Perrin intake 2022 WRX insane turbo sounds 2023+ VB WRX install and test review

Подписаться 15 тыс.

Просмотров 43 тыс.

50% 1

VB WRX Perrin Intake unlocks all the turbo sounds of the FA24 for the 2022 2023+ VB WRX. Full step by step install and driving test review of the new ‪@PERRINPerformance‬ cold air intake.
Perrin intake www.perrin.com/shop/air-induc...
Perrin heat shield www.perrin.com/shop/search?se...
➢SUBSCRIBE: ru-vid.com...
⚙️ TOOLS & SERVICES I CURRENTLY USE & RECOMMEND ⚙️
👉🏼 Keyword research tool for RU-vid (TubeBuddy)-www.tubebuddy.com/JDMRHD
👉🏼Music I use in my RU-vid videos (Epidemic Sound), sign up for a 30-day free trial here www.epidemicsound.com/referra...
👉🏼Logo create your brand for your business (Fiverr Pro) go.fiverr.com/visit/?bta=6633...
More JDM RHD
Follow me on Instagram / jdmrighthanddrive
Facebook / joshua.fenske.77
Amazon Storefront www.amazon.com/shop/jdmrighth...
Recommended Tools I use
Milwaukee impact wrench amzn.to/3rxgmEt
QuickJacks 5000 lift system amzn.to/3kg39yk
Metric gear wrench amzn.to/3IsnabV
Sparco Sweatshirt amzn.to/3mhxm1D
My favorite LED head light amzn.to/3q3BIaR
Mechanic tool set amzn.to/3nR8X0l
Metric Wrench set amzn.to/33WOpwj
Socket to wrench short adapter amzn.to/3fLWd6M
Vice grip set amzn.to/3FWj22a
My Camera Gear
Main Camera Sony A7IV amzn.to/3vCBdsl
Main Lens Sony 10-18 amzn.to/3HTbLBf
Low light wide angle lens Sony 11mm F1.8 amzn.to/3YrPAeA
62mm Tiffen Polarizer filter amzn.to/3sV1iB2
B Camera Sony FDRAX53 amzn.to/363tNiP
IPhone 13 pro amzn.to/3c8iNVi
GoPro Hero 11 BLK amzn.to/3HVuNZF
DJI RS3 mini Gimbal amzn.to/3l5CkO6
DJI Drone amzn.to/3lnDkLF
Manfrotto Large Tripod amzn.to/3vWXS2D
Manfrotto handle grip/mini tripod amzn.to/3hQPqtp
In car camera mount amzn.to/2Lyd7GQ
GoPro in car mount amzn.to/2TBibij
More JDM RHD 2022 WRX Content
VB WRX Noble Titanium exhaust • VB WRX titanium exhaus...
VB WRX STI wheel upgrade • VB WRX STI wheels upg...
VB WRX Blow off valve • VB WRX Blow off valve ...
VB WRX Perrin Charge Pipe • 2022 WRX charge pipe i...
VB WRX Cobb Pitch Stop install • Cobb Tuning 2022 WRX S...
VB WRX Front Speaker Upgrade • Subaru VB WRX front sp...
VB WRX Rear Speaker Upgrade • How to install new Rea...
VB WRX driving Review • 2022 WRX is the best S...
VB WRX 1st look review • 2022 Subaru WRX review...
VB WRX Volk CE28 Wheels • 2022 WRX gets new whee...
VB WRX Just bought a brand new car • How does the 2022 WRX ...
VB WRX ETS Muffler deletes • 2022 WRX Muffler delet...
VB WRX 1st oil change • 2022 WRX engine break ...
VB WRX Catback exhaust • ETS 2022 SUBARU VB WRX...
VB WRX at Dirtfish Subaru Car Show • Subaru Solterra at Big...
#perrin #2022wrx #fa24 #jdmcars #jdmlife #righthanddrive #jdmrhd #carchannel #rhd #sr20det #rb26dett #howto
BNR32 factory service manual link below
www.skyline.se/dokument/R32_gt...
All clickable links in description help to support my channel via affiliate commissions paid by sellers. Thanks for your support.

Авто/Мото

Опубликовано:

8 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@ericfromeng 11 месяцев назад

This is the first time I've seen a RU-vidr put the camera in the engine bay, really helped with communicating the sound. Awesome video dude

@JDMRightHandDrive 11 месяцев назад

Thanks man, glad the sound clips helped you out. I have the Perrin turbo inlet on the car. It makes it sound even better. That video will be coming out end of August. Thanks for watching.

@ckart 10 месяцев назад

Agreed, that was wikkid smaht.

@o0oCircleso0o Год назад

Nicely done! Thanks for explaining where the brackets go! You sold me on one. keep it up! love the channel.

@JDMRightHandDrive Год назад

Thanks Jim, appreciate the support! Enjoy ur new intake.

@free2chill727 Год назад

Awesome video, detailed w/great camera work! Thx!

@JDMRightHandDrive Год назад

You bet, so glad you liked it! Thanks for watching my channel. 👍

@Hapawerks Год назад

Love the unique angle and sound with the under hood shot! Thanks for that!

@JDMRightHandDrive Год назад

You bet man, no problem. Glad you enjoyed it and thanks for watching!

@Kush2020 Год назад

Good install video! thank you! Very informational

@JDMRightHandDrive Год назад

Hey Furyian, glad it was helpful! Thanks for watching my channel.👍

@caimano55 Год назад

Sick content as always! I love the Toretto shirt 😂

@JDMRightHandDrive Год назад

Glad to hear you enjoy the content. I was not planning on taking off my sweatshirt, but the sun came out and it was Vin Diesel time I guess. LOL Thanks for watching.

@user-is2gz2vw1o Год назад

Great video best I have ever seen thank you

@JDMRightHandDrive Год назад

Wow, thanks glad to hear you enjoy my videos. Have fun with your WRX mods and thanks for watching. 👍

@derekvela8646 Год назад

Hell yeah subscribed plan on getting a new one soon currently have the 16 wrx

@JDMRightHandDrive Год назад

Heck yeah man, thanks for the new sub. Have fun installing your new intake and thanks for watching.👍

@anthonypanganjr.9951 Год назад

Hello, thank you for placing the camera in the engine bay. It really picked up the sound. Thank for video.

@JDMRightHandDrive Год назад

No problem 👍The engine bay induction sound is pretty EPIC. Makes the car much more fun to drive just hearing the turbo.

@stevecameron9439 Год назад

yes I like the the turbo sounds!

@JDMRightHandDrive Год назад

Yeah me too! It makes the car so much more fun to drive just hearing the turbo induction noise everything you step on the throttle. Thanks for watching.👍

@haac4825 9 месяцев назад

Just Subscribed. Like the sound. Perrin top brand.

@JDMRightHandDrive 9 месяцев назад

Thanks for the new SUB! I have the Perrin Turbo inlet installed on my car. That makes the sounds 3 times better than just the intake. I have the video done, just waiting for Perrin to release the product before that video goes live on YT. Thanks for your channel support and have fun with your new VB.

@maverick8331 2 месяца назад

That underhood footage and sound is nice

@jwilliams6732 8 месяцев назад

Has anyone used the bottom mounting hole on the pipe for the bottom bracket to give the MAF wire some slack? Would that work?

@floxts9254 7 месяцев назад

Every time I tighten the hose clamp on the filter to the pipe it slides off bc the oil it’s driving me crazy

@illbert2370 4 месяца назад

Just put mine on, does yours make an annoying almost long press phone button tone when shifting?

@davidcosgrove2625 Год назад

You need to get the Perrin Charge Pipe and COBB TMIC and definitely a Tune

@musicforyourminddjjohnny Год назад

Great video I noticed you didn't install the heat shield do you really need it sorry I saw at the very end it was on backorder

@JDMRightHandDrive Год назад

Its all good, yeah I want to get that heat shield in asap. It should be coming soon according to Perrin. Heat shield install is complete now!

@WrxyDriven82 Год назад

@jdm right hand drive. I hope you pick up the turbo inlet by perrin thats coming out in 2-3 weeks. I talked to perrin to confirm that.

@user-oj6zl4ux2h 3 месяца назад

Just ordered the Perrin intake. Stoked to hear the difference. Great video, thanks for the info!

@bobbyberger18 Месяц назад

How’s your car being doing since installing that intake? Any negatives?

@user-oj6zl4ux2h Месяц назад

@@bobbyberger18 it’s been great, i had to get it tuned because my DAM was dropping. Since then I have had no issues. Highly recommend the Perrin intake.

@bobbyberger18 Месяц назад

@@user-oj6zl4ux2h how low was your DAM dropping?

@user-oj6zl4ux2h Месяц назад

@@bobbyberger18 I was getting down to .12, I ended up parking it for a few days until I could get the tune done. I’m in AZ so I also have the issue of having absolutely terrible quality gas out here.

@bobbyberger18 Месяц назад

@@user-oj6zl4ux2h oh my gosh that’s low. Thankfully nothing happened to your car.

@mikeyroca 4 месяца назад

Do you need the heatsheild

@evdboy2 3 месяца назад

Thanks for doing this video. Super helpful. Just installed this on my mother’s limited SPT 22 wrx. She loved it and the noticeable boost in performance was more than I thought it would in comparison to prior intakes on other cars I’ve experienced

@787blah 2 дня назад

Not trying to be rude but just curious. Why would you mod your mom’s car?

@evdboy2 2 дня назад

@@787blah you’re seriously going to ask that on the 4th of July? 🇺🇸 that’s why

@787blah 2 дня назад

@@evdboy2 bro what? It’s not even a American car. Miss me with that.

@evdboy2 2 дня назад

@@787blah stay mad in the RU-vid replies! Hahahaha😂🤡

@787blah 2 дня назад

@@evdboy2 stay mad? I’m not the one modding my moms car lol. Talking about America but driving your mom’s Japanese car. 👍🤡

@jesseg1758 8 месяцев назад

Any AFA20 for it?

@scottcalvert2537 Год назад

That noble exhaust sounds good in and out of the car. How are you liking it for day to day? Was a little concerned it would be too loud.

@JDMRightHandDrive Год назад

I was very concerned that it would be too loud as well. It is quieter that the ETS I had before. The ETS produced a deep exhaust not which gave more of a drone effect in the cabin. The Noble Titanium resonates making a higher frequency exhaust pitch that does not bother me so much in cabin. I am very happy with the sound after the last 1000 miles I put on it so far. Its not to loud at all, I will never use the silencer that comes with it. Thanks for watching.

@rezneba101 9 месяцев назад

WOW turbo sounds, INSANE! lmfao

@parkourcanada Год назад

I loved the video from under the hood haha

@JDMRightHandDrive Год назад

Thanks man, I was a little nervous to have my camera in there while driving. But it all worked out and the sound clip was pretty awesome. Thanks for watching.

@waybach Год назад

That’s a dope sparco hoodie

@JDMRightHandDrive Год назад

Thanks I picked it up at 425 Motorsports in Kirkland. The also are sold on Amazon. I had to have one just like the guy from Tokyo Drift. Thanks for watching!

@waybach Год назад

@@JDMRightHandDrive thanks for having me! 👊👍

@naldovaz9157 6 месяцев назад

oh yeah, Getting my exhaust and next Perrin intake, also Noble Steering wheel 2023 WRX 6 speed, No tuning as of now

@JDMRightHandDrive 6 месяцев назад

That's awesome man. I would also grab the Perrin inlet while your installing the intake. You will thank me later because the turbo noises are the coolest part of the inlet system. Have fun with your mods and Merry Christmas.

@2023startingCA 10 месяцев назад

hello, 2022 wrx 6MT can be installed a head up display?(through OBD socket) thx.

@JDMRightHandDrive 10 месяцев назад

Nice to know!

@shadowdemon7770 Год назад

Just installed mine (2023 WRX base) . This isn't my first intake, I've installed multiple over the years. So I installed everything perfectly. However I am not happy. It seems to remove power, not add. First gear always pulled hard all the way through (stock) and now it won't kick in unti aftwr 4,600 rpm. I've only had it on for a day, and I think I'm already going to return it.

@JDMRightHandDrive Год назад

Out of curiosity did you verify the MAF sensor is pointing in the proper direction? Also did you clean the excess oil off the filter to ensure the MAF sensor did not get contaminated during the initial startup? I might try spraying some maf cleaner on your sensor. That suck your having issues. Mine worked perfectly and my car is much faster.

@shadowdemon7770 Год назад

@@JDMRightHandDrive yeah but I'll double check tomorrow. It's impossible to installed it backwards. It only goes in one way. And if it was in wrong it probably wouldn't even start. But again I'm gonna double check all connections and see what happens. But you're right, holt shit that filter had a shit load of oil on it. As well as those stupid rings don't stay in place.

@JDMRightHandDrive Год назад

@@shadowdemon7770 my guess is some oils got on the sensor. Hope you get it fixed. I am going to swap my filter with a K&N filter later. Because the oil freaks me out a little.

@shadowdemon7770 Год назад

@@JDMRightHandDrive that could definitely be the issue. I'll pick up some spray and try again. Thanks for the input. Much appreciated. Hey if you know anything about upgrading my (WRX base) dual screen to a single screen, please let me know. I found a used one but I'm unsure that it would just be as easy as swap and go.

@hhaste 11 месяцев назад

That's because you did lose power. You almost always will, with an aftermarket intake on a Subaru without a tune. It's not healthy for the engine, either. Only drop in filters, like a K&N flat panel filter should be installed without a tune.

@marcholler4047 8 месяцев назад

I'm having a hard time just pulling the stock intake off the car. Loosened the clamp and removed the bolt. Thing just won't pull out. Any tips?

@JDMRightHandDrive 8 месяцев назад

There is a lower hose clamp that holds the intake to the turbo inlet. Loosen that and it should pull up and out.

@DylanVBWRX Год назад

Great content as always ! if you haven't already please get a E-Tune for the intake. We already had one blow up with an ETS intake and the ots map. Watched without sound, so if you already said you got it disregard.

@JDMRightHandDrive Год назад

Going to get it tuned very soon. I dont want my FA24 to blow up like the others running the ETS intake. The AFR ratios are reading the same on my Cobb AP3 data logs before and after the install.

@James-ql2yh Год назад

The jb4 is a e tune correct? And I wish you didn’t say in the video you don’t need a tune you do absolutely

@DylanVBWRX Год назад

@@James-ql2yh jb4 is a tuned enough to handle an intake just fine. Stock boost most intakes are safeish, but at higher boost there’s risks. The Cobb doesn’t have the ability to make adjustments without an Etune unless you have access to their software suite.

@longshanks5531 11 месяцев назад

How much does a tune cost?

@Mikey-bm1eh 7 месяцев назад

Hey so im thinking about adding a cold air intake to my 2023 wrx do you think it will void the warranty

@JDMRightHandDrive 7 месяцев назад

The AFR's are perfectly safe according to Perrin. Personally with my car if I needed to take my car into Subaru for a big warranty claim, I would just put the OEM parts back on to make sure Subaru cant say anything.

@spacedmellow5031 Год назад

Notice any difference with the intake paired with the charge pipe?

@JDMRightHandDrive Год назад

I notice mostly torque. when the turbo kick in. The intake make the bigger different in my opinion. Car is more responsive, I really want the Perrin FMIC next. I also wish another company would release a more affordable J-pipe. The ETS one is so expensive at $1300.

@joshuakern1274 Год назад

If you could only get the Perrin chargepipe or the Perrin intake which would you choose?

@JDMRightHandDrive Год назад

I would buy the intake, it is dyno proven to make 20 whp on a stock car. Best mod beside the Cobb Accessport which adds 40-50 horsepower. Thanks for watching and have fun with your VB WRX.

@bobbyberger18 2 месяца назад

What kind of tune are you running? You make any adjustments with the intake?

@JDMRightHandDrive 2 месяца назад

Perrin states no tune is required. Personally on my car I was running the Cobb AP OTS tune with the Perrin intake. I ran that tune for about 5 months until I had my car pro tuned. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TEX41FlIiBE.html

@jakehardy5997 Год назад

dude i love that turbo whistle, can you hear it while driving with windows down too?

@FeigelCreative-rb8no 11 месяцев назад

I just got mine put in. You can hear it well even with the windows up. 😂

@TheVikingRaid 10 месяцев назад

that's awesome bro. did you get a tune? @@FeigelCreative-rb8no

@FeigelCreative-rb8no 10 месяцев назад

@@TheVikingRaid For the sake of warranty, I did not. I know I could get better gains with one but it's still nice without and my dealership will still cover me if something happens. I would really like to get her on a dyno to see what just the intake and exhaust will do with no tune.

@brandonmiguel2615 2 месяца назад

I was curious if no tune on it and a the cold air intake voids any warranty’s?

@JDMRightHandDrive 2 месяца назад

Perrin says no tune is required. I ran the intake on my car for about 6 months with Cobb OTS tune without any issues before I had my car protuned.

@bayareanational Год назад

Drunk man tuning has a variety of intake tunes for the VB WRX. Should probably do that. Seems silly to upgrade parts and not the tune which is what makes the most of them.

@JDMRightHandDrive Год назад

Thanks for the heads up. Going to reach out to DM Tuning after I install the FMIC and J Pipe next week. I want to go for their E30 tune.

@longshanks5531 11 месяцев назад

How much for a tune?

@josephurnberg7381 11 месяцев назад

did you tune it for the intake?

@JDMRightHandDrive 11 месяцев назад

I did not get the tune right away, but my car is pro tuned now that all my mods are installed. The Perrin Intake AFR's show in the safe range with stock tune and Cobb OTS tunes.

@D4VYWAVEY 4 месяца назад

Did you tune it afterwards?

@JDMRightHandDrive 4 месяца назад

I ran my Perrin Intake with the Cobb OTS map. Perrin Performance did tons of dyno pulls to verify their intake system AFR values are within a safe range with factory maps and Cobb OTS maps. I did later on have my car pro tuned. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TEX41FlIiBE.html

@ia7937 10 месяцев назад

How does this affect the warranty?

@JDMRightHandDrive 10 месяцев назад

Anytime you change something on the car from OEM stock parts, Subaru could choose to not honor the manufactures warranty if something catastrophic happened with the powertrain. I would just make sure to put the stock intake and all other parts back to stock before taking car to Subaru for a warranty claim.

@frankformento345 3 месяца назад

Did the filter come oiled?

@JDMRightHandDrive 3 месяца назад

Yes the foam intake filter come pre oiled and ready for install. Have fun with your VB mods.

@infinitea6179 7 месяцев назад

does this void warranty at all?

@JDMRightHandDrive 7 месяцев назад

It potentially could. If I had any major issues with my car I would put the stock parts on before taking it to the dealership.

@spawn11 8 месяцев назад

Any gain in performance numbers too??

@JDMRightHandDrive 8 месяцев назад

Perrin dyno tested the intake at their shop and the VB picks up around 20hp on a stock tune. I installed the Perrin turbo inlet and that makes even more power and makes even more turbo sounds. That part is not released yet, but video will be coming out in the next few weeks.

@spawn11 8 месяцев назад

@@JDMRightHandDrive great waiting

@rynechristian1720 11 месяцев назад

You got a 2022 wrx right?

@JDMRightHandDrive 11 месяцев назад

Yes mine is a 2022 WRX

@Slamdrunk Год назад

Stock bov?

@JDMRightHandDrive Год назад

I am running the Turbosmart dual port BOV.

@waybach Год назад

I can never find the hole either 😂

@pyrojm1916 Год назад

bro that joke slide under the radar 😂

@law22inoc 5 месяцев назад

NO BOV?

@JDMRightHandDrive 5 месяцев назад

I installed a TS VTA BOV and it made my car run weird. I had to install the stock BOV to get my car pro tuned. I will be getting myself the new Perrin recirculation BOV. If you want extra turbo noises I would recommend getting the Perrin turbo inlet. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pPAvFHt6jc4.html

@Ninja__247 Год назад

Talked to an ASE certified Subaru tech. Non of these intakes work with stock tunes, pro tunes are mandatory.

@JDMRightHandDrive Год назад

I would agree with you and that is what I will be doing after I install the FMIC.

@matthewleach8821 Год назад

I knew an ASE mechanic who couldn't tie his own shoes, if that means anything.

@louisgonzalez6016 Год назад

No tune🤔🤔

@bryceb3796 Год назад

Seems like it would just suck in a bunch of hot air.

@DylanVBWRX Год назад

Intakes are 99% sound the stock system is fantastic with that said I have a BMS intake 😂

@bryceb3796 Год назад

@@DylanVBWRX i am going to get the BMS intake for sure. Not this silly Perrin intake that will decrease horsepower.

@pharmztko Год назад

What you think the turbo is blowing out? HOT AIR. There’s an intercooler for a reason lol. It’s for more airflow, this isn’t a N/A Honda. Also theres a heat shield for it that he didn’t install

@DylanVBWRX Год назад

@@bryceb3796 bms intake is great larger diameter piping definitely noticed a difference. None of them are major increases, but it did show improvement on the draggy. Foam filter is supposed to be better however you can always add it to the bms for 30-40

@ak2112 Год назад

trading that nice oem cold air intake for some fun sounds

@JustisFlame Год назад

Okay so I see that Perrin is confident in a no tune intake but I’m tbh scared -_-

@JDMRightHandDrive Год назад

The AFR is looking good in the data logs. The numbers are the same before and after the install. However I will be getting a tune very soon for piece of mind. I would like to have it tuned by Perrin Performance in Oregon after I get the Perrin FMIC and J-pipe.

@HI-pi1er Год назад

Always get a pro tune when installing a mod

@peeposadboy Год назад

Any change relating to airflow, you need to get a tune. Sure the car is smart enough for some variable changes, but I don’t care. Stock tune is meant to be as universal as possible. And considering how finicky and sensitive Subaru’s are to any sort of change. If you want the most out of your car’s life get a protune. E tune’s aren’t even that much. $250-$300 to save my engine, plus better performance? Yes pls. Ever since the Green Speed update dropped. A lot of tuners are now offering Open Source tunes as an option. So no need for an Access Port, just need a good quality Tactrix cable.

@terraformingcats8175 Год назад

No offense to you, love your videos. But, other than noises, this is actually more inefficient than stock. The stock ram air box does a good job of directing air. I don't understand why Perrin didn't design a box to go around that intake filter to help divert air.

@JDMRightHandDrive Год назад

I agree with you there, this does suck in hot air. I installed the heat shield about 2 weeks later and that made a noticeable difference you can feel. Did you see the @Subispeed intake shoot out video? The reviewed the Perrin, AEM and ETS intakes. Pretty good review to see all the dyno comparisons. Thanks for the channel support.

@terraformingcats8175 Год назад

@@JDMRightHandDrive I did just follow up by watching your front mount install and see you added the air box shroud. Good work!

@WrxyDriven82 Год назад

For us California guys, we gotta switch out filters to k&n to be road carb legal.

@JDMRightHandDrive Год назад

That's got to be a little frustrating. At least you guys have some good drop on filter options now.

@WrxyDriven82 Год назад

@@JDMRightHandDrive yeah it is but you gotta pay to play.

@grimizzi715 Год назад

Life’s a risk carnal.

@WrxyDriven82 Год назад

@@grimizzi715 True... but this is California...gotta stay inline to save some sort of costs from the po..po..

@ronkrill2038 4 месяца назад

grimmspeed filter is what you want..more power

@Anonymoose0913 Год назад

Man it just doesn’t sound as good as the EJ257 :/

@peeposadboy Год назад

Lol I don’t care what any manufacturer says. These Subaru’s are some of the most finicky and sensitive to change engines I’ve ever messed with. When changing anything relating to airflow and/or pre 02 sensor, get a tune. Even a 100% stock WRX will highly benefit from a protune/etune over stock. The stock tune is tuned to work in various altitudes, air humidity, air temperature, differing octane levels and etc. it’s meant to work as safe as it can universally. Get the car tuned for your area and needs. Car will feel 1000% different and you won’t regret it. E Tunes for 2022 WRX’s are cheap since a lot of tuners are wanting to get their hands on more 2022 WRX’s. I mean you have a Cobb AP, why wouldn’t you get an etune or a protune if you have a reputable Subaru tuner locally? I’ll never understand people who pay $700 for an Accessport and run the stock tune or worse an OTS tune.