Notifier NFS2 640 Programming Guide 

0:00 - Intro 1:32 - How to go into programming mode 3:17 - How to program/add points in the SLC 7:02 - Point programming 12:10 - Notifier special function programming 13:27 - How to program NAC sync/coding options 17:14 - Setting up an agent release NAC 19:21 - How to change notifier LED polling speed 21:12 - How to change the system normal message 22:38 - How to turn off trouble reminder 23:30 - How to change addressable protocols 24:04 - Testing the panel and alarms

Excelente demostración. Felicidades!

there is some reason we need to shutdown this control box. how do we do it? and how to turn it on again when we want to use it ?

yes I will totally need this for totally legit fire alarm stuff hmmm yes

If cross zones activate, will it cause a pre discharge countdown? Thanks!

I have a remote annunciator, and i do not know how to program it, could you help me with that

Is there a default passwork to access Basic Programming?

I have a smoke detector that failed to recall the elevator. So the recall relay isn’t assigned with the smoke. Is it possible to change that through the panel ?

is there any way to remove this beep from the fault ?

I cant seems to get to the " change program " menu, even im using the correct password. It just gets back to the home screen. Sometimes it works but most of the time not. 1:32 . I know that its not a wrong password since it doesnt shows error it just simply puts me back to home screen.

Can you autoprogram a new device if you already have existing programmed detectors or modules on the slc?

does the 640 use both the 320 and 2-3030 cpu cause ive seen some with the 3030 cpu and the 320 cpu like this one

I try modifying a detector and it wouldn’t let me. For example I tried modifying a detector the address was 1D001 but instead it took me to the 2 detector which is 1D002 I tried, and tried changing ID001 but it just skips to 1D002. Do I have to run auto program again to modify this point????

We replaced an existing FSP-851 with the newer FSP-951 detector and base. But the panel showed trouble TEST F. What could be the problem...?

¿como habilitar software de una nfs2 640 bloqueada?

But, what if i don't have the password

How to activate the smoke detector remotely, through the control panel ?

Can you tell me,how to use CBE

theres Security LED and try connect home security with panel

How to Change Date and Time

When i press auto programming nothing is happening what to do?

nfs 320 next plz

Do you have a template of the word meanings like AHJ codes like that and what they are used for… and please don’t abuse ur panel at 14:48 I almost dropped my dinner 🤣🤣

I need you help..

Notifier simp 😤

Tea you are terrible