Pushing the E-flite A-10 64mm to New Limits

Подписаться 104 тыс.

Просмотров 10 тыс.

50% 1

Want your own? Pick it up via bit.ly/3CwwtrR to help support the channel at no cost to you.
Be sure to check out Hangar 18 Hobbies on social media - and please consider ordering from them now that their website is live! They're a growing local hobby shop and I'm proud to be their demo pilot.
www.hangar18hobbies.com
/ hangar18hobbies
/ hangar18hobbies
/ hangar18hobbies
🙋‍♂️ --------------------------------------------- Social ---------------------------------------------- 🙋‍♂️
If you could, too, consider following me on social as well:
⌛ Tiktok: / jonsynrc
📷 Instagram: / 5ynaesthesia
🙋‍♂️📷: ‪@EscapeLifesGravity‬
📦 -------------------------------------- Things I Fly --------------------------------------------- 📦
Receivers:
Spektrum AR10360T Receiver: tinyurl.com/AR10360T
Spektrum AR8360T Receiver: tinyurl.com/SpektrumAR8360T
Transmitter:
tinyurl.com/IX20Transmitter
Servos:
tinyurl.com/B13DLM
tinyurl.com/B11DLS
tinyurl.com/HS-85MG
Batteries:
4000 6s Smart 50c Packs: tinyurl.com/Smart6s4000-50c
6000 6s Zeee 100c Packs: tinyurl.com/6sZeee6000-100C
5200 6s Zeee 100c Packs: tinyurl.com/6sZeee5200-100c
5200 6s Zeee 50c Packs: tinyurl.com/6sZeee5200-50c
Thanks for watching guys. See you again soon.
Music: Swish by Patricia Taxxon from the album Aeroplane: • Patricia Taxxon - Aero...
#radiocontrol #flight #rcplane
0:00 Introduction \ AR637T \ CG Adjustment
2:45 Ordnance Takeoff
3:05 Snap Roll \ Slow Flap Pass
3:55 Flap-based Gyro \ Missed T&G
5:00 Touch & Go \ Tumbling \ Knife Edge
5:40 Location Change \ Touch & Go \ Tumbling \ Stall Turn
6:45 Flat Spin \ Low Knife Edge
7:40 Turbulent Landing \ Post-flight
8:46 Pre-flight
9:35 Takeoff \ Tumbling
10:15 Inverted Flat Spin Attempt \ Slow Flap Pass
11:00 Inverted Alpha Tests
12:05 Getting Inverted Alpha Down
12:51 Snap Rolls
13:45 Knife Edge \ Landing \ Post-flight
15:48 Preflight \ Takeoff
16:21 Dialing In Inverted Alpha
18:44 Knife Edge Stall \ Tumbling \ Slow Flap Pass
19:55 Slow Flap Pass
20:20 Knife Edge to Snap Tumble \ Landing
hoizon hobby products, horizon hobby, eflite, A-10, a-10, a-10 warthog, a-10 thunderbolt, a10 warthog, a10 thunderbolt, thunderbolt, warthog, 64mm EDF jet, EDF jet, spektrum, IX20SE, ix20, radio control, eflite a10 Pushing a Foam A-10 to Its Limits (E-flite A-10 64mm v2 RC Plane)

Развлечения

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@davidhutchins7925 2 года назад

Ok, so I have the Eflite A-10, and have had trouble landing, with porpoising. I really struggled with that until I watched this video. Turns out that like you said, moving the battery aft made all the difference! Now, grease jobs consistently! Landing is great now, she just floats in with a little power! Thanks and Peace from California!

@TwoBrosRC 2 года назад

Crow helps too, but proper CG makes all the difference.

@delfin2003 Год назад

One of the coolest reviews I've seen. Thanks

@johanopperman8039 2 года назад

Awesome flying and camera work thanks Jon and Tony. Your landings are so good Jon. Wonder if got to fly with your friend in the real plane on Sunday. Thanks for always sharing your knowledge with us

@TwoBrosRC 2 года назад

Thanks Johan! Unfortunately I did not, it was sort of an impromptu plan. I'll get up there eventually.

@bingus6854 2 года назад

Great flying and excellent camera work as per usual! Looks like a very wind resistant plane considering its size.

@TwoBrosRC 2 года назад

Thanks man!

@chrisdavis3642 6 месяцев назад

Ok you just answered my question on the 4000 -4 cell. Thanks.Goin up tomorrow!

@TwoBrosRC 6 месяцев назад

Glad we could help!

@reckemroysrc3764 2 года назад

Nice flying Jon 👍

@TwoBrosRC 2 года назад

Thanks man!

@bigg_survivor_8876 2 года назад

Wow! I love that plan. I am trying to fly a beginner jet to get prepared for the a10.

@TwoBrosRC 2 года назад

Honestly I think you'd be OK moving up to this jet from a Habu. It's not hard to fly at all. Even landing is pretty easy.

@bigg_survivor_8876 2 года назад

@@TwoBrosRC thanks for the advice! I am only worried about the turning radius because I fly in a park with limited space.

@TwoBrosRC 2 года назад

Give the jet max possible throws and dampen with lots of expo - 50% or more. You'll have plenty of agility.

@A.M.-RC 2 года назад

@BIGG_SURVIVOR_88 I can recommend the UMX A-10 for learning, I'm nowhere near as good as Jon but the UMX gave me some courage to try bigger jets. I have some videos on my channel of it, really awesome plane.

@bigg_survivor_8876 2 года назад

@@A.M.-RC that’s what I just got ,but don’t have a charge adapter for a 6s battery yet they are all on back order.

@stfuliberal 3 месяца назад

"I'm excited about this model. I just picked her up today."

@zeldacohen9140 2 года назад

Hi Jon. Great video. Assuming you have the battery as far back as it will go, are you adverse to adding a small amount of weight to the tail in order to get the CG where you want it? Thanks

@TwoBrosRC 2 года назад

I've added a lot of weight to many models to get them to balance better, but it's always a game of figuring out how far back I want it to balance versus how much weight it'll take to get it to do so. Too much weight adds more wing loading and reduces the thrust to weight ratio.

@looneytunes47 2 года назад

Crow is an awesome thing for high energy flying swept wing jets when coming in to land on a short air strip but i never use it on any of my other prop planes or straight wing jets.

@TwoBrosRC 2 года назад

It works great on props too. Some models really benefit from it to get stable harriers. The EC-1500 comes to mind, as does the Extra 300 from E-flite.

@looneytunes47 2 года назад

@@TwoBrosRC Oh yeah i once saw a youtube video of a guy flying the EC-1500 on floats over the water doing amazing Harriers for like 10 minutes! Maybe that was You???

@TwoBrosRC 2 года назад

@@looneytunes47 Maybe 🤣

@ricardopr54 2 года назад

Awesome flying demonstration! 👍🏾😁 Can you do the same with the Freewing 80mm A-10? I would love to see that!...😊👍🏾 By the way, I saw another of your videos in which you gave us a short tour of your hangar. Can you do a short video tutorial on how you hang those aircraft to your roof! I would like to do that on my house, but I need some guidance, specially on what hardware I need like the laptop straps, which one specifically you got...I would really appreciate your help on that matter!... Have a great day! I'm glad I found your channel and subscribed to it!... You are a good pilot!...By the way I have that same IX20SE radio, and I love it!... Greetings from Douglas, Arizona 👍🏾 🌵 🦠 😷 🇵🇷 Like#22

@TwoBrosRC 2 года назад

Hey man! I don't have the Freewing 80mm but you're welcome to contribute to it if you'd like to donate to the channel via the Thanks button or via the PayPal link. It's an expensive jet. I'd like to get it at some point. Hanging the models just requires drilling into a stud in the ceiling and using a heavy hook that you attach laptop straps to, preferably straps with hooks. No tutorial needed!

@ricardopr54 2 года назад

@@TwoBrosRC Thanks for your response to my question!... About that freewing A-10, I thought that you have one already since I saw two A10s hanging on your roof and one of them looks like the bigger Freewing model I was talking about...🤭You have a nice hangar arrangement in that room...Awesome and clean!... My hangar looks like one of those hoarders shows, 🤦🏾‍♂️😅😅But I'm looking for a way to organize it and liked the way you did yours!... 👍🏾😊 Here's a video of me flying my Freewing A-10 Thunderbolt 80mm jet...The video has timestamps so you can fast forward it to the A10 flight and landing...No need to watch the entire thing...I'm not as good of a pilot as you are, "I wish some day to be", but I love this hobby as much as you do😊 ... My flight is the second one on this video...I hope that you like it 🤞🏾👍🏾😊 Watch "HSDJet Super Viper Maiden Flight and Freewing A-10 Feb 2022" on RU-vid ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WTMp92_mMPw.html Have a great rest of your day! Greetings from Douglas, Arizona 👍🏾👍🏾👍🏾🌵🦠😷🇵🇷

@TwoBrosRC 2 года назад

Nah, that's the FMS 70mm. It's big but not as big as the FW 80mm. I'll check your vid out. Thanks for watching!

@ricardopr54 2 года назад

@@TwoBrosRC Awesome 👌 Have a great day! 👍🏾

@domscorpi9775 9 месяцев назад

i have many difficulties with this plane. specially to land.... i have already 10 crash and i have broken so much nose gears........

@sidneyvanzandt2473 10 месяцев назад

Hello there. Question, have you beefed up your nose gear on this A-10?? Because, I have one of these jets. I came in for a landing one day and the nose gear snapped right off. I didn’t think that I hit hard at all. And I am not running over grass piles like you are on your runway. Maybe I just had a defective nose wheel or something. I really don’t know. Awesome flying, and how did you set up the reverse on this plane. That was neat.

@TwoBrosRC 10 месяцев назад

Nope, no mods to the gear at all. Are you on V1 or V2? V2 fixed most gear issues that we'd heard of.

@sidneyvanzandt2473 10 месяцев назад

@@TwoBrosRC not sure which one that I have. I had to buy another nose gear though. Hopefully this gear is better than the last one though. Lol. The first one snapped the gear off nearest to the plane just for fyi. I haven’t been able to fly it since I replaced the gear though. I can’t wait to fly it again, just to see if the gear is better.

@robieosborne7369 2 года назад

Ahhhh so that's what crow is!!!!

@TwoBrosRC 2 года назад

I've talked about it before but sometimes it helps to physically demonstrate.

@Tantrum791 2 года назад

Great video, I’d like to see the twin 70mm if you have it!

@TwoBrosRC 2 года назад

I do, actually. I'll be shooting it this week!

@Tantrum791 2 года назад

Sweet! I’m new to flying (about 11 months) and rely on safe to have successful flights but I keep thinking about picking the twin 70 up. I have several other planes but jets are really what excite me!

@TwoBrosRC 2 года назад

Jets really are exciting, you're definitely right about that. You'll get to a point where you feel confident flying them and then a whole world of flying adventures will open up to you.

@RC-planes. 2 года назад

I heard that some one was say that you move your (tx Sticks) to much ,but I think your hands are like a gyro ,or even better, for a example I bought a £20 gyro ,for windy day but I'm not using it, to much weight and not enough space, btw your a really good pilot 👍👍

@TwoBrosRC 2 года назад

Expo is all personal preference. Way too many people think that their personal technique is everyone else's official procedure.

@RC-planes. 2 года назад

@@TwoBrosRC mhm , yes

@calvinpeterson3203 5 месяцев назад

Will a dx6e work with bnf v2 version i may have to disable safe to have retracts flaps and reverse thrust. Can i not use reverse thrust and use safe instead

@TwoBrosRC 5 месяцев назад

It should work, but you won't have receiver flight modes (SAFE/AS3X toggling)

@calvinpeterson3203 5 месяцев назад

@TwoBrosRC thx

@EDF_FANatic Год назад

Jon do you need more than 6 channel receiver for crow ? Also how did you do the flat spin on this bird? That was awesome. What are the stick inputs like to pull that off ?

@TwoBrosRC Год назад

You need a minimum of seven channels for crow. Flat spins are performed by holding up elevator and adding rudder with contrary aileron.

@RCpilot1013 Год назад

I just assembled mine for the first time and noticed it doesn’t have much elevator movement. Although I’ve yet to maiden it. Is it safe to increase the stock servo travel to 150% for extra travel? Thanks

@TwoBrosRC Год назад

You'd have to reprogram the receiver after you unlock it, otherwise you won't be able to hit 150%. 100% would be the stock travel limit. You can reposition the pushrods for the elevators by moving them to the outermost hole on the servo arm. That should free up some travel - but not as much as doing that with 150% rates.

@RCpilot1013 Год назад

@@TwoBrosRC I’ll reposition the control arm and ad some expo. Thanks for the quick reply!

@Donkey_Balls 2 года назад

🙋

@M4rkmcc21 2 года назад

Jon what's stopping that lipo sliding forward?

@TwoBrosRC 2 года назад

Nothing really except the Craftsman shelf liner. It doesn't move at all, thankfully.

@sotheamam1244 9 месяцев назад

Nice flying, can it be fly with a normal batteries

@TwoBrosRC 9 месяцев назад

Normal batteries?

@hifisalty25 5 месяцев назад

What do you mean Alta and crow

@TwoBrosRC 5 месяцев назад

Google "high alpha" if you're curious. Googling "crow wing configuration" will also give you some useful info.

@TheSkinon 11 месяцев назад

Do you still fly this? I picjed one up and love it, but tryin put my 4000 6s in (they fit) but cg is like 54mm, you were saying they fly well with the aft cg do you think this is too much? I normally fly it around 62mm...

@TwoBrosRC 11 месяцев назад

Haven't flown it since January.