Тёмный

Make UR mini bike FASTER! Free performance build mods for coleman bikes rb100 cc100x ct100u rt100 

me going fast
Подписаться 15 тыс.
Просмотров 51 тыс.
50% 1

How to make your coleman rb100, cc100x, ct100u, RT100 (and OTHERS) minibikes FASTER, mostly for free performance mods! This is the RB100 and works for the cc100x and ct100u minibikes as well. These performance build mods actually work for most all size engines, but I showed it on a small engine instead of a predator 212cc because most people just discard these engines. So, for $20 you can give your engine a boost, an intake upgrade that you can use if you want more for a larger performance engine swap still!
Coleman RB100 mini bike top speed is 22 mph.
Coleman RT100 mini bike top speed is 22 mph. The Coleman RT100 mini bike is the same as the RB100 with a different color.
BUT I take you step by step on increasing speed and power for your small engine without swapping to a predator 212cc engine straight off. For $20 you can add a bit of boost to your engine. For 25-39 more you can add an air intake that is reusable for many other larger engines as well. You don't even need a performance kit for this, mostly just some drill bits.
Air filter and adapter
amzn.to/3lkdtky

Хобби

Опубликовано:

 

22 окт 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 94   
@srcobra50
@srcobra50 3 года назад
Nice work bro, that engine was pretty impressive out of the box imo. It was moving you pretty good for “1.77” hp. Never seen that copper washer trick before iether. Real nice! Keep it up
@stinkyvonfishstix4196
@stinkyvonfishstix4196 2 года назад
I hope you don't stop making videos, they're very entertaining!
@S_fanboy
@S_fanboy 3 года назад
I was looking how to make my mini bike faster and this helped a lot thanks!!
@andrelit5917
@andrelit5917 3 года назад
i got the rb100 yesterday and i love it
@GoKartsorGoneFishin
@GoKartsorGoneFishin 3 года назад
That's very impressive for that lil motor...well done!
@RAWRMotorsports
@RAWRMotorsports 3 года назад
Best video I've seen like this 👏
@OffbeatJoe
@OffbeatJoe 2 года назад
No wonder why I've been having trouble finding my engine! It was right here. The RT100 is the "Real Tree" edition of the RB100 which makes it a bit more difficult to find videos on but this has literally everything besides maintenance I needed. You got a sub sir. I'll try not to blow the engine.
@megoingfast
@megoingfast 2 года назад
Some people found it helpful to put in a new idle/low speed jet. I find the stock size for predator carbs works great.
@OffbeatJoe
@OffbeatJoe 2 года назад
@@megoingfast thank you for the reply I'll look into it!
@xawfx
@xawfx 3 месяца назад
Thank god i finally found a helpful video, just got a minibike with a similar engine, thank you
@thenexthobby
@thenexthobby 3 года назад
I like the suggestion of picking up a set of metric copper sealing washers. I can see slipping that in at the next valve lash verification on my 196.
@cuttnhorse2013
@cuttnhorse2013 2 года назад
Thanks for the get video! I’m 68, old school street racer, but no nothing about these small engines. We just got a Coleman 105 last night out of the box. Put it together, serviced it. Started it, and it had a fine rattle around the pull rope area,seemed like? Any ideas. Haven’t gave it to him yet. Can’t stand not knowing what the fine rattle is. Thanks again, Ronnie, East Tennessee
@GPMAX01
@GPMAX01 3 года назад
Could we use the 18lb valve springs from a 79cc predator in place of the copper washers for the valves? How do you think this engine would do with a Series 30 CVT /Green spring and 14/15 front sprocket? What would you suggest for rear sprocket?
@eduardosantiago9227
@eduardosantiago9227 2 года назад
Best intro ever
@bravethewildgaming8139
@bravethewildgaming8139 3 года назад
Diggin the duck tape instrument cluster lol! Nooiiiice!
@niggaswildin8431
@niggaswildin8431 Год назад
Hey how much louder is the muffler once drilled?
@kennyanstey44
@kennyanstey44 9 месяцев назад
Great stuff here thank you! Do you have any content for a torque converter on a smaller 97/105cc engine?
@Ace-vc2to
@Ace-vc2to 3 года назад
I have a Colemanct100u minibike and so far I changed The front and back Metal fenders to plastic also the metal that holds the chain guard on i cut that off for less metal Also for in the future just in case I want to go bigger with the engineI i took the gas tank off I have a plastic gas tank now I put a straight pipe and filter kit that’s in the video I broke the screw off that slows it down from going fast I have a 65t aftermarket sprocket I change the way the throttle cable was hooked up and modified it so my throttle goes directly to the governor next im going to port the head put stronger springs and port out for more airflow for the Exhaust
@zachstephens4927
@zachstephens4927 2 года назад
That air filter that is in your description will it work on a stock engine??
@Spacecruizer203
@Spacecruizer203 3 года назад
im running a stock motovox 80cc gov removed over 3k miles rusted flywheel an magnet still hits 4o mph i wanna try that spring spacer thing alreasy got a header on her an then i have my DuCar212 on standby
@Grey_Beard72
@Grey_Beard72 2 месяца назад
I seriously question that RB105. I have the actual Monster Moto 105 and it was doing 29mph right out of the box, with throttle screw removed. I bypassed the governor and can reach 36mph by my GPS app. I also weigh 230 pounds.
@samsgarage1716
@samsgarage1716 3 года назад
Great job you got an extra 10 mph with just 20 bucks.I like the way you explain things.The copper washers are great.Do you think I can use copper washers for my 212 hemi engine?Or should I just buy better value springs.The new project is great.
@megoingfast
@megoingfast 3 года назад
Thanks! Depends what you're doing to the engine. I've used shims with 22lb springs in the 9000 rpm budget build, but honestly those stock predator springs rate all over the place from 12-17. Shims will help for stage 1, but only depending on where the springs are at now. Just the cheap way to get a little extra out of them for low performance mods.
@Hay_Fever
@Hay_Fever 9 дней назад
What forks did you use?
@datvitoforensrcle5334
@datvitoforensrcle5334 3 года назад
I need help bro what type jackshaft i.need to.get for rt 200
@moay3750
@moay3750 Год назад
What kind of speedometer do you use
@red-neckrigs9069
@red-neckrigs9069 2 года назад
Bro i engine swapped a mini bike and messed up the throttle linkage so i just hooked it up to my brakes
@justino8242
@justino8242 3 года назад
Hi. Great videos. Nicely narrated. I'm considering these mods for my RB100. What's the reason for keeping the throttle cable connected to the control panel lever and using the governor spring and governor arm to open the carburetor butterfly? Wouldn't there be a benefit of attaching the throttle cable directly to the carburetor butterfly lever? Maybe more precise throttle control?
@megoingfast
@megoingfast 3 года назад
Benefit is ease to complete for this engine. That's all.
@justino8242
@justino8242 3 года назад
@@megoingfast Thank you. That's appreciated! Keep up the good work.
@TheMak3itreign
@TheMak3itreign 3 года назад
Sorry do you know of any aftermarket exhaust that can devert fuels under seat and quite it down some?
@megoingfast
@megoingfast 3 года назад
There are "weenie pipes" made that are a similar fit you can modify to work, but hard to come by for the direction you're looking for. The "weenie pipe" has a muffler on a header.
@kaiyan299
@kaiyan299 3 года назад
That's fast
@froggersgarage5127
@froggersgarage5127 3 года назад
Great info I wanted to do this with my db30 but I put a coleman 196 on it
@megoingfast
@megoingfast 3 года назад
Yeah, lots of people throwing out those little engines. Some of them you can get up to 5-6hp without much money. Can use the same tricks on the larger engines as well. People used to drill mufflers in high school all the time for their cars.
@froggersgarage5127
@froggersgarage5127 3 года назад
@@megoingfast my plan was make a header out of scrap pipe and govner delete that's usually all I ever do I know it's probably lean but I don't mind 😂😂
@noahkruetzkamp7122
@noahkruetzkamp7122 3 года назад
I topped mine out at 49 with a stock engine with a high flow air filter and clutch. Has like to torque though
@GoodFellasMiniBikez-GFMB
@GoodFellasMiniBikez-GFMB 2 года назад
did u put a max torque clutch ?
@noahkruetzkamp7122
@noahkruetzkamp7122 2 года назад
@@GoodFellasMiniBikez-GFMB no
@roninlapierre4028
@roninlapierre4028 2 года назад
put a torque converter on it and you will have tons of torque
@bricks8979
@bricks8979 2 года назад
was is a colman 200u or the smaller one
@trailseeker7448
@trailseeker7448 Год назад
Hit 53 on mine pretty sketch
@gregsteele9002
@gregsteele9002 2 года назад
I put a paperclip on the spring that goes from the top of the governor arm to the carb throttle so it wont pull back (on the small Coleman's, Motovox, & monster moto) and it goes about 36. You could also use small wire even zipties
@843carmine6
@843carmine6 11 месяцев назад
This wears out motor though right ?
@MoodyyVFX
@MoodyyVFX 3 года назад
Can you do a tutorial of how to get the air filter out and clean it
@megoingfast
@megoingfast 3 года назад
Pull the bottom of the air box up and towards the back to unsnap it. Pull the foam pad out. Squash it a few times under warm clean water. Let it dry and put it back in. Don't use soap.
@MoodyyVFX
@MoodyyVFX 3 года назад
@@megoingfast Thank you
@ProToolReview
@ProToolReview 3 года назад
Mine wont start after doing all this. Should I set the valve clearance after installing copper washers? I didnt readjust the valves because they were screwed all the way down already. Looked pretty loose though
@megoingfast
@megoingfast 3 года назад
Yes, need to readjust valve clearance to .003. also, depending on fuel used you may need to increase the pilot/low speed jet size to draw in fuel to help starting.
@ProToolReview
@ProToolReview 3 года назад
@@megoingfast Running now, thanks. Little boggy, but I am waiting in new exhaust and carb.
@megoingfast
@megoingfast 3 года назад
@@ProToolReview new carb will still need high and low speed jets adjusted for it. The predator 212cc engine low speed jet is the perfect size for 91 octane.
@kevinjohnson9372
@kevinjohnson9372 2 года назад
Coul u do that same engine with a slight compression bump and timeing advanced key. Port the head while u have it off.
@megoingfast
@megoingfast 2 года назад
The RPM limit with the timing advance will be close to critical with that flywheel. Unknown pressure for the rod. The flywheel can take the level it's at due to it being smaller diameter but spinning it a couple k faster is unknown tolerance.
@sivphuingan5506
@sivphuingan5506 3 года назад
What is the top speed if you remove the throttle stop screw? you mentioned 22 out of the box.
@megoingfast
@megoingfast 3 года назад
25 mph for a 185+ lb person.
@sivphuingan5506
@sivphuingan5506 3 года назад
So removing the governor gets you close to 33 mph?
@charlestwietmeyer8975
@charlestwietmeyer8975 2 года назад
I drilled a 1/2 hole in the muffler like you showed, but now it won't idle. Is there a way to adjust the stock carb to help this?
@megoingfast
@megoingfast 2 года назад
The jet information in the video can be used for the stock carb. Drill as specified in the video, absolutely needed. Then, if you need idle help, the stock predator idle/low speed jet will fit in the stock carb and is a good size upgrade.
@CarterTwoWheels
@CarterTwoWheels 2 года назад
@@megoingfast hopefully not too late. Help me out here. My rt100 carb only has a brain bold on the bowl. Not a removable bolt centered on bottom. Can't take off. Recommendation with stock carb?
@donthatecauseismashedyamot1204
@donthatecauseismashedyamot1204 3 года назад
I have a 196cc engine. And I'm getting a stage 1 kit
@tristan3479
@tristan3479 3 года назад
But what if the throttle stop screw is wielded on there?
@megoingfast
@megoingfast 3 года назад
Great question! I use a drill bit to remove the screw head, then put a different screw on there!
@Henry14141
@Henry14141 3 года назад
After these mods do you think this bike would be decent for offroading? I'm about 140lbs and interested in this bike
@megoingfast
@megoingfast 3 года назад
Better than it was. Torque went up highly. For hill climbs still a little weak, but better than it was. Also, these mods can pertain to near any engine.
@Dingbobber
@Dingbobber 2 года назад
Get a 212, that’ll be beefier for off-roading
@kevinjohnson9372
@kevinjohnson9372 2 года назад
I have a cc100x had 98 cc 3 horse looks like a 79cc predator.
@TheTechCatalyst
@TheTechCatalyst 3 года назад
Cool stuff. A little difficult to hear with the helmet to be honest.
@megoingfast
@megoingfast 3 года назад
Least echo of all my microphones.
@moay3750
@moay3750 Год назад
Can you engine swap the engine with a 212 predator
@megoingfast
@megoingfast Год назад
yes, but it will take a little work for a couple of the frames. Don't cut the frame, there are ways to alter how the engine sits, and different air intake and exhaust are needed.
@saddan0227
@saddan0227 2 года назад
How did you get the spark arrestor out? I cant get it out.
@megoingfast
@megoingfast 2 года назад
A pick similar to dental pick that has a hook. Twisted it hard and it ripped out.
@saddan0227
@saddan0227 2 года назад
@@megoingfast Thanks, I got it out.
@pancudowny
@pancudowny 2 года назад
To the OP: When are you gonna swap a dual-fuel carb on that 80-105cc, and hit 9000-rpm on propane? And then finally go for 10,000-rpm with a cam & header? ;)
@megoingfast
@megoingfast 2 года назад
When money is free ;)
@larellkoenig1119
@larellkoenig1119 3 года назад
Could you please give you the link to the carb?
@larellkoenig1119
@larellkoenig1119 3 года назад
Me**
@megoingfast
@megoingfast 3 года назад
That one is no longer available under the link I have. This one looks the exact same by image as the one I had bought : www.amazon.com/dp/B079NWSXLN
@bosskill3r746
@bosskill3r746 3 года назад
CAN i put a straigth pipe
@megoingfast
@megoingfast 3 года назад
Sure thing! You can add a lot of different mods. Cost goes up, potential to blow up if not upped on flywheel and piston rod goes up too. This was just a cheap way to get a lot out of an engine that most people would otherwise discard.
@nolinbronson4645
@nolinbronson4645 Год назад
Mine goes 42mph. I have the ct100u!
@bosskill3r746
@bosskill3r746 3 года назад
CAN you drive it in winter
@megoingfast
@megoingfast 3 года назад
I just rode it in the snow a couple weeks ago. I slid around a LOT in 6" of snow. The other bike I did the studded tires video I use primarily on snow and ice.
@penelopefocks9674
@penelopefocks9674 3 года назад
I tried to ride mine in about 8" fresh snow...... Immediately dumped it on it's side, (not being used to the twist throttle) I kinda forgot to let go, while doing the splits and spinning a 180°+ . It was HILARIOUS!!! 🤣 And now for my next trick!!! ✨ 🔮
@kaseygrumpykeller5867
@kaseygrumpykeller5867 3 года назад
What brand is the 105cc engine
@megoingfast
@megoingfast 3 года назад
Lifan
@kaseygrumpykeller5867
@kaseygrumpykeller5867 3 года назад
I thought so I have a 79cc lifan on my bicycle looking for a bigger engine thanks
@MoodyyVFX
@MoodyyVFX 3 года назад
When do I change the oil?
@megoingfast
@megoingfast 3 года назад
After an hour of use the first time. Then, about 30 hours or so ride time non synthetic. 50 for full synthetic. If you don't put that many hours on in a year than once or twice a year.
@MoodyyVFX
@MoodyyVFX 3 года назад
@@megoingfast oh so is that my problem
@talonaskelson9450
@talonaskelson9450 Год назад
35mph stock rb100 with governor screw gone
@prebaned
@prebaned 8 месяцев назад
Free cost money, who knew?
@XPFTP
@XPFTP Год назад
really a helmet.. cant watch iam out
Далее
Coleman RB100 10 MPH faster in two minutes!
8:18
Просмотров 41 тыс.
How To Make Your Coleman CT100U Minibike Faster!
11:16
Аминка ❤️
00:16
Просмотров 595 тыс.
Unlock Free Horsepower On Your Mini Bike Engine!!!
27:08
FAST Mini Bike Engine Swap!
16:36
Просмотров 2,2 млн
how to bypass the governor on a predator 212 engine
9:11
Free Predator 212 performance mods
18:49
Просмотров 71 тыс.
Mini Bike Gets Stage 2 Power Mods!
11:57
Просмотров 13 тыс.
The Secrets of Minibike Gearing
6:44
Просмотров 64 тыс.
RT100 minibike - Let's get it running!
26:33
Просмотров 3,1 тыс.
Predator 212 hemi vs non hemi harbor freight engine
9:24
Клавиатура для девушек
0:14
Просмотров 4,9 млн
Клавиатура для девушек
0:14
Просмотров 4,9 млн