NASTY Whipple and Cammed Cobra Lays down over 850WHP

Подписаться 149 тыс.

Просмотров 12 тыс.

50% 1

ML Tuning: mustanglifestyle.net/collecti...
ML Key Tags: mustanglifestyle.net/collecti...
Discount Codes:
MUSTANGLIFESTYLE 10% Off at freedompartsoutlet.com
MUSTANGLIFESTYLE 5% Off at steeda.com
ML7: 7% Off at bmrsuspension.com
MLSLTH: 10% Off at longtubeheaders.com
MustangLifestyle 6% Off at lethalperformance.com
Mustanglife11: 10% Off at boostane.com
MustangLife: 6% Off at www.jlttruecoldair.com
MUSTANGLIFESTYLE: 10% Off at sctflash.com
Equipment Used:
Canon 80D Video Creator Kit: amzn.to/34QsRNI
Canon G7X Mark II: amzn.to/2O56L4r
GoPro Hero 7: amzn.to/2O3TI39
Macbook Pro 15" Retina 1TB SSD 16GB Ram 4GB GPU: amzn.to/2O5Do1C
Mustang Lifestyle Decals Now Available! mustanglifestyle.net
Like us on Facebook: / mustanglifestyle
Follow us on Instagram: / mustang_lifestyle
Follow us on Twitter: / mustanglifetv
Follow the Team:
Andrew: @MrAjsTech / mrajstech
Ash: @Ash_Carlton / ash_carlton

Авто/Мото

Опубликовано:

14 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@jamespurvis8880 3 месяца назад

Those cobras are something special that's for sure! Plus they sound better than a coyote.

@bernardsmith0 2 месяца назад

Ok let’s not get carried away 😅

@MrBowent54 2 месяца назад

Definitely sound better.

@jahlilsmith2012 2 месяца назад

@@bernardsmith0they 1 hundred present sound better than coyotes

@billymadison8036 Месяц назад

@@bernardsmith0there is no comparison. Coyotes don't sound anywhere near as good. Plus, the terminator absolutely destroys coyote mustangs

@bernardsmith0 Месяц назад

@@billymadison8036 noooooo they don’t 😅😅😅dope car tho 🔥

@michaeltemple8333 3 месяца назад

Gotta love the baby seat in the back.

@SVT_Beck 3 месяца назад

That thing looks like it has amazing drivability!! Especially with cams wow. I need an MS3 for my 03 Cobra!!! 😮😊

@MustangLifestyleTV 3 месяца назад

Let me know I can get you setup

@SVTgotti 2 месяца назад

yea im getting one too . 😅

@MrFitnesssouth Месяц назад

Can you spin the 4v to 8k with the MS3?

@chrissomchai4871 3 месяца назад

Bro I ain’t gone lie love da passion u have for mustangs an how u love what u do if I had time and money I would take my 2013 simple bolts on a let u tune it. Being married an a father of 3 it’s difficult… but I always look at your channel and like all vids all the way from Shreveport Louisiana

@noahnajor2408 3 месяца назад

Perfect set up for the street. Sinple, reliable, fast

@JustConnerygo 2 месяца назад

Love seeing new edge appreciation 🩵

@CertifiedRippers 3 месяца назад

That thing rips!

@toreydavis9488 3 месяца назад

That is a nasty Cobra. Sounds incredible. Good job.

@natethegreatog 3 месяца назад

Awesome job on the tune! Bet he's happy to have full throttle pulls.

@mellisimo 3 месяца назад

God that car is perfect. Everything i want some day.

@scotmorris8640 3 месяца назад

Buddy you need a mic for a car like that lol! Much respect! I’ve been watching since 2016 … just sayin. Ok since the black 5.0 n red Cobra 🐍 😊

@traiw3108 3 месяца назад

Bruh that cobra sound real good

@jeremiahlinton9582 3 месяца назад

Awesome car!!

@julianskns 3 месяца назад

Exhaust set up? Thing is nasty ❤

@stephenalexander2427 3 месяца назад

Where are you in Florida ? Glad to see a heavy “ terminator “. Content ! What about doing a video on checking the compression and stuff ? How do I really know if mine is heathy or not ? Thanks buddy

@JJ-zd5hu 3 месяца назад

damn thats nuts

@sabinoguzman7780 3 месяца назад

I think Andrew is gonna become the wizard of tuning 03/04 cobras 🐍 drew FTW 🙌

@dauntayacosta 3 месяца назад

🔥💯🤙🏼 I want one so baddd! Thats a bad betch right there

@sergebasque8460 3 месяца назад

Nice terminator and hp what size and brand of tire is that, the owner seem happy.😊

@Srt8kai 3 месяца назад

I’m a mopar guy and watching this makes me want a ford 😂

@jeremiahlinton9582 3 месяца назад

Do it you won't regret it!!

@grandprz1008 2 месяца назад

That’s gotta B one of the best sounding Mustangs I’ve EVER heard…, EVER and I’ve owned more than 25 of them 😮🤣🤣🤣🤣😆

@jaxspeedfreakjoe8109 3 месяца назад

Monster

@umakemerandy3669 3 месяца назад

You know the wheel dimensions? They fit quite nice.

@joshuahiggins5313 2 месяца назад

😂 he said,”don’t Kill us”

@_4.6ricardo 3 месяца назад

Blower cars sound so fuckin mean🔥

@kennethporst4359 3 месяца назад

I Always Wondered what 3.0l supercharger would Do

@natethegreatog 3 месяца назад

How much clutch engagement does an mt82 have? I feel like there should be more. Is it usually at the end of the pedal and very short, almost on and off.

@Bpat610 3 месяца назад

They say fords can’t chop. Beauty of a cobra big fan of those CCWs.

@midnight347 3 месяца назад

The only ford that don't chop is coyote based engines that still use their vct. If you lock out vct on coyote based engines they'll chop even with stock cams and every other Ford engine including all the mod motors pre coyote all chop with cams just like any other engine does. So people that say "fords don't chop" have no idea what they're talking about and what they mean to say is "coyote based engines that still utilize vct don't chop" lol. Literally everything else does with cams. All the mod motors 4.6 and 5.4/5.8 4v as well as 4.6 and 5.4 2v and 3v all them chop with cams.

@mangoyum3374 3 месяца назад

Drew whats his suspension setup my guy??

@KyleS5Fiddy 2 месяца назад

Is there a cobra specific part number for MS3?

@andrewberkley7138 3 месяца назад

Can you get an ms3 for my built 2010 gt500?

@Mr60InA30 3 месяца назад

Boy the entire time you was in the Cobra I couldn't hear shit you said. 😂😂😂

@kennethcombs4419 3 месяца назад

Need information on the VMP Gen 3R would a water method help with octane since there is no E85 around here in Washington and running boost pumps.. Thanks

@midnight347 3 месяца назад

Use boostane full 16 Oz can of premium per tank turns 93 into 100 octane and it also acts as a fuel stabilizer and has something in it that keeps it suspended. Boostane ftw for anyone that don't have regular access to e85

@Lethal_Venom 3 месяца назад

That car must be insane to drive lol

@MustangLifestyleTV 3 месяца назад

It’s definitely a party

@svtpower03 3 месяца назад

That’s one problem I have with my 03 is it wants to stall out when clutching in and slowing down to a stop. Whipple 2.9 crusher with stock cams and pcm. I’ve had 2 different tuners and still haven’t gotten the damn thing to stop stalling out lol

@MustangLifestyleTV 3 месяца назад

Send it over here for ms3 install and retune. I’m not saying it’s impossible to get right on stock ecu but ms3 is worlds better all around

@svtpower03 3 месяца назад

@@MustangLifestyleTVan ECU upgrade is definitely in my plans just not there financially yet. Just got done rebuilding my rear after blowing it up at modnats lol. I may hit you up if I go that route though I’m in Georgia.

@3500camarz 3 месяца назад

@@svtpower03If you were close to Nevada then I’d be willing to street tune it for you. But sounds as if you just need to find a good tuner honestly.

@realkaiser 3 месяца назад

WOOOOOOOOOOOOOOOOOOOOO

@jamesj5469 3 месяца назад

Is there a car seat in the back 😂

@tooslow9981 3 месяца назад

Looking at the graph, it looks like the power didn't drop as it went higher in rpms. Would the MS3 allow you to let the car rev out to the low 7k range with out any issues?

@JDaniels281 3 месяца назад

That's the whole purpose of the MS3 since the stock ecu starts to act crazy at around 7k.

@tooslow9981 3 месяца назад

@@JDaniels281 Good to know, but now I am wondering why he stopped the pull around 6700ish rpm then.... If it was making the power as the rpms were increasing, why stop?

@patr80 3 месяца назад

What kind of gearing is in this car? Plan on going the same setup with my 03 cobra and would even like to maybe talk to you about tuning it. Gearing looks longer or maybe it’s just hard to see the cluster through my phone screen lol. Maybe 3.27 gears?

@2valve4six73 3 месяца назад

Nope. 3.55s

@patr80 3 месяца назад

@@2valve4six73 is this your car? Genuinely asking to know for sure. Terminators come stock with 3.55’s ofc but look at his rpm’s and certain speeds. Seems like 2nd reving out close to 100mph. Looks like he put longer gearing in it and it’s working great

@2valve4six73 3 месяца назад

@@patr80 he's a good friend of mine. We have a new edge group here in tampa

@YamaBoyFZ09 3 месяца назад

I would love for you to tune my turbo 03 cobra

@MustangLifestyleTV 3 месяца назад

Let me know

@foxxrider250r 3 месяца назад

Str8 up meatsickles out back

@gregoryjowers3629 3 месяца назад

It’s amazing how the stock terminator motor can make so much power. I was told the rods is the weak link in the 2011 gt500

@kme5925 3 месяца назад

03/04 cobra the motor is bulletproof owned one from 2003 sold it in 2012 and I really regret selling it

@sategllib2191 3 месяца назад

Until the newest gen gt500 they all had powdered rods, idk what ford was thinking with that

@JordanSVT 3 месяца назад

That's a lot of power for just 21PSI and conservative timing. Is it the cams making the difference? Higher compression?

@Jordancraigmiller 3 месяца назад

It's pretty much the E85 + the 3.0 Whipple. Cams help a little bit but not a ton.

@JordanSVT 3 месяца назад

@@Jordancraigmiller That's still pretty crazy. I guess the efficiency of the Gen 5 3.0 is just that nuts. I'm currently building my Cobra. Going Gen 3 2.3 Whipple 22PSI on E85 and 20⁰+ timing and I'm only expecting to make 700WHP maybe a little more. That extra 150WHP on a setup/tune not nearly as hot is wild. If the 2.3 ends up not being enough I'm going 3.0 for sure.

@Jordancraigmiller 3 месяца назад

@@JordanSVT I have Stage 3 Comp cams, same exhaust set up as him. 2.3 Whipple first gen on 21 pounds 93 octane making 630WHP so you should be right around 700!

@JordanSVT 3 месяца назад

@@Jordancraigmiller I know about your build, one of my favorites out there. I've been watching you for years. You probably don't recognize my username or profile pic now (previously 2004 Terminator Cobra) but I always watched your stuff, even back when I was in high school and didn't even have my own Cobra. I'm working with Kevin Dunn to get mine tuned and he says I should be hitting my goal on that setup so I'm super excited for it. I haven't seen anything from you in a while, hope you're doing well bro.

@Svt01Snake 3 месяца назад

The 3.0 Whipple is a game changer on these cars. This car is insanely clean in person and sounds amazing. And Steven can drive. We are planning to run once my set up is finalized but I dont think it’s going to go well for me lol I went from a 2.3 to a 3.0 whipple and my car is Dunn tuned. The difference is insane. The 2.3 hits harder down low but mid rpm and up the 3.0 is insane.

@industrialawnllc4239 3 месяца назад

are those cosmis or ccw wheels?

@MustangLifestyleTV 3 месяца назад

Ccw

@davidpersaud5592 3 месяца назад

Wheels ? What make?

@MustangLifestyleTV 3 месяца назад

CCW

@paulhudgins5120 3 месяца назад

Man she looks like she drives amazing, the tuning with those cams make it a daily driver, a little loud for me but she sounds very nasty.A very awesome job tuning, very nasty and bad@ss Terminator Cobra.

@edmundnlemadim8480 3 месяца назад

crazy for lazy 8.5:1 compression and stock head castings. CNC head and 9.5:1 compression this would easily be 900-910whp no change in boost.

@sategllib2191 3 месяца назад

Still nasty. Probably was already at his power goals or budget limit

@edmundnlemadim8480 3 месяца назад

@@sategllib2191 absolutely. reminded me of my Whipple Gen 3 2.9 crusher DSG cobra. Had a 8.5:1 MMR 4.75 with ported DC casting heads and Ford GT cams. 705whp on 20lbs revving to 65-6600 rpm I can only imagine what it could have been like with MS3 instead of stock computer and more compression and more cam. I would definitely buy another if prices weren't so crazy that it only makes sense to get a GT500 or gen 2/gen 3 coyote instead

@ranware9071 3 месяца назад

🤣 its funny how new edge mustangs still look better and sound better than any mustang 15+

@johntrutanich1798 3 месяца назад

It's probably hard for you to call a car quick or rowdy after driving a 1300 RWHP GT500 .......... Don't get me wrong , I got an 04 Terminator I'm building at the moment and can't wait to finish , tune it and get it on the road and I'm sure that Terminators fast , powerful , rowdy and fun as f*ck to drive , just say'n , after driving a 1300 hp car , 860 probably seems slow which is "F'n" crazy when you think about it

@2valve4six73 3 месяца назад

Guess you didn't factor in the weight difference.