Fab up a bracket to hang the vertical mounted hydraulic tank. Also make a slight modification to the sorting table. Created by InShot:inshotapp.page...
Mike loving the Ebel's hat as I know the place well, great place to get good meats and jerky supplies.look like the splitter build is coming along just fine..great job on the fab work
Hi Dave! Ebel’s is a great place for all that and a great source for anything Husky! I really appreciate you watching and supporting the channel. Take care my friend! WST
Black lines, White lines, Clothes lines- I’m of the belief ALL lines matter! Mike, laugh out loud funny, you showed the mathematical equation. “ Wife-where’s dad? He’s out in the shop Frenching! Good stuff fella, Have a good weekend
Hey other Mike! All lines matter 🤣 glad you enjoyed the vid and the very real quantum physics equation. I however had nothing to do with it. That frenching thing came out of left field. It came out of my mouth and I rolled with it. Can’t wait for the wife to read this comment 🤣 Thanks for watching as always. Take care! WST
Hey Mike! Glad you enjoy the overstated math and figuring. If you are any good at puzzles, then this work is for you. I once put a square peg in a round hole…. It’s been all downhill from there. Thanks for watching my friend! WST
Hey FM! Can you send me a sample swatch of that color? I have not clue what or why I would paint it that. Appreciate you watching and being a foundation supporter of WST. Take care, brother
Hey Gringo! If you can show me how not to stay busy, I would welcome it. Work is just a little nuts right now and requires a lot of me. Trust me, I would rather be entertaining you! Thanks for watching my friend! WST
Hi John! Thanks for stopping by my friend! Work always gets in the way for everyone. I just hate when it gets in the way of the channel. The build is coming along and we will see you next week! WST
Hi Clint! Glad you are enjoying the series. The more you see, the more I get done and closer to using the beast! Take care and we will see you on the next one! WST
Hey Chris! Nice to hear from you. Haven’t had much time of late. I cannot wait until it is done either. Much rather use it than wrench in it. Take care my friend! WST
Hey Cajun! It’s a great winter project. When you put this on video, people think I’m doing 15 minutes of work. I wish!! Squaring things up and making sure things are tight take time. All things you know. Thanks for watching my friend! WST
Slowly but surely coming along. Family and work definitely comes 1st., us here that are part of your RU-vid family well we understand we are 3rd in line..🤣👍
Hi Daniel! Slowly. Keyword. I would love to do a 4 days on the splitter build to help knock this out. Still, taking my time and making it right. Thanks for watching! WST
Wood splitter is coming along great. I always enjoy the humor in your videos. I assume you have a color picked out to paint it...could it possibly be stihl orange??? 😂😂😂 enjoying the splitter build videos, see ya on the next one Mike 👍👍
Hi Bryan! Making progress for sure. Glad you are entertained and like the content. As for the color, not sure what Stihl orange looks like….. so it won’t be that 🤣 Thanks for watching as always. We appreciate it! WST
Hey Heinzie! You sure hit the mail on the head! Priority is never what you want it to be. Still, it is moving a long and I’m happy where it is going. Thanks for watching my friend! WST
Hey Phil! I appreciate the kind words and I completely agree on the miss cut deal. Steel is through the roof and measure 6 dimes before I five that stuff. Thanks for watching and for the great comment. I appreciate it! WST
WST! What a splitter that’s going to be!! Wow. Something you need to be prepared for… People are going to come from miles around with trucks full of rounds for the chance to use that beast of a splitter!! You might consider a sign up list🤣🤣👍🏻👍🏻🐿
TOA, TOA, TOA! I agree it is going to be a splitter. That is what I set out to build. As for the rest of the fairytale you’re trying sell me…. I think you should write children’s books. You would be phenomenal at it! I appreciate the kind words and for watching as always. WST
Hey LTD! I hope so brother. I really hope so. Hey. I heard you have a channel? I searched for it and could not find it. Could you send me a link. Would love to support you. Thanks for watching and please take care! WST
@@WSTMike trying to get RU-vid to let me back,in my channel…..when I moved the email I had RU-vid under was deleted, I had not even thought about that being a problem. Well long story short, they won’t change it unless I answer their email response, which yep…..you guessed it, they send to that deleted email address. So, no for now, I have no workable channel. Plus I am an old guy with no tech savvy or video abilities other then just post as it happens….don’t know how to edit. Sorry for the long drawn answer……appreciate that you would support me! One day when fixed, I’ll holler 👍👍 keep up your great channel 👏
@@Living-The-Dream I Like long answers. Sorry to hear about the issues. RU-vid is very matter a fact about it’s processes. When they let you back in, holla at me! Take care brother! WST
Hi Mike! Super annoying! If I could do this for a living and work under someone and get to that point… I wouldn’t mind annoying people. Until that happens, there is no fear of annoyance. Thanks for watching! WST
Hi Bill! I’m glad you’ll be here next time. I could use the help 🤣 Planning is key. Would you believe I dream about this build? I’m planning when I’m sleeping!!! Take care my friend. WST
Looking good buddy. When you go to put that tank on final assembly, set a block on the fender to set the tank on rather than trying to hold tank and put bolts in at the same time. I'm a solo project worker quite frequently as well. Wish I had four hands on my body many times I doing projects. Loving the progress!
Hey Tim! I was going to grab a 2x6, but…. I didn’t. I would love 4 hands. Let’s me know when you get the heads up on that. Appreciate you watching and we will see you on the next one. WST
Hey B&F Crew! You are more than welcome for the videos. If you weren’t OK with them, you wouldn’t get anything! 🤣 Take care and see you on your channel soon. WST
WST, your splitter is coming along very nicely! Well thought of and a great project to be doing when you cannot be cutting, splitting, or stacking firewood!
Hi Craig! I agree that this is a great project to get done when the weather is not cooperative. Without this splitter, I’m stuck anyway. I just need to get her done and set things right in my firewood universe. Cannot wait! Thanks for watching! WST
True dat my friend! Are you going to the Midwest Firewood Frenzy by chance? I’m going to make my first appearance this year. Would love to meet you. Take care!
@@WSTMike, yes i am planning on going. We only have 3 people in my department so im going to ask off work soon as i can. I have the time to take off, just dont know how busy it will be. My birthday is 4 days after the MWFF so i thought why not spend it with some woodhounds of the world.
Really coming along great!! I’m with you, can never filter oil enough!!! Especially working in a dirty and dusty environment. Thanks for sharing Mike!! BTW- Frenching in high school had nothing to do with shop class for me either. 😉😉
Pete, is that you.....again? Filter, filter, filter. You have to keep the fluid clean to prolong life to the controls, pump and cylinders. Frenching absolutely had nothing to do with shop class. 🤣🤣🤣
@@peteschiavoni you ain’t kidding! I am super humble that you would watch our channel. We appreciate it. I haven’t posted anything for awhile now due to work. I travel for my job and with COVID not as much of an issue anymore, things are open and I have to travel. Hope to get back to it soon and put up more quality content. Thanks again for the support!
The splitter is coming along great mike. 2 sets of hands is always better than 1. Also i had never heard of the prefilter, on my splitter there is only 1 filter on it
WD30! Whassup!! The build is coming along. As for the pre filter. Maybe a slip of words. The filter will be prior to the tank, like any other splitter. Sorry for the confusion. Hope all is well my friend! WST
Can’t wait to see this finished. I suppose your gonna wait till you pass me in subs before you come out with another video? Ha! If that’s the case, maybe a video in a couple weeks!😬
Putting the finishing touches on it. Hope to have a video out soon. As for the subs, you are comfortably ahead of me. I can’t even see your taillights. See you soon!
Hi Anthony! Yep!!!!! It never goes as fast as you would like. I just want to make firewood and have a lot waiting on the splitter. Still, I’m biting the bit to make sure I get this right. It has to be right. Thanks for watching my friend! WST
