How to fit a Bondtech heatbreak to a Prusa Mini 3d printer, step-by-step, including fitting new nozzle. The upgrade was required as the heat-break was clogging and jamming, causing the extruder to click and grind filament.
Before the upgrade printing below 215 degrees with PLA was impossible. After the upgrade i did a 15 hour print at 205 degrees with no clogs.
Bondtech EXTRUDER video here • Updated Review - IFS B...
If you find this video useful, please like, SUBSCRIBE and share with friends.
I show the process, and the odd mistakes, so you learn from my mistakes.
Once you understand the process, its actually very easy to do.
I used a Slice Engineering 1.5NM torque wrench, with a 3/8 adaptor and 7mm socket fitted.
Mini Sock: shop.levendigdsgn.com/
New 0.4 nozzle was an original from Prusa.
Heat-break from Bondtech.se
[The enclosure from the video is by Tukkari. Model = Tukkari TLX for Mini: Europe - www.Tukkari.com, USA/Global - www.tukkari.store]
#bondtech
#heatbreak
#prusa
#prusamini
12 дек 2021
