Nissan Versa SV 1.6L 2012 - Part 4/4 - CVT Transmission Rebuild - REF011A / JF015E

Подписаться 4,3 тыс.

Просмотров 113 тыс.

50% 1

Part 4 of 4 - REF011A / JF015E CVT Rebuild
Vehicle: Nissan Versa SV 1.6L 2012
Transmission: CVT REF011A / JF015E
You crazy person, you've taken apart the the whole entire CVT tranny or you haven't yet, but wanted to see how it looks like to put it back together? Thanks for asking. Here's just that.
Video Markers:
00:14 Pulley Sub Assembly
04:09 CVT Tranny Oil Pump
05:29 Idler
08:00 Reduction Gear & Final Drive Assembly
08:51 Splash Shield
09:25 Oil Pump sprocket, gear, and chain
10:44 Manual Rod/Shaft & Rooster cone
14:26 Reverse Brake Feed Tube
16:02 Torque Converter Housing
19:30 Valve Body
20:55 Transmission Filter
21:20 Transmission Pan
22:50 Transmission Cooler
23:00 Transmission Cooler Filter
24:13 Transmission Bracket
24:35 Output Speed Sensor
-----------------------------------------
Tools Required:
1. Rubber mallet
amzn.to/3uWoq17
2. 12mm, 10mm, 14mm, and 16mm sockets
amzn.to/3ehv4cx
3. 3/8'' torque wrench
amzn.to/3bWcsM4
4. Allen Key #6
amzn.to/3rjhqcz
5. Needle nose pliers
amzn.to/3c40251
-----------------------------------------
Parts needed:
1. Genuine NS-2 Nissan CVT Trans. Fluid
amzn.to/3bkBcii
2. Loctite SI5460 (Pink) & Caulking Gun
Can be purchased through eBay
3. Permatex Threadlocker (Blue)
amzn.to/2O7E88V
4. CVT Transmission Oil Pump
Can be purchased through eBay

Авто/Мото

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@williamdiaz5981 Год назад

My friend you did a awesome job because of you I was able to rebuild my transmission. I salute you and appreciate you. Thanks a bunch.🎉

@neshwermojicamelendez63 Год назад

Muchas gracias, de verdad que me has ayudado un montón. Nuevo subscriptor desde República Dominicana

@alimcanuff6056 3 года назад

Bro you are one of the best channel to watch you help me a lot continue my brother God bless you

@TheLaborService 3 года назад

Ali. I'm glad it's helped you and other people out there. I've got many videos to edit and put up, but I haven't had time. Thank you for the wonderful comment! God bless you too!

@muhammadnublyhusainymohdla4428 3 года назад

very appreciate with all CVT repair videos. Thank you.

@custompainting2023 16 дней назад

Hey dude I wanna say thank you Because of you I was able to reinstall everything inside so I kept watching since your first video about the primary and secondary pulley ensemble thank you I know it’s hard recording a whole process but you did a great job So this is my first cvt JF015 rebuild with no experience or knowledge at all but it’s was fun and it took me long time but the second one it’ll be easier more familiarize to it So I’ll put it back on soon and I will stop by to let you guys know what happened hopefully it’s working perfectly. Bye 🤞

@ramongarcia9455 Год назад

Excelente demostracion,gracias.

@franciscoayestas5771 5 месяцев назад

I'm really satisfied with Your training thank You.

@ArturDaniloTeixeira Год назад

Good Job! Congratulations from Brazil.

@BroadwayLTDProductions 4 года назад

Man that looked easy af. Next time the pos CVT in my Sentra blows, I can rebuild it myself.

@TheLaborService 4 года назад

Yup! Inside is much simpler than we think.

@user-pz7xw1cx5w 3 года назад

Hi Did the rpm reach 3000 in your sentra at 120km?

@HardDriveBeatss 4 года назад

excellent work man u got a future on youtube

@TheLaborService 4 года назад

Thank you! We'll be posting more videos soon!

@vandamnjaunclode9813 2 года назад

your videos is the best

@pascaltafairai8039 9 месяцев назад

magnifique video

@markmitchellful 2 года назад

awsome instructions. learned alot.

@Jaypr942-Angelsfightingforus 7 месяцев назад

Super cool! Thank you for sharing

@781coolmind 3 года назад

Nice job bro

@patricknguyenbrewer2618 6 месяцев назад

Great job, thank you very much young man

@user-tj1hm6ef5r 3 года назад

Very good my friend

@faisaladam6023 Год назад

thanks buddy for the helpful info 🙏🏼🙏🏼🙏🏼

@rodrigozambrano9815 3 года назад

grasias por aportarnos tus conocimientos y aportar para que aprendamos de las cvt..tenkio

@TheLaborService 3 года назад

No problemo my friend! thank you!

@huantong3157 3 года назад

Thanks ser

@meowashley7979 Год назад

Really this video save my life 😅

@aurellleshi9779 3 месяца назад

Great video thank u

@moreykhan5336 10 месяцев назад

great job

@sammysawyers2849 4 месяца назад

Great video, it’s rooster comb

@erikasaldana955 2 месяца назад

Gracias por compartir

@검둥개 4 года назад

If you have time, please rebuild Hondacvt engine. Your explanation is easy to understand. thank you for sharing your technology.

@TheLaborService 4 года назад

Thank you! I would be glad to crack one open if I ever run into one. What year and model were you looking for, I'll keep an eye out and if I ever get the opportunity to, I will do it. These CVTs are much more simpler to fix than we all think.

@marklo4416 3 года назад

You are good!!! i would not know where most of the nuts and bolts goes???

@miroslavivanov3496 2 года назад

Hey mate, great videos, I have a question regarding the idler shaft bearing. Is this the upgraded NSK version? Is it 12mm thick? If it is did you keep the shim under the bearing on the housing side ?

@soorajsooraj5425 3 года назад

Hy Gay's excellent work👍

@abubakarmohdhemily4599 Год назад

Good video...help me a lot....😊

@jandrade7786 Год назад

LIKE BRO

@ronledbetter4993 4 года назад

I have a 2011 Versa with a CVT RE0F08B Will this be close to the same trans as yours. If it is I may rebuild it. I actually thought about changing it to a manual transmission. Have you considered this.

@markmitchellful 2 года назад

make sure the bolts that go in the primary variator are shorter than the rest of the bolts that join the variator case to the the case because longer bolts will destroy the reluctor

@nilugajjar8205 3 года назад

Good job can you tell me my nissan versa note is rpm is up so what is the problem

@juanpabloberger5552 4 года назад

Mejor imposible👏👏👏

@alisami4919 2 года назад

I rebuilt my Nissan Sentra 2016 transmission e, the car doesn’t start because the gears aren’t starting, and on the dashboard it only shows an R, no D or N or any other gear. Please reply. Thank you.

@edgarvasquez573 2 года назад

Can you add part list and where did you buy them how much you spend on parts

@bdstr6185 Год назад

Cool

@user-jk2kr9wp5l 3 месяца назад

Could I use another transmission from Nissan and just change the bell housing I hear if the y12 and the juke am just not sure working trying seems to be cheaper

@urvitamink Год назад

how did you get the computer programmed and relearn the new transmission shifting?

@shadowmodding3606 Год назад

Did you have to buy any special tools for the rebuild besides the ones you have in the description?

@william3862 10 месяцев назад

My friend that was a good job I have a question I'm working oh my versa note myself it happened that I lost the snap ring for the oil pump gear do you know where I can find one if you know I will appreciate thank you

@menjicar 6 месяцев назад

1:43 I saw another video were it came with 2 little o rings on the top holes. 2 top holes for the variators

@joseLopez-qg3im 8 месяцев назад

Can I use sealant 5999 gray vs 5460 pink? Thank you!

@VASYL198 4 года назад

What you think about transmission? It's good 2014 versa note cvt... or toyota forever!

@user-kn6ye3km7v 2 месяца назад

Fucken awesome dude

@user-tb7cg1em9q 3 года назад

Where do you get gloves

@edgarvasquez573 2 года назад

Is it true 2012 versa only one transmission and no other year will fit

@EdsonYamamoto 3 года назад

does the transmission cooler has a oil filter inside too ? the JF011E has 2 filters, one in the oil pan and one inside the transmission cooler. sorry about my english

@TheLaborService 3 года назад

The transmission cooler filter is on the side of the transmission, at 23:00, the second filter is the actual transmission filter which is under the valve body inside the transmission pan.

@mouadtissir1628 Год назад

Bonjour Mr svp j'ai le temoin check engin allumé après diagnostic ( code fault 0846 sensor pression de liquide de transmission) Svp qu'est ce que je dois faire Merci d'avance

@user-lo5yl6ym8n 2 года назад

Hello! can you share jf414e/re4f03c repair service manual

@erayny0 2 года назад

Excellent work Thanks for the guidance! Where did you get all the replacement parts?

@TheLaborService 2 года назад

Purchased over amazon, ebay, and alibaba

@toltec13 2 года назад

I have a similar transmission with 2 problems: car dies off when put in drive or reverse. I'm starting to think it's the valve body. The 2nd problem, is the jerk when I put the car in gear. After about 1/4 mile the jerk stops and car runs normal. Is the valve body responsible for both problems?

@ahmedus5155 2 года назад

I have same problem, i found piece of metal in valvle body cover. Changed fluid and filters, works nice only when engine is hot. Now im taking down transmission and open it check what is wrong

@rigoreyes76 4 месяца назад

Where did u get the parts?

@miguelmoro1 3 года назад

Very good video, I have a 2008 gts lancer with cvt transmission, can you upload videos of lancer?

@miguelmoro1 3 года назад

My gts have a zumbido in cvt transmission, do you now What is the problem?

@frederickbowman4494 Год назад

love your video i would hire you in a heartbeat!!!!!

@cesarp.c7290 3 года назад

work very well, sorry how much is the loctite si5460?

@TheLaborService 3 года назад

It's about $30-$40 on eBay

@TbNReyna 3 года назад

I have a versa 2013 and I have problems with it, I lost the acceleration when I was driving is like the car is on neutral and I turned off to try to cold the transmission and motor, but after that the car is couldn't power on again, this could be for the primary, secondary and belt for CVT transmission? Is necessary to replace?

@TheLaborService 3 года назад

If the belt breaks, the car should still be able to start,, but you won't be able to drive or reverse. If reverse works, then its something else. If the car doesn't start its something else. How many miles is on your car?

@TbNReyna 3 года назад

@@TheLaborService the car has around 111810 km, already I reviewed with a mechanic and maybe is the wheel of the motor is broken, I think this match with the characteristic issues

@iftinchanneliftinchannel682 2 года назад

Excellent work my friend is this same 2009 nissan cube transmission? hope you reply thank you for your help 🙏

@TheLaborService 2 года назад

No the transmission for that model would be different. Will most likely have similar parts, but it is not the same.

@hermanjones4124 Год назад

I rebuilt my CVT JF011E transmission got it put in but I’m getting a secondary pressure solenoid stuck on ( low pressure) what do I need to look for Thanks I replaced valve body with a complete reman Please can you help 5:53

@TheLaborService Год назад

Did you swap the ROM chip that was on the original valve body to the new valve body? Here's a link: at-manuals.com/wp-content/uploads/2020/05/jf015e_solenoids-1024x655.jpg

@jeremygarr30 Год назад

I have a question for you after you rebuilt the transmission did you have to get the tcm re- flashed or reprogrammed

@JoseContreras-if7ye 10 месяцев назад

same question

@romeldphillips3146 3 года назад

Does frequent transmission fluid change make the belt last longer?

@TheLaborService 3 года назад

It does help a bit, but not a miracle or anything. I find that even after just 5,000 - 10,000 mi. you'll already start to have debris in the transmission fluid from the belt scrapping on the variators. What needs to be done every single time you do a transmission change is, drop the pan, clean the magnets, replace transmission pan gasket, transmission filter, then you'll have to do a transmission flush with about 10 qts. of CVT fluid and at the end change the oil cooler filter, It's just a really bad design and these CVTs are super sensitive to dirty fluids.

@romeldphillips3146 3 года назад

@@TheLaborService okay, thanks for the feedback

@menjicar 6 месяцев назад

Followed everything and transmission still slips 😭

@dwaynehall7231 3 года назад

Awesome work. Are there place you can get cvt parts

@TheLaborService 3 года назад

I ordered them from Alibaba, but eBay might have some stuff.

@growchampja2110 3 года назад

@@TheLaborService how long did it take?

@kaungmyatthu8093 2 года назад

How much oil is need for typical oil change ?

@TheLaborService 2 года назад

Without removing the tranny filter and pan. About 3.5 to 4 qts. If you remove the filter and pan is about 4 qts.

@joshuafelix101 3 года назад

When you installed the bearing thats on top of the idler puller sprocket at about 10 minutes in the video. does the bearing raceface down or up and does the race have to "snap" into place or does it kind of just lay on top?

@TheLaborService 3 года назад

You are talking about the sort of bearing cover right? It just goes over it, sometimes you'll find it stuck back on the torque converter housing on the inside, it doesn't snap, it just sits there.

@joshuafelix101 3 года назад

@@TheLaborService thanks I got it put back together in the car. I was wondering if you could help me troubleshoot it. I have everything in the car minus the cv axles and obviously everything that goes to the spindles. When I go to the start the car the starter clicks just one time and then nothing happens. I cleaned up my motor ground and jumped the battery and the same thing happens. I installed a new valve body from the dealer and it needs to be flashed that be the problem? I'm double checking to see if I missed any connectors but I'm pretty sure I got them all.

@joshuafelix101 3 года назад

Nevermind I got it to start. I think the spline to the motor was little bound up. And when I jumped it again it freed up and turned over.

@TheLaborService 3 года назад

@@joshuafelix101 Very nice! I hope all goes well!

@TheLaborService 3 года назад

@@joshuafelix101 The EEPROM from ur old valve body should have been swapped onto your new valve body. If you still have your old valve body that would be the easiest way to do it. However, I don't think it would be the EEPROM that's preventing the car from starting. If it just clicks, and if your battery is in good health, it sounds like it could possibly be the starter. Are all your sensors connected? Is it just one click? or multiple clicks? make sure your ground wires are properly connected. There's that other ground wire that goes from that chassis to the battery plate too I believe, driver side front. Are you able to scan anything?

@morningstar4473 3 года назад

Hi, thank you for sharing these videos are excellent! Where did you buy the master kit for your cvt transmission?

@TheLaborService 3 года назад

Hello, I purchased the master rebuild kit off of eBay. Should come with the clutches, seals, o rings, etc. You should also change the transmission pump. That was also purchased on eBay. The pulleys were bought on alibaba.com

@rhondastout137 Год назад

Hi! Hey...how long did all of this take you? Thanks!

@francecescogentile961 Год назад

Ou puis-je trouver les pièces qui me conviennent pour mon Nissan 1,2 DIG-T

@francecescogentile961 Год назад

De 2015

@thegamepz Год назад

Is it mandatory to replace the pump ?

@TheLaborService Год назад

If you are in there. You might as well.

@omgthatguy1 4 года назад

Where did you buy the rebuild kit or parts from?

@TheLaborService 4 года назад

The rebuild kit, and the secondary, primary, and belt, were all purchased on Alibaba.com. The company I spoke with and got very helpful information from was Guangzhou Xinyulin Auto Parts Co., Ltd. And they are the people that supplied the parts for me. The pulley kit was $236.50. and the master rebuild kit was $89.50. With shipping and everything it was $475. Shipment was also quite fast. I believe it was less than a week to arrive.

@omgthatguy1 4 года назад

The Labor Service I have a 2014 Versa I think I’m going to give the rebuild a shot and see how it goes. I’ve rebuilt engines but never transmissions. Where did you get the torque specs from? I use all data but I don’t think they have in-depth transmission info, well maybe they do I never really looked. You have ig or Snapchat?

@TheLaborService 4 года назад

@@omgthatguy1 I will eventually start an IG, you can e-mail me at thelaborservice@gmail.com. I can give you more sources and information. No problem!

@lioban9743 3 года назад

@@TheLaborService Hello, do you do this CVT repairs for others? I would be interested to get my 2013 versa's transmission repaired. I'll send you an email from my Lionel gmail account.

@karlitototototo 3 года назад

Some kind of clip

@johnbaptist7476 2 года назад

❤ + 🕯 😇 ❤

@Nocturnal.Paradox 10 месяцев назад

Just got quoted $4300 for a rebuild 💀

@karlitototototo 3 года назад

You forgot one piece

@rabahhemamdia9556 Год назад

جيلي،منجرانت7,علبةاتومتكية 2018,عطل،في،طرمبة،ااعلبةالاتومتكية،لزيت،مع،ضهور،لمبت،اازيت

@kennethhrabb287 7 месяцев назад

Great accept for the profanity.

@TheLaborService 7 месяцев назад

I didn't know I didn't have the freedom to speak, my apologies for being a human being and not an angel from the gods. I hope the video has provided you with the necessary information needed from hell.

@RickB1792 7 месяцев назад

Great answer!

@RickB1792 7 месяцев назад

Very nice video. Love the spicy talk and commentary. Perhaps the best video on rebuilding these piece of shit transmissions I've ever seen. Great job!