Pin Nailer Won't Fire - Fixed! 

Dude, thank you! I had a tiny tiny piece of metal in the plunger. Great to be able to fix something with only an Allen wrench and a needle nose. Very helpful to watch someone take things apart ahead of time.

Grabbed mine out of the trash, took it apart, made sure it was clear, reassembled and now it works. Thanks.

I have just fixed my nail gun that misfired thanks to this video. Turns out that a a piece of a broken nail was jamming up the gun. Big thanks !

Thanks. Took mine apart, cleaned and relubed. Works great!

Great video. I borrowed my sister-in-law’s nailer and quickly jammed it up. The manual tells you to remove the front plate but says nothing about looking in the cylinder. Works great now. The only thing that I would add is to watch for the little black spring. I didn’t see it fly out when I opened up the top. Luckily I didn’t lose it.

Thanks for that! It was easier to disassemble than I feared. Mine was gummed up with oil that had solidified like hard beeswax.... now like new!

Took mine apart. Put it back together and it chooches just fine now. Thanks!

fixed my cheap Menards gun in 15 minutes after watching. Thx !

Very helpful. Thanks for posting. 👍

Great video.. All most thru my nailer in the trash.. My plunger was stuck.. Now works like a charm...

Great fix.

Nice vid, helped me know what to expect, now i'm goin in my fairly new Central pneumatic nailer too.

Awesome video, thank you. My Porter Cable pin nailer is not up to the job, now I got an idea how to git er done. Thanks again for a no BS video, great job!

Appreciate the video. Such a simple fix! Was worried I'd have to buy a new gun lol

Nice job👍👍👍👍

I like your style!

Thank you for for taking your time to make this video! It was GREATLY Appreciated! Problem Solved!

Awesome, excellent video. My pin nailer has been fixed!

Excellent

Great video - thanks for posting

Great video, thanks!

Thank you for the lesson you just got me out of a tight spot

I have a brand new numax..never fired from first time trying. I'll try your process. Hope it helps. Thanks. Good vid for newbies.

Nice job!!! Thank you!!

Thx. You gave me the motivation to take the cylinder head off and clean out some gunk and maybe a couple bug larvae that were near the top. No idea exactly what the problem was but it's working now.

Thank you, this video helped me!

Great. Mine stopped working just after I hit more than one nail in fast succession but did not look at the time and finished the job with regular hamer and nails. Will look tonight as I'll need the thing again.

Thanks for video

Thank you boss 🙏

Thank you.

thanks man for camera and repair

Thanks really helpful, gives me the confidence to open mine up, to look for the problem

Very helpful ! This for sharing

Thank you so much , it was a bent nail. works great !

I'm a stapler from Harbor Freights and the plunger always gets jammed I always need to get a little hammer and Tinker it down to go back in so yes again thanks for the video

Thanks

thanks sir

Great video, I'm back in businesss!

awesome thanks , need to try to fix mine

Thank you!!

Thanks brother. Saved me on a job site. 😍

Thank you

Thanks !

Thanks man - I also fixed mine

I just bought one hun!

Hi, I have an Airmaster pneumatic hammer for nails and staples that no longer knocks. Air comes out when the button is pressed, but it doesn't beat anymore. SUGGESTIONS?

Do u think this is typical with most air nail guns 16/ 18 gauge?

I have the same problem. Do you think I can try to take all apart with my Dewalt brad nailer?

Help! I have a new brad gun, worked for a day, now pressuring it up to even 140, it starts hissing air out of the relief on the very back of the cylinder (facing you is you hold it straight out like a gun.) That end has a plastic cap and it can be turned 360 to change the direction of the venting air. It will not stop leaking, and at anything up to 140, it simply will not "fire". Some difficult folks think it is junk and wanna tear it to pieces, I just think it might be something more simple. It likely was a harbor freight.

Fixed my HUSKY nail gun by following the video. Thank you!

Mine works but the problem is when I shoot once n go to shoot again it won't work unless I disconnect the air hose n plug it back again then it shoots n repeat to go shoot again

2:39 ……let see if she chooches😂😂😂😂

Skookum!

My one blows air from the back

What is "chooches"? Lol... you said "lets pull the nail out, put it back together and see if it chooches"???

Thanks