MICROTECH ULTRATECH GETS Ti SCREWS + DISASSEMBLY & MAINTENANCE - NO MORE SPRING SOUND!

Подписаться 3,7 тыс.

Просмотров 12 тыс.

50% 1

Thank you for watching! If you like what I’m doing please hit the thumbs up, subscribe and hit the notification bell to see all future videos! I’m working hard to put out quality content consistently and I’m doing all of it for free. All reviews and items featured on this channel were purchased out of my pocket and I have absolutely zero incentive to tell you anything but my absolute honest thoughts and opinions. I do this because it’s my passion and I want to help people who share the same interests! I’d love to hear your feedback and what you would like to see next as well as any constructive criticism that may help me to make the best content possible!
Sincerely,
Sean
⭐️CONTACT INFO⭐️
📥Email:
asapboost92@gmail.com
📸INSTAGRAM:
@bladesandfades_
⭐️WAYS TO SUPPORT⭐️
💢Like, Share, Subscribe!
💢Buy Me A Coffee!
www.buymeacoffee.com/BladesAn...
💢Sharpening services are available for $30-40 Any blade, angle and finish you’d like up to 160,000 grit!
💢Holographic die cut channel stickers are available for $4 each. If you’d like to purchase more than one additional stickers are $3 each!
💢You can also donate via PayPal!
asapboost92@yahoo.com
💢Become a Channel Member- 5 different levels available starting at $3.99!
🛠THE TOOLS AND SUPPLIES I USE🪛
🔥CARBON FIBER KEYBAR amzn.to/3Nt1jEz
🔥KME SHARPENING SYSTEM
amzn.to/35cT6mj
🔥WIHA TORX DRIVERS
amzn.to/34SYNWW
🔥KME KANGAROO STROP
amzn.to/3s7IZs5
🔥BEAVER CRAFT PADDLE STROP
amzn.to/3s9LKcw
🔥GREEN STROPPING COMPOUND
amzn.to/3H23Hhe
🔥CGSW.US RESIN BONDED DIAMOND STONES
www.gritomatic.com/products/c...
🔥GUNNY JUICE DIAMOND EMULSION
m. groups/4830783...
🔥SPYDERCO MILLIE PM2 P3 CLUB
m. groups/1141550...

Опубликовано:

27 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@SpecterSeventy2 2 года назад

I’ve done this “anti-spring-ting” on a few on my Microtechs myself. If I could give some un-solicited advise, I’d say you don’t need to use as much white grease. A 1/4” long dob of it in the middle of the spring will do the job nicely. If any portion of the grease is touching the spring, it dampens all of the spring resonance. Also, I was a little scared for you on the disassembly. When the blade is either locked open or closed, there is a small amount of tension on the main spring. With the top cover off the knife, it doesn’t take much for the track to go flying out of the main body and either damage the track hitting a hard floor or losing one of the two launch springs. Always best to disassemble any OTF with the knife in the “off track” middle position so nothing is under load when the knife is opened up. Very nice Bugout btw. 👍

@jensen_2261 Год назад

Really like the video! I was happy to see a relatively new vid on a disassembly. If you look at a newly manufactured Microtech knife and one made about 2-3 years ago you'd notice a big difference in the leg mounts and X button. Which is the reason why I wanted to see a new one. I work for a company that manufactures them with a newer process of Metal Injection Molding. Anyways, thank you again! Just happy to see our parts in the final assembly.

@GhostRiderUSA 2 года назад

Looks good Sean!

@jeremyspaulding7735 2 года назад

That's a very cool upgrade! The blue gives a nice pop. Great video brother 👍

@mikemike0000 Год назад

What a beautiful set of knives! The Ti screws really make almost any knife better!

@JMBAmericanIronShallNotBeInfri Год назад

Love the new screws with the black handle, and beautiful Benchmade!

@BLADESANDFADESOFFICIAL Год назад

Thanks brother!!

@DV77737 2 года назад

That new hardware looks amazing

@jimmint5672 5 месяцев назад

That edge on your benchmade looks sick af!!!

@greyman1363 2 года назад

I took a needle and thread 🪡 and lube the thicker gage string down the spring and it works to permanently stop spring sing . I actually used a rc car pull start from my HPi savage . It fits right down and I clip it enough to just stay in place and don’t affect the spring at all it’s actually quieter than my other microtechs knifes .

@kevinbrockert3090 Год назад

Love it, put the same screws in my microtech ultratech ☠️

@Antimatter. 2 года назад

Thanks Sean , I have a microtech UTX 85 that has cheap spring sound , That looks like a good fix

@BLADESANDFADESOFFICIAL 2 года назад

You’re welcome! And yeah brother, so far so good!!

@12345678927164 2 года назад

Love these screws but wish MT themselves would make some available. I know a lot goes into their custom worked screws

@dennisjaros3345 10 месяцев назад

Nice looks great im tring to find a blued titanium glass breaker & blued titanium clip ..i can find the screws! but not a blued breaker/ clip

@aya8604 Год назад

Hi if I have a Exocet and mini troodon what bit would I use?

@southpaw_knives 2 года назад

I wonder if the grease on the spring will attract dirt and lint to it and gum up the actions.

@BLADESANDFADESOFFICIAL 2 года назад

So far so good, no problems yet! It probably depends on the environment you use it in though. If I was in a dessert I’d probably avoid it but for me it works great!

@ckdunahee4478 Год назад

Great video, just a thought, maybe it would keep the other parts cleaner if you took the spring off then greased it😀

@BLADESANDFADESOFFICIAL Год назад

Yeah you’re right but it all spreads around anyway the more you cycle it so it seemed like a pointless extra step to me. Its still going strong though! Haven’t disassembled it or cleaned it since and it’s still cycling beautifully! This Protek white grease is designed to have good adhesion to the surface you put it on and minimum drag and it seems to do both of those things extremely well. I use it on the gears of the rc cars I race competitively and it really doesn’t gum anything up. Definitely not your average white grease!

@davidpatterson6589 Год назад

i got the bit to take out my screws on amazon and got it next day. i want to get some proper oil and grease for my ut but all i had was gun oil. it worked but is a bit slow on the opening until it gets lubed everywhere internally it can and wipe off excess i see on the blade. thanks for the video and God bless you

@BLADESANDFADESOFFICIAL Год назад

Hey brother, I’ve personally tried just about ever type of lubricant and honestly wd-40 or rem oil seem to be the best way. Just spray it down into it and keep firing it and fling out the excess. Gunny Magic also does well and normally Id say Gunny products are superior but tbh I didn’t see any real benefits over wd40 (with this specific one).

@BLADESANDFADESOFFICIAL Год назад

When it comes to microtechs, some of them just never really achieve a good action. Sometimes they are just pretty stiff no matter what you do.

@BLADESANDFADESOFFICIAL Год назад

You’re welcome, God bless you as well!

@benjimilam2398 6 месяцев назад

Can you get those screws tight or will they strip like the other ones

@BLADESANDFADESOFFICIAL 6 месяцев назад

Yup, still have the same screws in it and they have never came loose.

@nenadcubric2663 Год назад

Just orderd the tool and fror the Glaasbreaker screw from ebay

@greyman1363 2 года назад

Lithium grease is the best for spring sing

@mjk4378 Год назад

Where did u get the screws? I wanna get some gold ones

@BLADESANDFADESOFFICIAL Год назад

Etsy, they are ok but they stick up a little bit so you can feel them compared to the factory screws

@greyman1363 2 года назад

I don’t trust the titanium screws. They look good , but I fear they break . Do they lay the same way as the original screws ? It’s prosthetic camera glair on the blue screws but they look to not go as deep and lay flat on the top chassis scale . They do sell the blue glass breaker to complete your build

@dennisjaros3345 10 месяцев назад

I'm wondering the same been looking for real blued titanium glass breaker and the clip and screws but I can only find the blue titanium screws ...

@mr.mduweit8926 5 дней назад

How inget this Titanium screws?

@BLADESANDFADESOFFICIAL 5 дней назад

@@mr.mduweit8926 I ordered them off of Etsy as well as the special tool

@casualtactician9537 Год назад

I feel like you left some cotton in there by the spring but I need one I just can’t buy one online I guess unless it’s in my state

@BLADESANDFADESOFFICIAL Год назад

This is the only time its been apart and I’ve been using it ever since with no problems so if I did, it doesn’t matter lol.

@BLADESANDFADESOFFICIAL Год назад

I don’t think theres any states that online knife dealers don’t ship to. You won’t find them on ebay or amazon and it might not be legal to carry in your state but I guarantee you can purchase one and order it straight to your house!

@nenadcubric2663 Год назад

Does the tool fit exactly?

@BLADESANDFADESOFFICIAL Год назад

The one i got did

@JMBAmericanIronShallNotBeInfri Год назад

Does opening a Microtech void the warranty? "We understand that some customers may prefer to maintain their own knives. Sharpening your knife does not automatically void the warranty. The warranty will remain in effect so long as the blade is not improperly sharpened and the handle is not damaged or stripped due to disassembly, determined at our discretion. Sep 7, 2020" MICROTECH So yes you can take it apart as long as you're not an idiot!

@BLADESANDFADESOFFICIAL Год назад

Nice to see that they updated it but yeah I agree! If you know what your doing there’s no reason for them to even know you ever disassembled it in the first place. However Id still do whatever I want to do with my knives regardless. I’m not the kind of person that sends things back when theres a issue. Ive always fixed things myself, if I can’t figure it out then ill do some research or keep trying till I figure it out. I’ve never sent anything in for warranty knives or otherwise so I could care less personally. I do think its a good thing for companies to stand behind their products though and reasonably honor claims for the people who aren’t as much of a do it yourself’er or mechanically inclined!

@CobraKaiNoMercy Год назад

I’ve called Microtech and the girl I spoke with said the warranty is not voided from you simply taking it apart, but if you lose something (a spring for example) or break something that’s on you and will void the warranty.