MSFS: G1000 NXi 1.0 - ATC Sync / WX Radar / Radio Altimeter / LOC BC Approaches - Sim Update 10 Beta

Подписаться 26 тыс.

Просмотров 27 тыс.

50% 1

Versions 1.0 of the Working Title G1000 NXi makes it the default G1000 starting with the upcoming Sim Update 10. It adds support for onboard Weather Radar, Radio Altimeters, Localizer back-course approaches, assigning a VNAV altitude to any waypoint in the flight plan, and now synronizes your NXi flight plan with the MSFS ATC. There were also improvements made to the VFR map by the Working Title team.
How to install the Sim Update 10 Beta for PC or XBOX: forums.flightsimulator.com/t/...
Sim Update 10 and NXi 1.0 release notes: forums.flightsimulator.com/t/...
Working Title Discord server: / discord
=== Chapters ===
00:00 Introduction
00:23 Installing the Sim Update 10 Beta
00:48 IFR clearances and ATC
02:20 Weather Radar and Radio Altimeters
02:45 Weather Radar
05:33 Radio Altimiter and RA Minimums
06:42 VNAV altitudes for all waypoints
09:28 LOC BC approaches
10:39 VFR map improvements
11:28 Conclusion
=== Discord Server ===
If you want to chat with me and others who follow the channel, join us here in the "On The Ground" Discord server: / discord
=== Disclaimer ===
I am not a flight instructor and my videos are not to be used as a resource for real-world flight training. They are only intended as tutorials for casual use in flight simulators like Microsoft Flight Simulator.
#msfs #microsoftflightsimulator #flightsimulator

Игры

Опубликовано:

19 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@TheFalconJetDriver 2 года назад

Great news thank you for information about the update! As a real pilot (50 years plus) I want to point out that RA is NOT used as decision Altitude with a Cat 1 ILS the Baro altimeter is used for the minimum’s that determines the minimum descent altitude. The RA is used for Cat 2 and Cat 3 mins. Yes this is game but however a whole lot of want a be sim pilots want to become real pilots! So give them the correct terminology and how it is properly used rather than they learn incorrect information latter to have to ram dump the incorrect information! Again video Kip😁🛫

@KipOnTheGround 2 года назад

Thanks for that correction about using RA for a Cat I ILS! I also should have said "decision height" instead of "altitude" as well :-) I can't find too much information about it online other than an AVWeb article, but they do mention that RA can be used as a backup during a Cat I approach, but it does say that BARO mins should be used, not RA mins. Great to know!

@kennyiglesias622 Год назад

How do I set the radio altimeter?

@Rahhhhhnman Год назад

Your G1000 videos are a lifesaver, no other channel come close to your clear, concise, miss no small valuable point uploads. Many many thanks.

@lyskmusic Год назад

Was looking for the weather option: thanks so much for your video.

@TheFlightLevel 2 года назад

Glad YT suggestions brought me here! So many channels out there! Yes, this G1000 going as the default for Flight Simulator is a significant step and strengthens the WT collaboration as a solid partner. The info upgrade to the VFR map is a bit reminiscent of ForeFlight, again bringing Flight Simulator up another notch. Great concise video! Blue skies!

@GumperVanLier 2 года назад

Thanks, Kip. You explain things so well. I love using the NXi. I'll wait on the beta as I use the GTN750 premium from the pulldown menu and the programmer needs a little time to make it compatible.

@whammo11224 2 года назад

I like this channel so much, I usually hit the like button before the video starts!

@Sanctimonious007 Год назад

Ditto! and I really like Kip. 💯

@Sebastopolmark 2 года назад

Kip, you really do a wonderful job explaining your topic. Very concise and easy to follow. Thanks and keep the vids coming! !! !!!

@jameswhittles5159 2 года назад

Super job Kip! Great information.

@skinnyTheCat Год назад

Kip! your videos are incredibly well done, Love em! So glad i found your channel!. Have a nice Holliday & stay safe :)

@ramarrie 2 года назад

Great video Kip, you make life easier.

@heavyDriver320 2 года назад

Very nice to see some new progress!

@brunogt1982 2 года назад

Awesome video thank you 👍🏼

@hairsiluet 2 года назад

Great video, I like so much the WX Radar! ⛈👏🏻👏🏻💪🏻🤩

@jarrodclyne707 2 года назад

Wow, this is massive. Great video!

@jakew9887 2 года назад

Great presentation. Thanks

@Sanctimonious007 Год назад

Another great video Kip. 👍👍

@simaviation3 2 года назад

Thank you for the helpful information.

@KevinBlancoZuniga 2 года назад

I fucking love you dude, best videos ever 👌solid as usual.

@handoromper7987 2 года назад

Great video thanks

@Jesusdparra Год назад

the correct term is Radar Altimeter not radio altimeter, thanks for the video! really helpful

@KipOnTheGround Год назад

It’s both actually :-) And the NXi manual itself uses “radio altimeter”. static.garmin.com/pumac/190-02177-00_A.pdf en.m.wikipedia.org/wiki/Radar_altimeter

@mikekellock 2 года назад

Thanks!

@robert28844 2 года назад

I grew up in that area. So cool

@jsemmelify 2 года назад

great instructional vid. thanks! My VFR Map isn't updated and I'm running SU10 Beta.

@845SiM Год назад

Found the traffic radar on this last night. Awesome also the vfr map now shows traffic

@alvarobravo177 2 года назад

It would be VERY nice to see the expected range of the VOR/TACAN/DME on the VFR map

@engineergaming4333 2 года назад

I don't know if you mention it in you video or if it's implemented, but I believe the baring line used for selecting what you want to see on the vertical profile screen. If it's implemented, you can use the small FMS knob to move it left or right (You might need to press enter first.)

@elanshudnow 2 года назад

Ty for video. Wonder when we’ll get user waypoints.

@coriscotupi 2 года назад

Great video as usual. From what I've read online, the updated G1000 NXi as described in the video will now be an integral part of every airplane that uses this device, so after Sim Update 10, should we delete the "Garmin G1000 NXI" update that currently shows up as installed in the FS2020 Content Manager?

@robjones3818 2 года назад

Correct, you will no longer need the Marketplace package to use the NXi in the stock planes. However, third-party planes which are not updated to use the NXi will continue to use the original G1000 for the time being. To work around this, once you update to the SU10 beta, you will see a newly available NXi update in the Marketplace, v0.14.0. If you install this it will patch the default G1000 so that third-party planes use it by default. This is optional, but highly recommended. - Rob, WT dev.

@TheFalconJetDriver 2 года назад

The back course feature in the US is fast being phased out by RNAV approach’s, currently there are only 69 Localizer BC approaches in the US. 😀🛫

@edwardklein3320 Год назад

Hi Kip. Very well done and a real advise to everybody is to watch these vids. I have a question about hpa and inches of Mercury. Can you tell me how I can change both? Which knobs or settings do I need to follow? Thanks for any reply and all the best, Ed

@KipOnTheGround Год назад

If you mean you want to change from Inches to HPA, you can do it on the PFD. Press the bottom "PFD Opt" softkey, then "ALT Units". Hope that helps!

@shoshetts8668 2 года назад

Thanks again for sharing all this information. I would like ask you about the difference between NEXRAD and the weather radar. Maybe if the answer is complicate could be a good option for make a new video ;) Regards!

@KipOnTheGround 2 года назад

NEXRAD is a network of weather radars that are mostly in the USA, and the precipitation they detect can be displayed on the NXi. I think of it like I'm looking up a current picture of the weather in my area online, which updates periodically (between 5-20 minutes mattering the severity of the weather). The onboard weather radar, however, is your personal weather radar equipment installed on your plane, so it gives a real-time look at precipitation in front of your plane.

@shoshetts8668 2 года назад

@@KipOnTheGround Since the release I had this doubt about them. Thank you for the clarification.

@davehart9887 8 месяцев назад

This is awesome thank you now if I could figure out how to do it on my Xbox controller 😂

@kgaming7599 2 года назад

kewl * 5

@UberGeek 2 года назад

And the Bonanza, have Radar???? No. The Bonanza does not have a Radar, no radome or pod on the wing, like TBM, Cessna 208 (DA 62 has the Radar in the nose). Early release of the sim had Radar for all G-1000 planes, but they removed Radar because the Bonanza, C-172, single engine DA, etc. are not Radar equipped. Just like Asobo... on again, off again, on again, they can't get it right. Great review.

@hendrikeveraert3534 Год назад

Thank you KiP, may I ask you a question? G1000 NXi (SU10): how to store / save a completed flightplan direct from the active FP screen ? THX

@KipOnTheGround Год назад

Unfortunately you can't do it directly in the NXi (not sure it they'll add that capability in the future either), but you can save flight plans from the World Map if you do your planning there. Another option -- if you're looking to save some time -- is to import a flight plan file (like from SimBrief) into the World Map before loading into the plane. Just make sure to double-check the plan to make sure it was imported correctly.

@WIGGlNS 2 года назад

@jrod_pilot_miami 2 года назад

Any idea when they'll allow waypoint offset? In the real NXi you can set an altitude "offset" from a waypoint so that you can descend to that point using VNAV, on say a visual approach in a Class D airport, for example, where you want to be at pattern altitude by the time you enter the airspace (usually 3-5 miles). This would be especially handy when doing an VNAV assisted visual approach.

@KipOnTheGround Год назад

No idea, but I'm hoping for that feature to be added too!

@christopherdavis6213 2 года назад

Any idea if the Flight Plan being sent right to ATC will also work with other planes? Specifically thinking of the CRJ700. But does this apply to all systems, or only for the updated G1000 NXi?

@KipOnTheGround Год назад

The ATC/FPL sync issue was specifically an NXi problem, so it has always worked with the stock/Asobo G1000. It's possible that other third party planes that have their own custom avionics don't sync with ATC, but I don't know offhand which other ones may have this issue.

@johnknapp952 2 года назад

How's this going to affect the Bush Flight? Right now (or at least the last time I used NXi version), the flight segments weren't being saved and had to use the default G1000. Also the Nxi wouldn't show the flight plan. So is the ver 1.0 going to make flying the Bush Flights impossible now?

@KipOnTheGround 2 года назад

I'm not sure about the segments being saved, but the most recent beta update (from Wednesday) has this note: "After receiving community feedback, flight plans will now be loaded during bush trips in the G1000 NXi" Full notes on the 7/20 update are here: forums.flightsimulator.com/t/new-update-release-notes-1-27-11-0-july-20-2022/531350

@sagetx 2 года назад

Does the Radio Altimeter automatically show on the PFD (if available) or is there a soft key setting somewhere? Thanks!

@KipOnTheGround Год назад

It automatically shows when at 2500 AGL or below.

@juanwhick1691 Год назад

See I don’t get how if they have the weather radar (which looks similar to the other I was using, PMS50?) it looks like it works the way it should, displaying the height it’s at and all, why can’t FBW or Fenix or PMDG get it into their screens. It’s obviously possible right?

@davidds7174 Год назад

Hi Kip! I'm currently an X-Plane user with a GA cockpit build (lots of hardware and multiple screens) planning to finally try Msfs2020 and the new, so waited, multi monitors settings ability. Now on Xplane, I use home made panels for the G1000 with hardware simulating joystick buttons giving me the possibility to control the G1000 functions inside the sim. Is it currently possible to assign joystick buttons or keyboard keys in Msfs settings to control the G1000 ? I was also thinking of the Air Manager solution, but I think it will only work with touch screens or arduino circuits. Thanks for your help!

@RSProduxx 2 года назад

does it mean radio-alt will work for the F18 as well then?

@845SiM Год назад

There is a free g1000 in the marketplace on MSFS 2020, is that this mod or do I need to delete the add on from the market place?

@kylemccartney1831 2 года назад

Hopefully they fixed the bug where the system shuts off on you mid flight

@gregdildine99 2 года назад

Kip, please see #discussion in WT discord regarding RA mins. Thanks!!

@rackum44 Год назад

Kip I have a video for you for thought. An MFD data bar fields I have no idea what all the abbreviations mean I know a couple but other than that I don't. I switched the one to ETA but that's not making any sense neither Thanks in advance

@jeffbird5082 2 года назад

Can you go back and install the current version after installing the beta? I’m running it on Xbox

@KipOnTheGround 2 года назад

Yep! Just go back to the Insider Hub app, opt out, and restart the Xbox again so it updates the sim to the non beta version.

@barrywells3195 2 года назад

Downloaded the G1000 NIX and then my Locktec autopilot panel did not work Uninstalled it and panel worked.Will it work after update 10

@KipOnTheGround 2 года назад

It's possible that it needs to be updated by the developer to become compatible with SU10, so I'd check if they've posted anything about it (check google, twitter, discord if they have one, etc).

@RedRocket182 2 года назад

The option to request instrument ifr fp has been in the sim for a while

@KipOnTheGround 2 года назад

Yep, but until now it’s never worked with the NXi.

@RedRocket182 2 года назад

@@KipOnTheGround gotcha

@gabor-toth 2 года назад

The weather radar has never worked on Xbox before. Does it now, I wonder?

@KipOnTheGround Год назад

It works in SU10 :-)

@saren6538 Год назад

What’s better to have ? Pms750 or this ?

@KipOnTheGround Год назад

I like the PMS 750 for two reasons: (1) it being touchscreen makes it much easier to use in the simulator with your mouse, instead of hunting for the correct knobs around the display, and (2) it's a huge upgrade for planes that don't have a G1000, where you want something a bit more modern than the GNS 430 and/or 530 (it can even be used in the top toolbar in planes that don't even have a GPS). I'd get the free 750 version and try it out yourself. If you want the premium features, consider the paid upgrade. Hope that helps!

@LA_grover744 Год назад

On my garmin when i turn the botton i dont have the weather radar

@KipOnTheGround Год назад

Only certain planes have it, like the grand caravan and Kodiak.

@LA_grover744 Год назад

@@KipOnTheGround i used the kodiak

@KipOnTheGround Год назад

Are you on the sim update 10 beta?

@LA_grover744 Год назад

@@KipOnTheGround no.. sorry gonna do it now. Thanks

@KipOnTheGround Год назад

The beta has been great for me, hope you have a similar experience

@gabrielsandoval1484 Год назад

can not download it can anyone help me out with this THX

@KipOnTheGround Год назад

The NXi is included in MSFS now since Sim Update 10 was released! If you're using a 3rd party plane, you'll need to get the G1000 NXi in the Marketplace for it to work. But, all stock MSFS planes with the G1000 now use the G1000 NXi by default.

@gabrielsandoval1484 Год назад

@@KipOnTheGround I have try everything I can, I’m using the default Cessna 172 I can not even switch to com 2 or nav 2 y can not set a flight plan manipulating the MFD , when I press the hdg button doesn’t even align with my current heading, is very weird but once again I have tried everything already

@gabrielsandoval1484 Год назад

Garmin G1000 nxi installed v 0.14.0 and it show a picture of the PFD 26.75KIB Then bellow there is another software I guess named Garmin g1000 nxi v1.0.4 6.74MIB Both of this up to date and sim as well What else can I do?