Тёмный

Print Giant Things on the Creality CR-10! (3D Printer Unboxing & Review) 

Mighty Jabba's Collection
Подписаться 32 тыс.
Просмотров 227 тыс.
50% 1
ВидеоПоделитьсяСкачатьДобавить в

This is a review of the Creality CR-10 large format 3D printer. Some GearBest affiliate links and coupon codes to get a discount on this printer and other CR-10 models can be found below. Also check out the CR-10 Facebook page, and the video from Tiny Machines that describes how to put the machine together. Finally, I also link the models that I printed for this video.
GEARBEST PRINTER LINKS:
*CR-10*
CR-10 US PLUG BLUE: bit.ly/CR10USBLUE
CR-10 EU PLUG BLUE: bit.ly/CR10EUBLUE
CR-10 US PLUG ORANGE: bit.ly/CR10USORANGE
CR-10 EU PLUG ORANGE: bit.ly/CR10EUORANGE
_________________________________________________
*CR-10S / Upgraded CR-10*
CR-10S BLUE US PLUG: bit.ly/CR10SUS
CR-10S ORANGE US PLUG: bit.ly/2OJUC2P
CR-10S BLUE EU PLUG: bit.ly/CR10SEU
CR-10S ORANGE EU PLUG: bit.ly/2GpHHz9
_________________________________________________
*CR-10 S4 /Enlarged CR-10*
CR-10 S4 US Version: bit.ly/CR10S4US
CR-10 S4 EU Version: bit.ly/CR10S4EU
_________________________________________________
*CR-10 S5*
CR-10 S5 US Version: bit.ly/CR10S5US
CR-10 S5 EU Version: bit.ly/CR10S5
_________________________________________________
*CR-10 Mini*
CR-10 Mini US Version: bit.ly/2nUha7u
CR-10 Mini EU Version: bit.ly/2nUBIgd
_________________________________________________
*CR - X*
CR-X US Version: bit.ly/crealitycrx
CR-X EU Version: bit.ly/crealitycrx-eu
_________________________________________________
*LD-001 DLP Resin Printer*
Creality LD-001 US Version: bit.ly/creality_ld-001
Creality LD-001 EU Version: bit.ly/creality_ld-001-eu
_________________________________________________
Other links:
CR-10 Facebook Page:
/ crealitycr10
CR-10 Assembly Video by Tiny Machines:
• Creality CR-10 Assembl...
_________________________________________________
Thingiverse Models:
Fillenium Malcon: www.thingiverse.com/thing:919475
Bender Bust (original, non-bank version): www.thingiverse.com/thing:182789
Low Poly C-3po and R2-D2: www.thingiverse.com/thing:196...
Luke Skywalker Bust: www.thingiverse.com/thing:229...
Jabba the Hutt Idol: www.thingiverse.com/thing:144...
Bed leveling wheels: www.thingiverse.com/thing:240...
Heat bed cable strain relief bracket: www.thingiverse.com/thing:218...

Развлечения

Опубликовано:

 

14 авг 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 249   
@weldmachine
@weldmachine 6 лет назад
I sit here with my 7 year old son watching this video, to get him interested in 3D printing maybe to soon but the information you give is very good and happy to learn something new. I run a small CNC machine shop and 3D printing might be a good place for my son to start not that i have any wish for him to take over where i finished but it helps him to broaden his mind.
@VegasDannyReturns
@VegasDannyReturns 6 лет назад
It's really incredible how quickly this tech is moving....that bust of Luke is so impressive!
@CD-SU
@CD-SU 6 лет назад
Impressed with the overall video - style and content easy going, informative. Keep it up.
@TK1209
@TK1209 3 года назад
I really enjoy watching your videos while my R2 is slowly printing on my Ender 3 Pro. Thanks for sharing!
@reinmannol
@reinmannol 6 лет назад
Excellent Video! Very Focused and Informative.
@jarvom6289
@jarvom6289 6 лет назад
Great video, the CR-10 looks top notch and those prints came out wonderfully! The CR-10 looks great, wish I had the space for one though even if I did I wouldn't have the space to hold everything I made with it.
@wa2ukp
@wa2ukp 6 лет назад
After seeing your video I pulled the trigger and placed an order with GearBest. Been dragging my heals but I couldn't beat the deal from them.. THANKS..
@Proto_009
@Proto_009 6 лет назад
I just received my CR-10 about 2 days ago and this was a great source of information for me! thank you so much!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+Evan Deaton Glad to hear it!
@NolanCreate
@NolanCreate 6 лет назад
Good first look and uses of the CR10, even though I am building my large format I have considered this one and may still need to. Must say I couldn't keep my eyes off your shelf on the left! Now I'm off to watch that vid.
@michelefancy8110
@michelefancy8110 6 лет назад
Thank you for the coupon code! The CR-10 will be my first printer so it saved some money to get some filament.
@garysickler2179
@garysickler2179 6 лет назад
It took me awhile to get the hang of printing with abs. The corners would curl up every time.I started using a slurry of abs dissolved in acetone and painted a thin layer on the glass. every print has been perfect since. Love this printer .
@LarryLeeMoniz
@LarryLeeMoniz 6 лет назад
That is amazing looking! Great job!
@jghanson25
@jghanson25 6 лет назад
Just ordered my CR-10s from amazon. It is in fact my first printer but I am a tinkerer and find joy in optimizing the function of things by my own means. That being said, I’ll still need help and guidance, but I am very excited. Thanks for the video!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Congrats & good luck. I think as long as you have the right mindset (and it sounds like you do) the CR-10 is a fine first printer.
@mcsdaver
@mcsdaver 6 лет назад
I got my CR 10 and it is by far the best 3d printer I have ever had. I am 3d printing my R2 D2 parts for my full scale R2 D2 robot!
@mywonderfultoys
@mywonderfultoys 6 лет назад
David Mc can it handle alot of printing without problems?
@usynnstradler
@usynnstradler 6 лет назад
David Mc you're wasting your time
@usynnstradler
@usynnstradler 6 лет назад
I like to print 3d floor plans of houses. We all have our vices I suppose
@Nephalen
@Nephalen 6 лет назад
That's awesome! Post the finished results!
@oakstar519
@oakstar519 6 лет назад
Yes. Nerdiness is the best.
@MZONE3D
@MZONE3D 6 лет назад
Hi. I took the glass that came with the cr-10 and scuffed it up with some 320 grit sandpaper. It sticks to that without any issues.
@toonman361
@toonman361 6 лет назад
Great video. I am thinking of buying the CR-10S in the spring. I think the increase in price is worth it for such a respected printer.
@timmc6009
@timmc6009 6 лет назад
Too funny. I've been thinking about getting this printer for the last couple months. Every youtuber I watch seems to really like it. Been pricing it at gearbest and banggood and the best price was $396 at banggood but it was a preorder so it wouldn't ship for a couple weeks. Now your review REALLY makes me want to buy one lol.
@nerys71
@nerys71 6 лет назад
$530 on amazon. you will have it in 2 days.
@Dredger25
@Dredger25 6 лет назад
I got my CR-10 yesterday and have been printing like crazy. Your video convinced me to take a shot at the CR-10 as my first printer and I'm not disappointed (other than my edits to the heat bed cable mod that turned out functional but ugly). Currently printing a 6 inch Bobba Fett found on thingiverse.com, my first long print (12 hours). The CR-10 is awesome! it assembled so easy and printed gcode, or dicapacat, flawlessly. I have printed the bed warmer strain relief and the filament holder with great results. After Bobba I am going to try the fillenium Malcolm as a birthday present for my star wars loving kid! Thanks for convincing me that the CR-10 is the printer I needed (and desperately wanted)!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
That's good to hear! I still think the CR-10 and its variants are probably the best value out there.
@scottm5425
@scottm5425 3 года назад
The Falcon looks fantastic, time to start saving my penny's
@SammyWatsit
@SammyWatsit 6 лет назад
damn this video was awesome, I loved seeing all of your 3D printed models on the shelves and I cant wait for more videos of you printing stuff. Also do you plan to paint the millennium falcon? cause id love to see that!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I probably won't paint the falcon because I already have some realistically painted falcon models (including the studio scale model from Master Replicas). So I'd rather keep it as an example of a huge 3D print.
@LondonMus
@LondonMus 5 лет назад
Thank you for sharing. Wanted to ask if the CR10 resumes printing if you run out of filament? Also if it has the option to resume print if the power cuts off? Many thanks and amazing prints with your CR10👍🏼
@eugenerusselnash
@eugenerusselnash 3 года назад
Wow! That Falcon despite not being accurate is still amazing! That Mark Hamill Bust is Great! Is I want a Printer! Best
@codingforslowpeople6721
@codingforslowpeople6721 6 лет назад
Thank you for the video, you the best. Very very very great tutorial A+A+A+A+A+. You all the great possibilities of this printer.
@ThatDamnFosterKid
@ThatDamnFosterKid 6 лет назад
I saw this video last night and it was the final nail in the coffin. I just clicked the order button. I've got a Prusa i3 X from Geeetech that I've had all sorts of issues with (bent rods, warped beds). I've seen many makers showcasing the CR-10 and figured it will make a fine addition to my tool collection!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I hope it works out well for you!
@ThatDamnFosterKid
@ThatDamnFosterKid 6 лет назад
Well, I got my CR-10 about a month after I posted my original comment. Since then, I've been printing like crazy with it! I've got a few time lapse videos that I still need to edit and post to my channel!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Jonathan Foster Good to hear it’s working out for you!
@ThatDamnFosterKid
@ThatDamnFosterKid 6 лет назад
Mighty Jabba's Collection Thanks! We may spring for one of the larger models soon, too, to recreate larger pieces of armor for some of our cosplay friends too.
@Theexplorographer
@Theexplorographer 6 лет назад
Little tip that will change your life. Take the springs of the bed. Get spacers and make the bed non-adjustable. Your prints will thank you for it.
@Twin_Flyer
@Twin_Flyer 3 года назад
Impressive prints!! Just picked up a used CR-10, and after many MANY hours or working out the bugs, finally have a print that actually stuck to the build plate! I know this is an older video, but any idea what your setting for those prints were? That bust was really amazing!
@jackmayers141
@jackmayers141 5 лет назад
Very interested in the CR-10 to build geometric objects from an STL file up to about 15". I noticed you print different artwork. How do you create a file for non-geometric objects like horses, helmets etc?
@BlackArroToons
@BlackArroToons 3 года назад
Very nice. Any chance Mighty Jabba's Collection will print out a Rancor in any scale and then paint it? That would be awesome to see.
@chevyspeed6368
@chevyspeed6368 6 лет назад
Great Video! amazing printer and I'm really surprised of the quality prints you are getting out of this thing. I recently bought the Prusa i3 MK2s and love it, but I was bummed when I couldn't print large prints like yours. By the way I just printed the Millennium Falcon on my printer on .1mm layer height at slow speed and I still got the banding like you did. I really think the banding is due to the model and not your printer. I'll be looking at getting this printer to just print the larger things I can't do on my Prusa.
@Cooldude-rv8wd
@Cooldude-rv8wd 6 лет назад
Great video man
@Cofresi100
@Cofresi100 6 лет назад
loving this
@damasydia
@damasydia 6 лет назад
Great review, I am considering this printer, it will be another tool in my woodshop, go you know of a cover or do you keep yours in a regular living space
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I have mine in the basement out in the open. I know a lot of people have built enclosures and the like, and that's basically a must for printing something like ABS. But I don't think there are any commercially available enclosures.
@yomero7
@yomero7 5 лет назад
Awesome prints! I think the gosthing is caused because of your table, is not stable enough
@trickytricky100
@trickytricky100 6 лет назад
Hi thanks for a grate blog, im new to this need to get one of these printers in hooked, do you no whats the best site to join were i can get hobby downloads like what you have printed off, Thanks
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Thingiverse.com is probably the main site, but there are many others like myminifactory.com.
@akshayd211
@akshayd211 6 лет назад
How much for the small millenium falcon? Awesome. Subbed.
@stretchx
@stretchx 6 лет назад
Hi - Do you have any plans to do an updated review that more so follows this review? You said about the longevity of the printer since people have only had it a few months so it would be good to hear about if you have had any issues with it.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I did make another video about an issue I had with the printer (faulty heater cartridge) shortly after this review came out, so you can check that out. Aside from that, I haven't really had any issues and I have been using it a fair amount.
@stretchx
@stretchx 6 лет назад
Just watched it now & seems like a bit of an annoying issue to have but your solution seems pretty good. Have you ever thought about painting some of the models you print? Either way, I've subscribed & will be looking forward to more of your content :)
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I do paint some of them, most recently a Santa Porg that I showed on my Instagram account. I have shown them in a few videos as well. instagram.com/mightyjabbascollection/
@georgebabcock9983
@georgebabcock9983 4 года назад
Really thinking about getting this :) have you done an update on this?
@sehattonii
@sehattonii 6 лет назад
Now I HAVE to purchase the CR-10. Next up, start to learn the in's and outs.
@drolsisusej100
@drolsisusej100 5 лет назад
Is there anyway to make a perfect circle with out artifacting?
@attilarivera
@attilarivera 6 лет назад
Amazing!!!!
@RabbitsInBlack
@RabbitsInBlack 6 лет назад
I extended some of the cables and extended legs so I can put the control box under the CR-10 and put a spool holder on top. That's how to put it the Creality in a smaller space.
@DZdiode
@DZdiode 6 лет назад
Hi, thanks for the review! Very informative. When you say I didnt bought the CR10 for printing small object, is taht mean the CR10 isnt the best for printing small objects? thanks :)
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
PXXX Actually it’s fine for small things. I guess it depends how small you mean, but it’s about the same as other similar printers.
@KoalatyGamer
@KoalatyGamer 5 лет назад
the speed of the movement of the extruder while its printing,if you do not have a sturdy take it messes a lot up.had mine on a light plastic picnic table.
@bobblackmesa7914
@bobblackmesa7914 2 года назад
You think you would be able to resize that luke head and make an ultimate luke head for, say, a black series figure?
@rhiannonmarston5315
@rhiannonmarston5315 6 лет назад
I would like to see you paint that Luke bust, it would look awesome
@macmund
@macmund 5 лет назад
Wow! You used the cr10? At 100% scale or you adjusted it? Thanks
@richardabner9420
@richardabner9420 6 лет назад
Good Video. Hey where can I get an a model file for to he Dekapa Cat or the two files needed for each half? Thank you
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
It's available on Thingiverse. Search "CR-10 cat" for the actual file, or "decapicat" for the joke version someone made.
@computerjantje
@computerjantje 6 лет назад
oh my god. Already pure to get me a millennium falcon of this size, I want this printer so bad :)
@KyleTaylorOrionCUSD223
@KyleTaylorOrionCUSD223 6 лет назад
What program are you slicing with? Cura? Slic3r? Simplify3D? What settings? I just got my CR-10 and have a couple successful prints, but they were off of the SD that was included. I used Notepad++ to edit the bed heat to 70c since I have a room which is a bit cooler than most and all was well. I really liked the video. keep up the nice work.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+Kyle Taylor I use Simplify3D with a modified version of Chris Elkin’s profile that you can get from the Facebook group. Generally I use 0.24 or 0.32 layer height since anything lower takes forever.
@Minzmarshmallow
@Minzmarshmallow 6 лет назад
Hi, how much filament did u used für the small and the big Jabba?
@computerjantje
@computerjantje 6 лет назад
Would this printer be able to create the r2d2 dome in fewer parts and therfor make the roundnes even better and less work afterwards?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
To some extent, yes. I believe the designer of the R2 model has a version of the dome that is divided into fewer pieces that could work on the CR-10. It would still require quite a bit of finishing though, since the dome is still much larger than the print area.
@InlineSkater44
@InlineSkater44 6 лет назад
very nice Fillennium Malcon
@Southrner
@Southrner 4 года назад
My cr10 came with a baby alien ghost loaded in... Still have that first print!
@marcofanuntza
@marcofanuntza 6 лет назад
LOL also with me the "decapitated cat"
@PilotDamian
@PilotDamian 6 лет назад
Hello. Awesome video!! Was trying to find a way to get in touch with you, I want to buy that millennium falcon the big one you printed. Get in touch with me please, thanks!
@jonhuss6783
@jonhuss6783 3 года назад
Hello, I have a Creality CR-10S Printer that I can't get to print. The z Axis goes up and down when homing but won't When Printing. It just stays on the first layer. Is this a printer problem or am i doing something wrong in Cura ?
@brianespinoza2034
@brianespinoza2034 5 лет назад
a good tip i got was "add support structure as tall accident prone prints get taller and taller
@SAS0201
@SAS0201 6 лет назад
Hello! How much does millenium falcon weigh? How much filament went to him?
@KiaranScath
@KiaranScath 6 лет назад
If you want to print the Fillenium Malcon even larger, I've uploaded a remix of it to Thingiverse that has it sectioned into 7 parts with locating pins.
@TwentyFourSlevin
@TwentyFourSlevin 6 лет назад
Link please :)
@simonfredriklund
@simonfredriklund 6 лет назад
i cant find it on thingiverse could you please provide a link
@simonfredriklund
@simonfredriklund 6 лет назад
i couldnt find his but i found this www.thingiverse.com/thing:2021023
@chrispomianek3470
@chrispomianek3470 6 лет назад
I plan on getting the s5 version and printing the rancor skull as big as it will go and putting it on the wall as a "trophy".
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+Chris Pomianek That sounds awesome although it would take a looong time
@chrispomianek3470
@chrispomianek3470 6 лет назад
Mighty Jabba's Collection yeah I had a feeling it would!
@thehorseman1806
@thehorseman1806 3 года назад
I plan to be buying a creality cr10 s4 very soon. I want to printer pumpkins with "carved" designs I wouldn't have a hope of doing myself. What software/program for design would you recommend? Thanks!
@MightyJabbasCollection
@MightyJabbasCollection 3 года назад
Well honestly I’m not sure about pumpkins but if you have no experience with 3D design you could start with something like TinkerCAD. Then maybe move up to something else if it doesn’t do what you need
@thehorseman1806
@thehorseman1806 3 года назад
@@MightyJabbasCollection I mean, the designs in my head are pretty simple to be honest. A person who loves to carve could do them all without issue. After seeing what types of things people r printing im sitting here thinking that my designs would be Way too simple. I guess I'm just trying to figure out the easiest way to get the Shape of a pumpkin. Ill try ur idea, thanks again!
@mr.e5930
@mr.e5930 5 лет назад
is there a way to make the detail quality better?
@drpickle7457
@drpickle7457 3 года назад
That line you had with the r2 is a layer shift I think.
@lifeisgood070
@lifeisgood070 6 лет назад
Can you print all 310mm x 310 mm on this? I'm trying to do a print and I've got to change my cura settings, but I'm curious if anyone has done it.
@jacklyons7587
@jacklyons7587 6 лет назад
what slicing software did you use
@Ozzie4Para
@Ozzie4Para 4 года назад
Where can I get the R2D2 shown in the video? I clicked on the thingiverse link and it's broken.
@bhavyamgoyal1770
@bhavyamgoyal1770 5 лет назад
hello I just bought this printer from banggoods.com it has not arrived yet but I am excited to assemble it. In the video he said it is not good for long term is it true cause I plan to keep it for quit some time in good condition, any other advice as this is my first 3D printer?
@jacklyons7587
@jacklyons7587 6 лет назад
what slicing software did you use @Mighty Jabba's Collection
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Jack Lyons I pretty much always use Simplify3D
@cosmothemagician3896
@cosmothemagician3896 6 лет назад
Hey thanks for the great review/video! I have downloaded the file from thingiverse, I use slic3r and repetier host, when I load it, it says the model is not "watertight" and needs fixing, I allow it to repair it, and when I print it, it doesn't print right, it comes out very mushy. I'm using PLA with setting that work with all other models I print. any suggestions? thanks again for all your great videos!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Which model are you talking about?
@cosmothemagician3896
@cosmothemagician3896 6 лет назад
Omigosh, I'm sorry I meant to say the Millennium Falcon www.thingiverse.com/thing:919475
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I have never used slic3r or repetier host, so I can't say anything specific about that. But I don't believe there should be any problems with that model that require repair. Have you tried Cura?
@mathewdoe1577
@mathewdoe1577 6 лет назад
How much filament did this take?
@wlehtola
@wlehtola 6 лет назад
Mighty Jabbas Collection how much space does the whole set up take up. I.e. what is the footprint
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
There is a bit of wiggle room because of the way the control box is attached by cables, but generally I would say it’s about 29 or 30 inches wide, slightly over 24 inches tall, and maybe 30 inches deep (because you have to leave room for the bed to move back and forth). Hope that helps
@ronalddvorak1967
@ronalddvorak1967 5 лет назад
Just bought, I guess a clone of the Creality CR-10, which is the Aibecy CR-10 3D Printer. Hopefully it is just as good as the original.
@shako4907
@shako4907 6 лет назад
I bet 10 dolllars that the printer took shorter to build than the Ikea table
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
That's not too far off!
@wlehtola
@wlehtola 6 лет назад
Mighty Jabba's Collection what is the footprint of the whole unit. What kind of space do I need to have
@kitecattestecke2303
@kitecattestecke2303 6 лет назад
Does this thing also print finer structures? Like a little detailed stuff
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Sure. I was trying to show how it was different than other printers, with its huge build volume. But it can also do small details just like any other printer.
@plexion01
@plexion01 5 лет назад
What speed do you run this printer at?
@PS-nf3xw
@PS-nf3xw 6 лет назад
Tried the two z axis mods?....can you mod the twin axis to run on single motor?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I haven't tried them myself. What advantage would there be to using a single motor?
@kahunavirus7534
@kahunavirus7534 6 лет назад
What makes your passion for Jabba so strong?
@ArtSurroundsYouAll
@ArtSurroundsYouAll 6 лет назад
Can anyone tell me which model of the CR-10 range this is, I know its extended but wondered if this was a CR-10(S)..also their is the 3S, 4S and 5S...would appreciate any help guys.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
This is just the normal, entry-level CR-10.
@Rafael-co5wy
@Rafael-co5wy 6 лет назад
which print speed did he use 100?
@jboy27
@jboy27 6 лет назад
that is my Jabba the Hut model in the intro
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+john bryant Thanks for putting it on Thingiverse. Although the one in the introduced is the smoothed out version I posted
@jboy27
@jboy27 6 лет назад
Mighty Jabba's Collection you did a good job painting it. I remembered seeing that some one had smoothed it
@rgdi
@rgdi 6 лет назад
Hi! Great video! New subscriber! I´m making my homework before buying my first 3D Printer. The CR-10 seems to be one good option, I want to print in PLA and ABS as a hobbie, but as anyone, I want the best bang for the buck. So, in your experience, what other choices do you recommend in the $500 US dolar range or lower? I started looking at the Tevo Tarantula, then the Anycubic i3 Mega, and the CR-10. Cheers!
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Raúl Galindo I don't have any direct experience with the others so it's difficult to compare. I suppose part of it depends on whether you really need the large build volume of the CR-10
@rgdi
@rgdi 6 лет назад
Got it! so, if you could recommend a replacement for the CR - 10, which one woul it be from the ones that you already have tried?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I've really only used a handful of printers so it's difficult to make other recommendations. From watching of reviews, though, in this general price range I think the CR-10 is probably the best
@AntsPlants
@AntsPlants 6 лет назад
what speed are you printing at ??
@grazynagpetersen8717
@grazynagpetersen8717 6 лет назад
Would you take project requests and sell them?
@thePunisher95125
@thePunisher95125 5 лет назад
I like to see you use your CR-10 print Hogwarts Castle and make it the size you printed the second Millennium Falcon or taller if you're up for it.
@telefonetoca
@telefonetoca 6 лет назад
I need to use a painting for the colored ones?what kind a paint ?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Nando Edgar If you just mean the single color ones, they use colored filament. But if you want many colors you can use acrylic paint
@CMCustom112
@CMCustom112 6 лет назад
A guy I am in a FB star Wars group with Just bought one and is working on the Hovertanks in 6 in scale for Black Series figs. It is a WAY better printer than the one he had.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Sounds very cool!
@limitlesschoices
@limitlesschoices 3 года назад
Time for me to get a 3d printer.
@chrispomianek3470
@chrispomianek3470 6 лет назад
Awesome Jabba statue. Did you happen to load that file to Thingiverse?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Chris Pomianek Links for everything are in the description. I also made a piggy bank version of the Jabba statue
@chrispomianek3470
@chrispomianek3470 6 лет назад
Mighty Jabba's Collection thank you!
@byronkobialko3442
@byronkobialko3442 5 лет назад
I can't seem to find the CP3O and R2D2 thingyverse stl....
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
They seem to have been removed, but they are still at myminifactory: www.myminifactory.com/object/3d-print-low-poly-r2d2-and-c3po-26363
@dronetrooperfpv7810
@dronetrooperfpv7810 6 лет назад
Is it cheaper to by the CR-10s or mod the CR-10 to be up to par? I am deciding on buying one of them. It will be my first printer.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
I’m pretty sure it’s cheaper to just buy the CR-10S, although I’m not entirely sure that the additional features of the S are really worth the additional money. The extra Z axis rod doesn’t seem to improve print quality, the filament sensor has given me a lot of false positives, and the power-loss resume feature is apparently actually included in the newer non-S models even though it isn’t advertised.
@dronetrooperfpv7810
@dronetrooperfpv7810 6 лет назад
Mighty Jabba's Collection Thanks for your video and advice
@Omazone
@Omazone 6 лет назад
Mighty Jabba's Collection is this one good for printing real persons in 3D using their photos? or there is another one recommended?
@Omazone
@Omazone 6 лет назад
is this one good for printing real persons in 3D using their photos? or there is another one recommended?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
If you mean using photogrammetry to create a 3D model from dozens of photos, then that is possible, but it doesn't really have anything to do with this printer. You can certainly print the resulting model with this printer, but it has no functions that will help you create the model. And if you mean creating a 3D model from a single photo, that isn't really possible.
@Omazone
@Omazone 6 лет назад
Mighty Jabba's Collection do you know a name of programs for creating 3D model from photogrammetry or a video to learn how to use it?
@michaelclark1544
@michaelclark1544 6 лет назад
can you sand the plastic smooth?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
You can to some degree. It's often easier to get it smooth if you use a gap-filling primer or putty and then paint over it.
@charlesforbin6937
@charlesforbin6937 5 лет назад
Can't decide.....I want Prusa quality but cr10s built size....any advice would be most appreciated oh Mighty Jabba.....sorry I have no droids to offer you in payment your hutness..... Thanks
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
I’m not really sure what to tell you since I haven’t used a Prusa, but I have heard good things about them and I imagine they are better quality overall than the CR-10. Of course you do pay for it.
@JAGATechnologies
@JAGATechnologies 6 лет назад
Do you know what the difference is between the upgraded and regular one?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
+JAGA Technologies The CR-10S has two z-axis leadscrews, a filament runout sensor, and slightly different firmware. (I’ve heard that the latest ones can also resume after a power outage but I don’t know the details.) I think that’s all of the differences. I’m not entirely sure it’s worth the extra money. I recently received a CR-10S4 for review, which basically a larger version of the CR-10S, so I will be posting a review of that at some point (still have to put it through its paces).
@JAGATechnologies
@JAGATechnologies 6 лет назад
Awesome, I will be looking forward to your review of the new model! Great video!
@madyet5235
@madyet5235 6 лет назад
have you used tpu with it? thanks.
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Mad Yet No, as of now I have only used PLA but I would like to try some other types of filament.
@simpson1704
@simpson1704 5 лет назад
What slicer program you using with your prints?
@MightyJabbasCollection
@MightyJabbasCollection 5 лет назад
I use Simplify3D almost exclusively
@commanderwyro4204
@commanderwyro4204 6 лет назад
i want this so bad! i got my monoprice mini today but the micro usb port was completely ripped out so im waiting for my refund and will be picking this one up
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
Commander Wyro Cool. The Mini is supposed to be good but the small size is pretty limiting
@LouCypherro
@LouCypherro 6 лет назад
Hi, can anyone tell how long it takes to the printer to print a real sized human head using CR-10? I am also interrested in how much filament it might take. Another question that may be a bit naive is if I will be ready to pring such a head right away after assembling the machine?
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
There are a lot of variables that make it difficult to generalize, such as the amount of detail you want, how sturdy you want it to be, etc. It could range from maybe 20 hours to several days. What are you planning on using it for? You would basically be able to print it right away, yes.
@LouCypherro
@LouCypherro 6 лет назад
Thank you for replying. I wish to print a head. Based on a 3D scan. With as much details as possible. I saw a vidoe of a Terminator head print and it took like 2 days or even more. However I am affraid the detail level in case of a realistic human head must be way higher. Would I need to get some extra CR-10 extensions to have it printed better? I can see a lot of those on gear best. Still have to read a lot...
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
It could take several days in that case, but if you have no experience with 3D printing, I wouldn't suggest starting with that right away. It can take a while to figure out what the best settings are, etc. I'm not sure what CR-10 extensions you are referring to. There are some larger versions of the CR-10 that can print bigger things, but I don't think that would be necessary for a head.
@LouCypherro
@LouCypherro 6 лет назад
By extensions I mean the other size extruders (0.4-0.1mm), auto leveling module, etc...
@MightyJabbasCollection
@MightyJabbasCollection 6 лет назад
A smaller diameter nozzle probably wouldn't help much in this case and would make it take much longer to print. Auto-leveling is more of a convenience feature than anything.
@The_Traveling_Mayo
@The_Traveling_Mayo 4 года назад
What are your thoughts on the cr10 mini?
@MightyJabbasCollection
@MightyJabbasCollection 4 года назад
Hootdoog Games I reviewed it on the channel. Basically it’s fine but there doesn’t seem to be much point to making it smaller since the footprint doesn’t change all that much and it’s not that much cheaper. You might as well just get the bigger CR-10S
@The_Traveling_Mayo
@The_Traveling_Mayo 4 года назад
Mighty Jabba's Collection ok thanks for the help
@fastcarippolito68
@fastcarippolito68 6 лет назад
hello I am looking to buy my 1st 3d printer . ok thanks William
Далее
Make Insanely Huge Prints on the Creality CR-10 S5!
18:28
Make Insanely Huge Prints on the Creality CR-10 S5!
Просмотров 395 тыс.
Creality CR10S Full review! Is it better than old CR10?
20:33
Creality CR10S Full review! Is it better than old CR10?
Просмотров 709 тыс.
НУБ ИЩЕТ ЖЕНУ В GTA SAMP
22:34
НУБ ИЩЕТ ЖЕНУ В GTA SAMP
Просмотров 197 тыс.
你们会选择哪一辆呢#short #angel #clown
00:20
你们会选择哪一辆呢#short #angel #clown
Просмотров 7 млн
MC TAXI: АК-47
35:14
MC TAXI: АК-47
Просмотров 527 тыс.
Подъёмный кран из полена и доски #diy
01:00
Подъёмный кран из полена и доски #diy
Просмотров 75 тыс.
Creality CR-10 Update -- Adventures in 3D Printer Repair
11:09
Creality CR-10 Update -- Adventures in 3D Printer Repair
Просмотров 16 тыс.
Creality CR-10 Calibration, Settings, and First Print!
12:06
Creality CR-10 Calibration, Settings, and First Print!
Просмотров 221 тыс.
Polymaker Polysher Review - 3D Printing with No Layer Lines using Polysmooth?
15:25
Polymaker Polysher Review - 3D Printing with No Layer Lines using Polysmooth?
Просмотров 718 тыс.
Creality CR-10 - Is It The Best 3D Printer? My Review
12:10
Creality CR-10 - Is It The Best 3D Printer? My Review
Просмотров 980 тыс.
How to Copy (almost) Any Object
18:38
How to Copy (almost) Any Object
Просмотров 1,1 млн
Creality CR10 S4 3D printer Full Review! Is it better then CR10S?
16:44
Creality CR10 S4 3D printer Full Review! Is it better then CR10S?
Просмотров 139 тыс.
I bought the cheapest 3D printer on AliExpress!
22:42
I bought the cheapest 3D printer on AliExpress!
Просмотров 876 тыс.
3 Ways to Silence your CR-10
14:35
3 Ways to Silence your CR-10
Просмотров 109 тыс.
Better Than the Creality CR-10? - Anycubic i3 Mega Review
6:25
Better Than the Creality CR-10? - Anycubic i3 Mega Review
Просмотров 617 тыс.
Carbon Fiber 3D Printer Filaments: What Are They Good For?
26:17
Carbon Fiber 3D Printer Filaments: What Are They Good For?
Просмотров 732 тыс.
Just a joke 😂
0:11
Just a joke 😂
Просмотров 2 млн
Дед и новая машина😁
1:00
Дед и новая машина😁
Просмотров 2,2 млн
Люди были шокированы от увиденного 🤯
0:29
Люди были шокированы от увиденного 🤯
Просмотров 3 млн
Наказал наглых воришек и показал авторитет #shorts #фильмы
1:00
Наказал наглых воришек и показал авторитет #shorts #фильмы
Просмотров 3,9 млн
Не хватило денег на хлеб #лучшиефильмы #сериал #кино
0:57
Не хватило денег на хлеб #лучшиефильмы #сериал #кино
Просмотров 6 млн
Мама этого щенка отдаёт всё ради него!❤️
0:57
Мама этого щенка отдаёт всё ради него!❤️
Просмотров 2,8 млн
Became invisible for one day! #funny #wednesday #memes
0:25
Became invisible for one day! #funny #wednesday #memes
Просмотров 42 млн