Тёмный
No video :(

Plumbing Part 1 - Poor Man’s Food Truck 

Poor Man's Food Truck
Подписаться 4,4 тыс.
Просмотров 32 тыс.
50% 1

3 Compartment Sink:
www.amazon.com...
Hand Sink:
www.amazon.com...
Water Pump:
www.amazon.com...
Pex Crimp Tool:
www.amazon.com...
Pex Cut Tool:
www.harborfrei...
Wash, Rinse, Sanitize Labels:
www.amazon.com...
Flange Feet:
www.amazon.com...
Pex Fittings:
www.amazon.com...
20 Gal Water Tank:
www.classacust...
25 Gal Water Tank:
www.classacust...
Water Tank Installation Kit:
www.classacust...
Backwater Valve:
www.homedepot....
Plumbers Putty:
www.homedepot....
Oatey PVC Cement:
www.homedepot....
Flange Feet
www.amazon.com...

Опубликовано:

 

25 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 139   
@lenspin14
@lenspin14 6 месяцев назад
Excellent! You and Frank B are priceless for new food truckers!
@Robroy333
@Robroy333 Год назад
Great tip! I bought those tanks directly and saved $50 each as well and got free shipping and got them in 3 days! Thanks!
@poormansfoodtruck
@poormansfoodtruck Год назад
Awesome! Glad I could help!
@yamiguarm8577
@yamiguarm8577 2 месяца назад
what an informative video! I will definitely be following it to do my plumbing next week. I have a question though; how do you vent the gray water tank? you should do a video on how you clean the tanks when they need sanitation. This follower will truly appreciate it!!
@jerryjenkins322
@jerryjenkins322 Год назад
The plug by the sink will have to be a gfci period
@JosephLynnPhotographySalem
@JosephLynnPhotographySalem Год назад
Thanks for the video! Just moved to Florida myself and we're going to open a shaved ice business.
@poormansfoodtruck
@poormansfoodtruck Год назад
That’s awesome welcome to FL! Wishing you the best of luck! Shaved ice should do well in Florida 🙏🏻
@luiszazueta103
@luiszazueta103 4 месяца назад
​@@poormansfoodtruck hi do you know if the water tanks can be mounted on top of eachother
@kevingotchal1992
@kevingotchal1992 9 месяцев назад
I appreciate your video...Did you have any problems with the water from the hand washing sink draining into you grey water tank? The fitting you used is a "Santee" and should only be used vertically in the wall for a sink drain. I'm about to start my version of what you did and I really do appreciate the vids! Thank you
@LuisAlvarez-zp7et
@LuisAlvarez-zp7et Месяц назад
Thank you my friend for the video. Can you tell me if the 20/25 water tanks are ok ?
@wilsonmaingrette715
@wilsonmaingrette715 Год назад
Y did u apply the pvc cement on the inside of the pipe? It actually should go on the outside of the male pipe
@poormansfoodtruck
@poormansfoodtruck Год назад
Almost got away with that one lol! Complete mistake on my part, was focusing on shooting the video vs. concentrating on the job at hand. Good call out though
@elidameza8241
@elidameza8241 Год назад
Great work
@dlking1320
@dlking1320 Год назад
I think you're supposed to put the glue on the outside of the pipe but on the inside of the fitting 9:00 min in
@poormansfoodtruck
@poormansfoodtruck Год назад
Great catch! I was too busy filming rather that concentrating on what I was doing! But yes you’re absolutely correct
@matthewlang8555
@matthewlang8555 9 месяцев назад
100%
@340neptune
@340neptune Месяц назад
What are the black pieces connected to the sink drain?
@homelesshomesteader
@homelesshomesteader 2 месяца назад
Better check with your state before you start anything. In my state a master plumber has to draw up the plans, send them in for approval ( in triplicate!) and the master plumber has to do all the work. Then the state plumbing inspector has to pass it.
@jonahblack5942
@jonahblack5942 Месяц назад
That stinks
@bernieayala9969
@bernieayala9969 Год назад
Hello, what drying rack did you use, we are also in Florida God bless in your success.
@poormansfoodtruck
@poormansfoodtruck Год назад
Great question! I have mounted 2 wire drying racks directly above my 3 compartment sink. I will be posting an updated video soon with all other final touches (including the drying racks)
@jeffbecraft7174
@jeffbecraft7174 9 месяцев назад
Just put a weather proof cover on outlet
@robertsweeten8840
@robertsweeten8840 Год назад
what was the white PVC piping under the sink size ?
@poormansfoodtruck
@poormansfoodtruck Год назад
Great question! Mine is all 1-1/2 PVC piping
@Stella2U
@Stella2U 3 месяца назад
Thank you, thank you, thank you!
@robertsweeten8840
@robertsweeten8840 Год назад
do you remember how many feet you ended up using and once again thank-you , you have helped me considerably...
@poormansfoodtruck
@poormansfoodtruck Год назад
Do you mean how many feet of PVC pipe?
@robertsweeten8840
@robertsweeten8840 Год назад
@@poormansfoodtruck yes
@poormansfoodtruck
@poormansfoodtruck Год назад
Only had to use one 10’ length and I actually had some left over!
@lou5521
@lou5521 Год назад
Did you have to switch the plumbing piping on the hand sink that elbow is flowing in to the 3 compartment sink drain
@poormansfoodtruck
@poormansfoodtruck Год назад
Im not sure if I follow?
@jerrywilliams6820
@jerrywilliams6820 9 месяцев назад
Yes I noticed that too your tee is backwards so when you run the hand sink it’s draining back into the 3 compartment sink and there’s no trap under the hand sink so I’m also confused of these things as well? Thank you for the video I really appreciate all the info though.
@benstoth
@benstoth 9 месяцев назад
The 3 compartment sink is crazy small, do you have any issues fitting commercial cooking pots, pans, dishes, etc into those tiny 12”x12”? Vats?
@poormansfoodtruck
@poormansfoodtruck 8 месяцев назад
For our menu we really don’t need too many large pots/pans as a lot will be done on the flat top. Most of our cleaning will be the food warmer containers and fridge containers. We’ve had a few practice runs and had no issues yet!
@Vitaminarie
@Vitaminarie Год назад
Also can you tell us why you cut the tailpipe? For space? How much did you cut? What did you use to cut the tailpipe?
@poormansfoodtruck
@poormansfoodtruck Год назад
I used just a oscillating tool, and it needs to be cut to ensure that you have a downward flow for the drainage
@crucialcuts
@crucialcuts 8 месяцев назад
Love your videos, but also love trying new foods… are you in central Florida … if so where? Would love to try out your tacos!!!!
@poormansfoodtruck
@poormansfoodtruck 8 месяцев назад
Thank you so much! We would love for you to come try us out! We are in central FL (specifically Polk County) between Lakeland and Winter Haven
@robertsweeten8840
@robertsweeten8840 Год назад
your blue and red water hoses were they 1/2 ? don't see size in any of the cements
@poormansfoodtruck
@poormansfoodtruck Год назад
Yes they are all 1/2”
@amentanorman855
@amentanorman855 2 месяца назад
I have a food truck I want to upgrade my plumbing system can you point me in the correct position please
@robertsweeten8840
@robertsweeten8840 Год назад
how did you start the gluing process on your floor . franks video was no help. i'm going to tuck my edges up behind the stainless
@poormansfoodtruck
@poormansfoodtruck Год назад
For me personally, I found it fairly easy with the walls in place first. I lay the floor down, and cut the front half first and worked slowly towards the rear of the trailer. Great thing about this floor is it’s super flexible and relatively easy to install
@Vitaminarie
@Vitaminarie Год назад
How much did you cut the 6in tailpipe? Every video we’ve watched doesn’t mention how much is needed to cut off of the tailpipe.
@poormansfoodtruck
@poormansfoodtruck Год назад
Each will be different depending on the height of your 3 compartment sink. Just be sure that you have a decline from left-to-right to ensure proper flow
@uncledavesfrontier6846
@uncledavesfrontier6846 Год назад
Will that pump work being mounted above the tank? I have that pump and mine has to be mounted on the floor or it doesnt work. Apparently mine has to be at the lowest point of the water in the tank.
@poormansfoodtruck
@poormansfoodtruck Год назад
Yes sir this pump will work even when elevated above the fresh water tank. I believe it’ll pump a maximum of 3.3 gallons per minute
@samnamnayuhsanikhon-samoox5745
No sweep 90 on the first 3 compartment drain and no P-trap required?
@poormansfoodtruck
@poormansfoodtruck Год назад
For my HD they are not required. Check with your local DPBR before installing!
@acostaedwin986
@acostaedwin986 10 месяцев назад
Could you give me information where you bought your kitchen equipment including the extractor hood?
@poormansfoodtruck
@poormansfoodtruck 10 месяцев назад
For sure! My equipment was purchased through Webstaraunt.com and my hood was purchased though Vevor.com
@acostaedwin986
@acostaedwin986 10 месяцев назад
thanks for your help
@fernandovargas3620
@fernandovargas3620 Год назад
Did you purchase 2 of the water tank installation kit or just one?
@poormansfoodtruck
@poormansfoodtruck Год назад
Great question - I only needed to purchase one installation kit
@michaelbarnhardt6031
@michaelbarnhardt6031 Год назад
how much room do you have from the edge of the door to the front of the trailer ? where your hot water tank is mounted . thanks
@poormansfoodtruck
@poormansfoodtruck Год назад
Great question! I have right around 20” of space if I’m not mistaken. It’s fairly tight but with the equipment I’ve chosen it works 👍🏻
@ThePena80
@ThePena80 Год назад
what size is your trailer. tanks
@poormansfoodtruck
@poormansfoodtruck Год назад
Ours is a 7’x16’ made by Carry On Cargo
@harrypatterson8797
@harrypatterson8797 Год назад
How hot does your water get? The water pump is rated at 3.3 GPM and the heater is 1.6gpm I can’t get the water hotter than 110F.😢
@poormansfoodtruck
@poormansfoodtruck Год назад
I am yet to run the hot water in my system (waiting for plumbing inspection) will keep you posted as soon as I do!
@aone131916
@aone131916 Год назад
What size is the pvc pipe and what size is the backflow valve. Example 1 1/2 inch or 2 inch
@poormansfoodtruck
@poormansfoodtruck Год назад
Everything in my setup is 1 1/2 inch (including back flow valve) hope this helps!
@tinyquailfarm4371
@tinyquailfarm4371 11 месяцев назад
Im in ocala florida, just wondering if i can use formica kitchen countertop in a food trailer to make a 4 compartment sink. Thanks
@poormansfoodtruck
@poormansfoodtruck 11 месяцев назад
Great question - to be honest I’m not sure. I have seen many trucks/trailers in my area that have those countertops. However, personally, I’m not keen on how they look. Even though the stainless steel is more expensive, it certainly gives a more professional and commercial quality to the trailer. But definitely reach out to your local DPBR to confirm!
@tinyquailfarm4371
@tinyquailfarm4371 11 месяцев назад
@@poormansfoodtruck yes thank you, i reached out to them yesterday and it is allowed. I decided to go with stainless steel instead tho. I does look a lot better. Thanks
@tinyquailfarm4371
@tinyquailfarm4371 11 месяцев назад
Is there any regulation in Florida in regards to water heater plumbing? I cant really find anything. I emailed the inspector but she said they have no info on that. Pex is out of my budget, i was thinking of using 1/2 pvc. Any recommendations?
@Robroy333
@Robroy333 Год назад
How did you attach the flange feet? My sink is similar but has a thread at bottom. Also how did you drill your sink for the wall brackets ? Seems not matter what but I use it’s taking forever
@poormansfoodtruck
@poormansfoodtruck Год назад
I attached them using stainless metal strapping kit (works quite well!). Keep at it brother you got this!
@GabrielStarr-kt9ep
@GabrielStarr-kt9ep 2 месяца назад
@@poormansfoodtruck Do you remember what kit you used? And is that foil tape around it? Thanks! Glad to see you up and running!
@thelotspot
@thelotspot Год назад
What material did you use to cover the wall behind the sink ?
@poormansfoodtruck
@poormansfoodtruck Год назад
I chose to use white aluminum behind the sink also
@lou5521
@lou5521 Год назад
I see some others already said it just make the outlet a gfci and your good
@poormansfoodtruck
@poormansfoodtruck Год назад
🙏🏻
@reesebasile1305
@reesebasile1305 2 года назад
Great video! Can you please link the backflow preventer valve from Home Depot? Thank you!!!
@poormansfoodtruck
@poormansfoodtruck 2 года назад
Thank you so much for the support! 🙌🏻 Absolutely - Just updated the description!
@rubyvlogs3640
@rubyvlogs3640 Год назад
Do you know how to trouble shoot the pump where I accidentally let the clean water go too low that now I filled it and the water won’t come out the sink, but the water pump is in
@rubyvlogs3640
@rubyvlogs3640 Год назад
On*
@poormansfoodtruck
@poormansfoodtruck Год назад
Sounds like you mate have a bad pump? Whenever there’s no water flow, the pump should cut-out automatically and then restart once the water is available again?
@robertsweeten8840
@robertsweeten8840 Год назад
copper crimp rings , how many did you go through
@poormansfoodtruck
@poormansfoodtruck Год назад
Great question! I went through about 1 and a half bags
@LOVELYFE-xj5mt
@LOVELYFE-xj5mt Год назад
Do you need a grey water tank if you are using a grease trap?
@poormansfoodtruck
@poormansfoodtruck Год назад
Great question! That will depend on your local health dept and what they are required to check during inspection. What state are you located?
@hustlemann3072
@hustlemann3072 Год назад
Do you not have to have a fire suppression system?
@poormansfoodtruck
@poormansfoodtruck Год назад
Yes - fire suppression system coming soon!
@karlabechtel4169
@karlabechtel4169 Год назад
I only have 3 sinks, to be up to code do I have to install another sink,, I have a picture. Located in Texas
@poormansfoodtruck
@poormansfoodtruck Год назад
It’ll depend on your county specifically, some will allow you to use one of the compartments as the “hand wash” station also. However to my knowledge this is fairly uncommon!
@poormansfoodtruck
@poormansfoodtruck Год назад
Feel free to send me the pic via Instagram and I’ll be happy to help!
@j8ke937
@j8ke937 10 месяцев назад
Just install a GFCI in that outlet.
@larrypayne8440
@larrypayne8440 2 года назад
Is the grill bar, r they considered grease filters
@poormansfoodtruck
@poormansfoodtruck 2 года назад
Yes - they do the same thing as the shutter-style (grease gets trapped and travels down the bars into the grease pans below). But honestly I’m thinking about changing mine out to the shutter-style later down the line
@robertsweeten8840
@robertsweeten8840 Год назад
when you ordered your tanks did you only need 1 kit or 2 as there sold separately?
@poormansfoodtruck
@poormansfoodtruck Год назад
Only needed the 1 kit to use for both tanks
@robertsweeten8840
@robertsweeten8840 Год назад
Thank-you for info ,I ordered my tanks and kit directly from class A and saved 73.00 verses Amazon 👌
@poormansfoodtruck
@poormansfoodtruck Год назад
Awesome!! Glad I could help save a few bucks! It’s all adds up
@mviking36
@mviking36 Год назад
Did you ever figure out how to secure the front legs of the feet to the flange feet?
@mviking36
@mviking36 Год назад
And also which flange feet did you buy?
@poormansfoodtruck
@poormansfoodtruck Год назад
Flange feet I have linked in one of the videos (if not I will re-link). For now I am using a large aluminum strap (kinda looks like an exhaust repair strap) that I found at my local auto parts store. Hope this helps!
@mviking36
@mviking36 Год назад
@@poormansfoodtruck thanks bro!
@latoyajohnson518
@latoyajohnson518 Год назад
Is there anyway you can share the blue print for this setup??
@poormansfoodtruck
@poormansfoodtruck Год назад
I’ll see what I can do! Shoot me a DM via the IG page
@thelotspot
@thelotspot Год назад
What are the flange feet link is not working
@poormansfoodtruck
@poormansfoodtruck Год назад
Thank you for letting me know! I will update this asap!
@kipzenleon8264
@kipzenleon8264 Год назад
You have to put a GFCI when is close to the water brother … anyway I can mess you I have a few questions making a food truck my self
@poormansfoodtruck
@poormansfoodtruck Год назад
You got it man! Appreciate the feedback! And absolutely message me any time!
@mackenziemills5040
@mackenziemills5040 Год назад
The flanged feet link won’t work. What feet are those?
@poormansfoodtruck
@poormansfoodtruck Год назад
Sorry about that! Will try to update description!
@rhondasmith2125
@rhondasmith2125 10 месяцев назад
Still doesn’t work
@poormansfoodtruck
@poormansfoodtruck 10 месяцев назад
@rhondasmith2125 just re-uploaded hopefully it’ll work now
@robertsweeten8840
@robertsweeten8840 Год назад
Can you tell me what size 90 degree 1 1/2 pvc
@robertsweeten8840
@robertsweeten8840 Год назад
how tall are your front legs on your 3 compartment sink ?
@whodat224able
@whodat224able Год назад
What part of Florida?
@poormansfoodtruck
@poormansfoodtruck Год назад
Polk County
@whodat224able
@whodat224able Год назад
@@poormansfoodtruck I’m in duval county. I’m starting a truck as well and it’s hard getting questions answered on most things. I hate to ask but I have a few questions when ever you are available. Thanks bro
@poormansfoodtruck
@poormansfoodtruck Год назад
For sure man! Shoot me a DM via the Instagram page I’ll be happy to help!
@user-nt1cb3ml4f
@user-nt1cb3ml4f 9 месяцев назад
It looks to me like you have plenty of room for a sink with at least one drain board and a hand wash sink…
@poormansfoodtruck
@poormansfoodtruck 8 месяцев назад
Once we installed our fire-suppression to the left of our sink, there is very little space on the other side unfortunately
@jazgeo1957
@jazgeo1957 Год назад
What size is your trailer?
@poormansfoodtruck
@poormansfoodtruck Год назад
My trailer is a 7x16ft made by Carry On Trailer
@jazgeo1957
@jazgeo1957 Год назад
@@poormansfoodtruck thank you for replying.
@poormansfoodtruck
@poormansfoodtruck Год назад
Anytime my friend!
@robertsweeten8840
@robertsweeten8840 Год назад
i wish i could save money on my hood system as i need a 9ft hood
@poormansfoodtruck
@poormansfoodtruck Год назад
Damn yeah a hood that size will definitely run you a pretty penny! They may have them on vevor.com?
@robertsweeten8840
@robertsweeten8840 Год назад
@@poormansfoodtruck hood mart is 2,850 for hood and fan with free shipping if I use my Amazon prime visa card
@poormansfoodtruck
@poormansfoodtruck Год назад
Yikes! That’s a lot of dough! But I do know that their hood systems are really good and their customer service is excellent as well.
@luiszazueta103
@luiszazueta103 4 месяца назад
​@@poormansfoodtruck wat sink did you get
@brogantipping2101
@brogantipping2101 Год назад
$400 are you insane 😳
@poormansfoodtruck
@poormansfoodtruck Год назад
Possibly! Best price that I could find for the dimensions that I needed though!
@brogantipping2101
@brogantipping2101 Год назад
Can get brand new for £200 another question your accent are you English originally?
@brogantipping2101
@brogantipping2101 Год назад
Steer clear from Amazon or any middleman company
@brogantipping2101
@brogantipping2101 Год назад
Put an outdoor socket next to water matey
@poormansfoodtruck
@poormansfoodtruck Год назад
Difference between US vs UK unfortunately. This is by far the best prices I could find, UK must be doing better than over here lol!
@logankdavis27
@logankdavis27 Год назад
how did you fasten your tanks to the trailer?
@poormansfoodtruck
@poormansfoodtruck Год назад
I used several “L” brackets around the tanks themselves to secure them into place
@tranqulitylifestyle1119
@tranqulitylifestyle1119 Год назад
Love your video's using them to restart building my food truck! it is much smaller only about 8ft is that the standard sink that the dbpr requires can I email you and send you the sinks i have i have three they are just much smaller im located in Florida as well
@poormansfoodtruck
@poormansfoodtruck Год назад
That’s awesome congrats on starting your journey! Yes of course you’re more than welcome! Shoot me an email: poormansfoodtruck@gmail.com
Далее
Plumbing Part 2 - Poor Man’s Food Truck
14:10
Просмотров 10 тыс.
Cooking Equipment - Poor Man’s Food Truck
23:50
Просмотров 41 тыс.
How to Build your Food Truck:PEX Plumbing
25:54
Просмотров 36 тыс.
Cargo Trailer Camper Conversion - Fresh Water System
5:22
How to build your Food Truck Water System
35:32
Просмотров 40 тыс.
Poor Man’s Food Truck - Final Inspection
13:18
Просмотров 2,2 тыс.
Food Truck Plumbing: Part 1
15:57
Просмотров 19 тыс.
Fire Suppression System - Poor Man’s Food Truck
10:01