Nissan Quashqai Front Brake Pads Replacement 

Absolutely shocking video, way to much copper slip, infact you don't need any. Worst part of the video is you have clearly put copper slip on the friction material aswell.

Thanks.Very handy.As a novice to vehicle maintenance I would like to know more about pushing pistons back.

That seems like far too much copper grease.

Copper grease will draw dust and other particles too it and you also got it on the frictionside of the pads. Very bad job....NO CARMANUFACTOR USE GREASE OUTSIDE BREAKES. ONLY DRY AND CLEAN PAINTED SURFACES THAT WILL NOT CLOGG UP

I have a 10 model qashqai the wing mirror on the drivers side will not fold in when I push the manual button the passenger one works fine .could you do a video on how to take apart a wing mirror and how to fix it thanks

Good vid guys,is it the same procedure for a 2005 Note.

terrible. slapping copper grease all over the parts and noticing the brake oil level is over max you just screw the cap on. bloody hell..

Very helpful, many thanks

Does that mean that it's o.k. for brake fluid to be OVER the max mark?

Way to much grease, using compressed air to clean the dust... NO.

Hi, Is the Metal that you attached to the back of brakes is a part of the brakes pad ? or part that belong to the car ? I bought original pads and I don't have the metals ?

Hi, what did you torque the caliper bolts to?

Thanks chaps. Most useful.

as someone said before in the comments. "Absolutely shocking video, way to much copper slip, infact you don't need any. Worst part of the video is you have clearly put copper slip on the friction material aswell"

hi there which grease are you using ??????

copper grease all over the inside of the pads between disc and pads at least clean it or bad breakes .

good video. nice done.tnx

Copper grease! Maybe you should research GALVANIC CORROSION. Your welcome.

thanks guys i am old school nice to be able to see what tools are needed

dont need grease as it has metal plates, grease on the material, use brake cleaner to clean the points of contact. How not to install pads, bad job guys, seriously

Awful

Very helpful, thanks