Opel Corsa utility (gamma) Waterpump replacement "guide". Chevy Montana utility

Подписаться 584

Просмотров 24 тыс.

50% 1

The Waterpump on my Opel Corsa C utility is leaking water/coolant badly and I needed to replace it. This is the 1,800cc 4-cylinder, 8-valve, single-cam petrol engine.
So I decided to make a video about it because I didn't want to pay for a workshop to do it for me.
Disclaimer:
I am NOT a professional or had any formal mechanical training, I do this purely as a hobby and this video is for learning and reference purposes ONLY. Please don't use this as a replacement for any kind of workshop/service manual
Please be careful when working on, near or underneath cars. Always use caution and the right safety equipment as well as the right tools where possible.
00:00 intro
01:30 this chapter
03:00 that chapter

Авто/Мото

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@SidneyKoen 2 года назад

Im glad they moved that engine mount above the fan belt, in the corsa lite it sits between it, anyways awesome vid man very informative.

@pauladrigwe2521 3 года назад

We were promised Lewis, daily! It's been two years!

@lewisdaily1489 2 года назад

It is still daily, just days spread out over the years. No lies here, only attempts at trying

@sfisosimelane7479 5 месяцев назад

Thank you for the video 👌

@praveenseetharam1924 Год назад

Great video thanks , helpful will me save time replacing a water pump on mine

@MotheoK Год назад

Thanks for the video

@shannongramani3309 Год назад

Awesome video. Thanks alot for this. My Father in laws bakkie cambelt is slapping the cover so either the tensioner has failed or come lose. Will strip it this weekend coming and replace the belt and tensioner.

@lehlohonolofaku3178 3 месяца назад

loved it

@martinpeete8959 2 года назад

Thanks man

@llewellynjameskinnaird2741 2 года назад

Hi Lewis, great vid. Just trying to find out does anyone have the fuse diagram for.this car. I lost my cover and need it

@lewisdaily1489 2 года назад

www.servicetutorials.com/en/2018/12/24/opel-vauxhall-corsa-c-fuses-and-relay-diagram/ There is a detailed breakdown of the engine bay fuse box for the Corsa C.

@Jonell6678 6 месяцев назад

Hey Lewis, 🎉 rough idling and vibrating what can be the cause?

@MsToshinori 2 года назад

Thank You. What is the proper temperature in this car? 80 C? Mine is 97-99 oC and water is boiling. I replaced thermostat and checked pump. There is no junk in heater on the front. can it be problem with oil pump or something else?

@lewisdaily1489 2 года назад

Howsit, as far as I know (from my newer Corsa D) the temperature is generally supposed to be around the 90 - 98 degree range. The internet says that the temperature for Corsa C (the model in this video) is generally between 85 - 99 degrees. If you're worried that it's running too hot all the time but the temp gauge doesn't show it's running hot, maybe your temp sensor is bad or clogged or something? Don't take my word for it though 😅

@SidneyKoen 2 года назад

If your coolant is boiling then your coolant system isn't building up pressure. If you are adding coolant on a regular basis, check hoses radiator etc for leaks. Also replace expansion tank cap (yellow cap) as those can also fail and let air through. I would say start with the yellow cap as its the cheapest part to replace.

@jacquesduplooy9137 Год назад

Hi Lewis, What are the torque settings for the crank bolt?

@lewisdaily1489 Год назад

Hey Jacques, I searched around for a workshop manual or any kind of torque spec rating on the bolt and I couldn't find any solid info. I made sure to tighten it real snug and so far no issues at all 5 years later.

@TashmonitaDeKlerk-pr5bu 23 дня назад

im strugle to find a waterpump for my corsa 1.8,can you send me the pump number which is sutable for my vehichle

@PsYVla 2 года назад

one question how long will take this kind of service? from this video that I can see 30min?... p.s. I have all parts 😆

@lewisdaily1489 2 года назад

If you have all the parts, all the right tools and you've done this before (or comfortable working on cars), it would probably take 60min to 90min. Otherwise expect it to be a full Saturday afternoon job 😉

@PsYVla 2 года назад

@@lewisdaily1489 I will not do by myself I will go to service but need to know how long take... thanks 😊

@marioreacts4423 2 года назад

Hi, I have a problem with my car it's the same engine as yours. My timing belt wore out, so I went to buy a new belt and fitted it and checked my timing marks to make sure then I cranked it but the belt keeps moving inwards and my car won't start now I really don't know what to do. What would you suggest I do?

@lewisdaily1489 2 года назад

Hey Mario, are you only replacing the timing belt or are you also replacing the belt tensioner and idler pulley?

@marioreacts4423 2 года назад

@@lewisdaily1489 im only replacing the timing belt

@lewisdaily1489 2 года назад

@@marioreacts4423 I would recommend you change the belt tensioner also

@marioreacts4423 2 года назад

@@lewisdaily1489 Okay thank you i will do that. And will keep you updated as soon as possible

@marioreacts4423 Год назад

Hi again, my car still wont start i bought new spark leads with new spark plugs, changed my tensioner and got a new crank sensor but it just keeps backfiring through the exhaust and the air intake when i turn the key on. what would you suggest i check for?