Peristaltic Pump || DIY or Buy

Подписаться 2 млн

Просмотров 854 тыс.

50% 1

Upload Gerber files for review & order $2 PCBs: jlcpcb.com/quote
Support me for more videos: / greatscott
Previous video: • Original Prusa i3 MK3 ...
Facebook: / greatscottlab
Twitter: / greatscottlab
Thingiverse Model from Ralf: www.thingiverse.com/thing:254956
More project information (schematic, code,....) on Instructables: www.instructables.com/id/DIY-...
You can get the Buy option shown in the video here: (affiliate link)
rover.ebay.com/rover/1/711-532...
Parts list (incomplete, see Instructables for more, affiliate links):
Aliexpress:
1x Arduino Nano: s.click.aliexpress.com/e/_dUL...
1x NEMA17 Stepper Motor: s.click.aliexpress.com/e/_dXs...
1x DRV8825 Stepper Motor Driver: s.click.aliexpress.com/e/_dSh...
1x 10kΩ Potentiometer: s.click.aliexpress.com/e/_dX8...
1x 100µF Capacitor: s.click.aliexpress.com/e/_d7d...
Ebay:
1x Arduino Nano: rover.ebay.com/rover/1/711-532...
1x NEMA17 Stepper Motor: rover.ebay.com/rover/1/711-532...
1x DRV8825 Stepper Motor Driver: rover.ebay.com/rover/1/711-532...
1x 10kΩ Potentiometer: rover.ebay.com/rover/1/711-532...
1x 100µF Capacitor: rover.ebay.com/rover/1/711-532...
In this episode of DIY or Buy we will have a look at peristaltic pumps and find out whether it makes sense to DIY our own version of it or whether we should just stick with the commercial buy option instead. Along the way we will create a stepper motor driver circuit and a suitable 3D print for our DIY version.
Thanks to JLCPCB for sponsoring this video
Visit jlcpcb.com to get professional PCBs for low prices
Music:
2011 Lookalike by Bartlebeats
Killing Time, Kevin MacLeod
(incompetech.com)

Наука

Опубликовано:

17 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@wpyoga 6 лет назад

For the bearings not turning if you tighten the screws too much: You should put a spacer between the 3D printed cage and the bearing itself. The spacer will make sure the outer rings of the bearings are free, but the inner rings will be tight.

@elektronikavlog5495 6 лет назад

Next diy or buy make a 3D printer

@haydenc2742 6 лет назад

Look up Cherry printer in youtube :)

@elektronikavlog5495 6 лет назад

Brian C thanks

@omsingharjit 6 лет назад

Yeah !!! 3D printer using very chep Dvd writers .

@vidznstuff1 6 лет назад

That's been done to death

@ricardo3061 6 лет назад

Seguramente no van a entender ni mierda de lo que estoy escribiendoles pero de todos modos les dejo el enlace para que ustedes lo hagan en casa, bueno me causa mucha pereza hacer lo de la traducción así que aquí les queda todos los pasos. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X4BLydtpllo.html

@oddjobbob8742 3 года назад

Your DIY or Buy YTs are always welcome excellent. No exception here. Thank you for taking the time to produce these.

@djbusters 4 года назад

The idea of Peristaltic pump just solved my idea of slow water pumping for a small plant watering system. Thanks for the great content you keep making.

@northshorepx 6 лет назад

Excellent breakdown of what makes such a pump. It seems that building it from standard components is worth it if you don't have to model (at least not too much) the pump assembly from scratch. I'm in two minds, one side agrees with the diy, but considering the requirement to generate a 3D assembly means that perhaps it's not so clear. Either way I love this set of videos you're making. It's making me ask serious questions about the future of custom making and it's interesting to say the least. Thanks.

@greatscottlab 6 лет назад

Glad you liked it and thanks for the feedback :-)

@danielrouw2593 6 лет назад

I would skip the 3D printer, find some solid material and a drill. For the keyed shaft just make the hole round and use some glue or putty to prevent slip. I would just use a standard dc motor as well. This build is neat, but more complicated than it could be.

@northshorepx 6 лет назад

Yes

@ysz7423 6 лет назад

That is what I’m saying. I like those videos

@GRBtutorials 6 лет назад

That's more true with a good 3D printer and a control system that allows you to turn it on and off without having to plug the cable... mine is a bit of a hassle to set up, especially bed levelling, which is very difficult (I still haven't accomplished it). I'll have to order the auto bed levelling device... I ordered it just a bit too early (there's a new version easier to use)...

@chickennugget2248 6 лет назад

Heart pacemaker. DIY OR BUY?

@Brutaltronics 6 лет назад

*DIE OR BUY?

@zanpekosak2383 6 лет назад

Brutaltronics 😂😂

@BertGrink 6 лет назад

Do you know a surgeon who'd be willing to implant a home-made pacemaker?

@dj_paultuk7052 6 лет назад

@BertyFromDK. Who needs a Surgeon ?. DIY the surgery as well.

@BertGrink 6 лет назад

Paul Taylor now that's hardcore lol :D

@georggross1232 6 лет назад

YES! I've been waiting for the DIY as a winner for months! It might be suitable when I will build a DIY lassi machine. Thanks, Scott.

@edgeeffect 6 лет назад

Thanks for this video... I've been looking for a way to circulate water through a liebig condenser for months... I've been wasting my time trying to get washing machine drain pumps to do the job... Just happened to watch this video simply because it was a Great Scott video... and you're talking about these things I've never heard of "peristaltic pumps"... exactly what I've been looking for... I'm now the proud owner of an old peristaltic pump from an air conditioning unit and my condenser should be getting flooded with icy water any time soon... thanks and keep up The Great Work.

@robertgresham3489 5 лет назад

I have some previous experience with pumps like these, the rotary die cutter I used to operate had one for each print drum. The ones we used had the internal tubes connected to fixed couplings to the outside of the housing. Second, since the hoses had thinner walls so the motor didn't have to work so hard to compress them. Third, their were 3 hoses and the rotors were out of phase like 3 phase electric, meaning one larger motor is able to handle 3 times as much liquid. It's been a long time but if I remember correctly, the hoses we're t supported internally on the structure so the rotary would stretch them slightly improving compression. They were held on to the coupling with hose clamps. This might be more than what you need for this but that's more or less how the industrial variety is constructed.

@jordanjohnson714 6 лет назад

Happiness. DIY OR BUY?

@Sebastian_Koenig_ 4 года назад

You can print Happiness.

@dhupee 4 года назад

@@Sebastian_Koenig_ I saw what you did there

@ratchtex1037 3 года назад

Buy is the only ans

@Comrade_YG 3 года назад

You can say happiness

@silviuivanov1988 3 года назад

DIY

@rbaleksandar 6 лет назад

I'm just about to start automating my tiny herb garden (for whenever I'm away for a while). Having a pump is a must. Thank you for this amazing video!

@NielMistry 3 года назад

same!

@phillpauley6672 5 лет назад

Why am I watching this in the middle of the night? This is beyond my skill level. Back to my normal blacksmithing videos. I still left a like for you because I like the idea.

@lukehunt8757 5 лет назад

Thanks for the inspiration! I made a much beefier version of your design to pump more viscous fluids. On the shaft getting a good fit: next time, undersize the hole slightly and heat the shaft to around melting temp. I just used a lighter for a few seconds. Then slide the shaft on. It's now a perfect fit the first time once it cools. The only negative seems to be slight puckering on the exit of the hole and some cleanup needed for some stray filament. Make sure it's not too hot so you don't burn the filament and ruin the hole!

@DenshiMoe 5 лет назад

One way to ensure that the bearings do not get stuck while tightening the plastic holders is to add three washers that are just as large as the bearing's inner ring for each set of bearings. One will be placed in between the two bearings and the other two will be in between the plastic and the bearings. This way, you can tighten the bolts and ensure that the outer ring of the bearing is spinning instead of the whole bearing which can wear down the bolt. Another alternative is to modify the plastic holder design and add a lip or whatever it is called at the hole where the bearings will have contact with the plastic that is just large enough that the bearing's outer ring will not touch the plastic holder. You will then only need one washer in between the bearings when installing them,.

@ranger175a2w 5 лет назад

always a pleasure Scott. outstanding work.

@diehardmetalhead3797 6 лет назад

i really liked these DIY OR BUY episodes.You are doing a great job GreatScott!

@yankovMuskula 6 лет назад

Make a Welder Inverter , that controls the amps , the duty cycle .

@nojusskrockas4744 6 лет назад

yankov_xxx360xxx_ TOTTALY AGREE WITH YOU

@yankovMuskula 6 лет назад

In a old video he did a transformer welder but it was really un finished and he said he will come back to that project , thats why i sugested it

@JRScience 6 лет назад

Agreed! Would love to see that.

@yankovMuskula 6 лет назад

@Szakembőr TV TMIAE thats the idea , not designing an inefficient transformer welder , but a high efficiency inverter welder !

@Willeexd1337 6 лет назад

ye make a inverter welder with pretty high duty cycle

@JackNWhite92 6 лет назад

I think gauging the price at $15 is way off, once you factor in screws, filament, 3D printer (prototyping, rental, or self-bought) your total is higher than buying one. that being said, great video. and for next project you could look into building the Hakko T12 kit, it’s a cheap soldering iron DIY kit that gives you a professional quality setup.

@ZexMaxwell 6 лет назад

I second on the soldering iron DIY.

@toolsarecool 6 лет назад

Well, if you buy all the tools JUST for making this one thing, you can never be cheaper compared to the cost benefits of mass production. You buy these things, because you like to build things. And if you do it, because you like it as a hobby, your time doesn’t really go into the cost equation. Not for me anyway!

@BubbaCZekLP 6 лет назад

Zex Maxwe

@Hollaendaren 6 лет назад

This. 15 bucks seems a bit optimistic. Bearings usually aren't free either.

@thewolfin 6 лет назад

A lot of things are cheaper to DIY when you already own half the parts. I'd like to see price breakdowns by part (bill of materials) in comparison to the cheapest premade component available. This makes it really easy to subtract the parts you have or can make and come to your own conclusions... Though it's not the most entertaining thing to have in a video.

@JointerMark 6 лет назад

Your video came at a most opportune time! I have a project that requires a peristaltic pump and your video was a wealth of information for me. Thank you very much!

@edslab5383 6 лет назад

For long the best "DIY or Buy" episode. Awesome!

@greatscottlab 6 лет назад

Thanks

@mohammedissa9448 6 лет назад

Have you tried moving liquids of different viscosities? It would be interesting to see if it can move oils, and even more viscous liquids, such as syrup, ketchup or something similar. Great work! Thank you for your hard work.

@mirzacenanovic 6 лет назад

Good video as usual! However, I am concerned with your conclusion, the >500mL/min buy vs your ~200 mL/min diy, the fact that the 3D printed parts and bearings add to the cost and finally the "long life" of the diy is surely uncertain at this point. I don't see much if any advantage of DIYing this pump. What are your thoughts?

@hansdruf9132 5 лет назад

Well and consider the time (time=money) building it; its for sure more of a hassle to just buy it, but then again, if you once know, how its done.... it is an awesome project indeed, anyway.

@mananimal7512 5 лет назад

BUT... if you have a box of spare parts you have salvaged, you can creates a cheap DIY pump

@Helveteshit 3 года назад

He was speaking about the lifespan of the motor itself. That stepper motors appear to have a longer lifespan compared to DC motors of that budget class.

@julienmorris7051 6 лет назад

I don't watch many videos, normally very focused on what I like to watch- but you pop up a lot - and every one is good. Well done

@greatscottlab 6 лет назад

Thank you :-)

@pesterenan 6 лет назад

Man! That was awesome! I wish I had a 3d printer, getting things done with it is so satisfying! Great work "Scott!" :)

@embeddedbastler6406 6 лет назад

Why are you using 1/16 steps instead of 1/2 or full steps so the motor can rotate faster? It should increase the liquidflow per minute.

@roughlygalaxy 6 лет назад

Asked myself the same question.

@titter3648 6 лет назад

The motors does not stall faster with microsteps compared to full steps. And it runs a lot smoother with microstepping. So unless you have a really slow microcontroller it is best to use microstepping at 1/16 or 1/8

@karamiarshia7287 6 лет назад

Wankel Motor can you explain how 1/16 steps change the input signal of driver?

@Theodisker 5 лет назад

@@karamiarshia7287 You need a higher frequency.

@karamiarshia7287 5 лет назад

@@Theodisker thanx but my problem was that it was just a rule of thumb not an exact thing!of coarse higher frequency is going to make it run smoother.

@RajendraBhattRajDa 6 лет назад

Make a diy EEG circuit under budget

@MCsCreations 6 лет назад

Awesome work, man! A guy here from Brazil made a pump like that too, but with pvc boards he made himself from pvc tubes. 😀

@salvygonzy3600 6 лет назад

For me the winner is the diy cause it help us awaken our creativity thank u very much man

@pramod_Kumar.. 6 лет назад

Will you post any videos on your second channel ??

@greatscottlab 6 лет назад

Maybe.....

@annemariemiguel2541 6 лет назад

Hey greatscott, could you build a synthesizer or something similar? That would be great

@annemariemiguel2541 6 лет назад

You could build a simple one like the one here. musicfromouterspace.com/analogsynth_new/ALIENSCREAMER/ALIENSCREAMER.php

@hackeritalics 6 лет назад

Check out "lookmumnocomputers" channel to watch a crazy British mad scientist tweaker dude do such things. :D He made an organ it off Furbys and shows how to do basic modular synth stuff.

@nerfinator03 6 лет назад

hackeritalics holy shit I love that guy

@Drxxx 6 лет назад

that will be awesome

@TitanOne1337 6 лет назад

Someone PLEASE, give this an an award.

@johndue2366 6 лет назад

Hi, I really like your approach to technical issues and solutions. Your ability to explain what you are doing and why is excellent. And your handwriting is just enviably. From a 63 year old B.Sc.EE

@greatscottlab 6 лет назад

Thanks for the feedback :-)

@sumit_kashyap.. 6 лет назад

Can you make Rc 3D printed plane????? Great video!!!

@pramod_Kumar.. 6 лет назад

Interesting !!

@pramod_Kumar.. 6 лет назад

I think Great Scott will read..

@bananobanana1870 6 лет назад

Wouldn't that be a bit to heavy?

@wardy89 6 лет назад

these guys 3dlabprint.com already do 3d printed planes! if you search on youtube you will find reviews of them.

@QuantumFluxable 6 лет назад

there's plenty other people who have loads more RC and 3D printing experience on youtube and they have already done 3D printed RC planes, I would rather see Scott stick to electronics :)

@omsingharjit 6 лет назад

2:28 Yes !! my guess was right !! On FB GS post

@greatscottlab 6 лет назад

Congrats!

@omsingharjit 6 лет назад

GreatScott! Thks for reply

@baconnubs4343 6 лет назад

Stop putting spaces before sentence ending punctuation!

@omsingharjit 6 лет назад

My Grammar didn't Teach me That :)

@danny6nov 6 лет назад

I am a great fan of you. The way you explain is wonderful.

@anuanki 4 года назад

My first viewing of the DIY series. Fantstisch!!!! Ausgezeichnet!

@programer0713 6 лет назад

DIY or BUY: Tube amplifier?

@minitos1 6 лет назад

I'd say DIY for sure. Been building tube amps for about a year now and it's been TOO much fun

@toolsarecool 6 лет назад

minitos1 +100!! As long as you are comfortable and SAFE working with high DC voltages upwards of 350V, it is a very rewarding project to take on. And the sound will leave you speechless... ;)

@nerfinator03 6 лет назад

Dagerman65 one would think you work with it turned off...

@Rouverius 6 лет назад

DIY or BUY: vacuum tubes

@Rouverius 6 лет назад

And then there's Ben Krasnow... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mUcUy7SqdS0.html

@leglessinoz 5 лет назад

DIY is often an option if you have the tools. This project would have been very difficult without a 3D printer or some kind of mill.

@CristalianaIvor 5 лет назад

I guess you could make those parts out of wood without that many problems :)

@Psrj-ad 6 лет назад

Im suprised you havent reached 1mil yet. You quality is just amazing.

@irishwristwatch7544 6 лет назад

Daaanke für das Video du bist die RETTUNG!

@kyliou3016 6 лет назад

Notification pressed faster than light speed

@brucejohnspeedster1626 6 лет назад

Kyliou 301 Good doggo

@kyliou3016 6 лет назад

Bruce John Speedster is not mine :(

@alexanderhiller883 6 лет назад

"DIY or Buy" Lab Pwer Supply

@Passco666 4 года назад

Buy.. If you want to make. you should have constant voltage/constant current, short circuit protection. So it take some time :)

@amelliamendel2227 3 года назад

@@Passco666 a pc PSU has all that

@freevbucks8019 3 года назад

@@amelliamendel2227 it supplies maximum 12v

@djamalidoui5615 5 лет назад

N' i wooseeu nextime ! I like the creativity and professionalism of this guy ! Good job !

@null_carrier 6 лет назад

Excellent tutorial. Thank you for your efforts and keep up the good work!

@infinitepower6780 6 лет назад

WiFi controlled wall socket - DIY or Buy

@dixantchoudhary 4 года назад

Nice idea

@RajendraBhattRajDa 6 лет назад

Why not a simple dc motor ??

@Drxxx 6 лет назад

longlife...

@RajendraBhattRajDa 6 лет назад

But it would have reduced cost even more

@jonathanself3474 4 года назад

Exactly

@sniperownt21 6 лет назад

Your videos are well put together and informative! Keep it up!

@Imotkktomi 3 года назад

This is what I needed for my project! Thank you very much!

@AviatorXD 6 лет назад

diy wireless relay for home automation or buy

@TecSanento 6 лет назад

AVPHT you can easily hack sonoff devices and without voiding the guarantee for the use in 220V home circuits. And because they are mass produced - you will barly get them build cheater than that - i hacked a sonoff touch wall switch and it works great

@fortunateson6070 6 лет назад

The work you put in is a cost too, how long did it take?

@generalzugs6017 6 лет назад

Casey Urquhart Why does it matter? He's doing it for fun. Do you charge yourself your free time?

@alfonssiggler6652 6 лет назад

Good point... If a DIY takes lets say 3 hours to make and saves me 20$ ... well, then i would buy it ... but if you have fun doing it it is ok if it takes 10 hours and saves you 5$ ;) if it feels like work its not worth it saving a few bucks but if it makes fun its worth it even if you dont save a dollar :) .... just my opinion :)

@titter3648 6 лет назад

But the learning you do is an income... so how do you factor that in?

@thewolfin 6 лет назад

Free since he earns it back by producing this video ;)

@michelfeinstein 6 лет назад

It's not cheaper anyway if you consider how much he is paying for flow rate. The BUY option has a lower price per mL/min

@laflaf3d 6 лет назад

Thanks a lot for your clear information. Your channel is very instructive.

@JamienM 6 лет назад

Cool project and good job. Love it

@weaponizergaming9513 6 лет назад

Diy or buy CNC. Or 3d printer. If u can manage it with your other projects and if you have the time. Plss like if u agree

@bob51zhang 6 лет назад

Plus, maybe go for an entirely 3d printed 3d printer? (except for motors and extruders)

@leozendo3500 6 лет назад

DIY or BUY LCR meter.(for use with oscilloscope maybe?)

@omsingharjit 6 лет назад

No !!!! That should be LCRF atleast

@leozendo3500 6 лет назад

Life Changing Realities Fellowship? Lung Cancer Research Foundation? I am talking about a simple yet educational electric circuit. It is also easy to make a video about. I have made a few prototypes and designed the PCB. All seem to work fine. You do have to have a digital oscilloscope though. Idea from ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3Y_WcuIenSM.html

@bluplow 4 года назад

May be way late but if you add small washers the size of the bearing hub, you can tighten them as much as you want and the bearings will spin freely as there won't be any friction against the bearing face, on only the hub. Really cool video!

@CJWarlock 4 года назад

I appreciate the effort. Congratulations on the will to make this and the video about it. :) Cheers!

@splendensregan5270 5 лет назад

Well, first, you have to spend money to buy a 3D printer!

@wernerhiemer406 4 года назад

And the filament including fails and additional helper structures, solder, time, electric power, some hair and or its color. Wait the screws are missing in the above list plus the tubing. Yes there is a completer list but still the content in my first sentence applies.

@Passco666 4 года назад

These days its common to have 3D printer at home, at least some friend should have one.

@groggers 3 года назад

A 3D printer is likely an investment that will pay back over time, provided that you build enough useful projects with it ;)

@LalanDesai 6 лет назад

Usb Soldering iron DIY Or Buy please

@1imanuelarvinjhone559 6 лет назад

Good idea

@LalanDesai 6 лет назад

Allwyn S but DIY OR BUY?

@LalanDesai 6 лет назад

Allwyn S but i wants to watch..

@its_RaviTiwari 6 лет назад

Better buy. Bcz you're here working with 100-240ac volt which can be lethal.. DIY won't gonna be last long.. I have a soldering iron. From last 4years It cost only 150rs to me.

@LalanDesai 6 лет назад

New Here 1 but this can be dangerous

@desidose7340 4 года назад

Educational and inspirational as ever, thx for sharing your knowledge and skills:)

@chrisryan3445 6 лет назад

Thank you for this, I had no idea such a pump existed - I have been working on a bike with broken steel head studs in the aluminium head that I had started eroding out using alum solution. The problem is that the solution needs to be warmed and flowing, the second problem is that all pumps I have have a steel shaft on the impeller would erode from the solution. This pump type would be ideal for my scenario as the lack of fluid contact with the mechanics is perfect. All other methods have failed to remove the studs, whereas even holding them in alum solution for a while using a rudimentary bath has started the process.

@ChristianJoyAzucenas 6 лет назад

Hearing Aid: DIY or Buy

@jeffh3649 6 лет назад

What?

@usmanashraf7068 6 лет назад

I totally agree, they are very expensive. I made my brother a DIY Hearing Aid but it caches noise too. Hopefully Scott reads this.

@pauljs75 5 лет назад

Microphone, amplifier circuit, bandpass filter, ear-bud speaker. (And compare the cost of those as they are to a device with something like FDA approval.)

@mrak6443 6 лет назад

Spot Welder Buy or DIY

@TecSanento 6 лет назад

Please check out the RU-vid videos for Spot welder car battery. there are great cheap and easy projects out there

@papinkelman7695 6 лет назад

Realy enjoyable series.

@b.g.bvoice1142 6 лет назад

scott your like the greatest thing on youtube ...i wait every sundays at about 11:00 for your video your the greatest

@greatscottlab 6 лет назад

You're welcome :-)

@b.g.bvoice1142 6 лет назад

You reply to me thanks you im your greatest fans I watch your video over and over for fun just for support..he reply I'm never forget this day thanks Scott

@joelcarvalho6817 6 лет назад

You forgot include the 3d printer cost...

@matejkadlec2110 6 лет назад

Joel Carvalho you can let local hackerspace or printing farm to print the parts for you

@joelcarvalho6817 6 лет назад

Matěj Kadlec In Brazil we don't have those stuff 😂😂😂

@vladuzz7 6 лет назад

160$ on gearbest :))

@dheujsnrhfydhehehshshhdggsd 6 лет назад

I bought a printer recently complete for 200 ready out of box. I think they are as realistic now for the home shop as a soldering iron or table saw.

@lucasvgc96 6 лет назад

mirrored window where?

@pramod_Kumar.. 6 лет назад

I think you forgot to add cost of 3d printer...

@tiesto97zingesbacsi50 6 лет назад

Thats a one time investment not counts for the price of a pumpm

@tin2001 6 лет назад

You realise the mechanic doesn't add the cost of his tool kit to your car service. The dentist doesn't add the cost of the x-ray machine to your checkup. Yes, they might include a small charge for these things, but it's the cost divided by the estimated number of times they'll use it in its expected service life, not the price they paid for it.

@supercables251 6 лет назад

He also forgot to include the price of the computer(to order the buy pump) so the buy option is over $100 Point is, lots of DIYers have access to 3d printers, and you don't need to buy one per pump.

@MrNigel1340 6 лет назад

Fascinating video Scottt, thank you.

@Kamel419 6 лет назад

I loved this video, gives me some ideas. Thank you!

@emilracovita8421 6 лет назад

Arduino DIY or BUY

@josech5743 6 лет назад

Emil Racovita of course BUY

@alfonssiggler6652 6 лет назад

Emil Racovita Buy... i never had any issues with those cheap arduinos from china.

@maxximumb 6 лет назад

I'm going to make one, just for the experience, also to use the PCB sponsors of Mr Scott. But there is no way I could make one cheaper than the clones from China.

@Drxxx 6 лет назад

better buy..

@nsg650 6 лет назад

already made a diy arduino with built in microphone switch ldr potentionmeter led etc.

@phantom3474 6 лет назад

THAT'S GREAT .. i think the diy is the winner also

@gmplascencia 4 года назад

Thanks Scott, for sharing your projects. and Yes, a 3D Printer / Laser Cutter would be Great!!

@tgirard123 6 лет назад

By the way, you're the only person who designed a cocktail maker that uses weight and not some crazy flow measurement. I really thought that was pretty slick.

@joehinkle8583 6 лет назад

Thank you for your efforts on this project. I grow hydroponic lettuce in my home and looked into automating the nutrient solution mix. This is exactly what many commercial companies use - three to four of these pumps are required required. I found the commercial pump too expensive (purchase + repair cost) so I performed the mixing manually for some time -- and its a daily chore!. I will be using your design when I start the process back up. I have seen several comments that the pricing unjustified your DIY recommendation. For my two cents -- I would consider a one-to-one price match -- still recommending the DIY solution. When you put these pumps into operation (DIY or commercial), they will eventually fail. The cost of repair on the DIY model will be small but the commercial model will need to be a complete rebuy. Thanks again for an excellent article.

@seededsoul 6 лет назад

You're so smart, I applaud you 👏🏾

@qwertyentertainment3349 6 лет назад

Those pumps look really cool

@viniciusnoyoutube 6 лет назад

I love this serie!

@whitebird2152 6 лет назад

Perfect ..wonderful work my friend

@lennintorrez8103 5 лет назад

Congratulations your project are amazing.

@Chaz042TFC 6 лет назад

I was thinking about making the iteration of your drink machine, kinda glad I waited.

@mackdlite5900 5 лет назад

A rare win for DIY. Nice.

@user-gx5jc1it3t 5 лет назад

its first time when diy win!!! (not watched all videos yet)

@philiphironsjr.8515 6 лет назад

Great explanations of how this works.

@tk2life 6 лет назад

Great video and explanation Keep going!

@AthanCondax 6 лет назад

Great video!

@mizrabsheikh8493 6 лет назад

Scott For Lifee

@embracethesuck1041 2 года назад

I love this style build. Very frequently I have to choose whether I should build it myself even if I know I can build it.

@stevenlee1726 5 лет назад

Thank you so much sir. Really appreciate your work and time. Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@hermin 6 лет назад

this is a good project for my aquarium!

@KnightsWithoutATable 6 лет назад

LED plant growing lamps would be a good one and topical to this time of year for many of your viewers.

@adamtan4234 6 лет назад

Another great DIY or Buy video, Scott! But I think for anyone who wants to rebuild this project for making the DIY cocktail machine themselves should use food-safe silicone tube. Afterall, you'll be drinking whatever that you'll be making

@ronroberts110 6 лет назад

I work at a municipal water treatment plant. We use peristaltic pumps to add liquid chlorine (sodium hypo-chloride) to the water flow. They are self-priming, and they are cheap to replace the pumping tube when it wears out due to cycling, every six months or so.

@yakikadafi5069 6 лет назад

Great job mr scot.

@slashabava24 6 лет назад

Scott, great job! the total time (you didn't mention in the video) you dedicated for the project is also a big factor for making decision DIY or buy .