MobLite6 & MobLite 7 // The efficient Mobula Whoop // Long Flight Time // Low Profile

Подписаться 58 тыс.

Просмотров 78 тыс.

50% 1

Flights, fixes and tweaks, and unibell motors.
Some flight footage is “blurry” due to camera damage.
Moblite 7 Banggood bit.ly/3h3uEWr
MakerFire bit.ly/2WWBSlW
-Use code "NickBurns" to save 6% off
Moblite 7 Spare Frame bit.ly/37DRKjm
Moblite 6 Banggood bit.ly/2WzKVJe
MakerFire bit.ly/3aNwnOy
-Use code "NickBurns" to save 6% off
From RaceDayQuads bit.ly/3idOxL8
From GoodVentureDrones goodventuredrones.com/catalog...
Angry Don FPV bit.ly/3nHL49u
Nathan Loopz bit.ly/2tntxZC
HM Team Pilot Page www.happymodel.cn/index.php/pi...
Jessie Perkins tinywhoop.com
Jelle Bakker / jelle.bakker.37
Dr. Ben Hakt / benedikt.haak
Mr Shutterbug bit.ly/2WPV4Sp
Patrick J Clarke / patrick.j.clarke
Project MockingBird projectmockingbird.squarespace...
IGOW Channel / fpvskittles
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► 1s Charger HTRC X4 bit.ly/2RNav9O
► Radio I use the original X-Lite, no longer recommended. Look at the RadioMaster TX16S bit.ly/2UxOq2i
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ-NB
► Amazon - amzn.to/3iJjTrT
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon
► / nickburnsrc

Наука

Опубликовано:

28 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 490

@NickBurnsFPV 3 года назад

Some flight footage is “blurry” due to camera damage. 😢 Quantities are limited, no coupon at this time. 💥Moblite 7 bit.ly/3h3uEWr Moblite 7 Spare Frame bit.ly/37DRKjm 💥Moblite 6 bit.ly/2WzKVJe

@SOLARFPV 3 года назад

You mentioned welder? I think you did a video on welder. What do you use? I use contact glue for fast repairs and plastic glue which works ok but needs to dry for 12 hours 😊

@NickBurnsFPV 3 года назад

@@SOLARFPV Yes, I still use welder. Is there a particular contact glue you like?

@SOLARFPV 3 года назад

@@NickBurnsFPV I use Locktite superglue, and a Danish plastic glue from Dana Lim. I have tried lots of different types, but none really hold out more than a few crashes after gluing and hardening.

@dcfpv9004 3 года назад

Do you think the flight controller will be made available separately

@SOLARFPV 3 года назад

@@dcfpv9004 eventually it probably will, like their other models, but because of hype, they can't produce enough for both model and spare part. I hope I am righ.

@allennickles3970 3 года назад

Yeah I think a lot of people forget about the Whoops once they get to fly open prop design.This Chanel & Whoops was how I learned how to fly. And a purchase from Adam Bomb 2.5 Tomoquad build was my next step up from whoops! And where I really was able to dial in acro flight. Now 10k and over three years later..lol...I like to really show my sincere respect to all the inventors & developers to the whoop community bringing this hobby to where it is today!😀 And most of all!!! Thank you Nick for taking the time to answer all my many questions back in those noob days almost three years ago now Guys like you is what makes this community great!😀 HAVE A VERY MERRY CHRISTMAS NICK! & HAPPY NEW YEAR

@NickBurnsFPV 3 года назад

Thank you Allen. I appreciate the kind words.

@Vosper385 3 года назад

Hi Nick, yes I saw Mr Shutterbugs' video on his light whoop and that's what prompted got me to order the Moblite 6&7, great to see you got yours so quickly, good reviews as always. Thanks.

@AGILISFPV 3 года назад

Super anxious to see how this board performs. Love how happymodel pushes the envelope all the time.

@MCsCreations 3 года назад

Fantastic flying, Nick! Pretty nice looking quads! 😃 Great review!!! Happy holidays! And stay safe there with your family! 🖖😊

@shogunemperor 3 года назад

Awesome review mah man! Brilliant flying as always! Love watching u fly around the house.

@jacquemeier2005 3 года назад

A long way from a walkera ladybird with micro vtx + cam I used to fly to a mobula 6. These were the days when an 8inch quad was “small“. B) And I loved my early brushed racer so much. And now everybody loves the small rockets too. :)

@echobeefpv8530 3 года назад

Love my Mob 7's, but I'm just a casual flier. Great review Nick !!

@rookie101_ 3 года назад

Love the flight time on these.

@moblades1 3 года назад

I agree with you on the 75mm aspect. I put my Mob6 HD components into a Mob7 frame with 40mm props and it flies so much better.

@legendarypot8oanimates160 3 года назад

I am currently putting my uz65 components into a tinyhawk frame with 40mm propellers.

@tomleclercq3518 3 года назад

Great video. You are the first person I've ever subscribed to. Love your content!

@Cr125stin 3 года назад

Ooo sweet! I commented probably close to 2 years ago saying how my go to whoop is my inductrix plus because it had more flight time than any brushless whoops at the time. This changes things now. I’ll have to get one. Thanks for the video!

@NickBurnsFPV 3 года назад

The inductrix started indoor flight for me. So cool someone had the thought

@basgerritsen9669 3 года назад

Great video Nick!

@MyJam1981 3 года назад

Awesome review Nick 👍 thanks for all your content and hope you and you family have a good Christmas 🌲⛄❤️

@gmascagni 3 года назад

Funny we were doing this mod on the M6 over a year ago documented on RCGroups M6 thread and on FB Whoop groups etc. For even lighter build u can use a rubber band to secure the cameras to the front and use those nylon screws. Shutterbug has ton's of other to make them lighter. It's good to see that the vendor must be paying attention to the community. I recall you converting your M6 into a 75mm frame for better performance as well. As always great content.

@knoopx 3 года назад

i was impatiently waiting for your review :)

@moblades1 3 года назад

Good note on updating firmware. When I started... I learned quickly that updating to the latest firmware often required new tuning.

@JEMTAC 3 года назад

nice flying, love your vids mate.

@ericcoker8784 Год назад

I am so damn happy! I love this new hobby and pop my cherry on this Mobula6 and Moblite7. Short story: I had purchased a 2nd Moblite7....the first was (now is resurrected) an awesome flyer and the second one was bought BEFORE I almost scraped the first. The first one had a bad battery ground and tried to resolder it back. I have a good iron and rusty skills on soldering. I ended up cooking the board due to the solder included in a kit (solder was the higher temp 99% tin) and using almost the max heat. Not to give up, I got the Newbee drone field fix it kit. Didn't use the supplied iron. Practice and more practice on the cooked board and the "practice" board that was supplied. I did good. Board worked, my solder joints for the motors is good to very good. Power and ground was decent. Two motors were reversed. Took a day too figure how to fix. But Bl heli and Betaflight and many many youtube videos later...done.

@RenegadeFPV 3 года назад

Great review buddy, M 7 looking good

@allennickles3970 3 года назад

You dont hear much from the original whoop guys anymore unless your on a forum or blog rc groups, etc..and every once in a while they might post. For me they are the legendary guys that innovated fpv to where it's at today. I started with brushed toy whoops with a camera added on top of it ..and RU-vid chanel like this one. Learning everything I could about fpv. And now after hundreds of builds at all different sizes I find myself right back where I started. I also like to give a great amount of gratitude to all those guys mentioned in this video & also you to Nick for pumping out great content as always for so long! I remember starting to talk to you back in Aug 2018 ..lol...Wow how time has went by! Cheers🤗

@NickBurnsFPV 3 года назад

Yes sir. The guy I think doesn't get enough credit is Benedict. He was all about the micros and was the leader in brushed motors. Plus he was very interesting to listen to. I think he had to close up shop and move on due to family health issues. :(

@MrPolleke1949 2 года назад

This is an awesome video.🙌 Explaning a lot and in the meantime showing flights in the lower left corner.👍 Well done. 👌

@piraciosu3 Год назад

So glad I found your channel, started flying fpv because of you!

@NickBurnsFPV Год назад

Thank you. I hope your having fun as well.

@SOLARFPV 3 года назад

Selfadheasive cork coaster, cut to fit the FC top. It is light, shock absorbant, fire and waterproof.

@h2o-fpv623 3 года назад

Great video thank u and Happy Holidays. I like the review u give a tone of explanation that is informative and with that we can be prepared 😉.

@maadfisher 3 года назад

That moblite7 looks fun! I’m really interested in that fc, I really like the proper receiver antenna and 200mw vtx. Hopefully the fc is reliable and those props are available soon to upgrade my own mobulow7 in the more durable Mobula7 v3 frame. Thanks for another great review and stay safe.

@helixinwonderland8938 3 года назад

Looks like my first quad. Build it 2 years ago with an eachine E011, a crazybee F3, a turbowing camera and VTX. Still working! The camera is between the hoops fixed with some double sided tape and a rubberband.

@NickBurnsFPV 3 года назад

That sounds about right. I think my E010 video has 100k views crazy how excited we were to see a brushed quad not the inductrix 🤪

@tarkusxfpv8010 3 года назад

Yea its old xD But for people who dont want to tinker its good but the hardware won't last so basically if you dont like to repair / fix id not let a beginner fly this . Good things is the new FC and the HQ 40 biblades i want to test .

@me-vo3di 3 года назад

2:50 in Betaflight CLI do "set crash_recovery=ON" and should be able to recover from such crash even in Acro Mode. Helped me a lot to start with acro inside since I used to crash a lot at the beginning.

@michaelreyes8670 3 года назад

I was very impressed with Mr. Shutterbug's Super lightweight Whoop. I was thinking of building one until this ones come out. I like to get me one of these instead and maybe mod it with a RD3 Shifters whoop frame. Great review as always. That looks like a hubsan clear prop. I still get plenty of them. Anyway Happy Holidays and Great New Year!

@electroddxful 3 года назад

Great review Nick. You know I'm picking these up. 👍🙏👍🙏👍

@dronedaze 3 года назад

did you get them yet , I might get the 6 , if you have them , what batteries you use on the 6?

@electroddxful 3 года назад

@@dronedaze I haven't pick them up yet But I will soon. I get back to you when I receive it.

@dronedaze 3 года назад

@@electroddxful thanks for a answer , I think I will click on the 6 today ,,,and go with the 300 for now ,, RDQ dosent have the 7

@turboomni848 3 года назад

Got my Moblite 7 today and experienced the hopping on take off like Nick mentioned.. Turned off "Always Enable Air Mode" Off and it stopped. I am no Nick Burns in the flying but I am impressed so far with this thing. Long flight times indoors in my house ,7 to 8 minutes just cruising around in acro mode. We shall see how this thing holds up. Going to try some 300mah,450,and 520 mah lipos too.

@smallsoundrc9678 3 года назад

Thanks for all the info so helpful 👍🏼

@beachinrc101 2 года назад

Great flying bud & thanks for all info

@NickBurnsFPV 2 года назад

Sure, let me know if you have any questions. :)

@trajanfpv 3 года назад

I like the 7. That may be a future buy for me.

@hakancakirkan2319 3 года назад

I liked the camera mount

@AsylumFpv 3 года назад

I'm curious of the durability of parts being more exposed? And the fact that they aren't plug and play, so could be interesting to see! Thanks for the review Nick and wish you and your whole family a very merry Christmas! 🎄🎅

@imothy 3 года назад

Thanks Nick. Your vids are always informative. I wanted to pass on a little trick i've been testing out, soak your plastic frames in WD40 overnight, it will help them not crack as much, especially during the winter. This comes from backyard RC racing club, we'd all soak our A-Arms in WD40, and many other parts that we broke all the time!

@NickBurnsFPV 3 года назад

Interesting, the plastic must soak up some of the wd40

@jibethereal 3 года назад

Thanks for your review! Love these 2 news happymodel toys... I pre-order the moblite6! 👍👊😍

@NickBurnsFPV 3 года назад

moblite6 preorder? I show only "Arrival Notice"

@vladrov12 3 года назад

It can be preordered- Expected to ship before Jan 11. Banggood (10% discount code “BGaFf10oFf“)

@ShinyVideoStuff 3 года назад

Can't wait to see an STL for the camera mount and experiment with that!

@MrGone2k 3 года назад

Split a zip tie in the right spot for that style of mount. It's not as easy as it sounds to do, but I think that's where this concept originates from

@tarkusxfpv8010 3 года назад

Different models here bro www.thingiverse.com/thing:3695276

@ShinyVideoStuff 3 года назад

@@MrGone2k yes, not managed to get good results with a zip tie myself.

@NATGEOANDSTUFFPaulbrannan 3 года назад

Great review nick.as allways

@cyberbeefpv2810 3 года назад

so cool, long flight time

@toxicfpv304 3 года назад

these look pretty cool for a fun indoor whoop..... intrested to see what happens with this new breed of ultralight whoopw

@pksteffen 3 года назад

Appreciate your time Nick! Very thorough review. If you buy motors separately you can get 25000kv. Wish they offered options in the BNF.

@NickBurnsFPV 3 года назад

Yes, I would likely get some 25k motors on there and change my camera angle on the moblite7.

@josefdahari 3 года назад

Dope man been waiting to hear about these glad you got them man

@pimpedoutstereos9747 3 года назад

That camera looks so clear

@tydesenfants7926 3 года назад

Just took my mobula6 and put the motors, fc and camera onto a mobula7 frame. Wow. What a difference! Went from 90 sec flight times to well over 3 minutes using the stock original 1s 300mah batteries. Highly recommend. Using 4 blade HQ 40mm props with 2 of the blades cut off on the original mobula6 19000kv motors. Excellent performance!

@user-yk1cw8im4h Год назад

I love how easy it is to transform between the two models instead of buying yet another quad

@drewskrds7762 3 года назад

I was just wondering If you could solder on an external receiver like a xm+ or rxsr? Thanks for the great video Nick!

@licensetodrive9930 3 года назад

Literally just started watching Rotor Riot's latest video and this notification came in! Ah well, that can wait 30 minutes :) Wait, 30 minute Mobula review video? Niiice

@NickBurnsFPV 3 года назад

lol, really long, sorry, I cut out as much as I was comfortable with

@licensetodrive9930 3 года назад

@@NickBurnsFPV No need to be sorry, great view of a great line of whoops :)

@661FPV 3 года назад

Secret project hu? Excited to see it. I also owe mr benidict thanks for my early whoop days, remember rambo whoop?? Put a 250mah in that 65mm and thank me later! It works on brushless whoops too! Ive been building alot of mobula whoops myself.

@NickBurnsFPV 3 года назад

I do remember the rambo whoop. There was a shark frame I recall being very tough to get.

@RubyS.1 3 года назад

Hmmmm I bought a few models of the r3d shifters frames you had a bit ago actually super impressed and I like the aio protection they have. That said there's something to seeing the whoops in the FOV I like.

@NickBurnsFPV 3 года назад

sure, some do, some don't some are indifferent. I tend to lean towards seeing the whoops as a reminder of how small the quad is :)

@jamesroberts8971 3 года назад

Great video 👍 I think I may have to get a Moblite7 🙂

@fpvnme4845 3 года назад

ahhhh NICK I just got the board 75mm for the 65mobula,, damn you bang good with your 2 month wait times

@NickBurnsFPV 3 года назад

I have had decent luck with the $2-$3 shipping options, generally about 2-3weeks.

@fpvclub7256 3 года назад

Nice!. Maybe when my trashcan is ready for the ... Trashcan, this looks like a good replacement :D

@bentravis99 Год назад

Great video Nick, thank you! Your camera looks so much better than the one on my Moblite7 though; mine has very dark vignetting all around the edges that is very hard to adjust out. Oh well, the Runcam Nano 3 was never known as a good camera anyway.

@NickBurnsFPV Год назад

I wonder if maybe the lens took a hit? Was it always that way? I have flown the nano 3 many times and not seen a vignetting.

@bentravis99 Год назад

@@NickBurnsFPV It's possible, I have had it for a year now with many flights on it. I might have to buy a spare to swap out and compare, thanks!

@itsme-fr5fr 3 года назад

At first sight I was thinking " um...nick you might need a flight controller on that thing before you can take it out for a flight, I dont think it will fly with just the camera and vtx on there!!" 😁

@SOLARFPV 3 года назад

Wow, very impressive how Happymodel keep innovating the micro RTF world, inspired by community experiments. I am a huge fan of Shutterbug, who has been working on these type of light builds. Should we call them nano, since they are so light and small. Looks like they fly really great. Thank you for the review, I did see them on BG X-mas sales, and was wondering how they fly. I am very impressed.

@DAZprojects 3 года назад

Try the uruav uz80, it seems a pretty good toothpick!

@alford35 3 года назад

So I’m fine running the TBS Multi-Protocol module on its FrSky D8 firmware in my Tango 2? I would only need to upgrade the module for FrSky’s newer firmware if were using a newer larger quad? I’m new to all this but have the module bay to install on the Tango 2 along with the multi protocol module and Tracer module. I just got the nano hawk today that has FrySky and plan on getting these Moblite models.

@itsme-fr5fr 3 года назад

@Nick Burns hey man, I couldn't agree with you more when you said that the prop puller is totally useless for pulling props but if you need unhook a motor that uses a connector from the esc then its definitely the right tool for the job! Not sure if you already knew that or not but i figured I'd share incase you or anyone else didn't because that definitely a great little nugget of fpv knowledge that I feel hasn't been talked about very much but think the everyone in the micro community deserve to know. Wow my message ended up much longer then expected when I started out but in the future if even one motor is saved from getting is connected ripped of or even worse and having a wire or its wires torn off then it was all worth it in the end !!!!🤣 Happy Holidays to all and to all a good night!!!

@NickBurnsFPV 3 года назад

Your right, those do fit perfectly around the connectors, and I think your right again, I don't think I have ever mentioned that.

@KernsJW 3 года назад

I use e6000, ever compared that to welder? Thanks for the review, i like the mob lite 6 as i have a small condo. I think we could 3d print a more protective camera mount and frame protection.

@NickBurnsFPV 3 года назад

The e6000 I have tried is a different sort of adhesive. I hear there is the same e6000 as welder but those I have tried feel spongy and don’t “stick” as well

@qm2105 3 года назад

Damn! I was so impressed by a Shutterbug’s version with mobula7 frame back when he posted his video, so I immediately ordered the parts he recommended. It took a while before the parts were delivered and I just finished building it last weekend. And it turns out we can just buy a bnf now )) But anyway, mine is with crossfire and betafpv board and it weights the same as this one. It is super fun to fly and it feels very controllable. The only drawback is that the glued camera can come off in a crash, and this is exactly what happened yesterday.. So indeed I recommend getting a version 7 of this two. I think this is the best whoop so far for the indoor flying.

@NickBurnsFPV 3 года назад

Which kind of glue was used?

@qm2105 3 года назад

@@NickBurnsFPV I used e6000 plus. Couldn’t find the regular one here. It holds pretty good, but didn’t survive a bad crash. Also ripped the 5v wire from the camera together with the pad and had to solder the wire directly to the resistor. So durability is the main concern here, but I still think this one is the best whoop you can get for the money.

@DougEfresh. 3 года назад

Very cool. I got the Shadow Fiend for more flight time but I'm more of a whoop guy and I would like to see the flight time of 8-10 minutes. This is a good start, thanks.

@NickBurnsFPV 3 года назад

I think angry Don FPV hovered his for 10mins if that counts. :)

@DougEfresh. 3 года назад

@@NickBurnsFPV yeah that's perfect

@DougEfresh. 3 года назад

@@NickBurnsFPV this technology is going to make this a good year I think. Especially if they can get digital stuff cheaper than DJI.

@cinialvespow1054 3 года назад

I see it came with custom bi blade hq props instead of the cut down 4 blades? Very nice!

@NickBurnsFPV 3 года назад

yes, HQ has made some true/official bi-blades.

@splugereport 3 года назад

love the 2s mobula 7 still. Wonder if these have the same power to weight

@NickBurnsFPV 3 года назад

I really don't know. I have not seen ratios on either. My feeling is no, even at this weight the power to weight is higher on 2s mobula7.

@jmoore3854 3 года назад

Got my MobLite 6 and 7 two days ago. On my small indoor course I was getting 9 to 10 1/2 minutes of flight time on the moblite7 with the 650mah battery flying 40% to 50% throttle. First time I ever saw the blinking 10 minute warning on the OSD. For the MobLite 6 I was getting almost 5 minute flights on the included 300mah battery. Thanks for the review..... John from Chicago

@fpvraver 3 года назад

Hey Nick happy new year 🎈🎆🎊 !!!!! When will the pre orders ship for this quad copter?

@NickBurnsFPV 3 года назад

I don't have that sort of information. I don't have any recent comments indicating pre orders are shipping. They could be but I don't know about it. :(

@shenanigan3083 3 года назад

Pulled the trigger I've bought alot of things for everyone else so dad treats himself thx nick ofcourse I used the link

@NickBurnsFPV 3 года назад

dad needs gifts too! :)

@keithmccormick1272 3 года назад

I see you talk about "blurry" that is what I see also . wondering if its the motor bearing slop

@robertf8645 2 года назад

Did you flied this with stocks settings, or did you change tuning? Great drone I just got it and I will add Eachine UZ65 canopy. I like to have more secured board and especially the VTX antenna.

@NickBurnsFPV 2 года назад

Yes, I fly with stock settings. Its pretty rare I change the pid tune on bnf quads, and when I do I try to make it a strong point in the video.

@robertf8645 2 года назад

@@NickBurnsFPV O thanks. I think you flied quite manoeuvre so probably there is no need to change anything for ordinary flyers. I like to fly, but I'm weak at tuning and such things. Good luck.

@NickBurnsFPV 2 года назад

@@robertf8645 yes, far to much is made of pids and betaflight versions, when we just need to fly.

@valden 3 года назад

Cool vid Nick. Based on the weights and such, i really would argue the 75mm would be better in every way except for being bigger of course. I was planning on doing the same thing, but just use glue to hold the camera in place and not use a canopy. Those motors are pretty nice though! I have some tpu stuff that i can put on top of the board that weighs very little, so that should provide some protection.

@NickBurnsFPV 3 года назад

Yes, I think we agree. I hope I didn't cause any confusion as to my stance

@valden 3 года назад

@@NickBurnsFPV of course having both is the best option haha.

@grabirfan 2 года назад

Hi Nick, love your videos, I am a fpv newbie, so here is some silly question?, does this moblite7 bind with Taranis qx7 frSky transmitter, or do I need extra receiver, thanks in advance. Also is it for beginners?

@NickBurnsFPV 2 года назад

whoops are very good to start with, small light and safe. The qx7 should bind to it, but if its a brand new qx7 it might not due to the firmware frsky puts on new radios. Its really frustrating that frsky has new radio firmware that isn't compatible with d8 mode used on most whoops. We have been using d8 mode for years then frsky decided no more on their new radios.

@divingfalconfpv4602 3 года назад

I think he trimmed some the duct to save weight too

@Sircleanfpv 3 года назад

Could you please try it with jesc 48khz?

@BornIIfly 3 года назад

Nick great review! As saw it I thought 75mm toothpick frame. The FC looks really cool! Have to try one. Read your gear for goggle, orca.one. Sry Nick it Orqa.FPV.one Merry Christmas 🎄 & happy holidays. 🤓😉😘

@w1llyFPV 3 года назад

Hello Nick, evrey time after your rewiew I want some more 😊 Moblite 7 is very nice regarding flight time. Any links for mor lipoblike 620mah?

@NickBurnsFPV 3 года назад

There is a 520mah here www.banggood.com/Gaoneng-3_8V-520mAh-80C-1S-HV-4_35V-Lipo-Battery-PH2_0-Plug-for-for-Emax-Tinyhawk-Kingkong-or-LDARC-TINY-p-1417153.html?p=RZ29002443189201508J&cur_warehouse=CN , but no 620, maybe it was a typo meaning 650? This is a 650mah www.banggood.com/Gaoneng-3_8V-650mAh-60C-1S-HV-4_35V-Lipo-Battery-PH2_0-Plug-for-Happymodel-Snapper7-E010-M80S-Tiny7-Beta85-RC-Drone-p-1512850.html?p=RZ29002443189201508J&cur_warehouse=CN

@xiledfpv2273 3 года назад

Hey what antenna you use on your goggles. My video is crap in my house and yours always seems so good

@cookedfpv Год назад

ditto, I'm very jelly of his video reception, mine was almost useless with any distance or drywall between me and it. I gave up and switched to a spare x12 fc and swapped to gnb27 connectors while I was at it. my favorite whoop now, but I suspect my antennas are still less than optimal.

@tydesenfants7926 3 года назад

Any source to the 40mm props? I upgraded my Mob6 and put it on a Mob7 frame but I can't find 40mm 2 blade props. I am using HQ 4 blades and cutting 2 of the blades off which works fine but is not ideal.

@maxfliesdrones1613 2 года назад

Just woundering, what is the length and diameter of the copper vtx antenna. Mine broke and im not sure what length it was. Thanks

@diegofneira 3 года назад

Nice video... I’m thinking about buying the 6... any recommendations on how to prevent the noise in the video ... sometimes I get bad image with my Mobula 6 already ... noise... interference... I’m using my Dji goggles with a true rc receiver... my place is a very small place and I have private wifi 5G & 3G plus my building has lots of wifi signals for the visitors... should I at least turnoff my router when flying in my place to improve the quality of the video feed ???

@NickBurnsFPV 3 года назад

Fly on raceband 8 to minimize the impact of wifi interference. A capacitor on the battery lead will help with internal noise.

@sgtfelixfpv8451 3 года назад

Moblite 7 vs original mobula 6, which one would you choose? Thinking about getting into tiny whoops for indoors.

@dwheeld1664 3 года назад

As always, great video! Have you tried to access smart audio with the Moblite7? Asking because I can't get it to work with mine. I want to see what power the video is running and change it if necessary. Default is fine for indoors but I want to fly it outdoors also and may want to increase power.

@NickBurnsFPV 3 года назад

yes, I haven't not had an issue. Is the trouble getting into the osd, or specifically the vtx control within the osd?

@dwheeld1664 3 года назад

@@NickBurnsFPV When I do the stick movements to see it in the OSD, all I see is a line of blinking stars below DISARMED in the center of the screen.

@NickBurnsFPV 3 года назад

@@dwheeld1664 That doesn't sound like we are getting into the osd. Does it look like this oscarliang.com/ctt/uploads/2017/07/betaflight-osd-exmaple-menu-display-3.jpg

@dwheeld1664 3 года назад

@@NickBurnsFPV No. It never changes from the normal OSD. Just briefly shows the line of stars below "DISARMED".

@dwheeld1664 3 года назад

@@NickBurnsFPV Here's a video of what I am seeing: www.dropbox.com/s/ih4eqzg4j2hxzau/smartaudioproblem.wmv?dl=0

@-Gruntled 3 года назад

I think I'd like to try that camera mount on my Mobula 6 and/or Mobula 7. If you've run across a link to the STL please reply!

@NickBurnsFPV 3 года назад

I don't believe HappyModel has published the stl yet. I would suggest checking happymodel.cn website.

@johncarold 3 года назад

First it was Mobilly gates and now the Moblite 7 my wallet is hurting ! LOL I would think that the Mob 7 would be my best guess, I just have to small of a house so I fly in my yard and so outside in no wind and through my gates. Thanks again for the video and information.

@NickBurnsFPV 3 года назад

Outside with low wind is good. Its just so rare our wind is less than 10mph.

@fpvraver 3 года назад

Hey Nick I have a question your link is a link for the frame the black frame it’s the Mobula 7 frame is that the one you referred to in the video as the strong one that’s black I thought that was a meteor 75 mm black frame ? So you prefer the mob 7 frame????

@NickBurnsFPV 3 года назад

yes, the linked frame is the frame I was speaking of. The meteor 75 frame has changed recently, I can't speak to its weight or durability.

@BrandonBeans 3 года назад

I wonder if popping 'set airmode_start_throttle_percent = 20' and 'save' in cli would fix that funny little thing on startup.

@NickBurnsFPV 3 года назад

That certainly could help. Oddity is it doesn't happen all the time. Especially noticeable in the crashy flight.

@ooOoo..... 2 года назад

Your video of the flight is really clear, very little static. My goggles/DVR are horrible. Does yours look good because of your goggles?

@NickBurnsFPV 2 года назад

It can be a number of things. Raceband 8 is the best channel to avoid wifi interference. Also, the construction and design. Google and the receiver module due make a difference as well. I have the rapidfire module with one truerc and one axii antenna.

@xfOL. 3 года назад

hey Nick, correct me if I'm wrong: this new FC has ufl connector for receiver and solder pads for vtx?

@NickBurnsFPV 3 года назад

The connector is smaller than ufl. Its called the IPEX-MHF3, its for the rx.

@xfOL. 3 года назад

@@NickBurnsFPV got it, thx!

@barryfredrick2731 3 года назад

Great vid Nick. Hey bro, what are my options on either buying or building a cinewhoop and transmitter for under $150?

@NickBurnsFPV 3 года назад

I really don't know of a combo that would come in much under $200. Most of the cinewhoops cost around $150, if they don't have an HD camera on board, then we need to buy the radio which there is only 1 the betafpv lite 2 radio at $39, the Quality control on those radios is suspect.

@barryfredrick2731 3 года назад

@@NickBurnsFPV Thanks Nick, God bless broddah 🤙 stay safe family.

@barryfredrick2731 3 года назад

@@NickBurnsFPV I just came across the *jumper T-lite* transmitter for $69, what do you think?

@NickBurnsFPV 3 года назад

@@barryfredrick2731 I have switched to it. I think it depends on how you hold the sticks and your hand size. With any radio those same considerations. Big hands like need a bigger radio, small hands smaller radio. i am pretty average, I believe my ring finger is an 11, I lost my ring a few years ago in a car crash.

@arpus007 3 года назад

how to have such a beautiful picture quality without distortion?

@NickBurnsFPV 3 года назад

I fly raceband 8, with the rapidfire module and two circular antenna.

@dcfpv9004 3 года назад

Litterally made two ultralight 65 & 75 two days ago 19 grams for the 65 with 0802 19000 happymodel motors crazybee lite board beta frame and lite camera 26 grams on the 75 with 1102 18000kv betafpv motors crazybee lite board mobula 7 frame and the beta pro cam Both super fast and handle great most parts are what I had lying around in my junk box Hot glue works great for a camera mount 😂

@GTR4N1985 3 года назад

What DVR are you using? Footage is so clean!!

@NickBurnsFPV 3 года назад

I use the rapidfire module inside the orca goggles with one truerc antenna and one axii antenna

@rdoc7818 3 года назад

I just got my Moblite 7 and I’m loving it so far! One quick question though. When I go into Betaflight there is no Acro mode available. The Betaflight version is 3.5.7. Do I need to flash a newer version or something? I’m pretty new to this so bear with me. Thanks!

@NickBurnsFPV 3 года назад

definitely do not flash. Acro mode is when we don't have angle or horizon mode active. The only mode would be air mode which can also run in angle and horizon.

@rdoc7818 3 года назад

@@NickBurnsFPV Oh really? So I can just toggle my 3 position switch to an “empty” position that doesn’t correspond to a mode in Betaflight and I’ll be in Acro?

@NickBurnsFPV 3 года назад

@@rdoc7818 Yes, we would only want air mode, so we have control at zero throttle, no angle or horizon mode.

@rdoc7818 3 года назад

@@NickBurnsFPV Nice! I tried it this afternoon and it works great. Thanks for helping this newbie out. Keep up the great work. I love your vids!

@Kearl1988 3 года назад

Is it possible to use a Canopy to get the Cam to the "Old Place?" What you say about the 2 Blade Props, are they good or better use 3 Blade? Chears and Merry Xmas

@NickBurnsFPV 3 года назад

2 blade are more efficient so longer flights. I wouldn't say one way or another is better depends on what you like.

@Kearl1988 3 года назад

@@NickBurnsFPV great, so 2 blades are fine, and what you say to the Canopy?

@NickBurnsFPV 3 года назад

@@Kearl1988 Adding a canopy is about 1 gram, not a huge gain, but should be considered, and it does protect the flight controller.

@matred3538 2 года назад

Thanks Nick for your great videos on micros. My Moblite 7 keeps shutting down completely during flight, and rebooting. Even when the battery isn't low and the quad is close to me. Any ideas what it may be? Thanks. ☺️

@NickBurnsFPV 2 года назад

It could be the battery lead to the quad possibly. Is this a new moblite? If you have dvr of this activity with osd warnings on, that would be another way for me to "diagnose".

@matred3538 2 года назад

@@NickBurnsFPV Many thanks for the reply Nick. It does seem to be a power issue because it just completely shuts down. I shall put all the osd warnings on and record it dropping and check. It only seems to happen with smaller 300mah batteries, so was wondering if it was battery calibration, but don't won't to mess anything up. Thanks again for your reply, it really was much appreciated. Best wishes from the UK Nick. ☺️

@NickBurnsFPV 2 года назад

@@matred3538 Maybe the battery connection is loose?

@matred3538 2 года назад

@@NickBurnsFPV Thanks Nick, yes I may try and swap it out, it's just odd it only happens with 300mah batteries and not larger ones. I may swap it out to an 80mm carbon frame with the same 40mm props. I have a mob6 in a 75mm frame as suggested by yourself to. Thanks again for all your great content, you've helped me loads and saved me a few bucks along the way also. Take care. ☺️

@ProjectMockingbird 3 года назад

55mm is the new 65mm and those Afunta props are still one of the best props ever...and yeah, the Afunta/Hubsan hub design is nice. When I mainly used the old Eachine quad blade props I used to take a drill bit that was just a touch smaller than the main hub and drill the bottom out a little to make a cavity. I'm looking forward to getting the 7...just looking at the PIDs you posted, they look a little high, and that's probably why it's all bouncy on first arm...lotsa juice and a "hot" tune make air mode not happy. I'll be slapping Emuflight on mine for PMB, but both of these look fun. I still like the look of the R3D Shifter whoop frame overall, but can't beat the weight of these. Hopefully they will release the FC with plugs.

@kolibrif8242 3 года назад

I like the idea of getting smaller than 65mm and wonder if size matters in terms of stability if flying in angle mode (Nick seems to prefer 75mm, but he is flying air/acro mode)? What do you think about a brushless whoop smaller 65mm, also in terms of PID settings and use of Betaflight?

@NickBurnsFPV 3 года назад

Not that this is a question for me, the smallest I have flown was 49mm. But no prop guards/whoops.

@ProjectMockingbird 3 года назад

@@kolibrif8242 I flew the brushed Tiny Whoop Nano (55mm frame with 31mm props) and it wasn't as stable as going to 65mm. I would think you'd have to shrink the proportions overall to get the same stability, but then you'd have to have tiny motors, tiny props, etc, just like those old old Cheerson ones I first flew. :P 65 is the sweet spot, but as courses are getting bigger and longer, 75mm feels SOOO nice that I would race that if it were the standard.

@kolibrif8242 3 года назад

I guess I have to try 75mm class ;-) Anyhow, interesting to see how mechanical deficits of smaller whoops can be compensated with a good setup. It seems that it won't get boring anytime soon! @@ProjectMockingbird and @Nick Burns Thank's a lot for sharing your findings!

@chrisgicky2215 3 года назад

You have a very nice house man :)

@cinialvespow1054 3 года назад

will the final shiopped props be new biblades or is it the hq 4 blade prop cut down to 2 blade

@NickBurnsFPV 3 года назад

they will be the hq biblades like in this video.

@cinialvespow1054 3 года назад

@@NickBurnsFPV thanks

@cinialvespow1054 3 года назад

are the tolerances on the motor shaft holes on the 40mm moblite7 props better than other 40mm props? I bent a motor shaft and wasted a motor by trying to put on and then remove hqprop 40 mm 4 blades, and the newbeedrone 40mm ones. Both far too tight compared to the stock little ones. (was doing mobula 6 mod to 75mm frame and 40mm props) I hope these new 40mm props aren't so tight it's impossible to get them on / off without breaking motors.

@NickBurnsFPV 3 года назад

I have found the props to fit on very tight, not just the HQ props but others as well. I wonder if the shaft is slightly more than 1mm

@cinialvespow1054 3 года назад

@@NickBurnsFPV measuring on my decently accurate digital calipers, the shaft is precisely 1mm, well it's slightly less even. like 0.98. It's harder to measure the prop shaft holes tho. You're saying all the props you know fit on tight with 1mm shafts? I Feel like the little ones that come with the mobula 6 fit on wayyyy less tight than the 40mm ones. They come on and off like nothing compared to 40mm. How are you meant to remove the super tight 40mm props without breaking motors?

@NickBurnsFPV 3 года назад

@@cinialvespow1054 I remove them with my fingers and twisting. I hold the bell with my other hand.

@cinialvespow1054 3 года назад

@@NickBurnsFPV so they fit well enough that you can remove them with your fingers like that? the 40mm ones that broke my motor were so tight, removing with bare fingers was impossible.

@jeffwinder7010 3 года назад

Do you have any extreme 'Max' flight times for the mob7lite? Is 10 mins achievable with a larger battery and conservative flying?

@NickBurnsFPV 3 года назад

I don't have any testing I have done, I think 10min might be achievable with a 800mah battery and smooth flight. I am not sure I have seen an 800mah 1s thought, could be out there and I wonder if it would natively fit.

@Indy64738 3 года назад

Hi nick, cool video!!! My moblite7 is flying great, but I experience slight vertical lines when motors are running... any idea? Anyone? Besides that, it’s like jumping when I take of, like yours... and I noticed one props isn’t starting as soon as the others and I have some kind of runaway or runsomething message on the OSD... did you solve that?

@NickBurnsFPV 3 года назад

The jumping on arm, could possibly be solved by lowering the idle. The runaway could mean there is some thread or other debris in the motor, generally that is fairly consistent issue, yours doesn't sound consistent.

@Indy64738 3 года назад

@@NickBurnsFPV thanks for your answer. This quad is a headache... Light vertical stripes and noise when motors are spinning One motor spin later than the 3 others (but not with beta flight) and not all the time Runaway message from time to time... I resolder the motor, unmount it, clean it, flash the esc, flash the FC... nothing work... And besides that after taking off it still flies great... never seen all that with any of my whoops.. Thanks anyways...