OIL PUMP REPLACEMENT ECOTEC 1.8 1.6 CHEVROLET CRUZE CHEVY SONIC 1.8

Подписаться 953 тыс.

Просмотров 93 тыс.

50% 1

OIL PUMP REPLACEMENT ECOTEC 1.8 1.6 CHEVROLET CRUZE CHEVY SONIC 1.8
In this video we will show you how to remove or replace the oil pump on Chevrolet Cruze also known as Holden Cruze and Daewoo Lacetti. This video may cover Chevrolet Sonic oil pump removal and replacement since they share the same engine. We demonstrated the oil pump removal / replacement on Chevrolet Cruze with the 1.8 engine.
We showed you the oil pump removal / replacement on a 2015 Chevrolet Cruze but this video should be helpful on:
2008 Chevrolet Cruze Oil Pump Removal Replacement
2009 Chevrolet Cruze Oil Pump Removal Replacement
2010 Chevrolet Cruze Oil Pump Removal Replacement
2011 Chevrolet Cruze Oil Pump Removal Replacement
2012 Chevrolet Cruze Oil Pump Removal Replacement
2013 Chevrolet Cruze Oil Pump Removal Replacement
2014 Chevrolet Cruze Oil Pump Removal Replacement
2015 Chevrolet Cruze Oil Pump Removal Replacement
2016 Chevrolet Cruze Oil Pump Removal Replacement
2012 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2013 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2014 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2015 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2016 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2017 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2018 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
2019 Chevrolet Sonic (Holden Barina) Oil Pump Removal Replacement
► Oil Pump: amzn.to/2MlfaQ5
► Gasket Maker Silicone: amzn.to/30Zueai
► Timing Tool: amzn.to/2MkU3zk
► Timing Belt Kit: amzn.to/2SNTi19
► Dewalt Air Compressor: amzn.to/2JZtFb2
► Impact Wrench: amzn.to/30Yb58E
► Tool Set: amzn.to/2yveO1v
► Reverse Torx Socket Set: amzn.to/2SMUYbc
► Torx Socket Set: amzn.to/2LL8rzy
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Авто/Мото

Опубликовано:

1 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@AutoRepairGuys 4 года назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@lexpalacios963 2 года назад

Hola, buen día 😃 Quiero decirle que estoy bien agradecido con usted por haber compartido este vídeo tutorial que ha sido de gran ayuda. Yo soy técnico en electrónica y electricidad industrial, pero me apasiona la mecánica y tengo un Sonic 2014 1.6 a quien me gusta darle mantenimiento. Gracias a usted pude eliminar la falla de mezcla de refrigerante y aceite de motor. Todo el proceso completo paso a paso como lo explica me sirvió para eliminar la causa raíz de mi problema. De antemano gracias hermano y saludos👍

@nkosiyethubhola6443 3 месяца назад

Thanks Thanks now I know the problem of my car

@IhemDaniel-ok3hj Год назад

This is amazing .. it HELP alot .. thanks.

@brothervince9485 2 года назад

Thanks a lot Auto Repair Guys!

@marjantashkovikj4547 4 года назад

Great video it helped me, thanks!

@lexpalacios963 2 года назад

Thanks for you information, regards!

@treemoon999 4 года назад

Good job..👍

@manny4djuice 2 года назад

Wonderful work I was same car i love ur WORK keecp it up battling with Same wonder

@chrisharvey5003 4 года назад

going to start the same job on a vauxhall astra j 1.6 mk6 2010 in the next couple of day's, but not going to drain the a/c system and hopefully will be okay,will let you know the outcome' and a BIG thanks for the video.

@tiquis5 4 года назад

chris harvey how did it go? All I have left is the a/c compressor and oil pan but yeah. I don’t know if I want to since I haven’t drained the a/c system

@oktafajarsyah8319 3 года назад

Great..thakns!!

@mrsshai4626 3 года назад

Great explanation quit detailed

@donizeteneves1886 4 года назад

great video. Please inform: What torque is used to fix the screws of the ecotec engine oil pump

@tricky778 4 года назад

I've got a similar engine (3 door 1.6l Astra H SRI 2011 - I think it's a sports hatch model). Oil in the coolant (not like mayonnaise, just brown oil). The timing belt is due for a change, the air-con won't provide cold air, my coolant is low, and previously I seem to have had oil spray all over the engine compartment (the dipstick was found sticking out approx 3 cm and the oil was well above the maximum mark). I wonder if the coolant was overfilled, over-pressurised, bust either oil pump or oil cooler gaskets and dumped itself into the sump until the pressure equalised with the oil and boiled blowing oil up the dipstick, and now the coolant is lower pressure than the oil so the oil's going into the coolant through the same fault? My front bumper needs to be refurbished also, I feel the suspension isn't as comfortable as it used to be and I'm getting excess road noise which could easily be from the drivers side due to the wheel arch cover, a missing lamp access flap in the drivers side, and excess vibration of unknown origin. Should I have the front main gasket (oil pump gasket I think?) and oil cooler replaced at the same time along with inspection and improvements to those other things (bushes and engine mount, etc) because it looks like there's a lot of work to be shared among them?

@ahmedahmed-dt5ew 4 года назад

what a big job

@tumelomakhetha8544 4 года назад

Nice, great and helpful videos you having brother, im from South Africa and im driving a 2012 chevy cruze 1.6 echo tech 16 valves, what seems to be the problem is i drive and every stop i get, i hear a knock in the engine but the oil lamp doesn't go on... Any help you can give??

@ronenit4580 2 года назад

As usual very informative and well guides video. But a main inf is missing when you put back the big seal if you use silicone or not... and how much torque pressure to close it... ammm

@hermanjoseph6578 4 года назад

Hello CRG, could you please show if there are dowells holing the oil pump from coming out. Thank you

@garyleeper6473 Год назад

Great Video as always, I do know you don’t have to remove the A/C compressor exhaust or the oil pan to replace the oils pump or water pump in a 2015 sonic 1.4 T.

@dudlos15 2 года назад

Great video. One question. I've noticed that at one point(34 mins) you were going to remove the camshaft sprockets with T55. I assume to remove the rear timing belt cover. But later on the video the sprockets are intact and the rear cover is on. Does the rear cover need to go off for the oil pump assembly removal? Thanks.

@macgyver2615 8 месяцев назад

Torque settings to put it back on? thanks for the video much appreciated.

@ahmedahmed-dt5ew 4 года назад

pls help me harsh or hard shift from 2nd to 3 rd gear but when i first start the engine and go its smooth but when it reaches the normal temperature it starts to shift hard

@acercrack 2 года назад

Estaria bueno que pusiera el torque y el orden de apriete cuando coloca la bomba ya que unos lo ponen en espiral otro cruzados otros de adentro asia fuera.. cual seria el modo correcto? Saludos

@gordonhelms719 9 месяцев назад

Do you have a video for Buick encore 1.4L oil pump replacement?? I cant find one. Thanks

@MM-lj2ow 3 года назад

I want to ask about a Chevrolet Cruze .. if the camshaft are changed Places , will there be damage? And what happend if chaned the places

@robertmorin6495 2 года назад

I like your videos but the opening introduction with the engine revving scares me every time when I forgot I left the volume up full.

@eddiesheeran5791 Год назад

Great video! Thank you! Can you share why this car needed an oil pump? The past 2 oil pressure problems I've had to repair were caused by the owners not caring about the oil level inside their engine.

@gilbertobennette5424 4 года назад

Hey man!! Great videos w the Cruze... Love the way you explain things, very easy to follow : )......... Do you have any videos regarding the pistons being removed... I was in the process of changing the head gaskets and saw that the piston number 1 & 4 was cracked on my project... can you help ? any videos ?

@ShadowOfIntent94 2 года назад

Its a long shot but i just recently replaced my head gasket in my 16 1.8l cruze, used exactly the same video for reference along with "Alldata" and after everything was put together, still on jack stands with one wheel off and dust covers still removed, i tried to start it and it cranks but does not wont to fulling start.

@amiraux7234 2 года назад

I have a car for which I put 5w30 oil, and when I traveled 154,000 km, I put 10w40 oil, but the problem is when I start the car in the morning, I hear crackling in the oil pump.

@ronwink9573 3 года назад

How many miles on the car that oil pump had to be replaced?

@tricky778 4 года назад

Is it possible (even if not recommended) to remove and replace that oil pump assembly without removing the sump? Because it looks like a lot of work to take so much from the front of the car and engine as _well_ as the timing infrastructure

@jibajaba5227 4 года назад

The oil pump housing has dowels, so it won't let you slide the housing out without the oil pan removal. And to make things funner, the oil pan/sump on the 1.8L won't clear the frame without lifting the engine a few inches. I didn't have a cherry picker/engine hoist, but you can use a jack and a piece of wood to gently lift the engine a little bit on the corner of the engine block until the oil pan clears. The 1.6L oil pan seems to clear the frame rail, so I hear.

@hermanjoseph6578 4 года назад

@@jibajaba5227 Thanks for that info, I'm doing a holden cruze and the oil pump doesnt wan to get out , so im guessing there is some kind of a restriction. Maybe dowels

@naasrautenbach2440 Год назад

Hi how do you bleed the oil pump

@reginaldtshishonga2564 Год назад

Hi I have installed new oil pump and it is not pumping all

@saudshabra1068 4 года назад

I did the same thing and after 4 months it started to leak again

@CrisPalms 3 года назад

que era?

@samueltshabalala1775 Год назад

What will happen to my car if oil pump doesn't work

@LyubomirL 4 года назад

хах мартеници :) От България ли сте момчета?

@diegogonzalez6099 4 месяца назад

What is this, You could of gone into detail about the oil pump it’s self isn’t that what the description of this video says. This is bs. Should of just called it how to remove timing cover and explained the purpose of the timing cover gasket