад
Oooohhhh , you did a leveling kit without doing UCA’s…. Oh no!!! 😂😂 I’m just busting your chops, good stuff, I’m getting ready to do a leveling kit on my 19 elevation with 2” spacers also ! Awesome how to !
@TWAMotorsports
@TWAMotorsports 16 дней назад
Imstall parts I was given. Just showing the process. Lol
@onefastlife5017
@onefastlife5017 15 дней назад
@@TWAMotorsports you know how gm guys are, absolutely prohibited to do a leveling kit without UCAs lol 😂
@TWAMotorsports
@TWAMotorsports 12 дней назад
I get it
@dominionn09
@dominionn09 4 месяца назад
I wonder if you could fit some bigger tires on those stock rims that would look nice
@TWAMotorsports
@TWAMotorsports 4 месяца назад
Probably
@TheDieseldog
@TheDieseldog Год назад
Those Allen bolts should of threaded up through the bottom of the spacer. The new nuts thread the spacers to the struts. Then the oe nuts thread over the Allen bolts like stock. Just for future reference.
@TWAMotorsports
@TWAMotorsports Год назад
Not with this cheap ebay leveling kit
@10V3JustChuck
@10V3JustChuck Год назад
Very well put together truck and video. Did it seem like the front was sitting higher than the rear if so was that the desired look?
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. It did look a little higher but was even.
@Tanner8585
@Tanner8585 2 года назад
Bout to lift mine! Thank you!
@TWAMotorsports
@TWAMotorsports 2 года назад
Hopefully it helps
@MDMOO5
@MDMOO5 2 года назад
Great video ! one thing i noticed is that after you put the strut back in that the shock was facing the same way as you took it out.so what 180 turn did you do?
@TWAMotorsports
@TWAMotorsports 2 года назад
Yes. It has to turn.
@jamesvolk7100
@jamesvolk7100 Год назад
Came across your video. Very good . I am going to install the 3inch front 2 inch rear. Same deal. How did you turn the strut once you compressed the spring?
@TWAMotorsports
@TWAMotorsports Год назад
Should turn easily when compressed
@bryanpadilla4526
@bryanpadilla4526 2 года назад
I have a 2022 silverado. I want the same thing done . Wish u lived in Arizona
@TWAMotorsports
@TWAMotorsports 2 года назад
Yeah that's a ways off
@user-qu5oi3et8k
@user-qu5oi3et8k Год назад
is a allignment needed after installing that spacer boss...
@faridgadimov5955
@faridgadimov5955 2 года назад
I am thinking about doing basically same thing to 2016 escalade esv.and 285 70 r17
@TWAMotorsports
@TWAMotorsports 2 года назад
Its not a bad job
@joefutino9253
@joefutino9253 Год назад
Awesome video - really well done and simple. Do you think I would need to replace the upper control arms for a 2" level? Thanks in advance! Joe.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. I don't know as I rarely do lifts.
@impala-wf2sd
@impala-wf2sd Год назад
I did a 2 inch level on my 21 rst & did not need a uca. Still running stock 20 inch wheels... u will need an alignment
@TWAMotorsports
@TWAMotorsports Год назад
👍
@user-qu5oi3et8k
@user-qu5oi3et8k Год назад
because i did the same thing with no alignment and my out side of my tires are showing alot of wear
@bobavs8495
@bobavs8495 2 года назад
You should do more lifts ....
@TWAMotorsports
@TWAMotorsports 2 года назад
I may in the future
@user-qu5oi3et8k
@user-qu5oi3et8k Год назад
did u have to get a alignment after that boss
@Redfishdaddy
@Redfishdaddy Год назад
Curious about the tire size. It looks awesome.
@TWAMotorsports
@TWAMotorsports Год назад
Wish I could remember. Its not mine
@gabrielnever1133
@gabrielnever1133 2 года назад
Good job Travis'
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@Danman1972
@Danman1972 2 года назад
Man...someone is gonna have to replace those struts eventually and will not like you. The good news is I believe that Loctite does have some anti-seize properties in that it will prevent dis-similar metals from electrolysis like aluminum gets with most any bolt. Blue is a better option than red IMO, like you did. I think that anti-seize is a better option and I would have mentioned that to the fella your doing work for. A pervious owner of a dirt bike used oxide bolts like that for pinch bolts on an aluminum triple tree (holds the forks on the motorcycles). Rust all in them from washing and mud. Very visible on the bike. I know its a dirt bike, but there is a reason the OEM bolts have a dipped coating on them to keep them look good and the rust out. The first time I pulled them out it started to mess up the aluminum the threads in the clamps. That is like a 500 dollar or better pain of a part to change. I ended up using dipped OEM bolts from KTM to replace with anti-seize compound. No issues coming loose and IMO one of the most important parts on the bike to torque correctly.
@TWAMotorsports
@TWAMotorsports 2 года назад
I agree 100% I warned him but thats what he wanted. No way I was using red on them.
@Stephen-wh7vl
@Stephen-wh7vl 6 месяцев назад
Anyone know if a lovely jit will solve me clearance issues after spacers
@knapptasticmedia
@knapptasticmedia 2 года назад
I can't believe how much them trucks cost... looks good.
@TWAMotorsports
@TWAMotorsports 2 года назад
It is crazy!
@adamsalum9181
@adamsalum9181 2 года назад
You didnt have to compress the spring...you could of used a bar and turned that bushing to get the 180 angle. Other than that, you did 👍
@TWAMotorsports
@TWAMotorsports 2 года назад
I could not get it to move like ones in the past.
@lucasbarton7246
@lucasbarton7246 2 года назад
When you torque the wheel spacers why not just put the e-brake on, instead of risking damaging the wheels studs with a pry bar. That always works for me
@TWAMotorsports
@TWAMotorsports 2 года назад
It does in the rear. I am careful not to let it ruin the threads
@Nazrk3
@Nazrk3 2 года назад
I want to see you drop a new Chevy!!
@TWAMotorsports
@TWAMotorsports 2 года назад
I need to
@moodondie
@moodondie 2 месяца назад
I've got the strut off and the spacer on. I also have spring compressors on each side of the spring but can't get the strut to rotate. What's the trick, do you have a video of you rotating the strut 180 degrees?
@moodondie
@moodondie 2 месяца назад
Got it. Ended up using a vice, strap wrench, and spring compressors. Worked great!
@TWAMotorsports
@TWAMotorsports 2 месяца назад
Glad you got it figured out
@ivan-7774
@ivan-7774 2 года назад
🤘🏽
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@sparker2289
@sparker2289 Год назад
Aren't you supposed to put them stud bolts in from the back side before bolting it on?
@TWAMotorsports
@TWAMotorsports Год назад
You don't have to
@juliorubalcava95
@juliorubalcava95 2 года назад
How did the sway bar link come out mine keeps spinning when I try and take it off
@TWAMotorsports
@TWAMotorsports 2 года назад
Has a insert on the end to insert metric hex to keep from spinning
@ecc5119
@ecc5119 2 года назад
Why not use the emergency brake for torque procedure on the rear spacer/wheels? Try black RTV instead of blue lock tight on the threads.
@TWAMotorsports
@TWAMotorsports 2 года назад
That works on the rear. He wanted locktite
@ecc5119
@ecc5119 2 года назад
@@TWAMotorsports put some on threads. It will not allow it move and be easily removed later. I used to put it on my turbo studs/header. Cleans off with brass brush.
@TWAMotorsports
@TWAMotorsports 2 года назад
I would have done that be he was adamant about loctite lol
@Ad48069
@Ad48069 2 года назад
@@TWAMotorsports for the front all you have to do is have someone press down on the brake pedal while you torque them.
@Wallacebjn
@Wallacebjn 4 месяца назад
Any update on how this worked out for your buddies dad? I was wondering how the upper control arm held up with the extra force on it.
@TWAMotorsports
@TWAMotorsports 4 месяца назад
I haven't heard any complaints
@Wallacebjn
@Wallacebjn 4 месяца назад
Good to know thanks for the reply.
@TWAMotorsports
@TWAMotorsports 4 месяца назад
@Wallacebjn you're welcome
@MrDutch1e
@MrDutch1e Год назад
Those wheel spacers look like they are definitely not the right hub size since you can move it up and down while it's all the way on. Sketchy. Also the Allen key bolts are supposed to thread up from the underside of the spacer so the bottom of the bolt goes up and threw the strut tower and you use factory nuts to mount them up. Everyone does it this way tho making it a lot more hassle.
@TWAMotorsports
@TWAMotorsports Год назад
Instructions were sketchy. Cheap parts are what was at play here. Lol
@MrDutch1e
@MrDutch1e Год назад
@@TWAMotorsports ya that's fair. The rancho struts confuse me a little to. I thought those only came on the trail boss. Meaning upper control arms probably won't last long with a 4.5" over default silverado height lol.
@TWAMotorsports
@TWAMotorsports Год назад
This was install parts for a friend's dad they ordered situation. I offered my thoughts but did what they wanted. Lol
@Steele9026
@Steele9026 11 дней назад
so stock height trucks that arent at4 or trail boss come w no rear spring plates? springs just rest on axle?
@TWAMotorsports
@TWAMotorsports 10 дней назад
No idea. This was really base crank window truck.
@Rolando083
@Rolando083 Год назад
What's the difference between the Strut spacer Leveling Kit and the one that u mount under the shocks is any one better than the other one
@TWAMotorsports
@TWAMotorsports Год назад
No idea. These parts were brought to me
@edwojeck3567
@edwojeck3567 Год назад
Did you need to take out the battery box on the passenger's side to remove the strut?
@TWAMotorsports
@TWAMotorsports Год назад
No I didn't
@2anick414
@2anick414 2 года назад
Any issues after the instal with rear shock length being to short? Some kits recommend longer shocks or an extender when adding rear blocks.
@TWAMotorsports
@TWAMotorsports 2 года назад
He hasn't complained of any
@2anick414
@2anick414 2 года назад
@@TWAMotorsports thanks
@TWAMotorsports
@TWAMotorsports 2 года назад
You're welcome
@edruiz1202
@edruiz1202 2 года назад
You are very knowledgeable!!!! So question, is it true those spacers are not recommended for the new trucks??? I have a 2021 Sierra and a local installer commented that the rough country spacer are better. They have a plate up top and something else in the bottom. He says those you are using may be bad for ball joint?
@TWAMotorsports
@TWAMotorsports 2 года назад
As long as they are quality ones I see no issues with one wearing ball joints more than another.
@edruiz1202
@edruiz1202 2 года назад
@@TWAMotorsports thanks for the response. Would it be safe to say even a 2.5 would also work without having ball joint issues???
@TWAMotorsports
@TWAMotorsports 2 года назад
I would think so if hub centric
@edruiz1202
@edruiz1202 2 года назад
@@TWAMotorsports one more question. I have the 2021 SLT Sierra 2 WD. Would you recommend just a 2 1/2 level or do both the front and back??
@TWAMotorsports
@TWAMotorsports 2 года назад
Generally they are an inch higher in back so depends on what you are looking for.
@CRMAG87
@CRMAG87 11 месяцев назад
I see that you left in the shim that is at the bottom of the leaf pack. was the pinion angle still in spec? i have the 2.5 inch tapered block for my lift and have received mixed answered on leaving the shim in.
@TWAMotorsports
@TWAMotorsports 11 месяцев назад
No issues with it in place.
@CRMAG87
@CRMAG87 11 месяцев назад
@@TWAMotorsports that is good to hear didn't want to fight driveline vibration if it wasn't suppose to be in.
@TWAMotorsports
@TWAMotorsports 11 месяцев назад
I sure didn't notice any
@user-qu5oi3et8k
@user-qu5oi3et8k Год назад
people are talking me i need biger arm controls to fix that outside wear on my tires... is that true boss
@TWAMotorsports
@TWAMotorsports Год назад
Maybe. I have only done this one for a friends dad
@carloselizondo7497
@carloselizondo7497 Год назад
What size of kit you use. You’re link has several size. And I want the exact size for my 2021 Chevy. Its exactly like that truck. Same color also. Thanks in advance.
@TWAMotorsports
@TWAMotorsports Год назад
Customer brought it. 2.5/1.0 i believe
@kcsparrow616
@kcsparrow616 2 года назад
Truck looks great. What kind of Silverado is this? I have a 2020 RST and want to level it out. Was thinking of a 2” level but don’t want the front to look higher than the rear. Would that have been a problem if you didn’t but the rear block in?
@TWAMotorsports
@TWAMotorsports 2 года назад
I think you would need a 1.5 up front to be level. This is a very base 2021
@kcsparrow616
@kcsparrow616 2 года назад
Is that why you did a 1” block in the back ? Thanks
@TWAMotorsports
@TWAMotorsports 2 года назад
Yes
@kcsparrow616
@kcsparrow616 2 года назад
Thanks!
@TWAMotorsports
@TWAMotorsports 2 года назад
You're welcome
@user-qu5oi3et8k
@user-qu5oi3et8k Год назад
did u have to get a allinment after boss
@TWAMotorsports
@TWAMotorsports Год назад
Yes
@laningreen3348
@laningreen3348 2 года назад
hey do you know what tire size A/T tires that he has on the truck.
@TWAMotorsports
@TWAMotorsports 2 года назад
I don't. Was a friends dad's truck
@snopro505
@snopro505 Год назад
Tried the link for the kit, and it shows fitment as 2007-2018 Silverado & Sierra 1500 2.5
@TWAMotorsports
@TWAMotorsports Год назад
It should be the same
@marianohernandez198
@marianohernandez198 2 года назад
Do you have to do any alignment
@TWAMotorsports
@TWAMotorsports 2 года назад
Not required but wouldn't hurt
@jakedagostino4138
@jakedagostino4138 5 месяцев назад
Are you sure you put those top hat bolts in correctly?..
@TWAMotorsports
@TWAMotorsports 5 месяцев назад
Per the cheap ebay instructions
@wotysgtb4348
@wotysgtb4348 Год назад
Does this change the ride quality at all
@TWAMotorsports
@TWAMotorsports Год назад
I didn't notice a big difference
@1duramaxhd
@1duramaxhd 2 года назад
Just jack up leaf springs, don’t have to remove shock, and lower axel. Don’t make a simple , simple job hard !!!
@jaimeavila8714
@jaimeavila8714 2 года назад
You should get one and lower it
@TWAMotorsports
@TWAMotorsports 2 года назад
I agree
@felixls6191
@felixls6191 Год назад
Are you able to do this lift on a trail boss
@TWAMotorsports
@TWAMotorsports Год назад
Not sure
@albertblake1881
@albertblake1881 2 года назад
What size spacer where they ?
@TWAMotorsports
@TWAMotorsports 2 года назад
Link in description
@jimmyboy163
@jimmyboy163 2 года назад
Im leveled and was thinking about 1 1/2" spacers.......was there any rubbing issues on this ride??
@TWAMotorsports
@TWAMotorsports 2 года назад
No rubbing at all
@jimmyboy163
@jimmyboy163 2 года назад
@@TWAMotorsports thanks for the info!!
@TWAMotorsports
@TWAMotorsports 2 года назад
You're welcome
@jimmyboy163
@jimmyboy163 2 года назад
@@TWAMotorsports after leveling, I did get some larger tires than the stock, 265/70 17(?) I believe, so hopefully 1 1/2" spacers will still be OK. If not, I can do a return thru Amazon. Thanks
@imthatguy6129
@imthatguy6129 Год назад
What kinda of tires were those
@TWAMotorsports
@TWAMotorsports Год назад
Stock I think. Not my truck
@tylerf6528
@tylerf6528 2 года назад
What kind of dewalt is that
@TWAMotorsports
@TWAMotorsports 2 года назад
20 volt. Link in video description I think
@WethepeopleFreedom76
@WethepeopleFreedom76 Год назад
Was that a trail boss Silverado custom? It should already be level
@TWAMotorsports
@TWAMotorsports Год назад
No. Just a base level I believe
@Ncogswell12345
@Ncogswell12345 Год назад
What is the tire size on the truck?
@TWAMotorsports
@TWAMotorsports Год назад
Not sure. Isn't my truck
@Italianborn
@Italianborn Год назад
I bought a 22mm for the lug nut and while it goes on well it doesn’t get all the way in tho..it grabs only about half inch or less , is that normal ?
@TWAMotorsports
@TWAMotorsports Год назад
Doesn't sound normal
@Italianborn
@Italianborn Год назад
@@TWAMotorsports what do you use then 22 ? I’ll try with something different
@TWAMotorsports
@TWAMotorsports Год назад
Need longer one
@Italianborn
@Italianborn Год назад
@@TWAMotorsports it’s a deep socket 😂🤷‍♂️
@TWAMotorsports
@TWAMotorsports Год назад
Not sure then
@chuppoacobra
@chuppoacobra 10 месяцев назад
I very badly want to do a 3" RC kit on my '23 1500 LT, but I am pretty sure that this would void my extended warranty....:\
@TWAMotorsports
@TWAMotorsports 10 месяцев назад
Only on suspension parts
@chuppoacobra
@chuppoacobra 10 месяцев назад
@@TWAMotorsports Oh really? I didn't know this. I always thought that it was a blanket-type void when things like lifts/level kits are installed. I've never owned a new rig with a factory warranty like this before. I am mostly only concerned with my engine warranty, and not so much suspension related stuff. With the 2.7L 4 cylinder in my truck, I don't want that coverage to dissappear becuase I changed the suspension geometry. Thanks for the info.
@TWAMotorsports
@TWAMotorsports 10 месяцев назад
No they legally can't. Only things that could be affected by the lift
@rick-gn5kc
@rick-gn5kc 7 месяцев назад
Wouldn’t void your warranty at all just when you do take it to the dealership for a suspension problem they have to prove that the lift caused the problem which in most cases they can’t prove
@TWAMotorsports
@TWAMotorsports 7 месяцев назад
Correct, and they 100% will try to find a way not to cover it. Once had a friends warranty declined on window motor because of tint. Lol
@adamsalum9181
@adamsalum9181 2 года назад
That was stupid I'm my opinion...the lock tight on the Allen's bolt is just out of control. Someone is either going to strip it upon removal or break a bit...smh. redictulas. If anything, I would've used the locktight on the wheel spacers 😉
@TWAMotorsports
@TWAMotorsports 2 года назад
I agree but did what he wanted. I also said I wouldn't take it back apart for him. Lol
@shawnl7945
@shawnl7945 Месяц назад
Why would you go through all that work only to achieve those results? Hahahahahaha
@TWAMotorsports
@TWAMotorsports 29 дней назад
Isn't my truck
@shawnl7945
@shawnl7945 27 дней назад
@@TWAMotorsports That’s good news! Lol 😂
@codybersicc7939
@codybersicc7939 2 года назад
locktite smh the owner is nuts
@TWAMotorsports
@TWAMotorsports 2 года назад
I know
@JG2HTT
@JG2HTT 2 года назад
Chevrolet is way behind everyone when it comes to sporty looking trucks. Ford leads the as hard as it is for me to say that being a die hard Chevy guy.
@TWAMotorsports
@TWAMotorsports 2 года назад
I feel that way about the interiors too
@joshtaylor1416
@joshtaylor1416 2 года назад
Why would you lower a truck? lol
@TWAMotorsports
@TWAMotorsports 2 года назад
Looks better, easier to get in and out of, better gas mileage
@joshtaylor1416
@joshtaylor1416 2 года назад
@@TWAMotorsports get a car then. 😂
@TWAMotorsports
@TWAMotorsports 2 года назад
Everyone likes something different. If we all had the same tatse it would be a boring world.
@JG2HTT
@JG2HTT 2 года назад
I AM NOT A FAN OF HIGH TRUCK BODIES OVER THE TIRES. I PEFER THE LOW LOOK.
@TWAMotorsports
@TWAMotorsports 2 года назад
Me too.
@Mrniceguy959
@Mrniceguy959 7 месяцев назад
What tires are those
@TWAMotorsports
@TWAMotorsports 7 месяцев назад
No idea. Not mine
Далее
Whose action is better?🥹 #filaretiki #shorts
01:00
100 million nasib qilsin
00:18
Просмотров 514 тыс.
(How to) HyperDip/Plasti Dip Your Emblems
16:22
Просмотров 872 тыс.
Truck Stance Options that You Can SEE!
11:34
Просмотров 900 тыс.
21 Amazon Mods and Accessories for you Truck
30:38
Просмотров 46 тыс.
МОТ до 100 000₽ 😈
0:19
Просмотров 493 тыс.