Maximizing Garage Workshop Storage - Spray Paint and Chemical Cans

Подписаться 259 тыс.

Просмотров 121 тыс.

50% 1

Building the Ultimate Single Garage Workshop requires out-of-the-box thinking. Multi-functional organization and storage is how I hope to achieve this goal.
I considered an alternative storage method for spray paint and chemical cans in this video. Quick and unrestricted access to the stored cans was my focus with this design, so I went for a non-conventional storage approach.
Ultimate Tool Storage For Small Workshops - Plans!
thewoodworkersplans.com/produ...
Ultimate Tool Storage - Video!
• Ultimate DIY Tool Stor...
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

Хобби

Опубликовано:

23 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@richardrodgers1883 9 месяцев назад

Yes PLANS please. I think I could figure it out if I watch the video a couple more times, but the plans would be great to have.

@Not_TVs_Frank 9 месяцев назад

With a little modification, this design could use corner space. To me, corner space is usually a problem because of the limits on accessing it. A paint carousel in the corner sounds like a win-win.

@mariodesurra1443 9 месяцев назад

Best rattle can storage I’ve seen yet! Genius! Very small footprint and I love that it’s expandable!

@brucemitchell5637 9 месяцев назад

Always a good day when a new Workshop Junkies video shows up on my RU-vid feed!

@smashyrashy 9 месяцев назад

Never heard of him

@j14kworks46 3 месяца назад

Plans would make life easier----and we all need that

@melindaford5080 9 месяцев назад

You’ve got me hooked because you “think outside the box” with everything you make. It’s refreshing to have your new perspective on age-old storage problems. And yes, I would buy plans if you made them available.

@georgedennis2719 2 месяца назад

Love the project! I happen to be blessed with a huge shop space in my basement. Nevertheless, Boyle's law of gasses implies stuff will expand to occupy whatever space is available. Thus storage projects like this one are immensely important to preserve maximum working space for furniture pieces, doors etc. Gonna get the plans for sure. Thanks

@larrymoore5778 9 месяцев назад

Genius. I love that it is hanging on a French cleat. If you live in a colder climate ( and have an unheated workshop) you can easily move the whole unit inside to keep warm.

@richardrodgers1883 9 месяцев назад

Or if you live in a very Hot area (Think Arizona) and have an uncooled space you can take it inside to keep it cool. Believe me overheated spray cans can and do Explode if you try to shake them. Don't ask how I know that.😀

@rogerazevedo4094 4 месяца назад

Your comment has a tremendous impact on the climate change or the fridge temperature in my house.

@steveherrin3480 9 месяцев назад

I would like the plans for the lazy Susan can storage please, thank you. This is brilliant! Wish I had thought of this. I think I will go a few more layers for larger can storage as well! Thank you for your work

@corrystalcup8390 6 месяцев назад

I love the ingenuity on the things you build. Most of the things you build I'm just like, "that's really functional, but so cool too". Nice work.

@RiganoBuilding 6 месяцев назад

I think that will be my first favourite channel. I follow woodworking from 15 years and there are a lot of very good workers…. But that one is a very very nice master of idea! I love it!

@MrPatdeeee 9 месяцев назад

As always, OUR guy builds yet another awesome "Gem". Thank you kind Sir.❤

@Flippingdrawers 9 месяцев назад

Cool. Something to watch later today 👍

@WoodshopJunkies 9 месяцев назад

I hope you enjoy it!

@Flippingdrawers 9 месяцев назад

@@WoodshopJunkies I like all your videos 😉

@30guarino 9 месяцев назад

You basically made a curio cabinet for cans ....Nice job!....all you need now is to install some lights in it lol

@robt2151 9 месяцев назад

And a wi-fi link so that you can pre-select the can on a phone app

@berendbotje6629 8 месяцев назад

RGB FTW!😂

@Sebastopolmark 9 месяцев назад

As with all of your projects, this was very well thought out and the end result is a VERY functional "rattle" can storage round a bout! ! !!!

@colinroberts4892 9 месяцев назад

Great idea, Plans would be great. Love how you're updating what was already a great small garage workshop

@dpara9739 9 месяцев назад

Great project mate, would love to see some plans on this. Can’t wait to see what’s next

@woodworks2123 9 месяцев назад

Love your ingenuity mate, great project, simple but very clever and all done with tools we could all have, no space lasers or AI controlled cnc in sight. Approachable woodworking!

@RickBeck-cw8vy 8 месяцев назад

Yes I would like plans for this project

@ELCADAROSA 8 месяцев назад

Wonderful idea and tutorial! I can see one alteration to help keep dust out: 1. Make the top & bottom plates without the hand cutouts. 2. Mount a piano hinge from top to bottom on one side or the other of the front access. 3. Mount a plexiglass or thin plywood/hardboard door with handle to the hinge.

@jdstewart7802 9 месяцев назад

What a brilliant idea! Fairly simple, practical, functional, as attractive as one might hope for in a workshop, and well within the skill set of the average home duffer.. very well done indeed! 👍

@carlosvassel 2 месяца назад

Mi amigo, la verdad que cuando ví las cosas que haces...quedé impactado !!! Son geniales, gracias por compartir

@themightylemor 9 месяцев назад

For an OCD hobbyist/organizer like myself, your videos are a MUST when watch whenever they come out! This video is awesome! I can finally get rid of that ugly, cheap metal cabinet containing all my paint/stain cans.

@MCsCreations 9 месяцев назад

Brilliant work, Jean! Really well done! 😃 Stay safe there with your family! 🖖😊

@user-ie8zx7rx6g 2 месяца назад

Day 2 of demanding plans for this amazing piece of art.

@williamdoyle649 9 месяцев назад

I love the rattle can storage!Very well thought out!

@mjremy2605 4 месяца назад

Fabulous! What an enviable degree of paint organization! Love it! Your garage is looking so good now. Learning a lot from you, thank you!!

@randogame4438 9 месяцев назад

The solutions you come up with for compact storage always amaze me. Great Vid!

@MakewithMatt 9 месяцев назад

This is so cool. I love everything about it. More complicated than I would chose to build but I must say this is super slick and was a load of fun to watch! Can’t wait for your next creation! Cheers

@user-lz7qd4rg4b 9 месяцев назад

I love this design and can think of other uses for this project. Thanks for the video!❤😊

@kennyshipman7136 9 месяцев назад

Excellent storage idea. Thanks for sharing

@mandyleeson1 9 месяцев назад

Superb design.👏🏼

@darkmyble2006 9 месяцев назад

This is neat and functional.. Deffo a must for smaller workshops!

@FintaruS 8 месяцев назад

You make so many amazing things for a small workshop, how can I not want the plans for this one too. Yes please.

@crossgrainwoodproductsltd9230 7 месяцев назад

Brilliant! Never overdone. This design will keep the dust and debre out for the most part with maybe an annual vacuuming. I also have a tiny,10' x 16' shop and this design has a very small footprint. My only issue which only applies to those who experience winter and do not keep their shops heated when not in there. I would have to remove the unit as I do with glues and bring them inside a heated space. My shop is has its own 200amp service, fully insulated and takes less than 30 minutes on a below freezing day, to get the temp up to 60 which for me is perfect. That is with one space heater. With the mini Woodstock it will get hot in 30 minutes and only use it on very cold days

@johnwaugh2489 9 месяцев назад

Great yes i will deffo be buying the plans for this thank you

@howardbecdove9780 8 месяцев назад

Fantastic idea. Yes, I would buy plans. Thanks for sharing mate.

@martinsvensson6884 9 месяцев назад

Really smart solution.

@DennyMK007 8 месяцев назад

Aside from plexiglass limiting the access significantly, this is something I will be doing for my can storage. Well done and very space saving project.

@chrisnorton2837 5 месяцев назад

Could always put hinges on the plexiglass...

@gregmccormack5709 9 месяцев назад

That's dope! very nice build👍🏻

@installer1571 9 месяцев назад

I love it. It is fantastic.

@heamodehar5907 9 месяцев назад

Amazing work once again. I love all your videos and small projects. Please can we have the plans for this project?

@TheBillPayingHobbyists 7 месяцев назад

As always, great ideas. Please keep them coming. Great video

@user-dz6uj3bc4d 9 месяцев назад

Amazing work 👏

@user-oe8gj7fz6v 9 месяцев назад

Good build👍. Thank you!!

@danh6746 9 месяцев назад

Thanks for the great video!

@garymilner7799 9 месяцев назад

Lovely work Sir!!

@danielblakey8442 9 месяцев назад

Thats really mint work and really excellent and it's better then the other one what you made before nice one mate and I love the wood work u do😊🎉

@peternell1501 3 месяца назад

Super idea.

@faroukdesai4414 9 месяцев назад

Excellent presentation 👏

@larsonbennett5903 9 месяцев назад

Very nice work.

@mattdavis7291 9 месяцев назад

Nicely done sir!

@MASI_forging 9 месяцев назад

Brilliant work. This is so cool 👏👏

@davidcrocombe1322 7 месяцев назад

You only need a single hole, not 4 for connecting the 2nd side of the “Lazy Susan”. Just rotate after putting in a screw to be able to put the next screw in.

@elsdp-4560 8 месяцев назад

Thank you for sharing. Very nice👍

@cernunnoskali 9 месяцев назад

That was so satisfying watching you put the cans away haha

@robandsharonseddon-smith5216 9 месяцев назад

Very cool.

@stephensimpson5283 9 месяцев назад

Great idea!

@keithdenner9441 9 месяцев назад

Great work!

@tonyhartanto2852 5 месяцев назад

wow awesome

@HobbyGarageDIY 8 месяцев назад

fantastic! 😍

@mikemazzeo3758 8 месяцев назад

Plans yes!!

@stefanleijon9637 9 месяцев назад

Nice one mate! Really good idea!

@bradleytuckwell4881 9 месяцев назад

Very nice

@batistausher4890 9 месяцев назад

very clever

@hagar69416 9 месяцев назад

Great idea as usual. Enjoy your content very much, as I only have a small workspace. I will be waiting on the plans to pop up in the TWP shop. Cheers 🇦🇺

@stephencleary2231 9 месяцев назад

that's awesome

@sheldon2092 6 месяцев назад

Love this spray can / glue storage unit...I would love to have plans for this!

@dukecanell707 8 месяцев назад

Great storage idea. Don’t need the plans, I can just wing it. NOT!! I would love to get the detailed plans on this build. As a DIYer these type of projects are right up my alley. Challenging but doable. Thanks for the Vid

@allisteropenshaw6023 9 месяцев назад

Awesome build. Plexiglass I think I'd a good idea. Keeps dust out and just finishes off the project.

@c.harris7823 8 месяцев назад

Fantastic idea! Great video. 👍🏼👍🏼 I would definitely buy plans for this.

@soulkalastudio 8 месяцев назад

I'd like to make this but as a spice rack instead. Thanks for the Video. Another amazing project as usual.

@themplar 9 месяцев назад

You had me all over the place. from this is stupid to this is actually really nice to wow. Very nice build, loved to see the skills. The space is a lot less then i expected. Not sold on the plexy glass, because i know i will hit/scrape it with my hand. But it looks stellar.

@bamsebrumbamsebrumen5403 9 месяцев назад

Nice, -and hangs on the cleat system too👍 Personally I would have tried a roof shelf, but the way things always fall down around me means having to wear a helmet in the workshop😇

@onsapplikasies8620 9 месяцев назад

Genius

@berendbotje6629 8 месяцев назад

Cool.Could serve as a cool corner fill-up as well with some modeifications (just like the kitchen carousels)

@jeanloreaud9282 9 месяцев назад

Belle réalisation,bien étudiée et très bien réalisée, bravo, à bientôt salut Jeannot ⚒😉

@chrissteinike4379 9 месяцев назад

This awesome. Great work. I would love plans for this project.

@rogergladding7943 9 месяцев назад

Great idea! One thing if you left a gap in each layer of storage like the gap in the base you would save a lot of height and only lose one can space.

@yunseiprod 9 месяцев назад

I feel like the plexy glass obstructs the ergonomics of spinning the cans, the side planks are ok but the glass made you spin the cans a bit more cautiously

@rta3738 9 месяцев назад

If you’re like me and spray paint, might as well start building the extension now!

@brucelee3388 9 месяцев назад

There is a slightly less complicated way to put the Lazy Susan bearing in place. You mark out the 90 degrees lines as you did, then a circle passing thru the place where the screws will go. On ONE piece drill a larger hole that your screw driver will easily fit thru on the circle offset 45 degrees from the rest of the places the screws are going to go. Now screw the Lazy Susan to the piece with the extra hole - regular wood screws, countersunk or pan head, not bolts with nuts and washers. Turn that assembly over and rotate the bearing so you can see an empty hole in the Lazy Susan thru the larger hole, place the assembly so the empty hole lines up with the mark for the screw, fix the screw in place thru the hole, rotate and repeat for the remaining 3 screws. No nuts to come loose with this method. I've seen this as the 'normal' way to install a Lazy Susan in publications like Fine Woodworking, Woodsmith/Shop Notes and Popular Woodworking as well as numerous DIY books.

@fixittony 8 месяцев назад

Very nice! I will get a copy of the plans...I may want to try making mine out of oak or something to just for looks...Either way, brilliant!

@davidpeters8813 8 месяцев назад

This is a great project and I like being able to see all the products. It also takes up less space than my current solution. Plans would be great!

@davidpeters8813 7 месяцев назад

bought the plans tonight - thank you very much!

@Andy.H.H. 9 месяцев назад

Looks great! I think I'd forget the plexiglass panels though.

@christokellerman39 9 месяцев назад

Well done. Ek like hoe jy dink en geniet jou videos. Hou so aan yster.

@dwm009 9 месяцев назад

This really puts the cardboard box I use to shame!!

@zapa1pnt 9 месяцев назад

I'm using two drawers, in a file cabinet. (Which I need to get rid of.) 😁✌🖖

@snowman8052 9 месяцев назад

Nice. But I wouldn’t have added the plexiglass, it seems way less convenient.

@robt2151 9 месяцев назад

Probably helps to keep the dust out.

@Carpenter_N 8 месяцев назад

Great ❤❤❤

@timprince731 8 месяцев назад

Brilliant! I’d like the plans please

@HaegrTheMighty 8 месяцев назад

Absolutely awesome design but honestly I'd have skipped the acrylic - I think it would just make it more difficult to grab stuff out of the rack and doesn't really add anything.

@kpmathis71 9 месяцев назад

The plexiglass allows sight, but why narrow your reach-in ability? I'm not sure if I have this many cans, which makes me think I need something like this! 🤔 Cool build. Thanks for sharing!

@shawnr771 9 месяцев назад

Outstanding work as usual. In my opinion the plexiglass is overkill. Limits the direction of the hand entering and leaving the cabinet. I would hit it with my knuckles far too often.

@zapa1pnt 9 месяцев назад

If you reach in, with your hand horizontal (like flat on a table) you can grasp the cans/bottles from the top, without banging anything. 😁✌🖖

@steveherrin3480 9 месяцев назад

Make the opening larger! I have huge hands! I have to modify it to fit my size hands

@shawnr771 9 месяцев назад

@@zapa1pnt That would require retraining on my part.

@zapa1pnt 9 месяцев назад

@@shawnr771: Well then, you can make the plexi panels narrower, making the opening wider, Or leave the panels off.

@shawnr771 9 месяцев назад

@@zapa1pnt Yes I would leave the panels off. Looks cool. Does not really add to the functionality for me. I liked the older version that folded out. Although I am personally partial to a shelf. I keep paints and other sprayables separated. Paint, Mechanical Lubricants, Insect repellants etc.

@PJPerron_me 9 месяцев назад

would love the plans.

@rogerazevedo4094 4 месяца назад

Very nice project well thought but for safety reasons chemicals should only be stored in an enclosed cabinet

@c.a.g.1977 8 месяцев назад

Very well thought out idea, Jean! Nothing worse than having to shuffle around lots of bottles and cans to get to that one can in the back! Not sure if adding the plexiglass would be a good idea for me, I'd probable have it all scratched up in no time...