Leveling, Squaring, and Tramming My Avid 4848 Pro CNC
More down here ↓↓↓ Click MORE!
In this video, I’ll show you how I leveled, squared, and finally trammed the spindle on my new Avid CNC 4848 Pro CNC Router! First I’ll show you how I leveled the frame. I’ll then show you how I sealed the MDO table top. Then I’ll show you how I squared up the gantry. And then I’ll walk you through the steps I took to tram the spindle to remove nod and tilt.
Finally, I’ll surface a piece of exterior grade MDF to see how good of a job I did.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, September 4th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: • Live Q&A #156 - Leveli...
Link to Avid CNC’s instructions on Leveling, Squaring, and Tramming: www.avidcnc.co...
Link to Ben Carlson's ER20 Dial Indicator Mount on Thingiverse: www.thingivers...
Link to Triton Dial Indicator: amzn.to/2zY78mU
Link to Grade B Granite Surface Plate: amzn.to/3Qm1m5z
Link to Edge Technologies Pro Tram System: amzn.to/3QaUS9g
Link to Edge Technologies Mini Pro Tram System: amzn.to/3FZvONj
Link to Amana RC-2255 2.5 inch diameter Surfacing Bit: amzn.to/3TAxyEK
Link to ETork C1200, 40 - 200 in lb torque wrench: amzn.to/3CX4j9j
Link to One Guy in a Shop Etsy Store for info on the dust shoe I use: www.etsy.com/s...
Link to Blue Line Wood Flags RU-vid video that describes the dust hose bracket, including info on how you can download the STL files to print your own: • Light up your CNC with...
Link to Roseburg Armorite Exterior Grade MDF web page to order samples: www.roseburg.c...
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/Mark...
Direct link to more information on becoming a Channel Member: / @marklindsaycnc
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc....
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
RU-vid: / @trampledunderfootpodcast
Facebook Page: / trampledunderfootpodcast
Past Episodes available at our website: trampledunderf...
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
For more info, or to configure an Avid CNC of your own, visit their website: www.avidcnc.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #cncrouter
14 окт 2024