Тёмный

On3 70MM Turbo 4.6L - 2V Mustang GT Review - The Purebred Ford 

GreenLightFilming
Подписаться 47 тыс.
Просмотров 85 тыс.
50% 1

This was my first shot at filming an review video! The owner of the car went above and beyond by OFFERING his ride up to make a review video! We spend a whole day together shooting all of this footage, and I can't thank Kirk enough for the opportunity to drive his car. It was a massive extension of trust, and I hope the video does it justice.
If you are in the Minnesota/Wisconsin area and have a unique car like this, and would like a feature/review as the driver or in this format send me an email at greenlightproducers@gmail.com!
I do realize that there is some rattling on the audio while I'm talking in the car, and that won't happen next time. The offending clips have been unceremoniously removed lol...
The car is a 2001 Ford Mustang GT, with a 4.6L (281CID) V8, squeezed with a gentle 10lbs of PSI from a single 70MM On3 turbocharger. This kit can be had for around $1,600.00 and will yield similar results as the car in this video. Behind the 2 valve headed engine, is a 5 speed manual transmission, and a solid rear axle with a 4.10 rear gear ration, making this car a blast to drive.
Hope you like the video!!!
#Mustang #Turbo #Burnout #Ford #FordMustang #on3turbo #on3performance #turbomustang #mustangreview #fastcar #greenlightfilming #minnesota #500HP #dragracing #rollracing #rollrace #review
----------------------------------------------------------------------------------------------------
The audio used in this video can be found below:
Track: Sub Urban - Cradles [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Sub Urban - Cradles | ...
Free Download / Stream: ncs.io/CradlesYO

Авто/Мото

Опубликовано:

 

24 авг 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 200   
@vulture8878
@vulture8878 4 года назад
I’m really happy to see new 2V content on RU-vid FINALLY.
@Greenlightfilming
@Greenlightfilming 4 года назад
More 2v content to come too
@buddyywilsonn
@buddyywilsonn 3 года назад
The sound of the 4.6 engines is why I won't do a coyote swap. They sound so much better than the coyotes.
@carlosvelasco4119
@carlosvelasco4119 3 года назад
nah were just broke
@erict1144
@erict1144 2 года назад
Haha
@djtido23
@djtido23 2 года назад
9 months later I still piss myself laughing 🤣🤣
@erict1144
@erict1144 2 года назад
Same haha. Driving mine right now.
@buddyywilsonn
@buddyywilsonn 2 года назад
It's like 100 more hp for an engine swap seems awesome but then coyote only handles 700hp on pump gas. Might as well build a 1000hp 4.6 4v imo
@Greenlightfilming
@Greenlightfilming 5 лет назад
If you are in the Minnesota/Wisconsin area and have a unique car like this, and would like a feature/review as the driver or in this format send me an email at greenlightproducers@gmail.com!
@BDauto86
@BDauto86 2 года назад
I can appreciate for the most part your GM and driving/reviewing this mustang. I own/owned more Fbodys but I like mustangs and this 1 is sweet.
@MrPHATSPEED
@MrPHATSPEED 5 лет назад
The longtubes and X pipe that were on the car are now on my 2004 Mustang GT. Got to know Kirk when I bought my car mine. Mine the slow version of his car.
@blown87gt
@blown87gt 5 лет назад
Hi Hadam 🖐🖐🖐
@Greenlightfilming
@Greenlightfilming 5 лет назад
oooo I was wondering if this was him! lol. I didn't know he bought some of your take off parts.
@toonedsv
@toonedsv 5 лет назад
Editing is 👌 more of this! Great commentary. The audio quality is so good from the outside! Nice job :) 10/10 would drive that.
@Greenlightfilming
@Greenlightfilming 5 лет назад
Thanks bud!! Going to try and shoot a few more of these if anyone wants to offer a cool car up to feature or review! I've got a pretty good camera (Canon 80D) for all of the outside shots. The camera I used for the commentary is good too, I just didn't realize that the two strap clips on it were rattling. So annoying. You should make some vlog type videos! You do a lot of racing, and it would be fun to watch you keep getting better.
@derekfink6525
@derekfink6525 5 лет назад
Nice job on the video can’t wait for some more local cars
@Greenlightfilming
@Greenlightfilming 5 лет назад
Thank you! I hope some more unique cars come along! I've got a couple in the future but nothing immediate.
@jacobd8242
@jacobd8242 4 года назад
Nicely put together. Car sounds great.
@Greenlightfilming
@Greenlightfilming 4 года назад
Thank you, glad you enjoyed it! The car sounds really good in person. Video never really captures it.
@ThatLoud3v
@ThatLoud3v 5 лет назад
Dope content and a sick ass 2v turbo💥💥💥 u get your self a new subscriber🤝🏼
@Greenlightfilming
@Greenlightfilming 5 лет назад
Thanks buddy! Welcome the the channel. Thanks for subbing
@Twinturbomach
@Twinturbomach 5 лет назад
Turbocharged 2vs are always fun
@Greenlightfilming
@Greenlightfilming 5 лет назад
This was the first one I've been in. It's making awesome power, and I'm a big fan of it. Really cool car! BTW, I'm planning on being at the Wednesday night drags this week if the weather will be good.
@Twinturbomach
@Twinturbomach 5 лет назад
How much power is it making? And awesome man we will definitely have to meet up there! Looks like it’s gonna be 69 and sunny so hopefully my car won’t get as heat soaked haha. You gotta do a review of my mustang for your channel man here soon
@Greenlightfilming
@Greenlightfilming 5 лет назад
@@Twinturbomach hell yeah dude I would love to! We can talk about it Wednesday if we both make it to the track. It would be a lot of fun! I would need a good part of a day with you to do it all. Kirk's car was making 450+whp when we shot it. Should be close to 500 when he gets it retuned. It's very conservative right now.
@Twinturbomach
@Twinturbomach 5 лет назад
GreenLightFilming sounds good man! I’ll be there today! I’m deciding if I should bring the gti or the mustang
@Greenlightfilming
@Greenlightfilming 5 лет назад
@@Twinturbomach of course I'll suggest the mustang! Lik. I'll be there around 530
@ShelbyWithAShelby
@ShelbyWithAShelby 4 года назад
I love my twin turbo 2v. The power comes on a little bit quicker than the single turbo cars, but for now I'm only making 400whp just to play it safe with the motor as it's a daily driver
@brettbaker8130
@brettbaker8130 4 года назад
Twin setup to make 400 why
@ShelbyWithAShelby
@ShelbyWithAShelby 4 года назад
@@brettbaker8130 because it's a daily, and still has stock internals. I didn't have the money to put forged internals in it when I built it, and 400whp is about the most it can safely handle. I plan on turning it up to over 1000 when I get the motor built
@brettbaker8130
@brettbaker8130 4 года назад
I just always wonder why ppl go twins when there goal at first is not very high. What's the twin setup cost
@ShelbyWithAShelby
@ShelbyWithAShelby 4 года назад
@@brettbaker8130 twins allow for smaller turbos that spool faster, so the power comes on quicker and is just easier to drive on the streets. As far as cost for everything, most of it was custom fabricated, and it was nearly $8000 for everything. The only things that aren't custom to the car ar the turbos, the headers, and the intercooler
@Megacatares
@Megacatares 4 года назад
Shelby Siegmann dang did you pay someone to install that is a lot of money could have been in a vette if you sold your car and put that combined money into a vette.
@justicedavenport6388
@justicedavenport6388 4 года назад
Great hd quality and editing
@Greenlightfilming
@Greenlightfilming 4 года назад
Thank you! Glad you enjoyed it
@tomalexander7313
@tomalexander7313 3 года назад
Love the license plate frame 🤣
@Greenlightfilming
@Greenlightfilming 3 года назад
Good eye lol
@joshestess
@joshestess 4 года назад
Hopefully with the retune they can rid of that stumble down low when shifting. Gonna be doing an on3 kit on the wife's car soon
@Supatango957
@Supatango957 2 года назад
That’s fire 🔥
@countryboy262i6
@countryboy262i6 5 лет назад
Video turned out great!
@Greenlightfilming
@Greenlightfilming 5 лет назад
Thanks Travis! Had a lot of fun cruising down to Duluth with everyone last weekend. We should do it again sometime.
@countryboy262i6
@countryboy262i6 5 лет назад
Yes, would love to take another cruise.
@Greenlightfilming
@Greenlightfilming 5 лет назад
Me too!
@connorjohnson2214
@connorjohnson2214 3 года назад
Great song and editing
@Greenlightfilming
@Greenlightfilming 3 года назад
Thanks! Appreciate it.
@raybsure7438
@raybsure7438 3 года назад
Great Video by the way as I had an 00 GT with a Vortec S Trim. Your buddies Turbo would smoke mine.
@outlawstang
@outlawstang 3 года назад
Love the car what wheels are those
@Agnostic.JohnOG
@Agnostic.JohnOG 5 лет назад
Sweet ass review man.
@Greenlightfilming
@Greenlightfilming 5 лет назад
Thank you! The next one should be even better. This was our first crack at it.
@TurelBey
@TurelBey Год назад
Is that the stock cam idling like that?…. Sounds amazing
@adamfredrickson7908
@adamfredrickson7908 5 лет назад
Nice video work, more rolling footage.
@Greenlightfilming
@Greenlightfilming 5 лет назад
Thanks Freddy. It was my first crack at doing a video like this, so there was some trial and error involved. The owner was awesome and played guinea pig for a whole day with me haha. Turnout out pretty good overall. The rollers were good in the end.
@Svt_joker
@Svt_joker 3 года назад
I was thinking about 5.0 swapping mine but I was like I'm buying stage 3 comp cams and a 78mm throttle body and I think its gonna be a fun build plus the sound of a 4.6 is really mean
@Greenlightfilming
@Greenlightfilming 3 года назад
It sounds great with cams. I think you'd be a lot of money ahead instead of Coyote swapping it. Hard to beat that late model engine though! Probably makes more power with longtubes compared to a 2v with cams lol.
@MrDavidelliottjr
@MrDavidelliottjr 4 года назад
Sweet
@abasiczombie.
@abasiczombie. 2 года назад
How did you get the popping backfire? N2MB WOT box?
@kashifamjed4939
@kashifamjed4939 4 года назад
What kind of power is it making? Awesome 2 valve btw!
@Greenlightfilming
@Greenlightfilming 4 года назад
This one is making right around 500 if I recall
@centraltexasfoxbodies
@centraltexasfoxbodies 4 года назад
You can clearly see the tubular front control arms with the under shot of the car.
@FANET0
@FANET0 2 года назад
Car sounds so fucking good
@Greenlightfilming
@Greenlightfilming 2 года назад
Thanks Bud!
@pederbuilt2324
@pederbuilt2324 3 года назад
Sweet! MN local!
@maciasd303837
@maciasd303837 4 года назад
I'm in the middle of installing my kit right now and I'm debating the bumper exit or if I should just shoot it out the rear
@lolosolodolo1
@lolosolodolo1 3 года назад
No question. Bumper exit all day
@Greenlightfilming
@Greenlightfilming 3 года назад
+1 for bumper exit
@maciasd303837
@maciasd303837 3 года назад
Yeah after having my on3 kit on since may I’m definitely going with a bumper exit now
@THETOPGLOCK
@THETOPGLOCK Год назад
@@maciasd303837 I know this is a two year old comment but I have a question for ya. The bumper exit pipe. Do you have to fab one up or can you just buy one? Thanks
@vcboyztv682
@vcboyztv682 4 года назад
Hey I just got this kit and I was wondering how did you go about tuning/ecu and stuff?
@brandontalley9152
@brandontalley9152 4 года назад
VC Boyz TV for tuning use the MS3 Pro MegaSquirt.
@blown87gt
@blown87gt 4 года назад
This is my car. I had it tuned with an sct x4, stock ecu.
@shanewilson977
@shanewilson977 4 года назад
turbo2v hey could you message me. I have a 2V and I live in Minnesota I’m looking to do this
@israelmendez8886
@israelmendez8886 3 года назад
Hey sir, I was hoping I can pick at the owners brain a little bit in reference to the build. I have a 4.6 2v setup , I want to purchase an on3 turbo kit. But I'm clueless as to what else I'm going to need like injectors? Stand alone fuel system ? Or a tuner? What time of springs should I run on the heads? Do I have to build the block ? Different pistons or what not.. I have so many questions I'd be nice to get information from someone who's done it right, in my opinion. :) Thank you, I hope you could help.
@isaacabernathy8819
@isaacabernathy8819 2 года назад
every figure anything out
@raybsure7438
@raybsure7438 3 года назад
I’m thinking of going turbo on my 03 Terminator. I had a Lysholm twinscrew 3300 and made 609rwhp but then the head unit froze up and imploded. I now run a Ported Eaton and wonder if you know of any single turbo kits for Terminators or are they all twin turbos.
@maciasd303837
@maciasd303837 4 года назад
What tires you running on it I plan to do on3 on 10psi too building my motor this winter
@MrOhai1337
@MrOhai1337 4 года назад
I have nt555r's on mine. 315 wide.70mm on3 kit on 10 psi. If its a warm day second gear will hook.
@maciasd303837
@maciasd303837 4 года назад
@@MrOhai1337 that's what I was planning to run . Thanks What trans are you running?
@MrOhai1337
@MrOhai1337 4 года назад
@@maciasd303837 Stock TR3650
@maciasd303837
@maciasd303837 4 года назад
@@MrOhai1337 that's what my spare trans is how's it holding up on 10psi I'm about to swap it in over the winter
@MrOhai1337
@MrOhai1337 4 года назад
@@maciasd303837 Holds fine. Dont launch it under boost or powershift it super hard and it will last forever i bet haha.
@downhilldaddy9346
@downhilldaddy9346 3 года назад
💪🏾
@bryce090892
@bryce090892 3 года назад
Can you get back to me about the on3 turbo kit please I have plenty of questions
@chris-8597
@chris-8597 3 года назад
Is the transmission stock?
@Webbman
@Webbman 2 года назад
What's the 0-60, I'm very curious 🤨
@hermanwatson1051
@hermanwatson1051 4 года назад
Nice 2v. Anymore vids of this car anywhere?
@blown87gt
@blown87gt 4 года назад
The car in the video is mine, I don't have many videos of it on my channel, but a few of it on the dyno and whatnot. I'm not RU-vid savvy lol.
@samuelloose8236
@samuelloose8236 3 года назад
@@blown87gt love the car you know how much power it’s making?
@blown87gt
@blown87gt 3 года назад
@@samuelloose8236 it's currently roughly 440whp. I have a new fuel tank and pump setup to swap in, then get it retuned. Should be well over 500 whp then. Won't be till spring though, the car is hibernating for winter currently as I live in northern Minnesota.
@samuelloose8236
@samuelloose8236 2 года назад
@@blown87gt that's awesome! Can't wait to see more. I can't wait to start building mine also!
@2vgod460
@2vgod460 4 года назад
I think the 410 are not good with boosted cars at all, i had 410 on a procharger 2v and I took them out and installed 3.73 was gonna go 3.55 but 73 is nice gears
@Greenlightfilming
@Greenlightfilming 4 года назад
He installed the 4.10's before the power adders, and would agree with you 100%! I would imagine down the road he will change them.
@2vgod460
@2vgod460 4 года назад
Does all he have is cobra pistons and rods? No crank?
@Greenlightfilming
@Greenlightfilming 4 года назад
Yes, just pistons and rods if I recall correctly.
@buddyywilsonn
@buddyywilsonn 3 года назад
Is there anyway to do this without cutting a hole in the fender?
@jeremyb2108
@jeremyb2108 3 года назад
Of course. The on3 kit gives you the option of running a full cat back exhaust.
@The_Monarch1
@The_Monarch1 3 года назад
Wait till my 2v town car is done.. 👀
@dreteyete7305
@dreteyete7305 4 года назад
Cost of tune? Just got this kit for a 4.6 2v crown vic...
@blown87gt
@blown87gt 4 года назад
I paid 500 for the dyno tune
@dannyjr7997
@dannyjr7997 4 года назад
373 gear would be better imo. Great build! Love turbos!
@madmod
@madmod 4 года назад
If it was a positive displacement blower car I'd agree
@madmod
@madmod 4 года назад
@CockYaLegS without knowing his tire size it's pointless to recommend gear changes. 3.73 on a 26 inch tire is the same as 4.10s on a 28 inch tire. Unless the car is trapping over 125 in the 1/4, 4.10s are perfect.
@brendan25
@brendan25 4 года назад
Are the heads stock? What work did you do to them if not?
@blown87gt
@blown87gt 4 года назад
The car in the video is mine. The heads are bone stock. Just has aftermarket cams
@gsc2866
@gsc2866 3 года назад
@@blown87gt are these kits good I'm thinking on getting one but not sure
@blown87gt
@blown87gt 3 года назад
@@gsc2866 I've had zero issues with mine in the 10,000 miles it's been on the car
@gsc2866
@gsc2866 3 года назад
@@blown87gt I feel like I just may go just doing heads and cams for now then doing a supercharger cause I just rebuilt my whole suspension and dont wanna do it all over again just to get a k member to work with the turbo but that's definitely a sick car how much power you making I'm curious
@blown87gt
@blown87gt 3 года назад
@@gsc2866 at the moment about 440 whp, once I get it retuned in the spring I should be well over 500 whp
@larryolveda5018
@larryolveda5018 3 года назад
What hood is that!!
@01Snorky
@01Snorky 2 года назад
@4:10 what the hell is that ticking noise. Mine does the same
@samuelloose8236
@samuelloose8236 3 года назад
You know how much power it’s making?
@Greenlightfilming
@Greenlightfilming 3 года назад
If I recall, the owner mentioned between 400-450 with the new pistons/rods since he last had it dynoed.
@derpinskyeh3967
@derpinskyeh3967 5 лет назад
Honestly sounds like a mustang without exaust
@blown87gt
@blown87gt 5 лет назад
Well, that's because it basically has no exhaust lol. It's just an open downpipe strait out the front bumper cover. I used to have full exhaust with magnaflow mufflers, but decided to just to the bumper exit this year.
@Greenlightfilming
@Greenlightfilming 5 лет назад
Listening on a phone really doesn't do it justice. Lots of turbo noise on speakers and especially in person! Wish everyone could hear it under power in real life. Its awesome
@derpinskyeh3967
@derpinskyeh3967 5 лет назад
@@Greenlightfilming oh im sure im missing detail in the sound but i know what those mustangs sound like without an exaust.... They sounds mean af
@lovelymari2256
@lovelymari2256 4 года назад
derpinsky eh I just took the cats and exhaust off of mine for a straight pipe , but it’s so loud im debating on even putting a system back on it. makes me feel more like a .... MAN
@KingB015
@KingB015 4 года назад
How much hp & Tq?
@blown87gt
@blown87gt 4 года назад
Before it blew up, it was making 454 who and the torque was only 430, the cams aren't ideal for a turbo. Once I get it re tuned it should make over 500 whp now that it has forged rods and pistons.
@BurnNrubber
@BurnNrubber Год назад
I’m 3 years late on this vid, but is there any way you could respond to this comment with a link directly to the turbo kit.
@bryantb3391
@bryantb3391 4 года назад
Im planning a high compression big cam high rev manual mustang and throw a bottle in er for some extra fun
@jj_steezy
@jj_steezy 3 года назад
Stock internals ?
@Greenlightfilming
@Greenlightfilming 3 года назад
Cobra pistons and rods I believe. Factory ford parts.
@organicsoulgumbo
@organicsoulgumbo 4 года назад
That shit is sweet! 😘
@Megacatares
@Megacatares 4 года назад
Why does this not have subframe connectors 🤷‍♀️🤦‍♀️
@Greenlightfilming
@Greenlightfilming 4 года назад
I couldnt answer that for you! Maybe the man himself will chime in on it .
@blown87gt
@blown87gt 4 года назад
Worried about making power first, it's more fun lol.
@jakobjohnson2497
@jakobjohnson2497 3 года назад
What is the name of that bumper
@Greenlightfilming
@Greenlightfilming 3 года назад
It's a "Cobra" front bumper cover.
@maciasd303837
@maciasd303837 3 года назад
Does this car have a cam in it?
@Greenlightfilming
@Greenlightfilming 3 года назад
Yes it does!
@maciasd303837
@maciasd303837 3 года назад
@@Greenlightfilming what cams are being ran in this car
@tylermount9544
@tylermount9544 5 лет назад
i was there
@Greenlightfilming
@Greenlightfilming 5 лет назад
You up on the lookout area?
@tylermount9544
@tylermount9544 5 лет назад
yeah!
@Greenlightfilming
@Greenlightfilming 5 лет назад
@@tylermount9544 ok I figured haha. Nice meeting you guys, thanks for subbing! I think I've seen you at shows before too.
@omaralhajeri2112
@omaralhajeri2112 3 года назад
0-60?
@Greenlightfilming
@Greenlightfilming 3 года назад
You'd have to ask the owner! I don't know offhand.
@elsey1976
@elsey1976 4 года назад
Nice license plate frame
@drh-ov7eq
@drh-ov7eq 4 года назад
New Edge
@H00K-KING
@H00K-KING 4 года назад
T45 or 3650
@blown87gt
@blown87gt 4 года назад
It's a built 3650. Hanlon motorsports built it.
@hellsrs470
@hellsrs470 3 года назад
I kept hearing 4.10 gears was good to I put them in my car now first gear is pointless so I think I'll go back with stock gear at least I didnt need to use 5th all the time
@PeterPiccolo
@PeterPiccolo 4 года назад
i live in CT would you be willing to help me tune up and fix my 01 turbocharged mustang cobra? im trying to find someone that knows mustangs and nobody seems to be out there! please HELP ME!! thanks -PeterPiccolo
@Greenlightfilming
@Greenlightfilming 4 года назад
There is probably a lot of good information on one of the many mustang forums online. HPTuners also has a great forum you should check out! I'm far from an expert on tuning anything lol!
@centraltexasfoxbodies
@centraltexasfoxbodies 4 года назад
Why would you put cobra pistons? Super low compression ratio.
@Greenlightfilming
@Greenlightfilming 4 года назад
Lower compression = more boost
@centraltexasfoxbodies
@centraltexasfoxbodies 4 года назад
@@Greenlightfilming hes on 10 lbs... and plenty of cars are running higher compression and boost, 2.0 ecoboost are like 10:1 and run 21 psi of boost, it's all in the tunning.
@Greenlightfilming
@Greenlightfilming 4 года назад
I dont think you get what I'm saying. You will flow more air/fuel into and out of the engine with less compression. I could be wrong but I think cobra pistons are forged too. 20lbs on a 4cyl vs a v8 arent even close to the same amount of air flow as the turbos arent the same size.
@centraltexasfoxbodies
@centraltexasfoxbodies 4 года назад
@@Greenlightfilming wow I've never heard something so wrong in a long time, if a lower compression engine flows more air and fuel in and out it would make more power n/a than a high compression engine. And the 4 cylinder was just for a comparison, so let's use a 2020 gt500, they have 9.5:1 compression. Only 2003 and 2004 cobra has forged pistons, all other cobras that use a 4.6 have hyper pistons and powdered medal rods, but all 4.6 cobra have forged cranks. Again it's all in the tuning.
@Greenlightfilming
@Greenlightfilming 4 года назад
@@centraltexasfoxbodies dude I was talking about a lower compression engine with boost. Not NA lol. You just agreed with my point other than that. Why wouldn't ford make a 2020* cobra motor high compression if it makes more power safely with boost?
@JBarnes917
@JBarnes917 4 года назад
4.10 is wayyyyyy to much gear for a turbo
@Greenlightfilming
@Greenlightfilming 3 года назад
Right, that's one thing the owner is well aware of. The gears were installed long before it was turboed.
@Ayden-wt4xi
@Ayden-wt4xi 3 года назад
I’ve got an 03’ V6 and it already sucks on gas but it’s probably cause I busted out the cats and put cherry bombs on it 😂 I couldn’t imagine how much you fill that beast 😂
@emptyendeavor2762
@emptyendeavor2762 3 года назад
Did this guy seriously say this car doesn’t have tubular control arms. He does know they did a shot of the underside of the car while driving right? You can see he has an aftermarket K member, and tubular a arms lol what a joke.
@Greenlightfilming
@Greenlightfilming 3 года назад
He was talking about the rear end's control arms.......
@alphathefirstone1222
@alphathefirstone1222 3 года назад
The 4.6 2v Sound is not touchable.. I have not heard any engine ever that sounds better than a stock or even a cammed 4.6 2v.
@alexanderfontenot87
@alexanderfontenot87 3 года назад
Turbo 2vs don’t sound good on decel for some reason
@marcellpeterson129
@marcellpeterson129 4 года назад
"Its a stock 4.6 with cobra rods and pistons with a on3 turbo at 10psi..." turns on car and it has a nasty cam... please dont say stupid shit like this making people think a mustang can make good power without crazy mods. LS dont even need rods and pistons or cam just a shit turbo to blow this junk out the water
@Greenlightfilming
@Greenlightfilming 4 года назад
Ok there big guy lol
Далее
Forged 4.6L 2V Engine Build Price Breakdown
14:22
Просмотров 8 тыс.
On3 turbo 2v review
3:44
Просмотров 5 тыс.
The BADDEST Mach 1! Twin Turbo sounds and pulls!
15:51
What’s in my 1000+ hp turbo 2v?
13:14
Просмотров 42 тыс.
This is what a 50% increase in horsepower looks like
6:26
How to degree the cams on the Ford 4.6L 2V SOHC.
44:24
Просмотров 258 тыс.