Overview: New L.E. Wilson Case Gage Depth Micrometer

Подписаться 350 тыс.

Просмотров 65 тыс.

50% 1

Please consider supporting Ultimate Reloader on Patreon: / ultimatereloader
-------------------------------------------
Important: See disclaimer at end of video description.
-------------------------------------------
Full Story: bit.ly/26AJQj1
If you are reloading precision rifle ammunition, this is a GREAT tool to have. I show how you can use the L.E. Wilson Case Gage Depth Micrometer along with a case gage to quickly and accurately measure shoulder bump, and setup your sizing die.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- L.E. Wilson
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@jiujitsu2000 8 лет назад

Very nice. Thank you for sharing!

@djRiko454 5 лет назад

Another great tutorial video Gavin! Just received my LE Wilson Case Gage Depth Micrometer and anxious to get my first once fired 6mm Cre brass. Thanks!

@PRACERZ 4 года назад

GREAT vid, very well explained, thanks !

@milboltnut 2 года назад

the gauge measures where the HS is, but you have to size the case to where you want it.... correctly. Fast strokes on your press gives inconsistent readings. Holding down on the end stroke for a few seconds or more allows for proper forming of brass case.

@Muddlol 8 лет назад

Nice piece of kit

@RatelLaw 3 года назад

Very helpful. Thank you.

@DeWoodyard 3 года назад

Nice content!

@ctglockguy743 8 лет назад

I don't load "precision" rifle ammo, but I do use the L.E. Wilson gages. Quality stuff.

@leonardtaylor7976 2 года назад

Good job. Thanks.

@ctech01 8 лет назад

Keep the info. coming.

@user-dt7ic4bz2d 3 года назад

great video but my question is why you don't back out the die 1 full rev. and see rotating in every 1/8 of a turn ?

@jpb-go8qh 5 месяцев назад

Will the Wilson gauge work with Hornady case gauges?

@lnldreamer6083 8 лет назад

Once you determine the best reload from your already existing method, do you then start determining the best bump back depth for further accuracy improvements? Or do you adjust for what gives you the most brass usage?

@AblazeWorship 5 лет назад

Can you just use a bump gauge from Hornady with a caliper

@anitacoco7542 7 месяцев назад

Nice video as with all your vids. Question, where can I get an exploded view of the marks, which is labeled what reading each mark portrays? I'm confused AF how to read the marks and the Wilson instruction are just text and useless to a neophyte like me. Thanks.

@chrisallen3741 Год назад

Do you need to have one of these for each caliber casing or will that one item you show is good for all rifle casings….this only determines if you need to shrink the case back correct?

@anitacoco7542 7 месяцев назад

Is negative 3, three past the O mark going clockwise?

@JB-kf3yb 6 лет назад

So do you need this micrometer too or will just the case gauge work?

@douglasbattjes3991 2 года назад

Gavin, Your checking the length by just holding pressure down on the Micrometer against the Creedmoor gauge / not a glove. gage, then getting your measurement, on your Creedmoor case gauge? Is it only marked Creedmoor on the case Gauge like mine, not 6.5 showing?

@howardschwartz1462 2 года назад

I have discrepancies between the case gauge And the classic comparator. Why?? Which is more accurate?? Thanks

@MrJeffreyg 4 года назад

In a previous video you used your dial indicator and the case gauge to measure setback. Isn't this just another way of measuring it?

@mcmiller233 8 лет назад

Will one micrometer work with all cartridge case gauges or is the micrometer cartridge specific?

@NickFrom1228 7 лет назад

It works with all but you need a case length gage for each cartridge.

@manfredvith4813 2 года назад

Supper

@sheepdawg6946 7 лет назад

I just purchased this tool and do not know how to set recalibration it to zero. It is slightly off. I used the allen tool and removed the screw but get no adjustment. The instructions say nothing about recalibration. Any suggestions?

@Ultimatereloader 7 лет назад

I will ask L.E. Wilson!

@Ultimatereloader 7 лет назад

Wow- heard back already! Here's how you do it: 1 Loosen set screw 2 Back out micrometer top 3 Grab scale portion and turn clockwise and counter clockwise to loosen pressure on set screw pad 4 Dial mic portion back to zero 5 Set on top of Gage Block 6 Turn clockwise until spindle bottoms out on top of Gage Block 7 At this point you zero will be close. 8 Fine tune by moving scale sleeve clockwise or counterclockwise to set zero 9 Tighten set screw

@sheepdawg6946 7 лет назад

Thank you for the quick response. I bought this tool after watching your video. Thanks for the help.

@sebastiengaron4476 4 месяца назад

@@Ultimatereloadercan you make a short video with that Thanks

@dxpvxo711 4 года назад

I really love this guys videos and his knowledge, but I'm not to sure about that haircut

@raoulpabon7562 8 лет назад

for remy 700 r5 I only neck size

@Ultimatereloader 8 лет назад

+raoul pabon Neck sizing is great, but at some point you typically need to FL size (after several neck-only sizings) in order to get the brass back into "chamberable" dimensions.

@raoulpabon7562 8 лет назад

shoot them4 times than aneal and full size and trim works pefect

@georgezeck1396 Год назад

Sorry, you just measured various pieces of brass. Since none are the same - what in the heck are you suppose to do? You talk about “if you are loading precision ammo” but are well beyond those who wish to start vs already there.