2014-2021 Mazda 2.5L Water Pump and How To Bleed Coolant

Подписаться 1,7 тыс.

Просмотров 8 тыс.

50% 1

Today we are replacing the water pump on a 2017 Mazda6 with the 2.5L Skyactiv 4 cylinder engine. This procedure applies to the 2.5L Skyactiv engines in 2014 -2021 Mazda6 and many others with the 2.5 engine. Easy follow along DIY instructions including the factory coolant bleeding procedure if you are replacing anything coolant related such as your radiator, hoses, etc. on your Mazda 6
Mazda OEM Parts
Water Pump : PEDD-15-010A
Water Pipe O-Ring : PE01-15-287
Product Links
Spill Proof Funnel Kit : amzn.to/43iPWGM
Hook Tool Set : amzn.to/3r2Jm9x
PEAK OET Green Coolant Full Concentrate : amzn.to/3qOGxZO
PEAK OET Green Coolant 50/50 : amzn.to/3L7ZMnL
Latex Gloves : amzn.to/3J58YbI
Starting Tool Set : amzn.to/3pDlpVI
JEGS Aluminum Floor Jack : amzn.to/3ErQoI5
Kobalt 1/2" Cordless Impact Wrench : amzn.to/3Z4TKtO
Kobalt 3/8" Cordless Impact Wrench : amzn.to/3Z4c729
Skyactiv-G Third Generation Mazda CX-5 Mazda3 CX-4 CX-9 CX-8 CX-30 CX-50 PY-VPS
2014 2015 2016 2018 2017 2019 2020 2021#mazda #mazda6 #diy #mechanic
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.

Авто/Мото

Опубликовано:

3 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@oskarkarrera 6 дней назад

That funnel part tho is were it helps bleed out the bubbles

@afonsocarneiro 7 месяцев назад

great tutorial, thanks

@CarsYouCanFix 7 месяцев назад

For sure! And thanks for the Subscribe!

@Drag596 Месяц назад

You should bleed it with funnel still on. That is the purpose of that deep funnel to hold extra coolant for purpose of bleeding the system and preventing air back in the system.

@CarsYouCanFix Месяц назад

The manufacturer bleeding procedure on this car is what I was showing here, with the cap on. There are probably a few ways to do the bleeding on this vehicle, but I wanted to follow Mazda procedure.

@Drag596 Месяц назад

@@CarsYouCanFix 👍

@homargarcia5779 11 месяцев назад

Thanks G is there a sensor we need to unplug ?

@CarsYouCanFix 11 месяцев назад

Thanks! I didn't have to unplug any sensors, everything was straight forward and no electrical connection to the water pump.

@rickybobby7276 2 месяца назад

What led you to replace the water pump? Mine doesn't seem to be working, but I'm not sure. I tested the thermostat in boiling water and it opens, but when I remove the top radiator hose from the radiator the coolant barely comes out. I think it might be the water pump, but I don't know.

@CarsYouCanFix 2 месяца назад

This particular one was leaking coolant.

@malibayman 5 месяцев назад

How long between revving cycles?

@CarsYouCanFix 5 месяцев назад

No wait time between Rev cycles, go from one to the next immediately

@Byrd819 8 месяцев назад

What was the ratio for the coolant mix?

@CarsYouCanFix 8 месяцев назад

Since I used the "Consentrate" version, I mixed 50/50 with distilled water. Zerex does also carry it pre-mixed 50/50 if you don't want to do any mixing yourself.

@Byrd819 8 месяцев назад

@@CarsYouCanFix Thanks. Ill look into it for the drain and fill. Have a 2014 CX5 GT with 435k on it. Original Mazda water pump. Guess I got lucky. 🙏🙏

@willbbrown4376 8 месяцев назад

@Byrd819 I just bought a 2014, Mazda 6 with the manual 6 spd. 193k and it's dry as bone underneath everywhere. It drives like new too. Drives real solid with no suspension or steering issuse. It's got plenty life left.