Programming fob for 2001 to 2007 Toyota Highlander 

Your welcome :)

Thank you! You made my day :)

That’s not correct.

Your welcome :)

Your welcome :)

Your welcome :)

No worries

Thank you :)

Your welcome.

A locksmith can help you out.

As long as the fob says it will work for your year, make, and model, you should be good.

Your welcome :)

Should work.

It will get out of admin mode for you. You should be able to do this without the dealer.

Your welcome :) Glad the video helped you out.

Your welcome

What’s a transponder key?

What year make and model are you working on. Also, double click it, and check all the doors, to see if any others unlocked.

That's a good question. Let us know how it turns out.

tubejim101 haha ok

Your welcome :)

Not the fob used in this video.

Give your local locksmith a call, and ask him how much it will cost to have him do it. Depending on your area, it might not be that expensive.

What year is Highlander?

tubejim101 2006 highlander.

Because you don't have a security light, it sounds like it has been modified. Best bet is to call your local locksmith.

tubejim101 okay. Thank you. The place for the security light is blank only the rear aC heater switch is there. Could it be that the wireless receiver has gone bad?

@@ocheboy I have the exact same car and it didn’t cycle for me either. I have the blank spot where his security light is.

Some auto parts stores have testers. Maybe your luck, and it is your battery.

@@tubejim101 I did have to replace the battery earlier this year, and it didn't seem to effect the fob. I'm thinking that some wiring got waterlogged. It's been weeks since that storm happened, and the fob still isn't working, but the power locks seem to still be functioning properly. I tried doing the reprogramming last night, and the locks never signaled to be ready for programming. I did it twice. Maybe it's a fuse that blew. I'll have to look into that next.

This one should work: amzn.to/2ELr2Jh

adebayo aliu

Here is a list of vehicles: amzn.to/2qBYkza

Is the remote start a factory installed option, from Toyota?

aftermarket, Clifford XR OL some sort of model, it has no signal light on the transponder unit, nor the key chain remote, tried checking their website and cant find my model, key chain also has no valet switch on it,or that i can find on the car, if i press the"*" button 3 times, it cycles through some things and headlights blink 4 times, and it does that 3 times. Actual unit doesn't even say "start" its just a "*" symbol

Not sure. It looks like on the Toyota ones, you press the lock button twice, then hold it for 3 seconds, to start the engine.

thats what i did with the "*" button, ill try it with the lock button, and report, and if that doesnt work?

michael nalepsinki ok so all it did is set the car alarm off, this is blinky

Your welcome :)

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HpsHhNOaDes.html

This key fob: amzn.to/2wyXhrq

@@tubejim101 Dear Friend. I did all the steps in the video, but when setting the switch to the initial operation, the lock does not open and automatic lock .. What is the reason for that? Does not working

If you are not able to program it, you will need to have the dealer, or a locksmith do it for you.

@@tubejim101 Thank you for your response .. Greetings to you

As long as it is for a 2003 Highlander, it should work.

tubejim101 Good to know, also I seen one on amazon for $10 will it work the same as the one sold from Auto zone for $90? It says it is complete with electronic insides, it does not say it is just a case. Thanks again.

That's is all between you and the place you buy from. Here is a nice looking one: amzn.to/2qBYkza

tubejim101 Sorry I may have been wrong on the price, that looks like the one I was looking at on Amazon. If it works for that price I will gladly try it out.

Junk yards theyre like 5 bucks. Just have to google what it looks like/ numbers on the back

Is the alarm after market?

@@tubejim101 I have a 2003 Toyota Highlander it has a hornet 700 T aftermarket immobilizer Alarm horn. I was unable to program my keyless FOB. I was moving through the process. When the door locks were supposed to cycle. They never did. But right then, my immobilizer started alarming. It continued 3 cycles. As soon as I put the key back in the ignition. The 3 cycle immobilizer alarm starts all over again. I was unable to start the vehicle. Something very unique and special happened I had to pull the plug on the hornet immobilizer. I think your procedure process might’ve broke a code in my vehicle OEM Keyless entry module. Do you have any idea where the keyless entry module is located?

To the guy with a 2006. If you have a security system immobilizer. And the security system is activated by locking the door with your wireless key-fob. Would you not expect if the door is somehow mysteriously opened. Lets say from the inside and you pull the handle. would you not expect the alarm and immobilizer system to go off as it’s designed to do?

@@markvermeulen1372 the security system isn’t being activated when i lock the door with the key fob … all the key fob’s doing is unlocking and locking the doors. The security system is activating by itself about 20 seconds after I lock the door. All the programming did for me was get the fob to lock and unlock it did nothing with the security system smartass

@@markvermeulen1372 I do not know where the keyless entry module is located.. A lot of custom stereo shops have a guy who does alarms. I would find a shop, and pay them a few bucks to set you up. For them it is fast and easy.

A locksmith can do it for you. Depending on your area, it might not be that expensive.

You need to get the right type of key fob

Glad it worked. It is tricky. Lots of steps.

Your welcome :)

I

Which model do you have?

@@tubejim101 S

@@jorgecruz5146 Think this one might work for you: amzn.to/3mIq82B

Je suis désolé. Je ne sais pas comment

merci en tout cas

il parait qu'il faut tourner la clé en position on et en position off 5fois c'est que mon anglais est moyen

same what is wrong with our cars bro

@@stevozxl where was the car manufactured? Year and engine number?

@@markvermeulen1372 too late bro i got a whole Altima now

What year, make, and model is your vehicle?

tubejim101 2001 Toyota highlander

@@tiffanyaracena4953 This fob should work: amzn.to/2qBYkza

tubejim101 okay thank you so much!

Your welcome :)

No.

Think you can.

Thank you

Let me know if it works.

No it did not work I think there different

What year is your Camry?

Your welcome :)

Maybe car or remote battery.

I put in new battery already, so what do you mean by”car”?

@@alexle7964 Anytime you have an electrical issue, you should check your car battery. All the local auto parts stores, in my area, will test your battery for free.

@@tubejim101 I put in anew battery and the same thing happen, every 2 weeks or a month I have to come back here and see your instruction all over again. Any ideas?

@@alexle5026 Have your alternator, and battery tested out at your auto parts store.

I did not come up with the steps. Just show them. A locksmith can do it for you. They would not charge very much for this.

Will work for any Toyota compatible fob.

tubejim101 I need to try this on my truck.

Afraid your confusing me with a professional. I'm lucky to even get this far. A locksmith can do it for you, and they used to not cost that much. Not sure what they charge now days.

try ebay

The description has the procedure typed out.

Redo the video as people want to see the steps played out.

Next stop Dealership. Let me know if they charge you.

@@tubejim101 I watched another video and it worked this time! When you do the second set of the key in ignition no turns, only did it once and after completing it went through the cycle

@@lilybeasley5826 Glad you got it working! It is sad how strange they made this procedure. Feels like Microsoft wrote it.

We used to joke: If Microsoft made cars. Now it's not funny.

Worked fine for me, try focusing on the descriptions list, thanks for the video

@@ROCKSONGS1000 where is this mysterious description’s list?

@@markvermeulen1372 in the description of the video

Check the description.