Motor Mount Replacement Tacoma

Подписаться 24 тыс.

Просмотров 9 тыс.

50% 1

This is the first actual repair to the series. In this video, I show you how to replace the motor mount on the Toyota Tacoma. This job is not fun at all. It's tight, it's cumbersome and it's very frustrating. This maintenance repair work will require a lot of patience and a lot of gumption. I show you as best as I can all of the techniques to do this replacement at home. Best of luck to you if you're going to tackle this!
Here's the link to the parts used:
Beck Arnley Motor Mount: amzn.to/3EwOjuc
Here's the link to the rest of the series:
Part 0 - Damage Report: • Everything I broke on ...
Part 1 - Motor Mount Replacement: • Motor Mount Replacemen...
Part 2 - Tacoma BENT Transmission Beam Repair: • BENT Trans Beam Repair...
Part 3 - Rear Diff Leak Repair Tacoma: • Rear Diff Leak Repair ...
Part 4 - U-Joint and Center Bearing Replacement: • U-Joint Updates and Ti...
Part 5 - Tacoma Bed Separation: • SOLO Tacoma Bed Removal
Part 6 - Bed Separation: • SOLO Tacoma Bed Removal
Part 7 - Shackle Flip Design: • Shackle Flip Design Ta...
Part 8 - Shackle Flip Installation: • Shackle Flip Installat...
Check out my links:
Main Store: store.kflo-krib.com
Amazon: amazon.com/shop/kflostacomabuild
Patreon: patreon.kflo-krib.com
IG: KFlo_Tacoma
FB: KFloTacoma/
00:00 - Intro
00:44 - To my new viewers
01:13 - Work Recap
01:29 - Inspection
02:01 - New Motor Mounts
02:28 - Driver Side Motor Mount Removal
05:32 - Broken Mount Damage Report
06:25 - Driver Side Motor Mount Installation
11:57 - Passenger Side Motor Mount Removal
15:04 - Passenger Side Motor Mount Installation
18:47 - Driver Side Final Tightening
20:48 - Motor Leveled
20:57 - Final Button Up Work Driver Side
22:05 - Final Button Up Work Passenger Side
22:54 - Shroud Reinstallation
23:12 - Final Thoughts
24:57 - Outro
#ToyotaTacoma #ManualTransmission #Engineer

Авто/Мото

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@EL_wardan 10 месяцев назад

Kflo you’re a Legend. If I had to do that I’d just get rid of my taco lol

@KFloTacoma 10 месяцев назад

LOL, thanks for the kind words bro. Yea, this work is definitely a big pain!

@moondog8072 2 месяца назад

Nice video but I was wondering wouldn't it be easier on the passenger side to unbolt the mount bracket from the engine block and then the 2 bolts holding the mount to the frame and removing the whole thing to avoid having to jack up the passenger side? Driver's side might not be so easy since the starter and ac compressor are in the way.

@davidasman8537 5 месяцев назад

Aloha my Man… can’t tell ya how many times you and your DYI Skills have helped me out… big time Mahalo’s

@dougm.635 10 месяцев назад

This looks about as fun as replacing the belt tensioner on these 4.0 ! good video..

@KFloTacoma 10 месяцев назад

Agreed, Trying to get good lighting as well as usable video footage was also just as fun. Thanks for watching!

@timparker3272 9 месяцев назад

Did all my Idler Pulleys and Belt Tensioner (OEM), I removed the Fan Shroud and Fan which made everything very easy to access and complete, did some work from the bottom as well....

@michael184272 10 месяцев назад

Excellent presentation.. appeared to be a little stressful and you handled it like a Toyota Pro..

@KFloTacoma 10 месяцев назад

This one is definitely one of the maintenance work that's hard to enjoy LOL. Thanks for watching and thanks for the kind words, George

@alexarreguin5297 8 месяцев назад

You realessed this video at perfect timing bro i needed this info as i wam going through my rebuild!

@KFloTacoma 8 месяцев назад

Lol more to the series so stay tuned

@michaelschwartz8922 10 месяцев назад

Karl… dang brother…. This looks like a pain in the behind. Thanks for sharing and putting in all the work on this video

@KFloTacoma 10 месяцев назад

Thanks for the kind words, bro. Hopefully these videos help you guys out with the more complicated work!

@Sunnyboy9362 9 месяцев назад

Hi . I was wondering if you can tell me what best aftermarket Brand for inner and outer tie rod I have a 2017 Toyota Tacoma Limited. Thanks.

@KICROKS86 4 месяца назад

that little bracket below the motor mount that u removed to get the motor mount out, what was that bracket for ? mine are missing

@alexalanis4830 3 месяца назад

I try to keep it OEM with replacements but that's not always possible. Did you go aftermarket because of price?

@dcruzer1272 4 месяца назад

did you experience a lot of vibration before changing these while driving or rough shifting

@EricNeilson_ 10 месяцев назад

What year is your Tacoma? My 2006 the motor mounts/brackets actually pushed themselves into the piece of shit frames on the 06's specifically. DMZ fabrications (California) actually sells gusset kits for the motor mount areas that tend to fail on the crap frames these things have. Thankfully, I could save my frame areas (welded and gussets). Keep an eye on those areas where the mounts are joined to the frame.

@KFloTacoma 10 месяцев назад

Mine is a 2009 and gusseting those motor mounts is definitely on the list of of reinforcement mods once I have the truck running

@DavidSound-cn2km 10 месяцев назад

Nice work! Do you not have the two mounting supports that bolt under the motor mount? They act like gussets to help stabilize the bottom of the mount.

@KFloTacoma 10 месяцев назад

Mine didn't have the gussets unfortunately. I am planning on fabbing up my own after the repair series

@DavidSound-cn2km 10 месяцев назад

Ah. Yeah, maybe a junkyard too. I may have some extra from scrapping my '13 taco

@eduardoluis9915 9 месяцев назад

Biggest question is it worth it to do it on your own? I got quoted $320 in labor to have a mechanic replace them

@michael184272 10 месяцев назад

What lifting point would you use on an auto transmission Tacoma?

@KFloTacoma 10 месяцев назад

Ideally, it will be at the bell housing as well but anywhere flat really where you can lift.

@Tl-mh7gq 10 месяцев назад

Is this the same for a 2007 toyota tacoma 2.7 auto ?

@KFloTacoma 10 месяцев назад

The overall idea would be similar but it will not be the exact same way

@timparker3272 9 месяцев назад

Going to attempt this job.... It also includes a Transmission mount.... I have all OEM Mounts and Hardware, but I might have to get my Korean wife to use her tiny little hands in there to help with the tight places...LOL Do you have a Video on Installation of a Rear Anti-Sway Kit on the 2005 2G Taco??? Thanks KFlo!!!!

@KFloTacoma 8 месяцев назад

I hope the work turned out ok for you, Tim! Unfortunately, I don't have a rear sway bar installation video

@timparker3272 8 месяцев назад

@@KFloTacoma Thanks and No Worries KFlo, got the kit from Hellwig, it’s an easy job!! Should tighten up the back end nicely, has 3 different settings…. Haven’t done the Motor Mounts yet….

@timparker3272 8 месяцев назад

@@KFloTacoma As always, thanks for your awesome videos!! You’re the BEST!!!

@Fsher276 10 месяцев назад

Looks like my old motor mounts are staying in there.

@KFloTacoma 10 месяцев назад

Yea it's definitely going to be a pain to replace! Thanks for watching

@Vivianauxito 10 месяцев назад

Good video sir, we would like to invite you to do a review video for our Auto LEDs lighting and we just reached out to you via email for inquiring an opportunity. Hope hear from you soon to figure out what we can do.