Тёмный

OPAL INLAY RING from scratch 

GomeowCreations
Подписаться 154 тыс.
Просмотров 487 тыс.
50% 1

I was inspired by Pablo Cimadevila and his amazing videos along with his masterful jewelry design. I wanted to see what it was like to make a videos in his style just to see how much work was involved in making one. This was very humbling just seeing how much work goes into making a video like this. That being said I still don't even feel that my video is close to the level of Pablo's work.
Just to give some info about this video. It took me 3 days to shoot the 110 clips needed to make this video and it was about 25GB of 1080p video. Editing this video took me another 2 full days. I do find this video style to be very rewarding to make but it takes a lot of time, planning and work to get it done right 😅
Looking to save some money on Turquoise? Use code "gomeow30" and get $30 off your first order of $55 or more on turquoisemoose.com/
If you are looking to get some Starbond CA glue just use this link and use my code "GomeowCreations15" at checkout to save 15% on your order and free shipping. bit.ly/StarBond
Here is a list of the tools that I used in this video if you are interested.
Ring Stretcher - bit.ly/RingStretcher
Polishing Master Kit - bit.ly/PolishingMasterKit
Foredom Classic Jewelers Kit with H.30 Handpiece - bit.ly/K2230
Steel Mandrel - Gold Standard - bit.ly/GoldRingMandrel
Finger Ring Sizer - bit.ly/RingFingerSizer
PepeLube Cut Lubricant - bit.ly/PepeLubeLubricant
Jewelers Pliers Set - amzn.to/31uksyK
Anvil & Bench Pin - amzn.to/31rsDvN
Brass Caliper 4" - amzn.to/3a5iIQh
Hard Charcoal Soldering Block - amzn.to/33wbG69
Soldering Tripod - amzn.to/3knvfmU
Polishing Compound - amzn.to/3fEnPrU
Silicone Rubber Polishing Wheels - amzn.to/3kmlMMU
Silicone Finger Protectors - amzn.to/2XAu61L
Wool Felt Polishing Pad - amzn.to/3idGUD2
Wooden Ring Clamp - amzn.to/2EZY0Gh
Miter Vise Jig/Tube Cutter - amzn.to/2F07Ckk
Hand Files - amzn.to/33wcCaF
Wet Dry Sandpaper - amzn.to/3a1O7De
Ring Mendel for lathe (Use Code GomeowCreations at checkout) - ringsupplies.com/
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month / gomeowcreations
4. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
Music provided by Monstercat:
Direct & Park Avenue - I'll Go
/ monstercat
/ monstercatinstinct
Music provided by Monstercat:
CloudNone & Direct feat. Matt Van - Lost and Found
/ monstercat
/ monstercatinstinct
#PabloCimadevila #ringmaking #opal #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations

Хобби

Опубликовано:

 

6 авг 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 344   
@PabloCimadevila
@PabloCimadevila 3 года назад
Great video!! I´m so happy that other artists are showing the art of jewelry to the world. Love the music choice To improve: I miss the tool´s sound Keep creating! ❤️
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much and I will be sure to keep the tool sounds in future videos. 😁👍
@PabloCimadevila
@PabloCimadevila 3 года назад
@GomeowCreations ❤️💪
@PepetoolsUSA
@PepetoolsUSA 3 года назад
;-)
@PepetoolsUSA
@PepetoolsUSA 3 года назад
Pablo is an inspiration to all of us!! Thank you Pablo and congrats Randy on the KINGS approval ;-)
@PabloCimadevila
@PabloCimadevila 3 года назад
@@PepetoolsUSA now that we don't have King in Spain.... 🤣🤣🤣🤣🤣❤️
@GoldSmithJack
@GoldSmithJack 3 года назад
Very Creative and Beautiful work I am also inspired by Pablo Cimadevila to show my talent to all the beautiful people out there....😍 Keep Making Videos
@GomeowCreations
@GomeowCreations 3 года назад
I was inspired by Pablo Cimadevila and his amazing videos along with his masterful jewelry design. I wanted to see what it was like to make a videos in his style just to see how much work was involved in making one. This was very humbling just seeing how much work goes into making a video like this. That being said I still don't even feel that my video is close to the level of Pablo's work. Just to give some info about this video. It took me 3 days to shoot the 110 clips needed to make this video and it was about 25GB of 1080p video. Editing this video took me another 2 full days. I do find this video style to be very rewarding to make but it takes a lot of time, planning and work to get it done right 😅 Looking to save some money on Turquoise? Use code "gomeow30" and get $30 off your first order of $55 or more on turquoisemoose.com/ If you are looking to get some Starbond CA glue just use this link and use my code "GomeowCreations15" at checkout to save 15% on your order and free shipping. bit.ly/StarBond
@sampokemppainen3041
@sampokemppainen3041 3 года назад
Small tip. You need no bees wax if you select the saw blade so that at least two teeth matches the tickness of the material. Reduces the snapping also.
@georgealderson4424
@georgealderson4424 3 года назад
You did a fine job with both the manufacture of the ring and the making of the video sir. I was a bit confused (it's not hard ro confuse me!) about who I was watching at first but enjoyed the experience in any case! Blessings and peace
@melindawilliams1833
@melindawilliams1833 3 года назад
These type of videos will get you followers galore. And you deserve it. Very talented. I see where you said you watch Pablo the magnificent. Amen brother!
@yarow306
@yarow306 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cIyH9dkevwU.html ...
@michelleknight7362
@michelleknight7362 3 года назад
@@georgealderson4424 I enjoy watching Randy work. I personally have learned so much from him. If you have watch his recent videos Randy I have been going through a rough time. And you probably already know this if you do watch all of his videos like I do. And this video he did with the music was a complete 180° then his usual videos. I found it extremely refreshing and I’m hoping that Randy is finding himself again. But I’m really glad that you noticed the difference the change in this video. The fact that you were not sure who you were watching because it was so different. I think that was what Randy was trying to get across to all of his fans... and he did it because you had to do a double take, I had to do a double take. I haven’t read all the comments but I think the video with the music was fabulous. And to Randy you will definitely get the hang of doing music videos. You’ll be able to do them in your sleep eventually. You are a perfectionist Randy. But that’s OK too and that’s what makes you an excellent jewelry designer and teacher...
@robpetesworkshop
@robpetesworkshop 3 года назад
Great work Randy! Yeah Pablo is amazing he definitely raised the bar higher in jewelry making videos in the way he shoots scenes and edits his videos , he is an inspiration for all of us. Really enjoyed watching this video 👍
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😊 👍
@NoyesDesignsjewelry
@NoyesDesignsjewelry 3 года назад
Beautifully done. Love the filming and design of this one. Pablo is such an inspiration for me too
@GomeowCreations
@GomeowCreations 3 года назад
Thank you and yeah making art out of making art is a very interesting concept. 😁
@lady_be
@lady_be 3 года назад
WOOOOOW. What a beautiful video, work and job. I watched it with my mouth open. Really awesome. Thank You! Ring looks so great.
@michelleknight7362
@michelleknight7362 3 года назад
I love the music ..... Great Job Randy🤗🤗🤗🤗
@GomeowCreations
@GomeowCreations 3 года назад
😁
@susanncarter6201
@susanncarter6201 3 года назад
That was a beautiful video, Randy, very relaxing. I always enjoy your original style too! You are inspiring to me.
@GomeowCreations
@GomeowCreations 3 года назад
Well thank you very much 😊
@u2ooberboober
@u2ooberboober 3 года назад
Very nice! I’d like to have a ring like that one. Now i understand how some of my rings have been put together.
@kimbain4368
@kimbain4368 3 года назад
This is absolutely beautiful! Thanks so much for showing us the process and technique.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 👍
@sylviaprudhomme5417
@sylviaprudhomme5417 3 года назад
So well done. Beautiful to watch and music perfect fit. EXCELLENT!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you and the music was a hard thing to pick for this and seeing that I had to use 2 full songs and make sure they worked together 😅👍
@TheButtons15
@TheButtons15 Год назад
so satisfying to watch this video thank you !
@GomeowCreations
@GomeowCreations Год назад
😁
@HabibahW
@HabibahW 3 года назад
This was awesome! Loved the visuals, you were right all that hard work paid off. Your rings are never disappointing. Keep up the good work man!👍
@GomeowCreations
@GomeowCreations 3 года назад
Thank you and I'm happy to hear that you liked it 😊
@LeeOfBent
@LeeOfBent 3 года назад
Awesome video. Beautifully done and just what I needed today. Thanks!
@GomeowCreations
@GomeowCreations 3 года назад
Thanks and I'm happy to be able to brighten your day a little bit 😊👍
@michelleknight7362
@michelleknight7362 3 года назад
I never get tired of this video.. The music is so beautiful and the lyrics are so heartfelt it really draws you into your video... but this time I was listening to the lyrics waiting to watch you use the star bond glue and how you placed your gem chips onto the ring I began to cry. It wasn’t a bad thing it was a good thing. Randy thank you for everything you do!!! You are amazing!!!
@taiwoakindele4115
@taiwoakindele4115 2 года назад
Do you know the song tittle?
@icatz
@icatz 3 года назад
You are so freaking organized and talented I can't stand it! Thanks for sharing your expertise.
@GomeowCreations
@GomeowCreations 3 года назад
Haha well thank you very much for your kind words 😊
@congruewoodworks1474
@congruewoodworks1474 3 года назад
I love opal, this was a great video!
@juliecorrall6827
@juliecorrall6827 2 года назад
Stunning x
@victoriareffin2429
@victoriareffin2429 2 года назад
Stunning! I wish I had these skills.
@sherrys.2259
@sherrys.2259 3 года назад
You make it look easy! I will make a few tweaks to my processing...
@myjewellerygarden_8628
@myjewellerygarden_8628 3 года назад
Beautiful - a pleasure to watch from another @pablocimadevila fan :)
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁
@dipaknarayanjoshi6579
@dipaknarayanjoshi6579 3 года назад
Beautiful !
@meflagg3741
@meflagg3741 3 года назад
just beautiful!!!
@tasos652000
@tasos652000 3 года назад
amaizing work. from greece . i love it
@pbjsilverstudio4882
@pbjsilverstudio4882 3 года назад
Wow, that’s really beautiful!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😊
@unboxingreviews5327
@unboxingreviews5327 3 года назад
Mesmerising really
@johnthomas6224
@johnthomas6224 3 года назад
I still enjoy watching your work man it’s beautiful.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😊
@Norrad01
@Norrad01 3 года назад
Damn you and your videos! You're making me want to ease into making rings like this. All kidding aside, thanks for making the videos, and the rings are beautiful.
@numismat8611
@numismat8611 3 года назад
Классное кольцо! 👍
@arnework5919
@arnework5919 3 года назад
I would like to see more Videos like that. Its amazing and satisfying to watch it.
@GomeowCreations
@GomeowCreations 3 года назад
I will be making more but I will still make my other type of training videos too. That way people can make the stuff I'm showing off haha
@StacyClark73
@StacyClark73 3 года назад
Big step up Randy! Well worth the effort for sure, paid off.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much, I was fun to make 😁
@beads2yarn
@beads2yarn 3 года назад
That was so awesome!!!!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you! 😁👍
@Gantzz321
@Gantzz321 3 года назад
beautiful ring would like to have seen more of a radius on the inside edge.
@EmaRadovanovic
@EmaRadovanovic 3 года назад
Very nice, beautiful ring and video too!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁👍
@inderpalkaur9320
@inderpalkaur9320 3 года назад
Great .....made the the job so intersting.video is really good to watch every thing is so clear..it was so nice. Leared many new things too.love to watch .Its really very informative.
@GomeowCreations
@GomeowCreations 3 года назад
Well thank you very much. I don't have longer videos of me explaining everything too if that would help
@juliel6254
@juliel6254 3 года назад
Awesome video. Loved your music selection!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😊
@StresslessTressess
@StresslessTressess 3 года назад
Awesome! Great job.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁
@guilaureanti11
@guilaureanti11 3 года назад
amazing production, sooooo good to watch
@GomeowCreations
@GomeowCreations 3 года назад
Thank you, I'm very relieved to hear that 😅👍
@carolstewart1704
@carolstewart1704 2 года назад
Just straight awesomeness right there 😎🥰
@GomeowCreations
@GomeowCreations 2 года назад
Thanks
@jettevittrup9935
@jettevittrup9935 3 года назад
Beautiful 😊👍
@harrygrimley4352
@harrygrimley4352 3 года назад
As an experienced jeweler I wanted to say, you sir are an artist. Hand tools are so old school. Nice job.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much, that means a lot to me 😁👍
@harrygrimley4352
@harrygrimley4352 3 года назад
@@GomeowCreations and the video was very good also
@getlost692
@getlost692 3 года назад
Cool ring
@antoonsteyn3240
@antoonsteyn3240 3 года назад
Wow, gorgeous!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁👍
@philruthven6905
@philruthven6905 3 года назад
I knew immediately who'd inspired you for this! You've captured that spirit well, bravo. You do amazing videos yourself and, although we've never met, you've made the deepest impact on me. Your rhythm, speed, clarity and style see why I make rings. Don't think for one second about changing how you teach.
@GomeowCreations
@GomeowCreations 3 года назад
Haha I'm very happy that I was able to capture the same feeling of that video style 😁 I don't plan on changing how I make my tutorial videos but I do want to make more videos like this one every so often 👍
@lillygirl7238
@lillygirl7238 3 года назад
Just so gorgeous.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😊
@sparkselot4092
@sparkselot4092 3 года назад
Man, that looks like so much fun! I'd love to have a hobby shop and do stuff like this.
@GomeowCreations
@GomeowCreations 3 года назад
Thanks and you can for not too much money. That being said you will not have some of the high end tools but you can still make it work. 😁👍 I have a video showing how to make an inlay ring without a lathe.
@flavorman9159
@flavorman9159 3 года назад
I started making jewelry in April with an investment of about $1200 and I have made my money back twice since then. You can do it Edit: A $14 harbor freight butane torch goes a long way
@GomeowCreations
@GomeowCreations 3 года назад
Yeah you are right if you really work at it. I like the $20 propane plumbing torch myself 😁👍
@albertahmeti2614
@albertahmeti2614 3 года назад
Beautifully done
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😁👍
@gordo6202
@gordo6202 3 года назад
Great video. Thanks for sharing. 😃
@GomeowCreations
@GomeowCreations 3 года назад
No problem and thanks for watching 😁👍
@richardharris5582
@richardharris5582 3 года назад
That's is some very fine work
@GomeowCreations
@GomeowCreations 3 года назад
Thanks you 😊👍
@Paulstluke
@Paulstluke 2 года назад
Great vid bro, I stopped doing these inlay rings due to low prices we now get for them hard to make any profit from the demanding work and art skill wet it takes when you look on Etsy even Amazon prices are cheap- I work in mainly gold now and sometimes silver. Keep up the great vids I really enjoyed watching
@davidfernandez5677
@davidfernandez5677 3 года назад
Pablo saludos cordiales desde la Argentina...vos sos el verdadero señor de los anillos... excelente como siempre
@d.e.maclean1004
@d.e.maclean1004 3 года назад
This was beautiful. Definitely your time wasn’t wasted.
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁
@billsaunders1879
@billsaunders1879 3 года назад
Excellent job on the ring and video. What speed do you set your lathe at?
@bohdankryher9456
@bohdankryher9456 3 года назад
Wow Randy... great work! And to be honest Pablo is like inspiration lvl universe to me as well, but, alas, I lack too much equipment to even attempt some works... Kudos to you! We want more! 👍👍👍👍👍😁
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😊 I hope to be able to continue to make videos like that along with my helpful ones. I have been uping my game in my videos as of late. I have been using b-roll when that was something I have never done in the past.
@bohdankryher9456
@bohdankryher9456 3 года назад
@@GomeowCreations Man it shows! I know how hard it is to create AND film AND edit the film... so yeah you've come a long way [I need to nag about still using my phone to film LOL]. Also have I mentioned I absolutely love the fact that you make the inlay rings without a lathe? 🤯
@GomeowCreations
@GomeowCreations 3 года назад
Yeah, I did a lot of videos just using a galaxy S3 for some time. I have upgraded my camera and just got a better lens to get detailed shots. Also yeah making inlays without a lathe can be done like I showed in my video about it but a lathe does make it a lot faster haha
@Code.404.
@Code.404. 3 года назад
That is so satisfying to watch.
@GomeowCreations
@GomeowCreations 3 года назад
Well thank you. I hope I can make more like this in the future 😁👍
@Code.404.
@Code.404. 3 года назад
@@GomeowCreations I hope you do too. I wish I had your talent :)
@mesmer1218
@mesmer1218 3 года назад
Nice craftsmanship!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😁👍
@a.gallant3219
@a.gallant3219 3 года назад
Very beautiful and inspirational
@GomeowCreations
@GomeowCreations 3 года назад
Well thank you 😁👍
@Sergey-Master-LOMaster
@Sergey-Master-LOMaster 3 года назад
Super job...
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁
@patriciawhitehead1976
@patriciawhitehead1976 3 года назад
Beautiful.
@GomeowCreations
@GomeowCreations 3 года назад
😁
@TJ-kc8vr
@TJ-kc8vr 3 года назад
Thank you for sharing yet again!!! So glad you are back and up and running. May I ask, what is the gage of the silver sheet and square wire?
@GomeowCreations
@GomeowCreations 3 года назад
Thanks and it's good to be back. The sheet is 0.6mm and the wire is 1.3mm 😊👍
@marcelofigueirafigueira4361
@marcelofigueirafigueira4361 3 года назад
Amazing
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁👍
@deeoneal1267
@deeoneal1267 3 года назад
Great job on the video and the ring . I loved the music and the lighting. The video was very “sexy” ;). Thanks
@GomeowCreations
@GomeowCreations 3 года назад
Well thank you very much 😊
@marcosduran1443
@marcosduran1443 3 года назад
Pretty ring!😀
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁
@Hard_Parked
@Hard_Parked 2 года назад
Where did you buy the metal trays you held the opal inlay material in? I've been looking everywhere for those?
@iandavidson481
@iandavidson481 3 года назад
Great video.
@GomeowCreations
@GomeowCreations 3 года назад
Thanks 😁
@ellazhen6940
@ellazhen6940 2 года назад
Hi! I love all of your beautiful works and videos! Could you tell me what's polishing tool that you used in end of the video? It looks like a spinning ball vise(with foot pedal) and there's a triangle filing attachment to polish the stones.....and what's the black compound you use to polish the stone? Looking forward to your answer and thanks in advance!!
@daveschozer6166
@daveschozer6166 3 года назад
Very Cool 👍👍
@GomeowCreations
@GomeowCreations 3 года назад
Thanks 👍
@kinderjojomojo
@kinderjojomojo 3 года назад
I don't know Pablo, but this is bloody awesome!!
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much and you should check out his work.
@kanalidey
@kanalidey 3 года назад
Прекрасно!!! 👍👏
@GomeowCreations
@GomeowCreations 3 года назад
😊👍
@jaslyneramirez9230
@jaslyneramirez9230 3 года назад
Amazing.
@GomeowCreations
@GomeowCreations 3 года назад
Well thank you
@judystone3646
@judystone3646 3 года назад
Fantastic video! I have a question though, you've used a square wire to create your ring, in the place where I live such wires are not common, do you think it would be possible to use a regular round wire?
@chinoching-topic
@chinoching-topic 3 года назад
Beautiful right here yeeeeeeeeeeeee
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁👍
@chinoching-topic
@chinoching-topic 3 года назад
GomeowCreations you welcome
@melyann81
@melyann81 11 месяцев назад
Can you please share the full machine detail of the lathe. (A full purchase if what's needed) I only see the attachment for rings from most videos.
@macariomota8923
@macariomota8923 3 года назад
Impresionante piezas únicas excelentes diseños
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😁👍
@abynoura7253
@abynoura7253 3 года назад
My 1st time watching ur video... u remind me of pablo.... :)
@GomeowCreations
@GomeowCreations 3 года назад
Haha thanks 😊 that is what I was going for in this video.
@abynoura7253
@abynoura7253 3 года назад
Thats a great choice!!! Keep up the good work... may u get tons of subscribers!!! U have my support
@ALIHASSAN-xh3xf
@ALIHASSAN-xh3xf 3 года назад
GREAT WORK BRO
@GomeowCreations
@GomeowCreations 3 года назад
Thanks 😁
@bentley9249
@bentley9249 3 года назад
Well done from a previous Jeweller
@marziabrusa4381
@marziabrusa4381 3 года назад
Complimenti 👍👍👍❤️❤️❤️Bravissimo ❤️❤️❤️👍👍👍
@GomeowCreations
@GomeowCreations 3 года назад
😁
@turkiosm8650
@turkiosm8650 3 года назад
skillful work 👍
@GomeowCreations
@GomeowCreations 3 года назад
Thank you very much 😊
@songsalon7868
@songsalon7868 3 года назад
I'd buy it... Tool & Talent goals...
@GomeowCreations
@GomeowCreations 3 года назад
Well I could sell you one if you would like it or your could try to make one yourself 😁 I have tutorials showing how to do it
@MrJjhemi
@MrJjhemi 3 года назад
Very nice
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😁
@PrinceCezar27
@PrinceCezar27 3 года назад
Dope Video, You just showing off now lol. I need to know how to do ALL of that.
@GomeowCreations
@GomeowCreations 3 года назад
Lol here you go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3CCiTSnBwfQ.html this will go over everything I did. 😁👍
@sarahazem9176
@sarahazem9176 3 года назад
Wow! I love this and the whole inlay series is incredible. I wanted to ask if it’s okay to use normal round wire and not the squared one?
@GomeowCreations
@GomeowCreations 3 года назад
You can but you will have some problems getting it flat on the side and hiding the gaps from soldering it
@alisonlewis2680
@alisonlewis2680 Год назад
I’m looking for a lathe but know nothing about the. Can I use a wood lathe for this?
@punit_langalia
@punit_langalia 2 года назад
Hello sir ring is nicely done! 👌 Can u plz tell me which liquid do you use for sticking stones and also for upper side shining and sticking? I am from India and I want to make it. I am also a goldsmith.
@yannick7570
@yannick7570 3 года назад
Superbe video .tks so much for share . 👍👍
@GomeowCreations
@GomeowCreations 3 года назад
No problem and thank you 😁👍
@adriansorin9291
@adriansorin9291 3 года назад
Excellent work, and indeed great filming. What is the resin (or glue) you used for fixing the opal bits? It takes well the polishing... Thank you
@GomeowCreations
@GomeowCreations 3 года назад
So I use the CA Glue from Starbond, I also work with them so I have a 15% off code if you want to get anything from them "GOMEOWCREATIONS" bit.ly/StarBond As for resin I use this UV resin for now but I'm still looking for other options. amzn.to/39lUrpi Let me know if that helps and if you have any other questions 😁👍
@-KoreanJewelryTechnician
@-KoreanJewelryTechnician 3 года назад
오팔 인레이 반지 예뻐요~^^
@idahocreator2491
@idahocreator2491 3 года назад
Again awesome video. I have just started making opal inlaid rings. Im javing a problem of cloudyness though. What do you use for a final sealer. By the way I have figured out the jump ring maker so that I am not beaking blades.
@GomeowCreations
@GomeowCreations 3 года назад
Hey! I hope you are doing well and it's good to hear that you are having better luck with the blades. What are you using as a glue? I used a UV resin in this video but if you would like to use a good glue that I haven't had any cloudy problems, here is a link. www.starbond.com/?rfsn=3704886.6a727a and you can use code GOMEOWCREATIONS to save some money. I like thin and medium glue with the aerosol accelerator. Also they offer a black, brown and white glue so you have some nice options. If you want the clear resin I use you can find it here amzn.to/2PH42h6 and you need a uv light amzn.to/3ik1qC6 but keep in mind that resin is harder to polish.
@richardball9724
@richardball9724 3 года назад
Thats a lot of work. Looks great tho and I love the video style of pablo
@GomeowCreations
@GomeowCreations 3 года назад
Thank you and it was some very different work and thinking style to get this done. 😁👍
@allanvenon
@allanvenon 3 года назад
Muito bonito bela obra de arte
@GomeowCreations
@GomeowCreations 3 года назад
Thank you 😊👍
@pocatefo1
@pocatefo1 3 года назад
@GomeowCreations es un video maravilloso! Me gustó mucho también otro que vi donde hablas y explicas. Que tipo de adhesivo usas? cianoacrilato tipo loctite?
@GomeowCreations
@GomeowCreations 3 года назад
Watch these videos: 1. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jhpKZFrXw78.html 2. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mZI1F9Hy3Xo.html Links to all the tools and materials in the video descriptions 😁👍
@pocatefo1
@pocatefo1 3 года назад
@@GomeowCreations Thank you! I love your videos.
@alexandredasilveirafoljrin9320
@alexandredasilveirafoljrin9320 3 года назад
É lindo seus trabalhos com jóias parabéns...
@GomeowCreations
@GomeowCreations 3 года назад
😁👍
@brownehawk7744
@brownehawk7744 3 года назад
I may have missed it in the list, but what is used to secure the shards? Is it just epoxy? Or something else?
@beowoofthemoviestar
@beowoofthemoviestar 3 года назад
I had no idea how that work was done, so thank you for the demo
@GomeowCreations
@GomeowCreations 3 года назад
No problem and I have some some videos that go in to full detail if you are looking into doing you for yourself. Just look at any inlay video I have done 😅
@beowoofthemoviestar
@beowoofthemoviestar 3 года назад
@@GomeowCreations I looked for it, did not see it, but will look some more.
@GomeowCreations
@GomeowCreations 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mZI1F9Hy3Xo.html
@beowoofthemoviestar
@beowoofthemoviestar 3 года назад
@@GomeowCreations Thank you ! !
@beowoofthemoviestar
@beowoofthemoviestar 3 года назад
I watched one of those Pablo films you mentioned - the butterfly - can't believe the patience and talent. Thanks again
@lindacreatore1628
@lindacreatore1628 3 года назад
Love the video....what did you dip the shank piece in right after you filed the ends before soldering? Was it acetone or something to clean the surface before soldering? I recently saw someone pickle before soldering instead of simply cleaning oils and such off with alcohol or acetone prior to soldering. Thanks
@lindacreatore1628
@lindacreatore1628 3 года назад
Also, what kind of lathe are you using? Metal or wood lathe? Wondering after seeing what you take down the inlay with...tool fixed in rest. And are you using any CA activator? Thanks
@Dan-ji4db
@Dan-ji4db 3 года назад
Wow, talk about production value! I'm exhausted just thinking about how much work went into this. Well done!! Hey off topic but can you recommend any files? I'm using some hardware store cheapos and would like to get some nice wood handle ones.
@GomeowCreations
@GomeowCreations 3 года назад
Thanks and yeah it was a lot of work but as you can see it really shows 😁 As for files, I also use cheap hardware files for the most part but I do have one file that I do really like that I got in a supply box. Grobet USA is what is printed on it. Also I have no files will handles on them, I should 3D print some 😁👍
@Dan-ji4db
@Dan-ji4db 3 года назад
@@GomeowCreations yeah you should! Haha thanks for info 👌
@oleahrens3022
@oleahrens3022 3 года назад
Wonderful video, the effort was definitely worth it! I also have a question: I saw your video yesterday about cleaning silver by using an electrik slow cooker. Can you warm neacid with it? I mean, is there any danger that the solution will somehow etch through?
@GomeowCreations
@GomeowCreations 3 года назад
Thank you and yeah you can use that to warm acids. I would still keep it in it's own glass container. Kinda like a double boiler. Also be careful and used it at low heat along with have your room well ventilated.
@buckshotvinny8746
@buckshotvinny8746 3 года назад
What kind of adhesive?
@freireiter29freireiter8
@freireiter29freireiter8 3 года назад
Did you use real Opal? Can you tell me the measurement of the ring, because i dont know how thin i can turn the material, i would make it, 1 mm each side and 1 mm "deep"(do you think its deep enough that the resin will hold the stone? Awesome work!
Далее
Making a Glow-In-The-Dark Opal Inlay Ring (In-Depth)
20:04
How to make a silver and opal inlay ring using UV resin
39:00
Making a Ring Without a Lathe | Quick Cut 07
9:22
Просмотров 66 тыс.
claw ring making - how it's made jewelry
12:11
Просмотров 1,8 млн
How to inlay Lapis into rings!
10:12
Просмотров 26 тыс.
Making Stainless Steel Wedding Rings With Copper Inlay
11:48
How to Make a Stone Inlay Ring with just a Dremel
5:49
тгк: katylazarevaa
0:16
Просмотров 2 млн