Mobula6 ELRS now with ULTIMATE RANGE! 😲🤔

Подписаться 61 тыс.

Просмотров 25 тыс.

50% 1

🛒 Happymodel Mobula6 ELRS
PD - bit.ly/3tU1aAS
BG - bit.ly/3mW8dHt (use code BGAlbertKim for discount)
MF - bit.ly/2WGGY9s (use code ALBERTKIM for discount)
XT - bit.ly/3h3F3ml
AX - bit.ly/3kXNMHA
Green Frame Only - bit.ly/3jJYDpt
*Both BG and MF should have stock now.
ELRS F4 2G4 AIO FC (2.4ghz version)
RDQ - bit.ly/3v6RMsr
PD - bit.ly/2TOasAj
XT - bit.ly/2T5iHHX
BG - bit.ly/2THHxxH
MF - bit.ly/3x6lIGH
ELRS 900mhz AIO FC (both 915mhz and 868mhz)
BG - bit.ly/3cmf6fs
XT - bit.ly/3clN1F1
MF - bit.ly/3coN3vH
🔋 Battery - amzn.to/3yHhgym
🎬 Flights Full Screen - • Mobula6 ELRS DVR Flights
🍿 ExpressLRS Playlist - bit.ly/370CYSH
🎓 I bought the drone, now how do I set it up?
Watch this - • How to set up ANY BNF ...
Binding is super easy. Hit the bind button in Betaflight configurator,
hit the bind button in the ELRS Lua script. Or you can use the UID
from you binding phrase in the CLI.
The built-in RX on these AIO FCs can only be updated with a Betaflight
firmware update. Version 4.3.0 nightly is currently installed on these.
See my ExpressLRS playlist for more information - bit.ly/370CYSH
🍿 Mobula6 Review - • Happymodel Mobula6 65m...
🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks!
💲 If you enjoy my content, please support my channel through these links
Patreon - / albertkim
Amazon - amzn.to/3zq84zp
RaceDayQuads - bit.ly/RDQ-BF
Pyrodrone - bit.ly/3Bfo3BP
Banggood - bit.ly/3imXlie
Airblade - bit.ly/3ilYVRr
NewBeeDrone - bit.ly/3BhFdPu
Makerfire - bit.ly/2VGI3Kg
Aliexpress - bit.ly/3im17IF
XT-XINTE - bit.ly/3inl7KQ
HGLRC - bit.ly/HGLRCBF
RekonFPV - bit.ly/3BagxIq
BETAFPV - bit.ly/2Ui1Pic
Diatone - bit.ly/3z9y01W
Flywoo - bit.ly/3exnkSJ
Caddx - bit.ly/3etIVLN
Insta360 - bit.ly/2VRDNe5
PayPal - paypal.me/marblekit
👉 Old gear for sale here - bit.ly/AlbertGearFS
👉 Follow me on social
🐤 / albertkim
📸 / marblekit
😀 / albertkimrc
🛒 Check out my Amazon store FAVS - amzn.to/3zq84zp
🎧 Music I Use - bit.ly/AKSoundStripe (use code ALBERTKIM for 15% off)
💲 Banggood Coupons
Drones6 6% off at this link - bit.ly/2ZYjB8c
Parts8 8% off at this link - bit.ly/2ZTES38
Toysho 11% off for new customers here - bit.ly/2FsSqJy
▼ Latest Tutorials
Betaflight 4.1 Upgrade Guide - • Betaflight 4.1 Easy Up...
Diagnose Motor/ESC Issues - • How to Diagnose a Moto...
Basic BNF Drone Setup - • How to set up ANY BNF ...
How to bind SPI receivers - • Say Goodbye to the BIN...
RPM Filter Quick Start - • RPM Filter Quick Start...
▼ RC Gear (Daily Drivers)
Jumper T-Lite - bit.ly/2MGBIxs
Crossfire Nano TX Module - bit.ly/2YWSQSe
Skyzone SKY04X Goggles - bit.ly/Skyzone04X
Foxeer 15cm Antenna - bit.ly/2FRWVkM
Triple Feed Patch Antenna - bit.ly/2P1wMyq
Best Charger - amzn.to/32QgQck
▼ Tools
3D Printer - bit.ly/3f62poi
Awesome & Cheap Tool Kit - bit.ly/2U2CS4G
Electric Screwdriver - bit.ly/2OBa9k3
Cloth Tape - amzn.to/2JpCx5U
Soldering Station - amzn.to/2Pn5J1v
Portable Soldering Iron - bit.ly/2WybP2w
63/37 Solder - amzn.to/2De9rsz
Smoke Stopper - bit.ly/2Zyj680
▼ My Favorite Micro Drones
Eachine TWIG HD - bit.ly/2o0EWPF
HM Larva-X - bit.ly/2KV6ihJ
GEPRC Cygnet CX3 - bit.ly/2TUvFUm
HM Mobula6 - bit.ly/2s13CKn
GEPRC Phoenix 2.5 - bit.ly/2TRpobW
Diatone GT-M3 - bit.ly/2TVaykL
▼ Camera Gear
Sony RX100 Mark V - amzn.to/2xpZk0c
DJI Osmo Pocket - amzn.to/2Q5xGiv
DJI Osmo Action Camera - amzn.to/2W2Btvr
GoPro Hero 8 Black - amzn.to/2VRksqN
GoPro Hero 6 Black - amzn.to/2XwJXNN
Insta360 Go - bit.ly/3e5ZLhu
Insta360 ONE-R - amzn.to/2MefTS9
Galaxy Note 20 Ultra - amzn.to/3b1f8Hq
▼ My Camera Drones
DJI Mavic Mini - amzn.to/2NLF7Zm
DJI Air 2S - amzn.to/2UosklW
💰 d o n a t e
Donate via PayPal - paypal.me/marblekit
Bitcoin - 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum - 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin - LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8
👉PLAYLISTS
FPV Camera Reviews - bit.ly/2Nb9WIh
Micro Drone Review - bit.ly/2O2FTOH
Frame Review - bit.ly/2O48KSU
Quadcopter Builds - bit.ly/2O55ypY
Tutorials - bit.ly/2NYJy01
Haul Time - bit.ly/2O2Hkwz
We are an Amazon Associate and your purchases from our affiliate links help support this channel.

Наука

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 171

@AlbertKimTV 2 года назад

🛒 Happymodel Mobula6 ELRS PD - bit.ly/3tU1aAS BG - bit.ly/3mW8dHt (use code BGAlbertKim for discount) MF - bit.ly/2WGGY9s (use code ALBERTKIM for discount) *Both BG and MF should have stock now. ELRS F4 2G4 AIO FC (2.4ghz version) RDQ - bit.ly/3v6RMsr PD - bit.ly/2TOasAj XT - bit.ly/2T5iHHX BG - bit.ly/2THHxxH MF - bit.ly/3x6lIGH ELRS 900mhz AIO FC (both 915mhz and 868mhz) BG - bit.ly/3cmf6fs XT - bit.ly/3clN1F1 MF - bit.ly/3coN3vH 🔋 Battery - amzn.to/3yHhgym 🎬 Flights Full Screen - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vR34qsQFRlM.html 🎓 I bought the drone, now how do I set it up? Watch this - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-19i8ob7u3rE.html Binding is super easy. Hit the bind button in Betaflight configurator, hit the bind button in the ELRS Lua script. Or you can use the UID from you binding phrase in the CLI. The built-in RX on these AIO FCs can only be updated with a Betaflight firmware update. Version 4.3.0 nightly is currently installed on these. See my ExpressLRS playlist for more information - bit.ly/370CYSH 🍿 Mobula6 Review - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dQ5zcVzxO5E.html 🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks! 💲 If you enjoy my content, please support my channel through these links Patreon - www.patreon.com/albertkim Amazon - amzn.to/3zq84zp RaceDayQuads - bit.ly/RDQ-BF Pyrodrone - bit.ly/3Bfo3BP Banggood - bit.ly/3imXlie Airblade - bit.ly/3ilYVRr NewBeeDrone - bit.ly/3BhFdPu Makerfire - bit.ly/2VGI3Kg Aliexpress - bit.ly/3im17IF XT-XINTE - bit.ly/3inl7KQ HGLRC - bit.ly/HGLRCBF RekonFPV - bit.ly/3BagxIq BETAFPV - bit.ly/2Ui1Pic Diatone - bit.ly/3z9y01W Flywoo - bit.ly/3exnkSJ Caddx - bit.ly/3etIVLN Insta360 - bit.ly/2VRDNe5 PayPal - paypal.me/marblekit 👉 Old gear for sale here - bit.ly/AlbertGearFS 👉 Follow me on social 🐤 twitter.com/albertkim 📸 instagram.com/marblekit/ 😀 facebook.com/albertkimrc

@spectregraph3d 2 года назад

I dont see bind button in betaflight.... when i type bind_rx it says command unknown..Binding IDS are the same...frustrated but its probably something im missing

@ChrisParayno 2 года назад

8:52 Makes complete sense now of your experience with the newer motors. Thanks for sharing that even veteran pilots can still struggle with new quads, and each person must make it their own (be it rates, curve mods, etc).

@AlbertKimTV 2 года назад

I guarantee you'll see a bunch of people who are closed minded about anything new (like 90% of the FPV community lately!) and will just sh*t on this motor without considering how it should be utilized. I try to keep an open mind about all these things and take into consideration wider use cases.

@ChrisParayno 2 года назад

@@AlbertKimTV you do you man! Forget about those trolls. I like that you mention about getting used to the motors and your struggle.

@925fpv 2 года назад

Another fantastic review. I can't believe you still have the UR65 in nearly pristine condition! Amazing to see that one again!

@AlbertKimTV 2 года назад

Yeah, I almost gave it away a few times but some annoying guy kept telling me to sell it to him for $10 or $20 and I thought that was pretty lame, blocked him and decided to hang on to it.

@trevorimpulsebuyguy6398 2 года назад

I like how you keep the older quads around for comparisons, its important info, thanks. It's so easy to swap out tiny whoop motors if you dont like these ones and a set of 4 are usually cheap.

@AlbertKimTV 2 года назад

Thanks for watching!

@livingplasma 2 года назад

I've had my custom Meteor65 built with 0603 to save weight and went to 0802 after. I noticed the same thing with the higher throttle being needed and set a custom curve to compensate but I also felt it was slightly less responsive to bursts of throttle. The smaller motors we're also more fragile, the top and side of the bell kept separating in harder crashes. My only experience with 070X motors was years ago with an Eachine and that thing was too current hungry for the batteries I had at the time.

@AlbertKimTV 2 года назад

Yep, same observations. I do think there is still a place for additional motor sizes for different types of flying. I imagine some races being under 2 minutes but more like drag races with all out speed. For that kind of race, the 0702 will beat the 0802 motor. However, I also think the 0702 motor needs to be on something lighter to take full advantage of the motor size. The point is, we need other sizes so we get more variation is racing styles. It's all the same right now. 🥱

@valden 2 года назад

Thanks for covering these motors albert. While they may have missed the mark with this setup, I'd sure be interested in seeing how 0702 would do with biblade 40mm props and at 19-20k kv on a moblite 7 type setup.

@AlbertKimTV 2 года назад

Yeah, I'm sure someone else will find a more optimal setup than this.

@abertheham 2 года назад

I think those motors would be interesting to see on an ultralight mob6 lite or similar…

@fairlyfunctional2236 2 года назад

i built a tiny whoop with 0703's over a year ago and it didn't fly as well as the 0802's either.nice video.

@AlbertKimTV 2 года назад

😎

@jlarson42 2 года назад

Great review and explanation of the difference between the old and new model. I didn't think the gram in savings would be enough to make up for the smaller higher kv motors. I think it would be interesting to build my own with 802 19,000kv motors. A good entry into elrs for me. Happy flying Albert. 🤓

@AlbertKimTV 2 года назад

Thanks for watching!

@lancelotlalla7561 2 года назад

I'm doing one with 0802-19000 kv motors,75mm frameand 650mah.

@jlarson42 2 года назад

@@lancelotlalla7561 I'm really happy that size and kv for my whoop. 👍🤓

@lancelotlalla7561 2 года назад

@@jlarson42 I finally finished it and it fly awesome and around 5mins flight times.

@frankcastillo8869 2 года назад

Another great review and thanks for not hyping up the motor like all the shill channels will. You gave some really good perspective on the 0702 motor compared to the 0802. Keep up the good work!

@AlbertKimTV 2 года назад

I appreciate that!

@turboomni848 2 года назад

Ahh the ole URUAV UR65! I still fly mine and the reason I keep flying it is I swapped out those motors for the 19000kv Mobula6 motors plus the 3 blade props also used on the Mobula6. It transformed the quad for the better in all areas especially the run time. If you have a UR65 doing nothing throw some Mob6 motors on it and have fun. Looking at the specs of the Mobula6 ELRS you would think they were catering towards a whoop version of long range with it's dipole vtx antenna and elrs + the 2 bladed props but then it grinds to a halt when I saw the KV and the size motors. Short flight times negate all the electronic advancements.

@AlbertKimTV 2 года назад

Yep, that is the most popular upgrade for the UR65. I kept mine totally stock so I can do comparisons as newer models come out. Amazing how much better the new models are compared to the older ones.

@DoktrDub 2 года назад

I didn’t know these motors would be such a noticeable difference over the previous model versions, interesting, I’ll keep this in mind when mine arrives by post :)

@AlbertKimTV 2 года назад

😁

@i.v.2824 2 года назад

I dont really feel like it's an apples to apples comparison with those motors beings they have different props. Can you put a tri blade on the 0702 or is that too much amp draw? Also, is that green frame just a different color than the classic white or do you think it's more durable?

@AlbertKimTV 2 года назад

Three blades will draw too many amps for that motor. The frames seem the same in terms of durability.

@MCsCreations 2 года назад

Awesome flying and review, Albert! 😃 About the older Mobula 6, do you think it has a full free UART to put a ELRS receiver in it? 🤔 Anyway, stay safe there with your family! 🖖😊

@MCsCreations 2 года назад

@@DonJohnsonFPV Sweet! Thank you! 🖖😊

@AlbertKimTV 2 года назад

Yes, it has the pads on the underside of the board. You should be able to see the silkscreening on the bottom.

@ChristKrew-Rev1.8 2 года назад

Hey Albert... the kid an I love our 2.4ghz elrs versions... however I am have having a heck of a time with the batteries. For some reason they are not charging all the way. Bought some new gnb 350mah ones and the same thing is happening. Do you think it could be the connectors on the batteries? was thinking of upgrading the connectors to the betafpv ones but not sure. We get at least 2 to 2.5 minutes which gives us a few laps around our house track but this is the only thing bugging me lol.

@AlbertKimTV 2 года назад

So the batteries are new but they don't charge up all the way? How much do they charge up to? 4.0v? Less? What charger are you using? Maybe that charger went bad?

@ChristKrew-Rev1.8 2 года назад

@@AlbertKimTV on average 4.14-4.10 and on storage right around 3.79 with some going up to 7.81 The charger is the c240 duo

@ChristKrew-Rev1.8 2 года назад

@@AlbertKimTV I think the battery checker I use opened up the connectors a little to much on a a few of the batteries. That could be it as well. Storage charged a rdq 1s 525mah with ph2 connector and it is right at 3.80 and I have had this battery sitting for over 8mo. You are right on the happy model batts as they are not doing well lol. Again... this is why I said your video's are perfect. These little quads are awesome none the less as we fly in stab mode and have a great time zipping around our house.

@zkazzay 2 года назад

Best thing i made recently was changing from crsf to ELRS. loving the range and the 500hz package rate on 2.4Ghz.

@AlbertKimTV 2 года назад

😎

@VinoUdaBestOne 2 года назад

Just bought the original mobula 6 and was going to add the small crossfire to it. Does it increase the range that much? Bought it more for the house anyway but just wanna know incase I do go out with it I'll have a idea of the range I'll have. And should I even worry about adding it?

@ScreamGreek 2 года назад

Was wondering if you had tried different props yet. Do you think a 3 blade prop would restore some authority and familiar yaw characteristics?

@AlbertKimTV 2 года назад

Yeah, not worth it. Flight time went down to about 1 minute.

@ScreamGreek 2 года назад

@@AlbertKimTV jeez!!! With 1s flight times being on the rise…bummer. All they really needed to do was add express Lrs to an already popular platform…

@ndtran9913 2 года назад

Hi, could you do a comparison or comments between Mobula6 ELRS and Meteor65 ELRS, Meteor75 ELRS in terms of flying time, VTX signals etc. for newbie to decide. Thanks.

@AlbertKimTV 2 года назад

Flying range is going to be the same for ELRS. I've gone out more than 500m on just 25mW output power. But that range is meaningless because you can't fly long enough to go out far enough to failsafe it because you are limited by battery life. This Mobula6 ELRS gets about 2-2.5 minutes as you saw in this video. I don't have the Meteor65 ELRS but I think that one will get more flight time and about 3-3.5 minutes. I got about that much with the Beta75. The BETAFPV whoops with ELRS now have 350mW VTXes in them. So more video power than the HM ones at 200mW but 200mW is still more than enough because you can't fly far enough away on the small battery.

@vanlifefpv6340 2 года назад

There's some pretty dumb comments here. You can tell they didn't watch the video at all.

@AlbertKimTV 2 года назад

Eh, that's typical... what can anyone do about that???

@925fpv 2 года назад

Average IQ of an FPV pilot is probably around 50. Most don't know how to read or write!

@whooperfpv 2 года назад

😂

@Xray-Romeo 2 года назад

Appreciate the way you go into detail about flight difference depending the batteries used and also the old vs new comparison. Really helps when making a purchase decision. Do you think ELRS will become the new standard?

@AlbertKimTV 2 года назад

ELRS will be on everything soon. It's cheaper, has better range, and is easier to integrate than any other receivers out now. It's only a matter of time.

@trevorimpulsebuyguy6398 2 года назад

@@AlbertKimTV I bet Crossfire hates this

@psyman9780 2 года назад

ELRS is already pretty damn close to that stage. It may not be on a ton of AIO boards, but the receivers themselves are already small enough that it's a non-issue for most if you're able to solder. The only thing holding ELRS back is the stock of RX and TX modules tbh.

@925fpv 2 года назад

I hate crossfire and anything from TBS. All the TBS fanboys can go suck my d...

@dubzsquaredfpv7171 2 года назад

When Happymodel announced this BNF on Facebook, Angry Don was quite unhappy. I think he recommended to them that they use the Diamond F4 (moblite) FC. I'm not sure how he felt about the kV, but he wasn't happy about this FC because of the short flight time. I think sometimes HM picks and chooses which of his suggestions to use and which to ignore.

@AlbertKimTV 2 года назад

Yeah, I didn't see that. I did think the pairing seemed a bit odd so it needed an explanation from Angry Don. Thanks for the info.

@matthew04101 2 года назад

@@AlbertKimTV i think Angry Don makes 14g whoop. and at 14g, you don't really need 0802 motors.

@bottledg 2 года назад

I think I would just swap out the AIO on my Mobula6 and keep the 0802 motors. I would then compare the bi-blades to the tri-blades to see which gives me the better performance.

@AlbertKimTV 2 года назад

😎

@Ryet9 2 года назад

Wow, that Runcam nano3 DVR looks soooo much better than the same one that comes with the Moblite6/7... strange O_o ...maybe mine is just a bit banged up

@AlbertKimTV 2 года назад

It's the DVR recorder. You use Fatshark, right?

@Ryet9 2 года назад

@@AlbertKimTV Yeah I do, amazing the difference a dedicated DVR makes - cheers for the reply & all you do for the community

@donaldwaddel4600 Год назад

How do you select the output VTX channel? Is it done through Beta Flight? TIA

@AlbertKimTV Год назад

Yes, Betaflight smart audio.

@aliveathome 2 года назад

Great info, thanks for the review. Have a lot of 1s 450-batteries lying around. Would that be a bad choice for this one in terms of weight and performance or is the 300mah the best alternative after all?

@AlbertKimTV 2 года назад

Too heavy, don't bother. The performance will not be good. The flight time will only increase by a little anyway.

@aliveathome 2 года назад

Ok, I understand, 300 it is then...Thanks for the answers!

@VVhatchagunnado 2 года назад

I just bought some of those gates. Should be here tomorrow. (Inflatable)

@AlbertKimTV 2 года назад

😎

@spectregraph3d 2 года назад

how do you bind the 915mhz model to happymodel es900tx?? i have both flashed but no clue how to bind

@AlbertKimTV 2 года назад

Info is here... www.expresslrs.org/1.0/hardware/spi-receivers/

@illdogfpv6888 2 года назад

I want that green frame!

@AlbertKimTV 2 года назад

😎

@AlbertKimTV 2 года назад

Link to the green frame has been added to the description

@illdogfpv6888 2 года назад

@@AlbertKimTV OMG! Thank you so much! I looked on my own and couldn't find it! I hope it is an affiliate link, thanks again 😊

@yannickg6904 2 года назад

I have a feeling that once the chip shortage is over, ExpressLRS may replace SPI RXs on all AIOs.

@yannickg6904 2 года назад

@@661FPV I know, what I meant to say is that they will probably become the norm going forward.

@AlbertKimTV 2 года назад

It's good to have many options and see the tech progress forward.

@SlipperyBannana 2 года назад

Damn I want a green frame like that.

@AlbertKimTV 2 года назад

😁

@pksteffen 2 года назад

Interesting. Lower KV might be the sweet spot for most but I’m sure they tested it and landed there. Someone like AyyyKayyy could rip it at that KV no doubt. I’d be curious how long the flight time is on Nitro Nectars.

@AlbertKimTV 2 года назад

I wasn't able to get the nitro nectars to plug in with this setup. It need a longer battery lead.

@360vroomers 2 года назад

Argh. I wish they stuck with 802 and triblade. I think it would have been useful to a larger percentage of pilots.

@AlbertKimTV 2 года назад

For the ERLS setup the 0802 would make more people happy but it's easy to make that setup if you already have the mobula6 and just add in the AIO FC. These 0702 motors would have been better on an updated moblite6 instead.

@whooperfpv 2 года назад

@@DonJohnsonFPV Angry Don please share the optimum setup for the new 0702 motors

@adrianau4246 2 года назад

Will this bind with jumper t-lite with ES24TX-lite module with 2.4 model on both drone and module?

@AlbertKimTV 2 года назад

Yes, as long as the firmware version is the same on both sides.

@adrianau4246 2 года назад

@@AlbertKimTV I’ve heard this got some prop wash issues that true? Would you rather this mobula6 w elrs or the crux35 4s w elrs ?? Or both… I know the crux35 is in the middle of whoop & normal sized drone

@daily6633 Год назад

Is this HD zero why does the DVR look so good

@AlbertKimTV Год назад

No, it's analog... the DVR is pretty good on the SKY04x goggles...

@daily6633 Год назад

@@AlbertKimTV LETS GOOOOO. I got my a pair of sky zones. What does everyone use fat shark looks so bad.

@t0t0FPV 2 года назад

Angry Don is not more anymore in happymodel team

@AlbertKimTV 2 года назад

www.happymodel.cn/index.php/pilots/

@FPVisnotacrime 2 года назад

@@AlbertKimTV Not there anymore.

@SyarifFPV 2 года назад

I can only watch and wow... 👍👍👍 because right now i just have jumper tlite playing with freeride simulator. I have to save so I can buy an FPV drone and googles. 😃✌

@AlbertKimTV 2 года назад

You can do it!

@johnk8825 2 года назад

Interesting observation of the difference between the two motors.

@AlbertKimTV 2 года назад

You're gonna see a lot of "expert" pilots on Facebook make claims it's the same as the 0802 and just lighter to sell on their affiliate links. Just you wait and see... 🤣

@judahbeatz5640 2 года назад

I like the quad and your videos

@AlbertKimTV 2 года назад

Thanks! 👍

@drunkskunk00 2 года назад

So is it as much fun? The thing about the Mob6 is it's always fun, even if there are better quads available to fly. Is this new version as much fun, or have they traded fun for higher performance?

@AlbertKimTV 2 года назад

"fun" is totally subjective... what is fun for you isn't the same for everyone else.

@925fpv 2 года назад

I disagree the mob6 is "always fun"

@valterszvirgzdins9319 2 года назад

what goggles do you use?

@AlbertKimTV 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MVKVP04Y-fk.html

@PropsAndVolts 2 года назад

I just switched my Mob6 to a 75mm frame and 40mm. I guess it’s more like a Mob7 now hahaha ELRS is definitely the big selling point for this new drone, the price of ELRS is so appealing. I’ve got a Tango 2 and Mambo, but man now I kinda just want to use ELRS instead cause it’s so awesome how it’s integrating into FCs like this.

@AlbertKimTV 2 года назад

😎

@RubyS.1 2 года назад

I'm so cheap. I cannot spend 4 bucks on tiny byblades. Prefere to cut 2 blades off the cheap hq quad blade props. I do like how much more zing the byblades have but not the grip.

@AlbertKimTV 2 года назад

🤣

@ThePieSnatcher 2 года назад

2.4ghz elrs or 915mhz elrs

@AlbertKimTV 2 года назад

😎

@psyman9780 2 года назад

I'd go with 2.4 GHz just because you have the option of the ceramic antenna for micros (especially with the HappyModel AIO board) and a higher refresh rate for freestyling/racing. Both 2.4 GHz and 915 MHz have "too much" range for most people, but 915 MHz should have more range. Wezley Varty got to 35 kilometers without fail-safing on 2.4 GHz @ 100mW & 250 Hz, was limited by his video link.

@dronereviewman9580 2 года назад

these are all whoops I would love to have in my life!!! Have to love this channel

@AlbertKimTV 2 года назад

😍

@DeeMenace 2 года назад

Angry Don I love that guys channel , He flies the shit of his quads. This channel is also awesome :)

@AlbertKimTV 2 года назад

😎

@carlosr.2027 Год назад

which would you recommend the mobula6 elrs or mobeetle 1s elrs ?

@borg1874 2 года назад

How does this compare to the Eachine TrashCan, that's my micro quad I fly.

@AlbertKimTV 2 года назад

That's a lot bigger and has more power. Trashcan is like race car compared to this being a motorcycle.

@gdrummer3929 2 года назад

Any idea why the RSSI in the configuration page under the arming flags would randomly drop out every half second or so? I’m using happymodel es24tx with a Radiomaster tx16s max.

@AlbertKimTV 2 года назад

There's a lot of possible reasons. One common one is that your transmitter is too close to the quad and it's going into failsafe briefly.

@gdrummer3929 2 года назад

@@AlbertKimTV I will try again from a distance. Thank you for your response I appreciate it.

@dubzsquaredfpv7171 2 года назад

Please test it with the NN Gold batteries or the GNB 1S 380mah (purple label). Or even the new Tattu 1S 300mAh w/ BT2.0. I'm curious if it does a little better on flight time with those batteries. In my experience, those red GNB 300's are just slightly less bad than the ones Happymodel includes with the quad.

@AlbertKimTV 2 года назад

Battery lead too short to use the NN lipos. I don't have the other ones you mentioned.

@kennethdavis1628 2 года назад

is this the same FC that HappyModel sells for whoops. I upgraded my mob6 with their ELRS spi board. Had problems because ELRS on the HappyModel is really not supported in BetaFlight and you have to use a branch. The ELRS doesn't have WiFi, nor does BF 4.2.9 support passthru for ELRS. So, basically, I'm stuck until BF 4.3. Also, the vtx on the standalone board, I believe went up to 200 mw, while the original is 25 mw. Couldn't really make a complete circle around my house without vtx dropping out with 25 mw. Thanks for the update.

@AlbertKimTV 2 года назад

This is the same board I showed in the video. All the SPI based ELRS receivers are only supported via a Betaflight firmware update and that is different from the rest of the ecosystem. You have to use configurator 10.8.0 to setup the board properly. The VTX on this new board will go up to 200mW if you use the correct configurator. This just requires a little bit of a learning curve to figure out and you should expect new AIO FC boards with SPI based ELRS to operate the same way. They don't plan on changing this so it would be best to learn how it works so you can use it to it's max potential.

@kennethdavis1628 2 года назад

@@AlbertKimTV ty. yes, this is basically a no-brainer for HappyModel. I couldn't fly acro-mode prior to getting my Mob6, so it will always have a special place for me.

@betitaelfica2 2 года назад

Do you mean that the original mobula6 vtx 25mw are better than the new board at 25mw?

@kennethdavis1628 2 года назад

@@betitaelfica2 if you are responding to me. This is def better than the original board, just a pain right now updating it. ELRS over SPI is relatively new and RELEASED software has yet to catch up.

@sitake8704 6 месяцев назад

Kim, How to connect mobula 6 elrs 915hz to my radiomaster tx16s, I'm using happymodel es900TX. Pain in the ass...hahaha... Please help me...

@AlbertKimTV 6 месяцев назад

Assuming you have a compatible module on the radio with the same firmware series, you can just follow the instructions on this web page... www.expresslrs.org/quick-start/binding/

@sburnham3 2 года назад

Might have to build our own to get what we want, old vs new, but nice to see happymodel really committing to the ELRS

@925fpv 2 года назад

Hope they stop offering TBS options and only ELRS. F* those TBS fartboys!

@AlbertKimTV 2 года назад

I hope they continue to offer a variety of different part options for those of us who want to do custom builds and I hope they ignore all those haters who just hurt themselves by complaining every time something new comes out.

@sburnham3 2 года назад

@@AlbertKimTV like that you really put in the time to figure out how to fly it.

@samseazyfpv 2 года назад

I think i should change to elrs

@AlbertKimTV 2 года назад

😎

@kuzyatron 2 года назад

I have a sneaking suspicion that 0702 was chosen to make up for the weight increase from the ELRS FC. 0802 became popular because of the much better yaw authority compared to 0603. 0702 is a step backward

@AlbertKimTV 2 года назад

Read some of the other comments and you'll see the real reason.

@kuzyatron 2 года назад

@@AlbertKimTV Upon reviewing other comments, it sounds like they picked 0702 just because it's a new product they happen to have right now?

@kuzyatron 2 года назад

I do appreciate having more choices on the motor size, and 0702 will be great for lighter builds like Angry Don's 14g whoop. For this particular application, less yaw authority and less responsive throttle sound like a suboptimal choice, I guess with my flying style

@matthew04101 2 года назад

@@kuzyatron 14g whoop sounds great. when and where can i get one ? thanks.

@whooperfpv 2 года назад

Was planning to buy this last aliexprs sale as I thought it would have more flight time. And I can use the FC for a LR 1s build.. But the motor made me hesitate. Good there’s already a review of this model 👍🏼. Will skip this for now.

@AlbertKimTV 2 года назад

👌

@MrJoris666 2 года назад

estimated Delivery on Oct 13th-23rd,2021? Ordered from Makerfire

@AlbertKimTV 2 года назад

According to their Facebook post, they should have them in stock. I suspect they haven't updated their back-end system to show correct information on ordering. You'll get it sooner than that.

@dennislobos 2 года назад

Range flight?

@AlbertKimTV 2 года назад

Let's see... I can go about 300m in one minute then turn around to fly back for one minute then my battery is dead. 😎 Using ELRS on this little guy is not for long range but for the ultra-low latency link. On something else with more battery like, I've seen these little SMD antenna based setups go up to 3KM. If you need range, you need to get the ones with the standard antennas. Those go up to 30-40km in the right setup.

@925fpv 2 года назад

Another dumb question about range? Geez, what's the obsession over range?

@Rayzah_Richie 2 года назад

I prefer the 0802 motors....

@AlbertKimTV 2 года назад

Most people do. It's good to see other options available for those who want something different.

@williambarlow4804 2 года назад

I didn’t buy this cause of the smaller motors

@AlbertKimTV 2 года назад

👌

@farissyahmi7972 2 года назад

Light and cheap

@AlbertKimTV 2 года назад

😎

@catcater4004 2 года назад

You can use this tiny Whoop for Longrange😂

@robert_g_fbg 2 года назад

And your spotter can use a telescope 🔭

@AlbertKimTV 2 года назад

Not sure how far you can go in one minute...

@robert_g_fbg 2 года назад

@@AlbertKimTV maybe cliff diving? Gravity assist ftw 😉

@vanlifefpv6340 2 года назад

This is not for long range. Racers will love the low latency on the control link though.

@925fpv 2 года назад

whoop and longrange is just stupid

@ProjectMockingbird 2 года назад

Man, if only there were KNOWN Whoop experts out there that have tested almost every combo and could tell every single manufacturer EXACTLY what to build for almost any Whoop application...maybe someday we'll have those experts. ;)

@AlbertKimTV 2 года назад

I would absolutely hate a world where only a few people and their "expert" opinions limited my options and choices for parts and models. Just because something isn't the best for those few experts doesn't mean those things should not exist for people with different preferences. I hope all these companies will continue to make an even larger variety of parts and models despite the complaints of the "experts".

@ProjectMockingbird 2 года назад

@@AlbertKimTV The problem isn't that there are different opinions and knowledge being applied the majority of time in Whoops and micros. The problem is that little knowledge and testing is applied to a lot of Whoop products and we almost get good products that would be a great base for a lot of diversity in the market. You're confusing experts making niche products versus using those same experts to make base products that could be a lot of things from a simple BNF for a beginner to a niche product for the extremes.

@nischalnischal1 2 года назад

Its a tough decision to be honest and to tell the truth especially when the company profits(happymodel here) depends on such reviews! Honor your courage and honesty!

@frankcastillo8869 2 года назад

Why he doesn't get more supporters than shill channels is beyond belief. I guess people believe the lies and double down on resisting the truth. It's sad to see.

@AlbertKimTV 2 года назад

There are companies who don't work with my anymore because they only want shill reviews. RunCam is one of them.