No video :(

Painting 3D Prints for Beginners Part 2 | How to Prime, Layer, & Dry Brush | Step by Step Tutorial

Подписаться 64 тыс.

Просмотров 28 тыс.

50% 1

✨✨Get the Airbrush Essentials for Beginners Course PLUS the PSI Range Finder for FREE! ✨✨
(for a limited time)
➡️➡️ itsmeadmade.th... ⬅️⬅️
JOIN THE FREE RU-vid COMMUNITY DISCORD HERE:
🔴 / discord
JOIN THE PATREON HERE - LEARN EVEN MORE ABOUT PAINTING:
🔴 / itsmeadmade
How to prime and add the basecoat to your 3d print. Learn how to properly layer acrylic paint on your model using the dry brush technique to bring out your model's details!
We are back to basics! Painting 3D Prints for Beginners tutorial series featuring a super awesome "The Thing" chibi. Welcome to the second part of this four part series on 3D printing and painting basics. In this series, I will be taking you through the entire process step by step to create an amazing painted 3D printed work of art.
If you missed part one, you can watch it here:
✳️ Part 1: How to Finish 3D Prints and Post-Processing for Painting
• Painting 3D Prints for...
✳️ Part 2: This Video!
✳️Part 3: How to Shade, Highlight, and Add Details
• Painting 3D prints for...
Part 4: Coming Soon! 2/11
In this video, we start painting our model. I teach the importance of priming and how to prime your 3D print. Then once we have our primer layer down on the model, I teach how to best layer the acrylic paint for ease of painting.
Painting 3D Prints Basics | How to Properly Layer Paint
• Painting 3D Prints Bas...
Once the basecoat is down, I move on to teaching how to dry brush, which is the primary painting technique used in this beginners series. #drybrushing is super easy to do and doesn't take a ton of time to master. The dry brush technique can turn an okay model into an amazing one.
At the end of this video you will see a bare plastic PLA 3d print transform with only primer and dry brushing with acrylic paints!
Get this Model from Chibi STL
Thing: www.cgtrader.c...
or Get More Here:
www.cgtrader.c...
/ posts
All the supplies I use in this video:
❤️ My Favorite: Magnification Glasses
amzn.to/3uqn01a
Rust-Oleum Sandable Filler Spray Primer
amzn.to/3ro1KH7
Rustoleum Ultra Matte Black spray paint
amzn.to/3siEb1K
Rustoleum flat white primer
amzn.to/3GorAiv
Rustoleum flat gray primer
amzn.to/3GorAiv
Black acrylic paint
amzn.to/3AYRxV6
Vallejo Grey Primer Acrylic Polyurethane
amzn.to/3Lb709d
Makeup brush set
amzn.to/3go2u8Y
Paint Tray
amzn.to/3HqdTB2
Affordable Brush Set
amzn.to/3oqLcfR
Premium Brush Set
amzn.to/35SmgHX
----------
3D print Slicer I use:
ultimaker.com/...
My Cura Slicer Setting Video:
• My Cura Profile Settin...
3D Printers I own and recommend:
FDM Printers I Own
Creality Ender 3:
amzn.to/2OKFHJO
Creality Ender 3 Pro:
amzn.to/3vetq11
Creality CR-10s:
amzn.to/3l4nQK4
SLA Printer
EPAX E10 8K 10.1" Screen Resin Printer:
bit.ly/E10-8k
The Epax Hard Resin I use:
amzn.to/3Mn821z
Wash and Cure Station:
amzn.to/3bWY5bF
Ender 3 and Ender 3 Pro Upgrades:
Glass Bed:
amzn.to/3czNgvx
Capricorn Bowden Tube:
amzn.to/2PTjN83
Ender 3 Pro Silent Motherboard:
amzn.to/3epNuHR
Tools I use for 3D Printing:
Get Perfect Bed Level:
amzn.to/38tDsBR
Glue Sticks for Adhesion:
amzn.to/2PO54uV
Small Pliers Set to Remove Supports:
amzn.to/3rC1a6u
Follow Me on Instagram: / itsmeadmade
Website: www.itsmeadmade...
Music Bed From: / kodymusic_official
Open Music from: www.bensounds.com
#3dpainting #3dprint #acrylicpainting #tutorials

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@ItsMeaDMaDe 2 года назад

Part 3 is coming soon 2/8! If you haven't already watched Part 1, please watch it here -->ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H6DoIZNce3s.html

@Smileeboy1 Год назад

Dude… I can watch you paint all day. This is straight chill mode stuff for me. Learning so much from your channel!

@ItsMeaDMaDe Год назад

Thanks so much man! I’m excited to get to know you in the patreon!!!

@History_Matters 9 месяцев назад

I thought a primer is necessary before using acrylic paint since it helps the latter stick firmly Now I learned that I can simply use acrylic paint as a primer Thanks a lot for the videos , they are very informative

@sweetzombie824 8 месяцев назад

I have to say your videos are some of the best on RU-vid period. You cover off absolutely everything and give the viewer confidence and answer all my questions before I even ask them. Really amazing stuff my dude.

@ItsMeaDMaDe 8 месяцев назад

Wow. Thank you so much! I appreciate the comment. I wish you the best of luck on your future projects!

@markmead4047 2 года назад

the color change is ver dramatic i see the brush importance GREAT JOB !

@ItsMeaDMaDe 2 года назад

THANKS! all about technique.

@AutoEnd 2 года назад

Thanks for making these tutorial videos, They’re very helpfully

@ItsMeaDMaDe 2 года назад

Awesome that was my goal. Glad they are useful for you.

@vbelenpe 11 месяцев назад

Sometimes you feel that you wasted your time with a video, but yours is worth my time for sure. Thank you for the detailed video. I had a lot of ideas and you just made me feel more confident to try them. Great job.

@westdecker 2 месяца назад

This is fantastic! Thank you for taking the time to share this with us!

@rebeltaz123 2 года назад

It's always so good to see others using the Plaid and FolkArt craft paints for their 3d prints! I've tried the "expensive" paints, but I actually prefer the craft paints in most circumstances. Great job and great tutorial!

@ItsMeaDMaDe 2 года назад

I think the more affordable craft paints if used right can produce amazing results. That being said I do also love the more pricy ones like Vallejo paints. I think their is a time and place for each. But as a whole I love my craft paints. I was thinking about doing a face off video. Paint the same model using "expensive paints" vs. "affordable paints" be kinda cool to see the results. Thanks for the comment love to hear peoples opinions hope your still liking the series :)

@itsTERIYAKI 2 года назад

@@ItsMeaDMaDe please do it!

@robmcdonald6808 2 года назад

So enjoy these videos. Now i have a better understanding of why you should add water to the paints and the dry brushing instructions have definitely already elevated my painting skills 10 fold Cant wait for the next video

@ItsMeaDMaDe 2 года назад

That’s so great!!! Glad to here they are helping you. Next one will come out next Tuesday.

@dirkcameron453 2 месяца назад

wow you really covered everyTHING

@rothgamez Год назад

I'm really glad I found your channel, tons of help, thank you!

@ItsMeaDMaDe Год назад

I’m glad you found me too! 😅best of luck on your painting projects!

@Chaucer89 2 года назад

This has some great information. Thank you! Have you ever painted a baby Yoda? That’s what I’m working on now and I would love to see your rendition of him.

@ItsMeaDMaDe 2 года назад

Thanks so much! No I haven’t but I printed a life sized version that took 9 days to print. I plan on painting him. Still trying to wrap my head around how I am going to tackle him. 😅 he will be a video on the future.

@yagoubalabbad1249 2 года назад

thanx man yr rly teacher

@ItsMeaDMaDe 2 года назад

Thanks!!! Hope you liked it!

@tonybenson3897 Год назад

Can a model be primed just using a base paint like black? Or do you have to use a specific primer?

@ItsMeaDMaDe Год назад

Yeah the main idea is to give you a good base layer. Some filaments don’t take paint well and that is when I use a rattle can primer.

@hiaggkappoor4529 2 дня назад

Whats the function of prime then? I thought it was necessary for paint to stick well, but using another acrylic paint as a primer would do it bacuse its a paint itself and might not stick to surface well? Second question is , is it not better to use white for base because it wont reflect darker under the painting ? Im a newbie and i appreciate any help 🙏

@arquitensproduction8001 2 года назад

Another easy to follow guide! Thank you! I do have 1 question, though. I started from painting gunpla many years ago and people from the community emphasized on using thinner instead of water when doing hand brush. However, I've seen several people that painted minis and 3D prints prefer to just use water to thin their paints. My question is, what are the + and - of using water instead of thinner? Thank you once again!

@ItsMeaDMaDe 2 года назад

Thanks glad you enjoyed the video. So… im actually have been asked that same question multiple times. So I am recording a video answering your question I will release it right after this series is all out. It’s a loaded question that isn’t easy to answer in a comment. 😅

@arquitensproduction8001 2 года назад

@@ItsMeaDMaDe Alright! Thanks, much appreciated. Good luck with the series!

@Mizloudmouth7 7 месяцев назад

You mentioned that for the spray cans you use either White Gray or Black depending if the paint job is lighter or darker is that same with using the acrylic paint ? ShouldI use white painter when I am painting in lighter colours?

@alpbartu6724 2 года назад

The video is really good. I wish you continued success, can you please make a figure of Spider-Man, good luck

@ItsMeaDMaDe 2 года назад

I’ve been wanting too. It’s on my list for sure!! Thanks for the comment!

@almuyad5998 2 года назад

thnx ❤️❤️

@ItsMeaDMaDe 2 года назад

Glad to make it. Hope it helped!!

@drewd6083 Год назад

Can you wear the magnifying glasses over your prescription glasses?

@ItsMeaDMaDe Год назад

Honestly I have never tried cause the magnification makes me see really good without my glasses.

@bobblanco2747 2 года назад

Hi. Thank you for your video. I am learning a lot. Just a question. Any reason for the prime to be a black color? Can I use another color? thanks!

@ItsMeaDMaDe 2 года назад

You can prime a model what ever color you want. The purpose is to create an even layer of paint to allow the following layers to stick to the model well.

@GennaiosFX 5 месяцев назад

so you can prime with just acrylic paint no primer?

@PowerAirSimulations 2 года назад

Hey Chris what do you use to dry the models? is that a heater or just a fan? what settings do you put it on to help dry?

@ItsMeaDMaDe 2 года назад

Yes it’s a little space heater. I rarely turn the heat on it. I typically just use the fan function. It never takes long with air blowing on it. A tiny fan would work great. Since this video I also got a tiny solar turntable that spins the part for me while the fan is running. I have to just say if you ever use heat to dry be careful don’t dry them too fast. It can not only melt your piece but if the paint dries to fast it can crack with some types of paints.

@PowerAirSimulations 2 года назад

@@ItsMeaDMaDe I actually made a spinner just like yours how much was the solar one that you purchased that would be awesome if I didn’t have to sit there and spin it by hand.

@ItsMeaDMaDe 2 года назад

@@PowerAirSimulations it was only $9 on Amazon it’s pretty great I’ve been using it a lot. amzn.to/3jHvMBm

@PowerAirSimulations 2 года назад

@@ItsMeaDMaDe thanks Chris I appreciate it

@codigofacil520 9 месяцев назад

❤

@JayJay3D 7 месяцев назад

Everytime i do this i get brush stokes - you dont :( How can i do it but without the brush strokes??

@Psywar30 2 года назад

Another great video! Thank you! I do have a question for you. I'm using acrylic paint on a 3d print and I'm trying to make it look metal. I'm using Createx Wicked Color Pearl Silver for the top coat. My base coat should be black I believe, but I don't have a gloss black paint. I think you need the gloss black base to make the pearl pop right? Do you know if I did the black base and then did a gloss clear coat and then did the silver would that work the same? I'm going to actually pickup some plastic spoons to as well to test.

@ItsMeaDMaDe 2 года назад

First! Thank you glad you liked it! 2. You are on the right track. Get some spoons and test first always! I always save failed prints too so I can test on. 3. I have use a gloss coat on a matte black before you get the same results. So I think if you go that route you should be heading in the right direction. I’ve never used that specific metal paint. But you might want to do a test with some grays too. Just to see the difference might be worth testing a spoon or two. It’s hard to give a straight answer with that kinda stuff when I don’t have specifically what you have to do proper tests. But it sounds like it should work.

@Psywar30 2 года назад

@@ItsMeaDMaDe Thank you!

@kosta6137 2 года назад

Can you prime with a rattle can like you displayed , and then air brush the model ? Or do you have to use the airbrush vellejo primer if your planning to airbrush ?

@ItsMeaDMaDe 2 года назад

Oh no you don’t have to use airbrush. I use rattle can a lot. But only when it’s warm outside. You don’t get a good bond when it’s cold outside and where I live it was still cold when I made this video.

@kosta6137 2 года назад

@@ItsMeaDMaDe thanks for the response ! One more question, if your using acrylic paint to prime the figure, can you always use black , even if the figure will be painted a lighter Color, like yellow or pink ? Or should you use white acrylic paint ?

@ItsMeaDMaDe 2 года назад

@@kosta6137 yeah your primer can be any color. It’s really just intended to give a good coat of paint on your model so the other paints can adhere good.

@ScottieJ448 2 года назад

any chance this stl is available?

@ItsMeaDMaDe 2 года назад

Yup the link is in the description.

@kosta6137 2 года назад

Will this model print fine on a ender 3v2? I want to purchase the file and follow along with your instructions but not sure if it’s a beginner friendly print !

@ItsMeaDMaDe 2 года назад

I can’t speak speak specifically about that machine. But I did print my on an ender 3 pro.

@mahmoudzaefi2958 Год назад

How many minutes does it take for the first layer of paint to dry in front of the fan or without fan?

@ItsMeaDMaDe Год назад

Depends on the paint and how much paint you put on it. It’s really hard to say. You should be able to see it’s dry and when it’s dry to the touch.

@mahmoudzaefi2958 Год назад

@@ItsMeaDMaDe Thank you for sharing your knowledge and experience with us. I just discovered your channel. I will definitely watch all your videos. Thanks again 😊

@hellterminator 2 года назад

To my untrained eye, this model, with all those nice cracks between the rocks, looks like a prime subject for washing. What made you choose to instead paint the whole thing the “shadow” color and then drybursh the “base” color everywhere?

@ItsMeaDMaDe 2 года назад

Yes it could of been washed easily. This is just a beginners series and I didn’t want to add a bunch of extra stuff to it besides paint and a brush when it came to the painting portion. I just wanted to focus on helping people understand the dry brush technique. With any paint job there are infinite ways to paint it. This one is no different. 😁

@ItsMeaDMaDe 2 года назад

I also realize I didn’t answer your question about the two coats. You do a base coat to see if your model has any imperfections they really show up if you do. Then you can sand it down or apply more filler. Then you paint the model. Primer also helps with adhesion to the print.

@hellterminator2295 2 года назад

@@ItsMeaDMaDe Thanks for the super fast reply! I was asking because I'm about to paint my first model and I'm heavily drawing on your older tutorial (the Hulk one) where you used a wash. My model is a stone tower where I thought a wash would be perfect for shading the cracks between the stone bricks. Now RU-vid recommended to me this new tutorial where you didn't use a wash and even took a little jab at the Hulk model, so I was afraid you may have discovered some issue with using ink washes on printed models. P.S.: Sorry for replying from an alt, but it's not coming through on my main. Ever since RU-vid removed dislikes, they really turned those “spam” filters up to 11 and my main seems to be hit particularly hard. Apparently, I'm not allowed to make more than 1 comment a day.

@ItsMeaDMaDe 2 года назад

@@hellterminator2295 so I created the new one to help people new to painting 3D prints. The last one was just really broad and just had a lot of tips. You can follow either one. I still use the old way. Washes are great. I use them for stone all the time. Good luck with your paint job. If your on Instagram tag me in your pic I’d love to see it!

@rustyv6274 Год назад

Lol my wife was with me when I was looking for makeup sponges to spread bondo and I could not find them so I asked and the girl started asking my wife what she was looking for. I said excuse me they are mine

@ItsMeaDMaDe Год назад

Ha ha that’s awesome that has happened to me too.