Тёмный

MTD Snowblower Friction Wheel And Disc Repair 

doublewide6 Repairs LLC
Подписаться 134 тыс.
Просмотров 55 тыс.
50% 1

amzn.to/2qy4mWf Friction Wheel MTD (Rubber Part)
amzn.to/32xGW0q Milwaukee M18 High Torque Impact Driver
amzn.to/2NY0uFJ Tekton Flex Ratchet Sets (super handy)
amzn.to/2CriS4D MTD Friction Disc / Plate
amzn.to/2p7l12w Permatex Anti Seize
In this video I replace the friction wheel and the the friction disc on a MTD snowblower. This job is a bit tricky to do, but with some specialized wrenches it is much easier to get done, and you don't have to split the machine to do it.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Опубликовано:

 

15 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@doublewide6
@doublewide6 4 года назад
amzn.to/2qy4mWf Friction Wheel MTD (Rubber Part) amzn.to/32xGW0q Milwaukee M18 High Torque Impact Driver amzn.to/2NY0uFJ Tekton Flex Ratchet Sets (super handy) amzn.to/2CriS4D MTD Friction Disc / Plate amzn.to/2p7l12w Permatex Anti Seize
@mikelangieri6602
@mikelangieri6602 3 года назад
Great Video! I have this exact MTD model and no manual (my Father-In-Law) gave it to me 15 years ago RIP dad. Its been a good machine, not as powerful as my old BobCat which I gave to my son LOL... but its a nice machine and I love the electric start. Got it apart in the garage yesterday, apparently the nut holding the friction disc/pulley came off the other night and is probably buried in the snow outside. Picked up a new 3/8-24 locking nut and grade 8 washer, and in the service position I saw the friction wheel rubber was cracked, so ordered one from Amazon, it should be here tomorrow. This video is about the best thing I could see right now and I should have that puppy up and running by Christmas!
@ernestleo6284
@ernestleo6284 2 года назад
Excellent because snow blowers are similar in their drive systems this is a very educational video.
@dandugan824
@dandugan824 4 года назад
Great video! I am not very skilled in "turning wrenches" but your video, coupled with your detailed explanation, made this repair easy for me and saved me a lot of money. Thanks for taking the time to make your videos!!
@doublewide6
@doublewide6 4 года назад
Thanks Dan. I'm happy to hear you got your repair done. Nice Job! Thanks for the positive comment. Bob
@sixtyfiveford
@sixtyfiveford 4 года назад
Nicely done. I like the Ariens style that you don't have the remove that shaft and the friction disc just bolts on in 5 minutes.
@doublewide6
@doublewide6 4 года назад
Yes, Ariens has a nicely manufactured machine. I'm in the process of figuring out how to make a garden hose hose / air hose fitting crimper, but I have been unsuccessful, just thinking that may be a video up your alley?
@Jaysin13
@Jaysin13 3 года назад
Great video!!! Gonna try it this week! Thanks so much!
@nashguy207
@nashguy207 4 года назад
Good JOb Bob those drive systems remind of the drive systems on the snapper mowers we had growing up. Have a great weekend!!!
@doublewide6
@doublewide6 4 года назад
They are about the same. Those snapper drives are strong and dependable. On snowblowers these drive systems get wet and slip.
@rosalieazevedo6729
@rosalieazevedo6729 3 года назад
You make it look so easy great job
@rustyrepairs2565
@rustyrepairs2565 4 года назад
Thanks D-wide6. Very helpful.
@doublewide6
@doublewide6 4 года назад
Happy you liked it!
@butler386
@butler386 4 года назад
Very good video. A bit complicated but very good fix. Thanks for the video and information. Great job.
@doublewide6
@doublewide6 4 года назад
No problem, thanks for taking the time to comment. Bob
@dickwainscott5146
@dickwainscott5146 2 года назад
Helpful video saved me a lot of time
@588158
@588158 2 года назад
well done; excellent video!
@ZippoVarga
@ZippoVarga 4 года назад
Another great one my Friend! Hugs to the little man. Zip~
@doublewide6
@doublewide6 4 года назад
Thanks Zip. Have a good weekend. Hopefully, it doesn't get too cold down there.
@1829scott
@1829scott 2 года назад
thank you for the video. I'm trying to restart the bolt holding the 2 big auger pullies back in. No luck, if I do what you just did, I have direct access to the bolt. if it can be started, that should do the job. Thanks again
@johnmilner7603
@johnmilner7603 4 года назад
Nice job. Mines still good and original from 1985.
@doublewide6
@doublewide6 4 года назад
I was surprised on this one, The machine has a ton of wear. Maybe the owner has big hills? Not sure.
@cardo1111
@cardo1111 4 года назад
That Milwaukee impact wrench has been dubbed The Miracle Worker. I had an MTD 640F a U.S. built mid 90's machine served me well for nearly 20 years with proper maintenance sold it on Craigslist, replaced it with an Ariens Platinum, now it hardly snows here.
@doublewide6
@doublewide6 4 года назад
Yes, isn't that just how it goes.
@BrucesShop
@BrucesShop 4 года назад
I just did one with the replaceable rubber wheel but haven't published it. You beat me to it. LOL. Maybe I will wait a bit now. January??
@BrucesShop
@BrucesShop 4 года назад
@Fill's Lawn Care Coming soon to a computer near you LOL
@doublewide6
@doublewide6 4 года назад
I am looking forward to see it. Every job and machine is a bit different, even if it is the same machine. With snowblowers you always run into things not going smoothly.
@robertwaid2965
@robertwaid2965 4 года назад
Nice video man...
@doublewide6
@doublewide6 4 года назад
Thanks!
@redskool8498
@redskool8498 4 года назад
thanks bob ... i just did mine the rubber disc that is .. i have a gas leak now in carb tried all except rebuild so got a new one on the way hope it helps .. have a good weekend .. †
@doublewide6
@doublewide6 4 года назад
New aftermarket carb for $15 will get you good as new. Plus, the aftermarket carbs a adjustable for down the road.
@redskool8498
@redskool8498 4 года назад
@@@doublewide6 ... just hope i got the right one lol .. †
@bobbyphazer
@bobbyphazer 4 года назад
Good repair - but your customers MTD machine is missing the small spring that goes from the aluminum friction disk assembly to the side frame of the machine. It is supposed to be in the lower right side. This spring retracts the disk away from the rubber disk / wheel so you can easily move the machine around when the engine is not running. Otherwise it will contact the aluminum plate. A common thing I see break off on these MTD style machines.
@petefroud5308
@petefroud5308 4 года назад
Good fix Bob.
@doublewide6
@doublewide6 4 года назад
Love the Taryl shirt. There's your dinner.
@petefroud5308
@petefroud5308 4 года назад
Bob loved the vid you did with Taryl Mustie and Steve.
@kenpappas9520
@kenpappas9520 3 года назад
I have a large O ring on those bearings holding the shaft in. Do I need to remove the O ring or just knock the bearing out from the inside?
@philanderson8419
@philanderson8419 2 года назад
Would you have a video on removing wheel axle on cub cadet 524 swe?
@wryanddry2266
@wryanddry2266 2 года назад
What would happen if you replaced the friction-wheel rubber but kept the same pulley/disc (maybe after polishing it up)? Maybe take it to the auto parts store and they could smooth up the surface on their brake-disc lathe?
@tonym6920
@tonym6920 4 года назад
👍👍
@chrisssmallengines7163
@chrisssmallengines7163 4 года назад
There most be thousands of these across north America .Good video .
@doublewide6
@doublewide6 4 года назад
Thanks Chris, for sure. I see these snowblowers all over the place.
@wryanddry2266
@wryanddry2266 2 года назад
Millions of snowblowers of many brands use basically the same drive arrangement. Riding mowers too.
@berardia4
@berardia4 4 года назад
Nice job. If the friction disc is not to bad off you may be able to resurface it with a sander and save some $. Also I'd recommend you only use impact sockets on impact wrenches for safety.
@doublewide6
@doublewide6 4 года назад
Good tips. I don't have a full set of impact sockets (I should). That plate was done.
@berardia4
@berardia4 4 года назад
doublewide6 Repairs LLC I got a set of standard SAE and the Pro line Metric at Harbor freight. They are both good so far. The Pro line are a bit nicer, nice finish, if you use them alot.
@charlesscheck6517
@charlesscheck6517 7 месяцев назад
say no worries about oil leaking with unit turned over like that?
@estorey1465
@estorey1465 4 года назад
Cool looking wristwatch, what kind is it?
@doublewide6
@doublewide6 4 года назад
Casio from Amazon, I like it. I have had it about 3 years now. On the second wrist band though.
@brodonh
@brodonh 4 года назад
Just changed rubber on friction wheel and it all looked OK but still doesn't drive right. Acts like it isn't geting good friction contact. we also change the 3 belts.???
@wryanddry2266
@wryanddry2266 2 года назад
Does the drive-clutch cable have too much slack?
@MikeJones-jr5hb
@MikeJones-jr5hb 4 года назад
1st
@nemfrob
@nemfrob 4 года назад
@ 1:51 I think I'll bring you guys over to this side and show you my bald spot. 😂😂
@PainterD54
@PainterD54 2 месяца назад
You should never run your rubber wheel so far down that there is metal on metal. if you change the rubber in time, your smooth metal wheel will last forever. Also you need to grease that shaft that the speed adjuster slides on so it shifts easier and doesn't wear out. Also the bushings in the axle need constant greasing or they will wear out.
@knighthawk86855
@knighthawk86855 4 года назад
For a second there, I thought the big 1/2 fuel snapped the bolt off.... But great job, not a fun job.
@doublewide6
@doublewide6 4 года назад
I thought the same, then I was thinking maybe it was reversed threaded. I have never found a nut that that that thing would not break loose or break off.
@heathwilson2572
@heathwilson2572 2 года назад
Double Wide 6 LLC replace the the friction disc is not to do
@MikeJones-jr5hb
@MikeJones-jr5hb 4 года назад
1st
Далее
Фонтанчик с черным…
01:00
Просмотров 1,5 млн
Спецэффекты в Симс 4
00:36
Просмотров 107 тыс.
MTD Snowblower Doesn't Move - HOW to FIX!
32:58
Просмотров 391 тыс.
Fixing Track Snowblower That Won't Drive
26:04
Просмотров 27 тыс.
DIY - Ariens Snowblower Friction Disc Repair
8:20
Просмотров 193 тыс.
Lawnmower Owned By An Idiot
21:51
Просмотров 36 тыс.
Honda HRR 216 Replace Wheel And Drive Gear Pinion
13:09