P7100 Pump Unreliable? Never Again! | BD Diesel Fuel Shut Off Solenoid Install: 94-98 Dodge 12-Valve

Подписаться 121 тыс.

Просмотров 54 тыс.

50% 1

The P7100 pump on the 1994-1998 Dodge Cummins utilizes a 12-volt electric solenoid that, over time, will stop functioning. Don't let it leave you stranded-get a BD replacement solenoid to keep on hand in case you ever run into trouble.
Watch us install a BD Diesel Shut Off Solenoid on a 1994-1998 Dodge 12-Valve.
Want a BD Diesel Shut Down Solenoid? Order One Today!
www.thoroughbreddiesel.com/10...
► Check Out Our Other Install Videos Here:
• Installation Videos
► Check Out Our Other Dodge Cummins Videos Here: • Dodge Cummins Videos
★ Saving Diesel Lives! Check out our online store for performance products at: www.thoroughbreddiesel.com/
☎ Give us a call for FREE ADVICE: (866) 737-4966
Please remember to SUBSCRIBE, LIKE, and COMMENT if you like our videos! It really does help us out! Thx for the support.
ru-vid.com...
❤ Join our Diesel Community ❤
● FACEBOOK: / thoroughbreddiesel
● TWITTER: / tbreddiesel
● INSTAGRAM: / tbreddiesel
● PINTEREST: / tbreddiesel
● BLOG: www.dieseladdict.com/
● SNAPCHAT: tbred_diesel
Chapters
0:00 BD Diesel Fuel Shut Off Solenoid
0:46 Kit Features
4:11 Fuel Shut Off Solenoid Diagnostics
8:40 Solenoid Removal
11:55 New Solenoid Installation
#cummins #12valve #bddiesel #thoroughbreddiesel #dieselpower #diesellife #dieselporn #truckporn

Авто/Мото

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 102

@genarocastellon8030 4 года назад

Got fuel?

@thoroughbreddiesel 4 года назад

lol

@daveh1187 11 месяцев назад

Thanks for the great video! Have over 630K on my 12V and the solenoid just melted down. New relay and solenoid should get us to 1M miles, Lord willing.

@thoroughbreddiesel 11 месяцев назад

You're welcome!

@AlexB-cn2lo 8 месяцев назад

That's impressive mileage on your 12v, is it original without a rebuild? Also, I am curious what type of cold air intake system you're using?

@jassibrar8418 3 года назад

Love this channel, will be binge watching your channel this weekend !!

@thoroughbreddiesel 3 года назад

Welcome aboard! Enjoy!

@Anthony-bt2vo Год назад

Thank you so much save me a bunch of money I was going crazy not knowing what it could be did the diagnosis you did found out there was a bad feel Shut off keep the videos coming on the 12v

@thoroughbreddiesel Год назад

You're welcome!

@duttydiesel8303 4 года назад

Hi Wade. I'm Dustin. I ♥️ these how to videos! Thanks a bunch, God bless!

@duttydiesel8303 4 года назад

You want to hear about my 12 valve.... It's parked out back with a blown transfer case thanks for asking tho! Lol

@What-ic6hp 4 года назад

Keep the 12V videos coming.

@thoroughbreddiesel 4 года назад

You want them? We got them!

@What-ic6hp 4 года назад

Awesome!

@truckcampertraveler7369 4 года назад

@haroldlypshytz3351 Месяц назад

That!! Was awesome!! Thank you sooo much!

@thoroughbreddiesel 28 дней назад

You are so welcome!

@hondanation9375 4 года назад

Love the how to videos with any Cummins great video wade

@thoroughbreddiesel 4 года назад

Thanks!

@47927411D Год назад

Thanks for showing this, and how it works

@thoroughbreddiesel Год назад

You bet!

@user-rr8vj3uy4f 3 месяца назад

Thanks for showing.

@thoroughbreddiesel 3 месяца назад

Our pleasure!

@michaelmcshane6280 3 года назад

Thanks for a very well done and informative video.

@thoroughbreddiesel 3 года назад

Glad it was helpful!

@vendetta1306 3 года назад

Much obliged

@ssssmall 4 года назад

when you test with the test light when the motor crank ,do you think its suppose to have fire on the holding power to ? or just the pull have it.

@chrismurphy2126 3 года назад

hi. I got a 98 that solenoid (new) wont shut off right away...takes minutes sometimes after ignition off....any idea ?

@mafosa8519 2 года назад

when its deenergized does it spring back or does the motor work in reverse? larry

@brokenarrow7547 4 года назад

Thanks

@thoroughbreddiesel 4 года назад

You're welcome.

@apolinarponce4506 3 года назад

Will that solenoid also fit the 8.3 engine

@ramonbolanos4407 4 года назад

Buenas tardes Amigo desde México la prueba que hicistes con la lámpara de pruebas lo que provastes son corrientes o tierras ,la primera de extremo izq,es tierra ? Y dónde se le di marcha es corriente o tierra ? Gracias Saludos desde Monterrey N.L.Mexico

@cumminschevy5275 4 года назад

Tell me more, love the info 👍

@thoroughbreddiesel 4 года назад

Thanks!

@AlexB-cn2lo 8 месяцев назад

Thanks for the video, I've dealt with this problem on/off & have a new solenoid to put on, just never motivated enough to do it as the problem occurs then goes away but more recently I've had to toggle it manually all the time, so... motivation is coming back lol.. Dinosaur truck is right, but I don't think Dodge made a cooler truck ever, nothing seems as cool as a 2nd gen body with a 12 valve!

@thoroughbreddiesel 7 месяцев назад

You're welcome!

@fisehayehagos7714 Год назад

Thanks 🙏🏽

@thoroughbreddiesel Год назад

You’re welcome 😊

@jenningsmike 3 года назад

It is plug and go I got it installed plugged in and kept doesn't work it open or closed

@sheenamabe5154 3 года назад

What if I’m getting fuel to the injection pump but not injectors

@tuffy16 10 месяцев назад

My 98 12v has no bigger relay and the smaller relay is not connected to anything wonder whats with that? Love yr vids very informative

@thoroughbreddiesel 9 месяцев назад

I would say that they used a aftermarket relay. And I considered that when I made the video but made no mention of it. It will always be the outermost relay, closest to driver side fender.

@syedvalibasha9857 3 года назад

Show the fuel shut off solenoiecd 3 wire supply circuit

@noway7476 4 месяца назад

My 97 ram 3500 5.9 Cummins ' fss wiring harness checks out good when test light proved the ground(black) is good and the power(green) with the key on is good also. But the middle red wire shows nothing with test light and engine cranking. Please advise.

@thoroughbreddiesel 3 месяца назад

That means that you aren’t getting trigger power. Figure out your trigger power source and diagnose from there.

@normanedge3819 3 года назад

On the center pin on plug I have no power

@SHL-ge3wn 2 года назад

I'll never get rid of my 6BT. So easy to work on.

@90dusty 4 года назад

This kit keeps wrecking the relay on the firewall on the pull up operation. I have to manually lift the actuator to get it to stick up and start the truck

@jakecorso921 3 года назад

What relay?

@jesustrevizo3148 4 года назад

Awesome channel. An off topic question.... I have a square body chevy and hopefully install a Cummins any recommendations would be helpful.

@dustindrake6272 4 года назад

Ppump 12v really simple

@TheFordf350superduty 4 года назад

Well your on the right track 12v cummins definitely the best option imho 👍

@jesustrevizo3148 4 года назад

@@TheFordf350superduty I've been trying to search how to videos on this conversion, not much out there for these trucks.

@chadmayr9110 3 года назад

After testing my harness when you crank it over the light doesn't come on so the trucks will still not start. What next?

@jakecorso921 3 года назад

I’m having the same problem

@gregorymarsh4277 Год назад

96 5.9 I have to turn key on then push solenoid in to start after that all good until next time help please

@thoroughbreddiesel Год назад

You will need to check your pull up and hold voltage. Like you say here could be ground as well.

@apolinarponce4506 3 месяца назад

Isn't there a smaller version that saves the screws from pulling out from the hard pull in

@thoroughbreddiesel 3 месяца назад

I haven’t seen that. Actually BD doesn’t offer this solenoid anymore, but the video is still good for install knowledge.

@johndoles3713 2 года назад

You didn’t tighten the bolts on the solenoid

@johnstein3264 4 года назад

I have a question. I just installed a new solenoid from Cummins pull works great hold does nothing. I have 12v and 65-66 amps on the hold line. Truck with stars and the shut down as soon as I stop cranking. I’m stumped.

@ninjaskitches 3 года назад

mines doing the same thing. Did you figure it out or am I just going to replace the solenoid with a dowel going through the firewall and dash?

@Asphaltaperider 2 года назад

Bleed the air?

@stevehardeman7209 3 года назад

97 12v truck starts fine although if I stop at a drive thru when re starting it'll start and immediately die almost as there was no fuel ,solenoid issue possibly ?

@vcummins 2 года назад

A good way to test that is to remove the shut off solenoid and tie the fuel shut off lever in the run position. Start it up and drive it around and see if it does it again.

@eternalbeing3339 2 года назад

Yeah or your idle. Mine did that until I raised my idle.

@stevehardeman7209 2 года назад

Replaced solenoid, hasn't had a problem since 30 minutes we'll spent

@jerryhickey7885 4 года назад

I am currently working on this issue; '96, 5.9, Cummins. Truck starts and runs, for awhile. The engine shuts off while driving and I can restart it when coasting in neutral. After this happens several times, eventually the truck won't start. After approximately 20 minutes it starts and process repeats. I've replaced lift pump and now thinking it is the fuel shutoff solenoid, the relay, or both. Any guidance?

@eternalbeing3339 2 года назад

Adjust the lever of the shutoff selenoid. Loosen the nut, lift the throttle arm all the way up with one hand. then turn the lever in/up until it slips on, tighten the nut. replace the relay and delete the prefilter/fuel heater.

@Tom-mo5yf Год назад

Did you ever figure out what the problem with your 8.3 was. Mine is doing it now when it warms up.

@roycayabyab288 2 года назад

Hi sir, where can I purchase BD fuel shut off solenoid? thank you.

@thoroughbreddiesel 2 года назад

www.thoroughbreddiesel.com/bd-diesel-shut-down-solenoid-94-98-dodge-12-valve-1050250/

@JasonY02 3 года назад

What would I have to do to put it on a toggle switch

@thoroughbreddiesel 3 года назад

Dangerous to go that route, if you are in an accident you wouldn’t want it on a toggle.

@JasonY02 3 года назад

Thoroughbred Diesel like up use the switch for it to pull then turn switch off then ones you turn the key the truck dies

@gregorymarsh4277 Год назад

How to fix no ground on solenoid

@thoroughbreddiesel Год назад

Just need to trace down the ground and clean.

@AmeliagmailcomErik 10 месяцев назад

I have a ram 97 Cummins and battle to turn on changing that part would improve

@thenomad7120 2 года назад

Delete the fss it’s just a matter of time before it is a problem. Install a manual cable for reliability.

@apolinarponce4506 Год назад

The solenoid I have keeps breaking the 2 bolts on top

@thoroughbreddiesel Год назад

Is the solenoid set too tight and causing it to put too much pressure on the bracket?

@apolinarponce4506 Год назад

@Thoroughbred Diesel its adjusted correctly the solenoid is twice as big as the one you show in the video

@monahumada7535 8 месяцев назад

Is this not on your site anymore?

@thoroughbreddiesel 7 месяцев назад

It's been discontinued. BD plans to release a new on in 2024.

@fabiangarcia3577 2 года назад

Why does my solenoid gets really hot?

@thoroughbreddiesel 2 года назад

Possible grounding issue or incorrect wire size.

@223dmr7 4 года назад

How do we get one of those hoodies

@thoroughbreddiesel 4 года назад

www.thoroughbreddiesel.com/products/apparel/hoodies/

@223dmr7 4 года назад

Thanx man

@223dmr7 4 года назад

Do you have a video showing how to install airdog on a 12 valve Cummins?

@thoroughbreddiesel 4 года назад

No we don't. We have a very old 2 part video on a VP44 truck. The install will be pretty similar. The up until it's time install the drawl straw and connect to the PPump

@223dmr7 4 года назад

@@thoroughbreddiesel ok yea I just watched the video were your installing the raptor on the red 01 dually