Creality CR10 S4 3D printer Full Review! Is it better then CR10S?

Подписаться 107 тыс.

Просмотров 140 тыс.

50% 1

Hi Guys! This is full test and review of enlarged version of Cr10 called Cr10 S4 with huge print volume of 400x400x400mm. This 3D printer height almost 20KG and it has rock solid metal frame, very robust construction. This video includes: Unboxing, assembling, hardware overview, time laps printing, detailed look at test prints( 760% scaled up 3D benchy) and closer look at inside components and many more.
It's got to point that the latest version of CURA now supports Creality Cr10 3D printers directly in the printer many, so printer setup was never been so easy. Big thanks to the CURA team! Now in less then one minute CURA slicing software can be configured to run Cr10, Cr10S ,Cr10s4 or Cr10S5 and you got even decent printing profiles which is awesome! If you are looking for good and reliable large scale 3D printer with affordable price Cr10S4 is a good choice. To get one for yourself check the links below:
Get the Creality3D CR10S4 from:
Amazon - amzn.to/2ZYsuBu
Banggood - goo.gl/EKmeqw
If you need even larger and newest machine with auto-level go with the newest Creality CR10 Max!
CR10 Max review video - • Creality CR-10 Max 3D ...
Get your Creality CR-10 Max from:
Amazon - amzn.to/32F8ulM
Banggood - bit.ly/2Srw8gZ
Popular Online retailers:
Amazon.com - amzn.to/3k08g0K
Amazon.ca - amzn.to/3c3efiJ
Amazon.de - amzn.to/3rnvj9l
Amazon.co.uk - amzn.to/3blB2qY
Amazon.se - amzn.to/3bhU55l
Aliexpress - bit.ly/2GWF50w
Banggood - bit.ly/2T0R8fG
Ebay - ebay.us/OJuoTs
Cheap filament for 3D printer:
PLA filament for 3D printer
On Amazon - amzn.to/2K6U99U
On Banggood - bit.ly/2pZSiwK
PETG filament for 3D printer
On Amazon - amzn.to/36RHEsz
on Aliexpress - goo.gl/8Cfsrb
ABS Filament for 3D printer
On Amazon - amzn.to/2K5S4LH
On Banggood - bit.ly/2CurLuc
Heat bed mosfet module -- goo.gl/91i7bQ
3D printing surface:
Sticker - goo.gl/WTmmiM
Glass - goo.gl/3GqP6Z
BueTape - goo.gl/7vQMYp
Switch for PSU - goo.gl/sKzzkg
Rubber Timing Belt - goo.gl/3xtQPv
SCS8UU-8mm-Linear-Ball-Bearing - goo.gl/88pgGV
Gear that I use for my videos:
www.nexi-tech.com/gear-that-i-...
You like what I do? Support me on Patreon
/ nexi_tech
I put a lot of effort and time in my videos and I would appreciate if you click on the ''Like'' and ''subscribe'' button.
Thank you so much for your support.
Best Regards!
Nexi
Music by:
Adventures by A Himitsu
/ a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music released by Argofox • A Himitsu - Adventures...
Music provided by Audio Library / mkneiug

Наука

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 202

@g00fysmiley 5 лет назад

Your vids are super helpful for a newbie to the 3d printer like me. Thanks for doing these step by step videos, they are great!

@jr3dp840 3 года назад

I have to agree with everyone else. By far the best unboxing/review video for this printer. I have been contemplating buying this printer for a few months now but after watching your video I will definitely be purchasing it! Thank you!

@hologram94 6 лет назад

The quality of the prints are amazing! Wowwww, I subscribed!

@NexiTech 6 лет назад

Yes is awesome! I love it :)

@starby1243 6 лет назад

Easily the best reviewer. I love this channel.

@pacowang283 6 лет назад

That was one of the best reviews I have ever seen. Well done sir.

@NexiTech 6 лет назад

Thank you so much. Best Regards!

@user-sf6gy9tu1p 6 лет назад

PacoWang o

@dvdrwsor 6 лет назад

You got at least 500 likes just for opening the box controller.

@TheTinkersWorkshop 6 лет назад

Excellent video! Thank you for such great information on setting up my CR-10 S4!

@NexiTech 6 лет назад

You Welcome Dave! Thanks for stopping by :)

@dguy-xk4fc 6 лет назад

Wow that benchy is huge, it looks so funny with the little one on top haha nice man! Very nice video. Very cool printer, too bad it lacks a heated bed, it is nice to print PETG now and then.

@eKamid 5 лет назад

Your benchy quality is perfect, but please share the settings with us. Being from those with an ugly benchy a big help will come from you telling us the settings and also please include the retraction distance and speed as I'm not managing finding an equilibrium between these two Thanks

@1Saltyone 6 лет назад

YES PACO WANG SAYS IT ALL , THANKS FOR GREAT FULL INFO

@Caverntwo 6 лет назад

Nice video again! I really like these gigantic prints ;-)

@NexiTech 6 лет назад

Thank you mate! I like it too! :) Standard size 3D benchy looks so tiny comparing to Titanic Benchy :D

@tronicHardware 6 лет назад

Amazing review. Well done!

@NexiTech 6 лет назад

TronicHardware Thank you!

@manuelcastrou79 6 лет назад

Thanks a lot! For this review I decided to buy this printer!

@NexiTech 6 лет назад

Manuel Castro You welcome! :) Good luck with your new 3D printer and thanks for stoping by.

@tooreosonecup4995 5 лет назад

Manuel Castro I’ve also decided on this printer. Could I ask how it’s doing now?

@astroplutonium 5 лет назад

Love your videos, i have a question. I have an Ender 3 and want to upgrade. Between Ortur 4 and AnyCubicKossel7 which one would you consider as a better upgrade?

@Motion_0112 6 лет назад

from what I have seen, the function that makes printing can be continued if there is a blackout, it is also in the CR-10S but the one in the name "Upgrade version"

@ethansdad3d 6 лет назад

Great review. What sized nozzle do I need? I've ordered one of these printers and I'd like to order the 0.5mm and 0.6mm nozzles before it comes. Thank you.

@valdemarjust 6 лет назад

One of the best reviews i have seen! Would be nice if you say how long each print took :)

@NexiTech 6 лет назад

Thank you so much! Time will add in next review :) Cheers!

@yousseramcf2539 Год назад

Thank you for the good quality video Can you tell me how am i supposed to know the température of each print and the spacing?

@MarkWilder68 6 лет назад

So is the CR10S the same as the CR10S4 just a smaller version? I don't plan on making anything huge so how do they compare? Again the terminology I need to learn because if I have an issue I don't know how or what adjust to fix. Can you speak on that so we (I) can learn if this happens in a print adjust this, but if this happens to adjust that? That's what I need to know how to make adjustments to get the perfect print like you have. Also, do they come with both nozzles? Great Vid thank you

@CrashPCcz 6 лет назад

Thank you for great review! It played great part in my decision. Now S4 is being shipped to me....

@CrashPCcz 6 лет назад

Hey. Got it assembled and working. Compared to expectations, it was a nightmare, and I wouldn´t recommend it to any newbie. Bent hot end assy, impossible to home the X axis to the end-stop, as the bottom wheel screw and nut blocked it, so had to drop the hot end, belt, everything, make the screw and nut shorter, and reassemble. Anyway Now, before advanced upgades, it printed 3D benchy without infill, without retractions and no tuning, quite well. Like 98% of the well tuned Original Prusa i3 MK3! I´m getting excited to get it upgraded and tuned!

@mhgscrubadub9917 6 лет назад

selling my old printer to get this one. This one looks amazing

@lyrana 6 лет назад

Hi I plan on getting one, any chance you can show how to modify to do flexible filament?

@armoredcharlie301 6 лет назад

So basically just download cura and choose the printer you have and it gives you the perfect settings? No need to touch them? Am new to 3d printing and thats a huge help for me.

@lifeisgood070 6 лет назад

So what's the best printer for ABS or general printing around or under $400? Any printers that do multihead? Looking for disolvable supports. I'm thinking it's not possible under 1k. The Prusa with multi filimiment attachment is $750+$300+.

@rohansully584 6 лет назад

Thanks for the video!

@NexiTech 6 лет назад

You Welcome! Thanks for stopping by. :)

@tiberiocellini3641 6 лет назад

Nexi Tech is the print quality the same as the cr-10s?

@0thers1d3 2 года назад

You sold me on this!

@viaJustin1910 6 лет назад

I am looking for a 3d printer for around $500 do you think that this would be a good option? What website would you recommend going through? I see that this video was made last year do you think I should invest in a newer model?

@hoppynaki 6 лет назад

Great video. Watching this has reinforced my decision to buy this printer. I see that you print directly onto the glass bed. Do you use anything to assist stickability? Thanks.

@NexiTech 6 лет назад

Thanks mate :) I'm glad that you like my video. Yes I used Aprinta Fix adhesive spray but you can also use glue stick, hear spray, blue tape etc...

@clod2692 6 лет назад

Whats the dimension of the cr10s printer itself? Because i have a small space to place a 3d printer, probably this is too big, but the cr10s maybe could fit.

@ThiHexCrew 6 лет назад

Nexi what 3D Printer would you reccomend for a beginner, I hear the CR-10's are really good but very hard to set up if you have no experience like me.

@NexiTech 6 лет назад

Thi HexCrew Then I would go with Anycubic I3 Mega or flashforge Finder. They are best for beginners. You have both review on my channel. Check them.

@scott7305 5 месяцев назад

I’m a beginner. Do you have to use a glass panel for printing on?

@ignaciosalinas2154 6 лет назад

What is the best way to calibrate the cr10 s4 bed??

@SpicyDorito96 5 лет назад

Was the first print the default settings for cura

@AncientAbsWisdom 5 лет назад

Sorry...a newbie question. My designer would supply me with an STL file. What do I drive the machine from. I have Mac's running a variety of different OS from older to quite recent. What's the driver OS software please?

@tzachus 5 лет назад

Looking for the exact dimensions of a heating plate CREALITY CR-104S Dimensions between the holes and the length and width of the heating plate? pls help

@lyrana 6 лет назад

Thank you just got one with your coupon!!

@NexiTech 6 лет назад

LyranaH Awesome! You welcome :)

@tiberiocellini3641 6 лет назад

Nexi Tech Can the bed be upgraded as you did for the normal size cr-10? is that 30x30 silicone heater you shared large enough?

@NexiTech 6 лет назад

Tiberio Cellini Yes it can. There is 400x400 silicone heater for CR10S4 as well.

@gastonbarouille767 2 месяца назад

Do you know where to buy the CR 10 S5 or the CR 1000S?

@igotsth 6 лет назад

8:49 if you double up the nozzle size, you use 4 times more filament not 2 times.

@CrackedTubeGamer 6 лет назад

Sky L nice catch :)

@dpqbpqbdpqbpqb4754 5 лет назад

derp

@sisilodobsis 5 лет назад

@@dpqbpqbdpqbpqb4754 Area of a circle is pi*r^2, you have the circumference formula.

@dpqbpqbdpqbpqb4754 5 лет назад

@@sisilodobsis Sadly, embarrassingly, im the guy who frequently points out the exact opposite, because circumference comes up all the time, and people r square it. I will find the nearest tall building, and jump.

@ediles7678 5 лет назад

great video but i was wondering if you had links to a better HEAT BED adjustment knobs for the CR10 S4?

@NexiTech 5 лет назад

Ed Iles Here my friend: www.thingiverse.com/thing:2462249

@ediles7678 5 лет назад

there is not enough room to put a knob like this on because of the distance between the bed screw and the bed rail on a cr10s4

@Munky332 6 лет назад

Do they sell CR10 kits minus the electronics? ie I'd just need the frame, bed, and bearings/mounts/brackets, etc...

@ELValenin 5 лет назад

They don't

@robinjperez 5 лет назад

Could I print samples using Ninjaflex or Nylon?

@TheAwesomeSam 6 лет назад

I just ordered the CR-10 S4. Can you tell me the footprint dimensions of the S4? I am looking for a workbench or table for it. I want to make sure it fits on the table. Thanks!

@NexiTech 6 лет назад

Of course Sam! Bare S4 frame on which is 4 rubber feet is 50cm wide and 60cm long. Whole printer with control box and 1Kg of filament takes 70x86cm of footprint.

@xXN30NxGR33NXx 6 лет назад

Hey, great job on the review, very well made. After starting a 3DPrinting Business a few weeks ago, I am now looking to expand my ventures towards starting a youtube channel also. I really take inspiration from your videos and have a close look at how you do things. I would really love to maybe ask you one or two things in the future about starting this kind of a youtube channel. I currently own an Anet A8 converted to an AM8, a Startt, an Mk2 with Multimaterial and am waiting for 3 printers to come right now which would be the Anycubic Kossel Linear Plus, CR-10 Mini and the Prusa Mk3. I am planning to make videos on all of those, but wanna first get some inspiration to not mess them up completely. keep up the great work, you developed great. the first video I saw from you was last december and it was about your anet a8 mods ;D would love to have a talk with you some times ;D

@ThiHexCrew 6 лет назад

3D Makerbear what model would you recommend for a beginner? I’m new to the 3D printing world

@xXN30NxGR33NXx 6 лет назад

Thi HexCrew do you mean what printer model or d you already have a printer and looking for something to print?

@ThiHexCrew 6 лет назад

What is a good first 3D printer to buy? I do not own one currently

@xXN30NxGR33NXx 6 лет назад

Thi HexCrew I really don't wanna mess around under Nexi's video. But depending on your budget I would recommend you printers like the Anycubic i3 Mega, all the CR10 Printers and if you have a bit mor budget go for something like an Original Prusa ;)

@xXN30NxGR33NXx 6 лет назад

Maybe Nexi can also give you some tips, after all this is his channel and he makes great videos ;)

@dylancronin7710 4 года назад

Can anyone provide me the heated bed cable support upgrade stl. I absolutely need it, mine broke off weeks ago! Thanks.

@gvsdddogggify 6 лет назад

where do I buy the PETG insulation? thanks for the video.

@NexiTech 6 лет назад

PETG is filament you have links in video description.

@ledfed1912 6 лет назад

I like the size, but not being able to print abs well enough is a bummer, so i got the cr10s.

@NexiTech 6 лет назад

CR10S is better for ABS and PETG prints Good choose. Check my video on the channel how to upgrade heated bed on Cr10S to heatup up to 135C under 4 min or you can install isolation only under heat-bed.

@jonhuss6783 3 года назад

Hello, I have a Creality CR-10 with dual z axis motors. The z axis goes up and down when homing but will not go up when printing. Is it the machine or am i doing something wrong in Cura ?

@NexiTech 3 года назад

That's very strange. Try to check or replace your SD card and printer settings in CURA. If printer is moving Z axis normally when homing then it could be somethig with G codes or bad micro SD card. Also try to move Z axis by manual using the printer interface. Also try to slice another 3d model as well.

@giannagiavelli5098 6 лет назад

can it do polycarbote?

@Robothut 6 лет назад

Can you provide the link to the CURA slicer that supports CR-10 S5, I just went to there web site and the newest version they show is 3.0.4 and in the drop down list of printers they support CR 10 is not on the list.

@NexiTech 6 лет назад

CURA 3.0.4 showes in ''other'' drop down list of Cr10 3D printers. Please check it and report back.

@Robothut 6 лет назад

I see what happened, before you start the down load they make you fill out a list of things like what you will be using the program for and so on , and on that pre down load list there is no CR-10 printers, but once you do the down load and set up CURA for your printer there is. Did you notice the strange things going on in the QUALITY setting's. The top setting is EXTRA FINE 0.06 then FINE 0.2 "WTF" then LOW QUALITY 0.15 "WTF" then DRAFT 0.2, Some strange things going on there. Have not tried the setting yet so it might just be a type O.

@NexiTech 6 лет назад

Robothut Yeah you are right that's wrong. They need to fix names of printing profiles. But to be honest am happy that they add printer settings so that we can add cr10 easy.

@gregorysharp7241 5 лет назад

The prints look amazing. Did any of them need support? It looks like you didn't use any.

@NexiTech 5 лет назад

Gregory Sharp Thanks! Nope, no supports needed.

@goldenmetalrat60 6 лет назад

Hi, I’m interested in getting into 3D printing. I subscribed because I have enjoyed your reviews. I was wondering about printing terrain items for dungeons and dragons role playing games, and I saw files for 3D printing a a web site fat dragon games. My question is how easy are these files to use for a beginner in 3D printing and what 3D printer would be the best to start with. Thank You Scott Olman.

@cahyopangestu3469 6 лет назад

Please review Athorbot 2 in 1 Dual Extruder Prusa i3 3d printer

@PavelAsmanov 6 лет назад

Спасибо, отличный обзор. У меня такой же акцент, однако. ;)

@ivanmlad 3 года назад

If you double the nozzle size, you don't double the filament usage, you actually quadruple the filament usage (the circle area), and print much more than double faster (depending on the printer ability with respect of temperature/speed .. it will probably not be a quadruple speed since it still needs some time to melt the plastic.., but will for sure be more than double faster), because the area for circle with 0.4 mm diameter is ~0.126 mm^2 (A = Pi x r^2), and the area for circle with 0.8 mm diameter is ~0.503 mm^2. - Great review though! Thanks for sharing.

@glumfish6862 5 лет назад

Would this be a good first 3D printer? I am in between this, the CR-10S Pro and the Prussa i3 Mk3S. The Prussa is very good but doesn't have enough build volume and is expensive which is why I am looking in the CR-10 line.

@ELValenin 5 лет назад

I've got a prusa i3 MK2S and think I'll buy the cr10 s4 in addition to it, either buy the prusa for print quality and reliability or the cr10 for big prints

@glumfish6862 5 лет назад

EL Valenin alright, thanks for the reply!

@ELValenin 5 лет назад

@@glumfish6862 but I think the prusa is better for beginners

@gravel86 6 лет назад

Great review, any plans on reviewing the CR10 mini?

@NexiTech 6 лет назад

gravel86 Thank you. Yes, review for CR10 mini I will upload by the end of next week I need to finish all tests first. This weekend review is planed for TEVO Tornado on which am working right now. Almost done with tests.

@gravel86 6 лет назад

Great I look forward to it. The Tornado looks a lot like the CR10S, look forward to that review as well.

@NexiTech 6 лет назад

Tornado review is uploaded on the channel. CR10 mini is coming next. Cheers!

@Sandokans 6 лет назад

I am subscribed to your channel. Please tell me, if STL corrupted files is allways a problem, when working with 3d printers, or is a rare problem?! Till when you worked with this printers, how many times, you have encountered STL corrupted files!? This i dont understand well. Thanks sir

@NexiTech 6 лет назад

Rohan 67 Hi and welcome. Corrupted STL files? That's very rare. I never personally had corrupted STL file and I have hundreds and hundreds of STL files on my PC more then 80% are downloaded from Thingiverse website. On some STL files 3D builder(3D program in Windows 10) found some geometry errors in 3D model and program fix them by itssel, but other then that I never had corrupted STL file. Are you sure you don't have problem with your PC? Maybe spyware, malware or virus? Or some register problems? None of files on your PC should be corrupted. Scan your PC using Malwarebytes program and run CCcleaner efter. Good luck

@Sandokans 6 лет назад

Nexi Tech Thanks now is much more simple for me.. Regards

@yousseramcf2539 Год назад

I just baught the cr10 s4 printerand i want to start learnin. Can some one send me a link of a vidéo tutorial for begginers as i didnt understand most of the terminologies

@sharahmaeso5204 6 лет назад

How do you get those fine prints? I get small lines

@ELValenin 5 лет назад

He has small lines too, if you want to barely see them turn the layer height all the way down to 0.05mm and you'll barely see them but it'll take really long to print.

@yosalov 6 лет назад

Coupons dont work. I want the sr4 400 x400x400 have a link with a coupon code?

@NexiTech 6 лет назад

Try again using coupon 400CR10 or 500CR10 of not I try to get one coupon code in 24 hours or less

@hasanjamalullail789 5 лет назад

if we compare this CR 10 to anycubic chiron which product do you chose base on your opinion?.

@NexiTech 5 лет назад

hasan jamal I choose Chiron! I'm currently testing final production version of Chiron and it's very good! Review is coming in a few days.

@hasanjamalullail789 5 лет назад

@@NexiTech nice because yesterday I was buy chiron on aliexprees to get discount on 11.11 special price. I'm waiting your review to make sure that I get the last model of chiron. thank's to reply my question.🙏

@Maxxifull 6 лет назад

I got this same S4 printer and have been happy with it. I insulated the heat bed and could get 91C degrees in a ~2h testprint session. Asking temp was 100C. pro-ht.mbnet.fi/3d_print/cr-10-s4/cr-10-s4_bed_heat_insulation.jpg Small ABS parts seems to print out pretty good, but bigger ones would need more bed temp, or a closed enclosure for the whole printer to reduce warping.

@JayRaxter 6 лет назад

That's the welder's flannel and heat reflection sheet mod right? I did the same mod on my S3 and got exact same results you did. (@91c bed max). Stopped using ABS because of all the new easily printable filaments that are so much better.

@Maxxifull 6 лет назад

I used 10mm thick self adhesive thermal insulation mat with aluminium surface and some aluminium tape on the edges. :)

@Maxxifull 6 лет назад

I was able to reach 101C degrees in my last ABS try, but I have trouble with lifting edges. Seems that the part sticking nicely to the tape I'm using but at these temps the tape itself lifts from the bed. Ordered buildtak surface for the bed, hope it resolves the trouble.

@matthewallen5742 6 лет назад

Do you have a link to the instructions on how to do this mod

@NexiTech 6 лет назад

Maxxifull I did this on my Cr10S crazy fast heatbed time! It can reach 135C degrades under 4min! Check video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IhjqfMHyBAI.html

@CaptainKiwiii 6 лет назад

Could you share the link to the modele at 12.28 please? Great video anyway!

@NexiTech 6 лет назад

Nydo Horth Sure mate! Here: www.thingiverse.com/thing:2376777 Cheers!

@CaptainKiwiii 6 лет назад

Big up to you! thanks

@josephzee 6 лет назад

Is it better to print straight onto glass , or use tape ?

@NexiTech 6 лет назад

I like to use glass, it leaves very smooth and mirror look on bottom surface. But keep in mind you will need some adhesive to prevent warping. You can use glue stick,hairspray etc. I like to use AprintaFIX spray. It leaves no marks on the printing surface and if you spray it once you can print several times before you need too apply it again. And just to mention its holding very strong print in place but in the same time its not hard to remove print from build plate. There is link in video description for AprintaFIX check it out and read all info about. Cheers!

@chuckdaniel817 5 лет назад

Glass for me. I've had issues with tape coming off. Never any issues with glass.

@bernardoramos9409 6 лет назад

Could you advice a good 3D printer for ABS?

@NexiTech 6 лет назад

Bernardo Ramos Yes,Tevo Tornado is good for ABS. It has AC powered Heated bed that can go up to 135 degrees. Check my detail Tornado review on my channel. Cheers.

@ericsunsage2880 2 года назад

Do you know If this machine work with hemp filament?

@NexiTech 2 года назад

Hemp filament prints 10C lover then regular PLA. I don't see why any 3D printer can't use it.

@ignaciosalinas2154 6 лет назад

great review , could you share the astronaut model please :D

@NexiTech 6 лет назад

Ignacio Loredo Thanks! Here you go: www.thingiverse.com/thing:2557603 Regards! :)

@ignaciosalinas2154 6 лет назад

thank you very much!

@jeeplvr2000 6 лет назад

What is the bed heater mosfet for?

@NexiTech 6 лет назад

To bypass current and protect motherboard.

@mcrrocksall2 6 лет назад

that was an incredibly thurow review

@NexiTech 6 лет назад

Guys! I made video how to upgrade heat-bead of every model of CR10 3D printers. With this upgrade heat-bed can go to 135C under 4 minutes! Printing ABS is not a problem no more! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IhjqfMHyBAI.html

@kinkong1961 6 лет назад

So why does my creality cr10s prints abs fine i print out to max volume printing boat hulls for my rc models had no shrinkage or bed problems got my bed up to 90 as long as you put a box over it it prints fine in abs and as long as you dont print in a cold garage i use my back bedroom at a temp of 75 so yes you can print abs thats all i use,ive never even tried pla because of its low melting point ans strength issues on my creality cr10s .

@carloscamargo6625 5 лет назад

Hi John, im interested in this Cr10 S. You did'nt do anythign special to make it work with ABS, and you just print ABS out of the box ?? Can you tell me more about your experience ???

@gingerprince2062 6 лет назад

what filaments does this support?

@NexiTech 6 лет назад

Ginger Prince All kind of 1.75mm filament excepted ABS.

@noneNone-mw1px 4 года назад

I want to buy a 3d printer. I need smooth face after printing. What 3d printer do u recommend among all.? Cr10s, cr10s4, s5 ender3 pro or...?

@NexiTech 4 года назад

Cr10 S Pro( now V2) or Cr10 V2 can print parts with nice and smooth surface thanks to the latest motherboard and steper drivers. Of course if you looking for superb print quality then you can go with resin 3D printers like Anycubic Photon(small) or Frozen transform(Big one). ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d2oD4lktOT4.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tsy8jFeqgco.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5YrUQOYLoK0.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qOSzC3-VrJk.html

@noneNone-mw1px 4 года назад

@@NexiTech m thankful for kind and informative answer. Yes I m really looking for super good 3d print. So your suggestion is I go for resin 3d print. I heard ther is CR10 max. Is it true and us it the best? I appreciate your answer

@javierlechuXD 6 лет назад

10:17 OMG¡¡¡

@pwiest2545 5 лет назад

You forgot about one more test! Does the boat swim? :D PS. which material is the strongest (if I print a helmet and drop it) and which one gives the best details? Or maybe there is some material that combines the two qualities, strength and details? CHEERS ^^

@NexiTech 5 лет назад

Pwiest Playing Never tried it until now. Special test just for you. drive.google.com/folderview?id=1RsTGtuvn2FZbATfxUgtBAIv1xgsLj2XA Is the side ways floating counts? :D The strongest filament would be Nylon but it's very hard to print especially a that size as it likes to wrap just like ABS. Easiest to print but still strong and elastic to some sort to survives impact like that would be PETG. I use PETG from Aprinta pro and it's very good. Check Aprinta shop from video description and choose PETG. don't buy PETG with some sort of mix like carbon fiber and similar those added particles just makes filament way less strong compare to based material. Just Get regular PETG instead.

@uivideo7637 2 года назад

What you recommend as a high quality/speed 400x400x400 printer, that can print ABS.

@NexiTech 2 года назад

Chech this video from start to finish. And if you are ready to do some fixes that's the one :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lE9i1-DX1aI.html

@uivideo7637 2 года назад

@@NexiTech Thank you

@NexiTech 2 года назад

No problem :)

@uivideo7637 2 года назад

@@NexiTech I can get the Creality CR-6 Max from a tech shop today. I did not see a review on your channel on this unit. Have you had time to look it over and if so do you recommend, thank you.

@NexiTech 2 года назад

@@uivideo7637 I have reviewed CR6-SE and it was very good 3D printer. No issues at all. It worked perfectly fine so my guess that CR6 Max should preform the same or very similar.

@pooyajandoost 6 лет назад

Hey dude, it could be great to give the main Resources of 3D Models too. thanks.

@NexiTech 6 лет назад

I will include them in video description next time. Thanks for stopping by.

@armandbitton5449 6 лет назад

Please mack with material TPU soft flexible thank you.ARMAND

@swekiller98 6 лет назад

would love to see if the Benchy would float ;)

@NexiTech 6 лет назад

Oliver Österlind Will try! :)

@user-vf6xx7yh7l 5 лет назад

Hey how to buy a 3d printer in Pakistan

@janwiersma1449 6 лет назад

huh? 16:06 cannot print ABS. please explain. in the controller display also was preheat ABS written. (maybe because thats written in al marlin type controllers) but why cant this printer handle ABS? it's got a heated bed. great review btw. thumb-up!

@NexiTech 6 лет назад

It's because it can reach only 61 degrades on heated bed. For ABS you need At least 100 degrades for good prints. ABS is well known for warping issues.

@janwiersma1449 6 лет назад

o oke. thanks for the reply. did not know that yet. i am just a beginner. i have got an anet a6. would it help to use that masking tape. and then attach better on this cr10 or not?

@timo1294 6 лет назад

Jan Wiersma IT works you have to build Isolation trap the Heat .

@KRUSEDK 6 лет назад

I got the CR10 s4 instead of CR10 s3 at the same price, I think they sent the wrong one :P

@NexiTech 6 лет назад

Daniel Søndergård Nice! Even better! Good for you ;)

@_MoRZiLLo50 6 лет назад

Titanic Benchy xD

@NexiTech 6 лет назад

PLAYNIMATIONS :D :D :D

@addk3 6 лет назад

too sweet to be true your presentation. Following your video I bought 4s and I have only troubles so far... 1. at the 4 corners my calibration is perfect, but at the middle not! Hence the glass is bended 2. cr-10 s4 starts printing from its 0 no matter where my model is positioned in cura (yes I have selected "Origin at center") I don't recommend buying this machine for professional work..

@NexiTech 6 лет назад

addk3 Glass can't be bend that easy. It's more luckily aluminium plate that bended/bow in center and then when it's cold/worm during its massive size it varies. Some S4 Heated bad comes like that from factory and some users has reported that. Mine S4 heated bed was OK. Maybe I can help. Solutions: Try to use Vacuum for glass in centre to bend plate up in short pull burst. Or place something in middle (Like paperblock) and then screw down adjusting screws to bend the plate back. Make sure that you heatup plate before doing so. Or If you don't use Max build size all the time you can level it in middle of plate instead of on the corners. Or you can use BRIM option in Cura 2. Origin in center shouldn't be selected.

@gaWalt 6 лет назад

I could really use your help!!! Would you please reply to my comment. I've posted this same comment, on several 3d reviewers, on their youtube page, and none have responded. I'd like to make a decision, in the next 2 days. I wonder, if you think a CR10s is a good choice to print a quality working prototype. I need the prototype to show people that my 3d printed machine works. I'm in hopes that the CR10s is capable of turning out a quality prototype using PLA. How does the CR10s quality compare to an Ultimaker printer? I'm planning on getting an Ultimaker S5 at a later date. Any and all help will be appreciated! Thanks , Gary

@NexiTech 6 лет назад

eGliderman Hi Gary! Would you kindly send me screenshot or picture of that model that you would like to print? Or at least something similar to that? So I could answer you can CR10s print that type of models or not. Send them to my email address I I will be more than happy to answer you. Best regards! Nexi

@gaWalt 6 лет назад

Thanks Nexi. I sent you an email. Regards, Gary

@joparsons20 6 лет назад

Can it do ninjaflex?

@jiangpengfei7137 4 года назад

hi ,bro,can u tell me the 42 motors info

@NexiTech 4 года назад

42 motors?

@jiangpengfei7137 4 года назад

@@NexiTech stepping motor

@jiangpengfei7137 4 года назад

info of all

@NexiTech 4 года назад

@@jiangpengfei7137 I don't have any info. It's just say "steper motor" on it.

@jiangpengfei7137 4 года назад

@@NexiTech ok,tks

@blueremusify 6 лет назад

Hi, I'm a teacher and a sponsor can give us a 3D printer and I must choose between this printer and XYZprinting da Vinci Jr. 1.0 Pro. Please tell me what to do. I'm interested about quality, how difficult is software and community support. Thank you.

@NexiTech 6 лет назад

Remus Dobri I would recommend to go with Creality Cr10S4, da Vinchi Jr. 1.0 pro has not the best feedback from reviewer's. Slicing software is CURA and It's not hard to use but you can use other Slicing software as well. I think you can make all sort of cool project's with this 3D printer for school.

@blueremusify 6 лет назад

Thank you very much for these informations. You have a very intresting channel and I will use it with my students

@2adigital760 6 лет назад

how to purchase cr10 S4 please suggest

@NexiTech 6 лет назад

info A&A You have purchase link in video description.

@AaradhyaKulshrestha 6 лет назад

TPU???

@NexiTech 6 лет назад

Aaradhya Kulshrestha Yes.

@MdRajib-ow7ht Год назад

ভাই এই মেশিন গুলা কিভাবে কাজ কর ভাই এ মেশিন গুলা কিভাবে কাজ করে

@Doom_State 4 года назад

Is it better?

@NexiTech 4 года назад

Doom State Get this one instead! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tsy8jFeqgco.html

@ferivangiorno4730 5 лет назад

Imprime mejor que la cr-10 s o igual ?

@haroldsullivan4316 6 лет назад

" Is it better then CR10S?" that question makes no sense - but Is it better than CR10S?" can be answered, although not by me - I have a CR10 S4 but not a CR10 s, just a CR10...

@f.d.6667 5 лет назад

"when you double the size of the nozzle, you also double the use of filament" ... er, no. Do the math: with A=r^2*pi you quadruple the surface and the use of plastic, depending on the wall thickness of course.

@SH-pc4xt 4 года назад

True, per unit length of extruded filament, if you double nozzle opening from 0.4 to 0.8mm, you will quadruple the volume of filament (same length, 4 x the cross-sectional area). But, as you note you have to consider wall thickness. Plus you have to consider layer height. Nominally layer height doubles, so number of layers is ~halved. So that means overall consumption is probably increased to somewhere between 2-3x.

@siemensohm 6 лет назад

I don't understand why it's so much more expensive than the 10s.

@NexiTech 6 лет назад

siemensohm Because it's bigger. Cr10S has built volume of 300x300x400mm and Cr10 S4 has 400x400x400mm. Maybe on papper its not that much but in real life that's huge difference in print size.

@siemensohm 6 лет назад

Thank you very much for your answer, but that's still no explanation in my eyes. The major parts are the same and a bigger heat bed and shafts etc. can't explain the current price difference of 290€ at gearbest. However, thank you for your informative videos.... :)

@supernaturalswampaids8083 6 лет назад

siemensohm Agree 100%. Seems like they’re extorting a larger sum for such minuscule extra features.

@siemensohm 6 лет назад

+oki doki That's not the point. What's the difference between cr10s and s4 regarding the used components of the printer? Answer that for yourself and ask yourself whether those bigger parts are worth a premium of 50% compared to cr10s...

@swekiller98 6 лет назад

and you get a bigger stepper motor for the y-axis

@macswanton9622 5 лет назад

Brujo

@shnek5143 6 лет назад

I don't understand why 3d printer channels print out objects that are completely useless at enormous sizes.... You could just make something with an actual purpose and it will demonstrate the exact same thing. And also, what do you do with the prints after the video? Just toss them?

@user-dn1db2oe1s 4 года назад

И зачем ты принтер такое кинематики поставил вплотную к стене?! Как ты полноразмерные детали на нём собрался печатать? Он же тебе будет в стену столом стучать постоянно и рабочая поверхность так становится гораздо меньше Попробуй поперёк стола поставить, а блок управления можешь оставить так, либо вынести за пределы стола

@rohansully584 6 лет назад

first?