Molding & Casting Small Urethane Resin Parts with two part silicone molds

Подписаться 119 тыс.

Просмотров 292 тыс.

50% 1

How to copy a simple 3D object. Create a two part silicone mold then cast a resin part into the silicone mold to make a duplicate copy part of the original.
Never miss a video! Enable '🔔' All Notifications!
bjbenterprises.com
Museum Wax: amzn.to/2X3igQJ
Vibrating table: amzn.to/38oanbj
Smooth on Silicone for molding: amzn.to/2CMQmhP
Simple Resin for casting: amzn.to/2P1knjA
CPS 10 CFM vacuum pump: amzn.to/3jM1ig9
Black Skintx Latex gloves: amzn.to/3jQuwKH
Petroleum Jelly: amzn.to/2EcR5t0
Naphtha: amzn.to/3aK4sgs
Loctite super glue: amzn.to/3nXxPkx
Zap kicker: amzn.to/3qEuqJM
Elmers 16oz white glue amzn.to/38Gl4TJ
Urethane resin: amzn.to/3iYisah
3M 6200 respirator: amzn.to/3gHIfAR
3M 60923 filters 2 pac: amzn.to/2EGVm8w
3M 7162 Full-Facepiece Spray Paint Respirator: amzn.to/2EKYkcb
Digital scale: amzn.to/3pvX66N
Dewalt drill: amzn.to/3fuFtRH
Chavant modeling clay: amzn.to/3ltYmZ2
Pressure tank heater: amzn.to/3Ppl9AJ
As an Amazon,Bambu,Blick Associate I earn from qualifying purchases.
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
PANASONIC LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Manfrotto 244 Variable Friction Magic Arm: amzn.to/2X7YwIT
Manfrotto 035RL Super Clamp: amzn.to/3dbPWyf
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
.03 styrene white www.ebay.com/itm/401085113497
.03 styrene black www.ebay.com/itm/401511376750
.06 styrene black www.ebay.com/itm/401640731374
.06 styrene white www.ebay.com/itm/401700315280
Luer lock bottles with needles
www.ebay.com/itm/402687721827
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
you can follow me on:
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign @botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com

Хобби

Опубликовано:

7 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 218

@Immortal_Mentor 2 года назад

I LOVE that you show the fails, it helps us so damn much in learning the process.

@johnnyshinnichi1785 Год назад

Yes, it's nice to know even pro's make mistakes.

@EricStrebel Год назад

Yup, all the time, failure is the gateway to success

@qwertyzxaszc6323 2 года назад

Thank you for showing us when things go wrong. Because things do go wrong. It’s good to show that even professionals encounter issues so that beginners do not get discouraged when things go wrong.

@EricStrebel 2 года назад

Embrace your failures you should, the path of wisdom it will lead

@bjbenterprises 2 года назад

Nice work again Eric. Showing the fails with the success is something missing in many of the tutorials out there. It's a great way to learn how and why things go wrong, and how to avoid it again in the future. An interesting thing we've found with WC-85DM rigid clear polyurethane when it comes to moisture sensitivity; you can avoid moisture bubbles if you cast into a heated mold (around 120F/50C) at ambient pressure (no pressure tank) OR simply pressure cast it. You got the benefit of both by pressure casting with heat, so you can create bubble-free parts faster and with much better "green strength" upon demold compared to a room-temp cure. Keep up the good work!

@Nukawin 2 месяца назад

I really appreciate you showing the failed attempts because I'm currently struggling with a project and my fails are killing my motivation to keep trying. So, seeing a video where someone else is failing abit and still trying is inspiring.

@adamsutton9104 Год назад

I think it was Da Vinci who said that a true artist makes their own tools. Looking at what you have in your shop, you are a true artist sir.

@EricStrebel Год назад

Thanks

@kiltedcripple 2 года назад

Thank you for the classy demonstration of "adapt and overcome" or perhaps, as my father's generation might have said, "no use crying over spilt milk"

@EricStrebel 2 года назад

👍

@taunteratwill1787 2 года назад

Who needs "split" milk anyway? 😄

@kiltedcripple 2 года назад

@@taunteratwill1787 I'm sorry, I don't know what you're referring to. 😉

@christopheranderson8275 2 года назад

Legos are best for infinite mold boxes and are reusable.

@24-Card Год назад

I love my lego moulding boxes!

@truck6859 11 месяцев назад

Thanks for the tip.

@1islam1 Месяц назад

@@24-Card ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

@worldsend69 Год назад

I learn so much more from the fails than just the success alone.

@EricStrebel Год назад

To succeed you have to fail a bunch

@drpipe 3 месяца назад

Really appreciate guys like you sharing the knowledge 🙏. I 3d print a lot.. I’m wondering what your views are from small scale perspective?… clearly there would be a lot of time in cad for me to replicate these parts and with potentially not the strength in a single cast product. Just really interesting your perspective and I’m so pleased I found this Real gem… the reality of yes some fail even with best intentions they still go boom pleased you kept them in 💯🙏👌🏻

@AlenHR 2 года назад

I love this. Making mistakes is the key part of learning. I'm glad you are showing us your learning process. I fail all the time, learn from my mistakes, wipe my tears and try again.

@EricStrebel 2 года назад

Don't give up, keep trying until you succeed

@vicyhago 2 года назад

Thank you once again Master for teaching your know-how, for showing possible mistakes and your desire to continue, showing that he who persists wins. A huge hug

@OKeefeist Год назад

Great tip for getting deep blacks

@MrUlybong Год назад

Awesome. I liked you showing the failure part since we learn a lot from the work around.

@maverick744 2 года назад

Love your technique. Gave me some ideas I never thought of .

@MordecaiV 2 года назад

Thank you for showing the hurdles!

@KRGraphicsCG 2 года назад

How interesting that you made a video about this. I'm ordering some urethane resin and casting some parts. And even going to use fiberglass powder as a filler. Even bought syringes

@josephp7174 2 года назад

Thank you for keeping the fails in there!

@annewalker5480 2 месяца назад

Love it! I'd like to make some custom casings for electronics, wanted to get a view on how to make it happen. These tutorials rock. I'm an art student at a science university... I'm sure someone has a pressure pot they'll let me use, haha.

@Tye323 2 года назад

We’ll done! I’ve played your other videos on small part casting a million times. I’ve learned a ton from ya, thanks for making these videos!

@EricStrebel 2 года назад

Your welcome

@KarlOnSea 2 года назад

Very good, and great to see that it doesn't always work first time!

@vibrion121 2 года назад

Again wonderful video Eric! That reaction between ckear and opaque silicon was similar to my problem trying to make fake polyester resin gems: never cured, always sticky

@sametkurt1067 2 года назад

It is really valuable and nice that you add the mistakes you made in production to the video. Well done, you are doing a super job.

@scifimodelsandstuff3211 Год назад

I've never seen this method of high pouring resin from an empty tube. Very interesting and I'll have to try it.

@jesicasilva5569 2 года назад

good evening ... I'm not using my youtube account ... my name is ROBERTO HAAR until I fix it ... but I always do research and see new projects ... I'll try to learn ... despite the language barrier ... thank you very much

@noname-oq7rc 2 года назад

your casting/ resin series rocks😃 I would like to see a version of your apple power adapter made in resin using your 3dp parts. thanks

@ValidPlacebo 8 месяцев назад

Wow I didn't know you could buy a heater for your vacuum chamber I'm just learning now taking notes for when I do my first pour. Appreciate you and your work.

@EricStrebel 8 месяцев назад

Thanks, best of luck.

@appatula Год назад

I remember the first time I used Tin cure on Platinum silicone, ALSO NOTE: the old school Sulphur based clay will cause this same reaction with Platinum cure. I miss the old black tuffy days..........

@user-nd7rg5er5g 10 месяцев назад

This was a very cool and informative video!

@carlospitcher4335 2 года назад

Great video! Thanks!

@garagemonkeysan 2 года назад

Awesome video. Never give up. Never surrender. Parts look great. Mahalo for sharing! : )

@KRGraphicsCG 5 месяцев назад

Interesting use of golf tees to use as a sprue and venting holes. For the pouring vent, definitely use an actual funnel so it will be less mess and the pour sprue will be easier to remove. The funnel shank should be the same diameter as the cental shank of the tee

@psychicspy 2 года назад

You just earned a new subscriber!

@caw2165 2 года назад

I have been trying fore weeks to find the answer to making a mold from a Mustang logo. I am TRHRILLED to have come across this video. I will be watching it several more times while I attempt that mold of the little "Pony" . I subscribed, because I just know I'm gonna finds lots of answers! 😊

@EricStrebel 2 года назад

Excellent

@spoonbender123 Год назад

You are brilliant. Wish you were my friend. Love this vid so much. Thank you.

@OminousPinapple 2 года назад

I really appreciate the attention to detail and the workplace organisation, it shows a great deal of dedication to the art by having the workspace be very "purpose built" and not just _stuff_ lying around.

@williammurray3125 2 года назад

I did this for a few years. We made a lot of toys as well as some pieces for the Keurig coffee machines. Worst mistake i ever had happen was while pouring a few Chewbacca figures for Hasbro, the resin we used was mislabeled and instead of part a mixing with part B, the same material was in both 5 gallon containers. The next morning, after opening all the pressure pots, i opened up the first mold to find thick gooey resin pouring everywhere. And it took forever to clean all those molds. Chewbacca has a lot of hairlike features that creates a LOT of area to wash out!!!!

@EricStrebel 2 года назад

Funny story

@US-vy8up 2 года назад

I really enjoy when ı ve watched

@namikpashastudio Год назад

wow good work. the details of explanation was great. the fail video show us even experience person sometimes cannot get the results in the first try. thats give me motivation to try in someday.thanks again for the video.

@SuperStevien Год назад

kudos to you... amazing details shows real artistry /\

@ajitkarulkar3719 2 года назад

Nice.. specially you showed... failure as well

@volumeup2714 2 года назад

bravo!!nice worK!!!

@johnhopkins6565 10 месяцев назад

Don't know if it's been mentioned already, but legos make excellent molding boxes.

@abetfelix6843 4 месяца назад

Nice one ❤❤❤

@SantaDragon 7 месяцев назад

Quite nice copys.

@EricStrebel 7 месяцев назад

Thanks

@nathanbarker7686 2 года назад

Thank you for such an informative video on casting such small parts, including the issues you've found. I really need to make parts roughly the same size, if not smaller. Do you think it would be possible to do this without the pressure/temperature chamber that you used on your video? If so, would there be any problems I might face not using it. (some of my parts will be roughly 2mm thickness.) again, thank you for a great video.

@christinoccs 2 года назад

Thx a lot, very revealer video, I´m now your new follower, waiting for more tips & tricks

@scotty6435 7 месяцев назад

This is a minor point but if you laser cut L profiles out of the wood, you would be left with small vertical seams but it would use a tiny amount of the wood material

@arjunyonzan8557 Год назад

Thanks 👍

@dickskinthin9192 2 года назад

I too am an Industrial Designer.

@MichaelT_123 2 года назад

Small idea ... place a transparent label with a text which identify a design (like e.g. QR code) on the top/side/bottom of a mold vessel.

@MJCNCDIY 9 месяцев назад

good

@psychicspy 2 года назад

I use a removable plug inside parts that have thick mold cores. Once the plastic plug is removed, the silicone mold can be folded inwards away from the part to extract the fresh cast part. Remember to replace the plastic plug before casting the next part.

@EricStrebel 2 года назад

Yup, that should work well! I assume you need a bit of mold release on the plug for that to work

@psychicspy 2 года назад

@@EricStrebel Yes. Release is a must. I use spray on silicone.

@Cappurniggas 2 года назад

You should've used compressed air to remove that part. It wasn't "stuck" to the silicone, it was under a vacuum. If you blow compressed air in between the part and the mold, it will release.

@EricStrebel 2 года назад

Perhaps

@diggumsmack2 3 месяца назад

*Quick question from a newb, how come one uses 60psi positive pressure in curing the parts and not vacuum?*

@MzAlicenWonderland 3 месяца назад

I'm wanting to make a stand for a tattoo pen machine out of resin. I need to make a silicone mold of the tattoo pen. What should I cover it with to protect it from damage?

@charliesybert2683 Год назад

Are these molds strong enough to use dozens of times and what can I use to die the resin

@pierrebouteillon 4 месяца назад

Hello. Thanks a lot for this great video. I don't find liquid naphta on the internet. Would you have a name or link to suggest? Thanks.

@MichaelT_123 2 года назад

Very tidy, informative video! Would it be prudent to de-gas the mold box after pouring (1st & 2nd) silicon also?

@EricStrebel 2 года назад

Yes, it's a must, just not shown in the vid

@ubermenschmexa 2 года назад

Your channel is great! I managed to create a mold and duplicate for a small piece of an old Batman figurine I've had since I was 4. There is another piece I want to mold and cast but have no idea how to approach, it is a hollow, 5-sided box. The top side has a round hole and the other four have slots that go from the middle right down to the bottom of said box.

@variouselite Год назад

will probably have to split in half and do in two parts

@amoldjoshi1234 4 месяца назад

I have to create a part. Do you know anyone who can create rubber part for me?

@EricStrebel 4 месяца назад

@amoldjoshi1234 www.botzen.com please attach a project pdf. overview document with you .step file

@dontwonnatell 9 месяцев назад

thanks for sharing. Need to copy keyboard parts of an old Atari 800 and got some ideas how to do it

@EricStrebel 9 месяцев назад

Best of luck with your project, tag me on social media once the parts are finished.

@blowme5150 2 года назад

That's alot more work then I exspected happining?

@nicholasbourgeois6131 Месяц назад

How much do u charge need some mirrors made for a jada toys rc roller and some rims

@psychicspy Год назад

Had the same problem with tin and platinum not playing nice. Really embarrassing infront of a client.

@EricStrebel Год назад

Yeah, I can imagine.

@timroberts69 2 года назад

I've been watching your videos for a couple of weeks now and I am a new sub to your channel. I have learnt some great techniques, thanks for showing what you do. As for the cardboard you use in the laser cutter, is that special craft cardboard or similar? Or is it just normal cardboard from boxes etc? Where do you get it? It looks very handy.

@EricStrebel 2 года назад

Just regular cardboard chip board the back of drawing pads anything should work

@scopeboy66 Год назад

Does this stuff smell when you use it?

@gustavotobon7042 2 года назад

Hello Eric, love your videos. My question is whether neoprene foam rubber tape will stick to silicone rubber when creating silicone molds. Thank you

@EricStrebel 2 года назад

Dunno, test it and find out

@buraksalman9942 2 года назад

great work. so how durable this molded parts for bending and sun or weathering? please explain, important for me. i need to durable resin for using under sun

@EricStrebel 2 года назад

Get a UV stable resin

@jonystube 10 месяцев назад

Hello when you making 3 d print and after you do silicone form -what you use for smooth the surface? did you paint or what can yse ,because lot of matarials is reacting with silicone and not dry

@EricStrebel 10 месяцев назад

Please use the correct grammar when asking questions so that we can understand your question..

@romitchakraborty5408 3 месяца назад

can u make aluminium mould for this instead of silicon, so we can use plastic injector?

@EricStrebel 3 месяца назад

Yes of course that is how volume production works

@pierresteyn3500 Год назад

Awsome work man, i like your key design, could you give me some pointers, on the sizing of the keys, i have currently 6mm and 12mm , is that sufficient or too big,

@EricStrebel Год назад

As long as that sealant and stay together, that's what you need

@Hdk_works 4 месяца назад

platinum silicone will not cure properly on tincure silicone mold part , i try long time ago and is a mess hahaha

@humblehombre9904 2 года назад

Do you think, Eric, that the Vaseline/naphtha was perhaps the inhibitor for the platinum silicone? I know there is sometimes problems with the tin vs platinum but you say it has not been a prob before. What do you think? Regards, Cam. Thanks for the hard work.

@EricStrebel 2 года назад

Nope

@ftwproject658 8 месяцев назад

Another great video. How do you clean the HSW syringe tubes after using them to pour the urethane resin? Or are they disposable? Thank you for sharing your knowledge :)

@EricStrebel 8 месяцев назад

I just left the resin harden and then push it out with some compressed air.

@horle Год назад

Why do you degas the silicone befor pouring? couldn't you degas it in the mold? same for the resin. thanks for your content!

@EricStrebel Год назад

Good question, you wouldn't do yes the silicone because you could ruin your master, and you wouldn't degass your resin once it's in the mold because you wouldn't get a good part and you could easily trap bubbles.

@mobayguy Год назад

Awesome job Eric - Learned a lot. I need to make a part for my electric scooter and so I'll give it a try. I'll need to invest in a vacuum chamber and maybe a pressure chamber as well but should be worth it. Question... Is there any benefit to adding extremely fine fiberglass strands to the Urethane resin for extra strength? Thanks

@EricStrebel Год назад

Depends on the results you are after, consult with the resin mfg for best results

@mobayguy Год назад

@Eric Strebel Will do. Thx

@Tjup Год назад

what can i use to cast hard rubber? any sugestions?

@EricStrebel Год назад

Low shore urethane should work well. BJBenterprises.com they have support as well to pick the right materials

@dunichtich100 2 года назад

You did a great job and it requires a lot of handcrafting skills to do those casts, but would it not be much easier to buy and use a resin 3D printer? The partquality you can produce with them is crazy good.

@EricStrebel 2 года назад

Nope, not really strong enough

@dunichtich100 2 года назад

@@EricStrebel This entirely depends on the resin you use just like with casting. I know there are resins available from Formlabs that have a strength north of 70N/mm^2 and have good impact energy absorption so they are not brittle. This allows for highly funtional parts. What do you need the parts for that requires the use of Urethane Resin?

@EricStrebel 2 года назад

Color, strength, heat resistance, numerous factors, someday we will have those capabilities with printed parts, plus who is gonna model these crappy little parts with the correct detail?

@onemorelap_ 2 года назад

Hi Eric, How are you heating your pressure pot? Many Thanks

@EricStrebel 2 года назад

Yes

@ecsyntric 2 года назад

nice! 2:25 noticed you didn’t degas. wasn’t required or did it off camera?

@EricStrebel 2 года назад

Off camera

@keithtam8859 Год назад

so what is the difference between a pressure pot and a de gas chamber? can I only have one of those, and if so, which one would you recommend to get? sorry, extreme newbie question... I am trying to get into casting for model and miniature making... thank you

@EricStrebel Год назад

Pressure and vacuum

@fajrdn Год назад

Is this method good enough to cast object with thread such as ssd enclosure or something similar?

@EricStrebel Год назад

Yes

@1992jamo Год назад

Interesting stuff. But I can't help but think that it would have been easier to design and resin 3D print. Still, incredibly informative video. Cheers mate. Having said that, I have absolutely no idea what 120 degrees Fahrenheit is in centigrade.

@erichjyriprikko9179 8 месяцев назад

Good video! Don't you use pressure chamber? No bubbles...?

@EricStrebel 8 месяцев назад

Yes, that will give you the best results

@erichjyriprikko9179 8 месяцев назад

@@EricStrebel Is 4,2 bar (60psi) enough pressure for polyurethane? I use flex Shore 85A for roller skate wheels.

@EricStrebel 8 месяцев назад

Yes, that is sufficient

@erichjyriprikko9179 8 месяцев назад

@@EricStrebel Thank You! Love your answers. Keep up the good work! (Y)

@anwarigroup 2 года назад

Is there a complete manual for this procedure? such as temperature ranges, material mixtures, amount of mixture etc.

@EricStrebel 2 года назад

Nope, not that I know of

@mikemierspadios7036 Год назад

I was looking in "SMALL SCALE " manufacturing. 3D printing = slow Injection Molding = Fast but more capital intensive. Resin casting seems a balance end for small scale production or firts few 500 PCs for parts. Especially for small start ups.

@EricStrebel Год назад

Resin casting is Definitely not viable for anything more than 20 -30 parts in my opinion

@8711dave 2 года назад

Great content. So do you sell the molds or do you store them? How do you store if you do? Thanks in advance

@EricStrebel 2 года назад

I store them in a cool basement location. If you want to buy one let me know

@benjaminmui7814 2 года назад

I think you could have released the ring from the first mold. Next time try shooting some compressed air inbetween the silicone and the part to break the seal. If that doesn't work, I would have carved out of the a cone/core from the center of the ring. This would have allowed more room for the ID silicone to be pinched and flex which should have given enough wiggle room to remove the part.

@EricStrebel 2 года назад

Good stuff to try, thanks for the comments, much appreciated

@sharp_ghisa6044 19 часов назад

What is the final cost for the customer? It seems like a very expensive job

@coulterjb22 2 года назад

Where do you get your color for resins? BJB liquid pigments? Thanks for this. Always interesting. I need a pressure pot!!!

@EricStrebel 2 года назад

Most places that sell resin will sell colorant as well. But the so strong colors from smooth on have been decent, but there are many pigment supplies out there. Just make sure it's alcohol-based

@coulterjb22 2 года назад

@@EricStrebel Thanks. I have some pigment powder but I’d really like a solid color without swirls. I’ll try So-Strong. I appreciate the reply.

@evren.builds 2 года назад

at 8:00 what is the liquid that you use? Do you use it so the silicone doesn't attach to itself?

@EricStrebel 2 года назад

I use Napa in Vaseline, it's in the video

@evren.builds 2 года назад

@@EricStrebel thank youu

@danielvrana9444 2 года назад

Are the parts hard like the original ones?

@EricStrebel 2 года назад

Yes

@algisberziunas Год назад

just think if you making only some of copies...it mey be easier to 3d scan and then print 3D...?

@First.Last.99 Год назад

You don't prefer to use vibration at some point to remove bubbles if needed? Vacuum is great, but maybe other stages need vibration, or no? I know they use it in Dental work.

@EricStrebel Год назад

At this point I use vibration almost all the time in addition to everything else to remove bubbles.

@EricStrebel Год назад

At this point I use vibration almost all the time in addition to everything else to remove bubbles.

@EricStrebel Год назад

At this point I use vibration almost all the time in addition to everything else to remove bubbles.

@karllautman 2 года назад

Another great video, Eric. When you describe your mold release formula as vaseline thinned with naptha, 70/30, do you mean 70% vaseline, or 30%? And, by weight or volume?

@EricStrebel 2 года назад

70% naptha 30% Vaseline

@karllautman 2 года назад

@@EricStrebel Weight or volume?

@EricStrebel 2 года назад

Well I've never weighed it so I guess volume I just sort of eyeball it

@MordecaiV 2 года назад

If you try it, you'll know.

@goguyted 2 года назад

@@EricStrebel if I don't have naptha, do you think mineral spirits would work as well?

@Jerry-67 2 года назад

any particular thickness/ type of cardboard?

@EricStrebel 2 года назад

Anything you're comfortable using or whatever the job calls for, I like to work in a thickness that similar to the actual material I might use for production

@vasiliymartynov4353 2 года назад

Eric, have you ever had an experience with uneven shrinkage of polyurethane? How do you get over it?

@EricStrebel 2 года назад

No, use good PU

@bjbenterprises 2 года назад

Sometimes uneven shrinkage can come from a lack of vents and "make-up material" in those vents as the material cures and tries to shrink. The vents work in two ways, they channel air out of the mold as the mold fills with urethane, but then those columns of material act as small reservoirs to feed the curing part. That's why fill ports are often sucked in after the part is cured. You want those vents to be roughly similar size to the wall thickness of the part so they don't exotherm too quick and starve the part from make-up material. If you have a very thick walled cast part, you need to make sure there are plenty of vents to avoid this issue or you'll end up with sink-back marks on the part or what we call "worm wood" marks.

@EricStrebel 2 года назад

Very good advice, explained very well

@seemonster77 2 года назад

Dude you have a fantastic voice! Most maker/geek videos have, well... A geeky sounding person narrating the thing. You sound like a rock star. Good content! You're editing is great coz you speed up at exactly the boring parts and slow down exactly where I want to pay attention. Earned a sub from me

@EricStrebel 2 года назад

Thanks 😊