Тёмный

Radio Sticks Don’t Match Up In Betaflight? 

Datfpv
Подписаться 10 тыс.
Просмотров 22 тыс.
50% 1

MY RADIO RECEIVER IS FU*KED UP!?*
Support DATfpv for all his hard work:
www.buymeacoffee.com/datfpv
www.paypal.com/donate?hosted_...
paypal.me/datfpv
instagram: / datfpv
facebook: / datfpv
twitter: / datfpv
Join my Channel: / @datfpv
This will show you how to fix your radio controller in betaflight when it looks like your control sticks don't match up.
This will probably help out fpv beginner set ups.
TBS Tango 2
Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we're back with one of the most popular requests: a compact full-size remote! The TBS Mambo follows in the footsteps, but focuses on all of the things the Tango 2 tries not to have: a larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons!
TBS Tracer
The TBS Tracer (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of latency and performance without any of the clutter of choosing RF modes, link profiles. It just works. Two-way communications includes telemetry functionality and support for 3rd party autopilots.
DJI FPV Goggles
The DJI FPV Goggles V2 with DJI O3 image transmission features high definition, low latency, long-distance transmission, and strong anti-interference capabilities. The DJI FPV Goggles Battery in the box supports up to 110 minutes of flight when fully charged. High definition, low latency, long-distance transmission, and strong anti-interference. Battery in the box supports 110 minutes of flight when fully charged.
FPV
FPV, has revolutionized the radio control hobby. By definition, it is a method used to control an unmanned aerial vehicle (UAV) or radio-controlled vehicle from the driver or pilot's perspective. ... A live FPV system makes precise aerial photography and videography possible.#TBS #TBSmambo #TBStango2 #fpv #derbyfpv #impulseRC
Betaflight
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support.
Flight Controller (FC)
A flight controller (FC) is a small circuit board of varying complexity. Its function is to direct the RPM of each motor in response to input. A command from the pilot for the multi-rotor to move forward is fed into the flight controller, which determines how to manipulate the motors accordingly.
Radio Transmitter
The common frequencies used in FPV drones are 2.4GHz and 900Mhz. 2.4GHz is the standard nowadays for radio control thanks to its frequency hopping technology, which manages channel automatically to avoid interference between pilots. 900MHz is another popular frequency mostly used in long range flying.
FPV Analog Goggles
The term analog FPV refers to Analog video transmission technology and systems. ... The FPV camera signal is passed through to the VTx. The VTx have a carrier frequency (carrier frequency are frequencies that help the weak FPV camera signal to travel over long distances), the most commonly used carrier frequency is 5.8GHz.
ImpulseRC Apex 5″ Quadcopter Frame
Through a process of continous refinement and always striving to improve we have created a new breed of freestyle frame. The Apex does not compromise in stiffness or durability, so you never have to choose between confidence and performance. Unique design elements new to the FPV world make your build and maintenance more simple than ever before. Toughness of the frame itself is increased while also offering much better protection for your investment in flight electronics.
ImpulseRC Micro Apex
The Micro Apex incorporates all of the unique innovations pioneered by ImpulseRC and now widely imitated. From the compressed-X arm geometry, integrated camera tilt, front box-section and split main plate design, to our custom shoulder bolts and arm locking key. At the centre of mass where the arms meet there is a massive 8mm of carbon fibre, taking the stiffness of a micro frame to a new dimension so you can enjoy unsurpassed flight characteristics at this prop size.
Help and Support DATfpv:
/ datfpv

Опубликовано:

 

20 авг 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 214   
@konradsouser9726
@konradsouser9726 2 года назад
DUDE YOU HAVE NO CLUE HOW HELPFUL THIS IS
@gargolaconrad3188
@gargolaconrad3188 2 года назад
Thank You again!!! My Roll and Yaw was switched around, and your video helped me. I switched the letters on the right to be the same as the ones on the left, but it changed them all around to the wrong positions, so I put it back and just switched the Roll and the Yaw on the right, and now it's perfect. Thank You again , for showing how to do everything in detail, to help us new guys out. A lot of the other peoples tutorials, just say this button is for this, and this is for this, but they don't show you how to actually adjust everything to work. Thank You so much
@Datfpv
@Datfpv 2 года назад
thanks man, good to know I do help you guys out.
@pickens771
@pickens771 3 года назад
Thank you. I’m in tears 😭 right now. Thank you 🙏🏾
@Datfpv
@Datfpv 3 года назад
You are so welcome, tears of joy I hope! smash that subscribe! thanks
@lgabrielle07
@lgabrielle07 2 года назад
First I want to say much much love to you SIR!! I am super new to the FPV scene and you have answered all the questions I've have so far. I love the way you present things so easily and clearly. Keep it up my friend!!
@Datfpv
@Datfpv 2 года назад
Glad to help, thanks, remember to subscribe!
@roguereality3646
@roguereality3646 2 года назад
You are legitimately the only reason my freestyle 2 is flying right now from bind to this remapping tip thank you for helping this newbie out
@StompyFPV
@StompyFPV 2 года назад
I was about to shit can everything by betafpv until you cleared this up, the fpv world is hard enough to jump into without this mess. Thank you!
@taylanator2000
@taylanator2000 2 года назад
Thank you, got my tinyhawk II freestyle and it was all mixed up as you showed here, did your trick and it's all working. Thanks!
@Datfpv
@Datfpv 2 года назад
Great to hear! glad you sorted it!
@uaddi_xx
@uaddi_xx 2 года назад
OOOOOOOH! I'm sure you came to earth - to save us all. Just ... thank you so much !!! I've been thinking about this problem for a week! And he fixed everything in 5 minutes.
@Datfpv
@Datfpv 2 года назад
nice one mate glad it all helped, remember to subscribe! thanks
@wmcewa01
@wmcewa01 3 года назад
This video savvvvved me! I was so disappointed when like quad wasn't working, and then I found this video. A perfect fix.
@Datfpv
@Datfpv 3 года назад
Hey - Glad it helped! - remember to hit the subscribe! thanks
@vntgelvr13
@vntgelvr13 3 года назад
Bro! Just want to give you a Big MAHALOZ from Hawaii!! I was going nuts until I watched your video on this twice. All working as it should be now! Thank you Braddah and Alooooha!
@Datfpv
@Datfpv 3 года назад
glad it helped you out mate, happy flying remember to subscribe thanks
@ZakirNaroth
@ZakirNaroth Год назад
Hey bro. Just moved over to crossfire and I ALMOST broke my quad after just having it built!!! Did so much of research only to have randomly stumbled upon this video. Thanks so much. You saved my life !!
@kcschwartz3284
@kcschwartz3284 2 года назад
Thanks for making this vid! It solved my issue. Much appreciated
@madness5327
@madness5327 3 года назад
Your video really helped ,precise and informative. Subscribed and I hope your channel grows fast.
@Datfpv
@Datfpv 3 года назад
glad they helped and thanks for the sub!
@markwalhimer8972
@markwalhimer8972 2 года назад
Wow ! Thank you ! I spent two hours trying to figure that out ! Thank you !
@Datfpv
@Datfpv 2 года назад
Glad it helped!
@Pugg
@Pugg 2 года назад
Thank you for this. Great little vid. Keep up the good work.
@Datfpv
@Datfpv 2 года назад
Thanks, will do!
@sam-vk7jc
@sam-vk7jc 2 года назад
THANK YOU SO MUCH. i am really new to FPV and got my first quad and it was happening to me too thank you so much
@turboromy
@turboromy 2 года назад
Thank you! This is first time I experienced this mix up. I knew it is doable to remap channels.... but never knew I could simply type it in. I've been looking for "where" to do this from other than receiver tab.
@Datfpv
@Datfpv 2 года назад
Glad it helped! hit that subscribe! thanks
@JonWheeler84
@JonWheeler84 2 года назад
You’re a god send sir. For once I did everything else in order and correctly, but this was the new learning curve and you have saved us all!!! Lol
@Datfpv
@Datfpv 2 года назад
Glad I could help! smash that subscribe!
@jeremydeihl
@jeremydeihl 2 года назад
Just found your channel today and this video alone got you a new sub! great stuff and thanks!
@Datfpv
@Datfpv 2 года назад
Awesome, thank you!
@tomiventures
@tomiventures 3 года назад
Lots of thanks. I was able to follow both videos and bind betafpv transmitter with the tinihawk 2 racing. Keep putting out videos. Big Help!🙏
@Datfpv
@Datfpv 3 года назад
Glad I could help! remember to subscribe, thanks
@ravensmere1
@ravensmere1 2 года назад
I've been trying to figure this out for WAY TOO LONG. Thank you for making this easy. Just flew it into a fish tank after the first 2 minutes hahaha
@Datfpv
@Datfpv 2 года назад
Glad it helped! no worries!
@metatronscube2037
@metatronscube2037 Год назад
Lol by far the best comment in this thread
@ROVERLORDD_
@ROVERLORDD_ 2 года назад
Hero of the day, thanks SO MUCH !!!! c:
@doodgeslagenmug
@doodgeslagenmug Год назад
Thanks a million! Saved me from messing around endlessly!
@jackmasterson8352
@jackmasterson8352 3 месяца назад
you are the Don of FPV tutorials thanks so much mate!
@Datfpv
@Datfpv 2 месяца назад
thank little padawan
@robjanicebacon9571
@robjanicebacon9571 2 года назад
THANK YOU! I have the most recent literadio 2 SE with usb C charging. BETAflight doesn't seem to work with it. I used BETAFPV Configurator to reorder the channels and I'm back in business.
@deathbyautopsy8660
@deathbyautopsy8660 2 месяца назад
This video saved my life. Thank you so much. I thought I was going mad! A thousand likes and a subscribe😊
@Datfpv
@Datfpv 2 месяца назад
cool - thanks
@pablofpv_br
@pablofpv_br 3 месяца назад
Thank you friend, I had exactly this problem, your video is very good, hugs Pablo Toledo FPV Brasil
@Datfpv
@Datfpv 2 месяца назад
Glad it helped
@genericfpv
@genericfpv 2 года назад
your videos are really helpful thank you!
@Datfpv
@Datfpv 2 года назад
thanks mate!
@penningtongrading5019
@penningtongrading5019 Год назад
great help and easy to find
@Datfpv
@Datfpv Год назад
no worries
@Thomas_1979
@Thomas_1979 Год назад
Thank you for your help mate
@musich13
@musich13 2 года назад
Thanks a ton for this, huge help.
@Datfpv
@Datfpv 2 года назад
Glad it helped!
@thomasgawley1013
@thomasgawley1013 2 года назад
I love you 😭😭 This took to long
@Datfpv
@Datfpv 2 года назад
glad it helped you out
@roblogic3660
@roblogic3660 3 года назад
I thought I fucked something up (I’m good at it) god bless you sir!!! Bout to have an enjoyable afternoon of flying🤝🤘😀
@aidenkringenart
@aidenkringenart Месяц назад
Thank you so much!
@kumardeepam
@kumardeepam 3 месяца назад
Very helpful mate!
@Datfpv
@Datfpv 2 месяца назад
Glad to hear it!
@RobWhitworthProductions
@RobWhitworthProductions 3 года назад
Thanks - super useful
@Datfpv
@Datfpv 3 года назад
Glad it was helpful!
@christinababcock305
@christinababcock305 Месяц назад
Thank you. Found this video after 4 hours of research and screwing with the controller
@JamesBerry1111
@JamesBerry1111 2 года назад
Thank you soo much!
@bamcameback
@bamcameback Год назад
You're a legend m8
@rafaelgil1542
@rafaelgil1542 2 года назад
THANK YOU SO MUCH! LEGEND!
@Datfpv
@Datfpv 2 года назад
no worries! glad it helped.
@jonboy6750
@jonboy6750 3 года назад
Wow thanks 🙏 worked perfect 🤩
@Datfpv
@Datfpv 3 года назад
You're welcome! glad it helped
@multixz3010
@multixz3010 4 месяца назад
Thx dude you just helped me
@rezysospiritual7704
@rezysospiritual7704 2 года назад
Thank you so much this is the most helpful video ever
@Datfpv
@Datfpv 2 года назад
Glad it helped! hit that subscribe! thanks
@yzs4life
@yzs4life 3 года назад
Thanks for posting I haven’t touched my radio or quads in months after getting frustrated, going to try this out tomorrow, I also have a question if anyone has had any issues with foxeer cameras and their vtx I get a lot of feed back, and the light on the smoke stopper came on, I’m almost done with a 5” build
@Datfpv
@Datfpv 3 года назад
hey - I like foxeer cams, never really had an issue with them, check your soldering, wires etc and do you have a capacitor to take away some of the spikes?
@yzs4life
@yzs4life 3 года назад
@@Datfpv thanks for the reply! I do have a 35v capacitor, running a 14.8v 4s battery, I think I’m going to try powering it off of the vtx instead of the flight controller next, also for the THF2 I was able to unarm the quad once I changed the stick lay out but it would go full throttle as soon as I barely touched it, I mistakenly reset the settings to default and haven’t been able to move on from that lol
@mrmical7
@mrmical7 2 года назад
DUDE THANK YOU SO MUCH
@Datfpv
@Datfpv 2 года назад
No problem
@DependentC
@DependentC 3 года назад
So simple... So awesome!! THANK YOU!!!!
@Datfpv
@Datfpv 3 года назад
Glad it helped! remember to subscribe! thanks
@garsei4347
@garsei4347 2 года назад
thanks a lot man, my mental health was endangered after seeing how my drone was completely crazy hahahaaha
@Datfpv
@Datfpv 2 года назад
glad it helped!
@lemonamnesia8561
@lemonamnesia8561 3 года назад
ur my Hero of the day
@Datfpv
@Datfpv 3 года назад
glad it helped, remember to subscribe! thanks
@monkeytrousers7909
@monkeytrousers7909 2 года назад
Thanks so much!
@Datfpv
@Datfpv 2 года назад
You're welcome!
@benfpv7349
@benfpv7349 3 года назад
THANK YOU SOOOOOO MUCH. your an actual god and now ima go fly bye
@Datfpv
@Datfpv 3 года назад
you're welcome my man! welcome.. now fly.. go fly lol.
@barry_dalive
@barry_dalive Год назад
bro! Thanks so much! I thought it had something to do with the order of the letters but I'm so green to betaflight I didn't want to fuck anything up
@Datfpv
@Datfpv Год назад
Glad it helped! no worreies!
@Ok-nm6nm
@Ok-nm6nm 2 года назад
Thank you so much i love you!!!
@Datfpv
@Datfpv 2 года назад
Glad it helped! hit that subscribe! thanks
@sheapyfpv8224
@sheapyfpv8224 3 года назад
Thanks man
@fengaming2679
@fengaming2679 Год назад
Thank you
@heleomopi
@heleomopi Год назад
NICE. my receiver and control connecting but none responsive in Betaflight. any tips for that? cheers
@RandyCooper85
@RandyCooper85 2 года назад
So simple. Ive been pulling my hair out. My only other problem is my throttle locks on even when i turn it back down.
@johnkurpiewski3996
@johnkurpiewski3996 Год назад
Perfect 👍
@MrImperativeoz
@MrImperativeoz 3 года назад
You are a beta flight GOD!!!!! Thank you!!!! Def subscribe
@Datfpv
@Datfpv 3 года назад
Glad I could help
@brad33fpv43
@brad33fpv43 3 года назад
How do you sort that out if you have a beta flight1S meteor 75 mm from the advanced kit 2 that doesn’t have the option to plug in usb?? I’ve had mine for a couple of months now and have had no nothing but trouble with it.. The start up tune has gone really quiet now you can hardly even hear it when I plug a battery in ????every time I go to fly it to be something different wrong with it is it controls are back to front half of them don’t even work at all or manage to bind it hit the arm switch get it up off the ground to about shoulder height and then it would just go spastic full pelt into the wall the floor or the ceiling or wherever doing flips and re-flat out until you disarm next time it wouldn’t arm at all then the next time you would arm and then it just goes spastic straight away. couple of days ago I was watching a RU-vid video and found out that it is supposed to be in D8 mode and there was two other dee 16 modes that are apparently only for overseas or something so I manage to get it into D8 mode today with the props of checked all the controls were all working perfectly and thought awesome I finally fix this little thing and I can actually fly it now so I put the props on plugged the battery in and got it up off the ground and a couple seconds later dropped to the ground floor and faintly heard to start at tone and it just cut out I am do it again and to get it off the ground wouldn’t get off the ground and stopped and heard the start of June again so I have no idea what’s going on with it and I’ve just about given up as I am just new to this SPV after 40 years of racing motorcycles I’m hooked on it already but just wish I could have something that Will function properly so I can learn how to fly FPV I have a few bigger quads my first build is a rebel yeti 8 inch I have a source one V35 inch I have two bolter see kraken‘s boat 5 inch I have another source one V3 with 7 inch arms I have a Mr steel impulse RC apex 5 inch I’ve got The beta fpv X night 4 inch and I’ve got The beta fpv 3 inch twig racing quad and none of them have been flown yet because I can’t seem to get this little thing sorted so I can learn to fly before I go anywhere near any of these other ones as I’m quite certain that they will not be in the same condition in approximately 10 to 30 seconds after me arming it LOL sorry for the long text but I don’t normally like asking for help but FPV is a new journey for me in life after racing motorcycles and it has pretty much save my life and I have quickly become hooked on everything about it the community seem like an awesome group of people and I can’t wait to learn more and actually be able to get one of these things up in the air and experience what I think would be the best thing I’m ever gonna experience what you guys do any suggestions or help would be greatly appreciated thanks 🙏
@Datfpv
@Datfpv 3 года назад
Hi! sounds like you are having a complete nightmare! the meteor MUST have a plug for usb... must I don't believe they take the usb connection off it at all - I do have a contact at betaFPV!... This is one of those that I would really have to see what is actually going on, I'd need to see the quad, how its working etc. what about the place you purchased it from? can they help you out? if not, my email is on my youtube channel, drop me a email but I will need some videos of whats happening to be able to help at all.
@glytch5
@glytch5 2 года назад
What happens when you bind up a new betafpv express LRS receiver, and your receiver tab has a TON of delay... and some of your inputs are moving around? Using a literadio 3 with a nano module and i'm bound... but man there is something weird going on and I'm not sure what could cause this.
@pmc5532
@pmc5532 3 года назад
This was me for the last 3 days, jumper t lite and nanohawk, still won't arm ? sticks wrong, but it does bind . help!!
@growpanda7379
@growpanda7379 2 года назад
Thank you.
@Datfpv
@Datfpv 2 года назад
You're welcome! hit that subscribe!
@entertainmentunlimited3256
@entertainmentunlimited3256 2 года назад
Hi. I got a new brushed drone and it has futaba receiver in it. My radio sticks shows reverse in betaflight. I mean if I move the sticks upward, its shows down on betaflight and if I move the sticks left it shows full on betaflight. How to correct it. Radio is jumper t lite
@jakelang4387
@jakelang4387 3 года назад
Thanks man .
@Datfpv
@Datfpv 3 года назад
No problem!
@papajoe4750
@papajoe4750 3 года назад
Thank you VERY MUCH 🙏🏾
@Datfpv
@Datfpv 3 года назад
No problem 😊 hope it helped, thanks, do subscribe if you haven't already!
@papajoe4750
@papajoe4750 3 года назад
@@Datfpv Yes it helped and I subscribed. Thank you and have a nice weekend 😊
@gcdevicegc6103
@gcdevicegc6103 Год назад
Hi! Not the best solution, as I have 3 radio and only the one got this issue... so where in the radio settings we can change it? I need all 3 can be used with all my quads
@ItzAndrii
@ItzAndrii Месяц назад
thank you
@rcsbyrich3035
@rcsbyrich3035 2 года назад
Amazing thankyou
@Datfpv
@Datfpv 2 года назад
You’re welcome 😊 do subscribe! thanks
@ymatuhin
@ymatuhin Год назад
God bless you
@ImpurePlanet
@ImpurePlanet 2 года назад
Thank You Thank You Thank You!!!!
@Datfpv
@Datfpv 2 года назад
You are so welcome! hit that subscribe!
@ChapinPro
@ChapinPro 3 года назад
YOU´RE AWESOME MEN....
@Datfpv
@Datfpv 3 года назад
thanks! take it that vid helped.
@urbexdrone9143
@urbexdrone9143 2 года назад
Thank you 👌😕
@Datfpv
@Datfpv 2 года назад
You're welcome 😊 hope it all helped you out! do sub!!!
@johnwalter6410
@johnwalter6410 3 месяца назад
SMASHING
@deandagner
@deandagner Год назад
Dude, thank you haha
@Datfpv
@Datfpv Год назад
No problem!
@christopherroyquincey9553
@christopherroyquincey9553 10 месяцев назад
Dude dude thanks. Wow
@pierangelobertaina1282
@pierangelobertaina1282 2 года назад
Merci beaucoup 👏👏👏👏🙏
@Datfpv
@Datfpv 2 года назад
you're welcome! thanks
@glens1800
@glens1800 2 года назад
My controller is binded to my drone it all works in beta flight but it just won’t work. I have no clue what’s happening here. Do you please have any advice
@TheHuseinbasic
@TheHuseinbasic 2 года назад
TNX
@Datfpv
@Datfpv 2 года назад
no worries!
@davidgann3251
@davidgann3251 3 года назад
Wish I had seen this two days ago before I returned my controller via Amazon for sending the wrong controller. Also couldn't get it to arm.
@Datfpv
@Datfpv 3 года назад
this would of sorted you out mate, it would of also been the reason it wouldn't arm!
@spikex41
@spikex41 2 года назад
How do you know what letter to put where thow?
@ItzAndrii
@ItzAndrii Месяц назад
holy crap this just saved me
@dzzz7475
@dzzz7475 Год назад
thankssss alotttt
@Vojtechkoska
@Vojtechkoska 2 года назад
Hi nice video👍🏼👍🏼 I have one problem in betaflight it’s similar to this one and I have no idea what is the problem if you can suggest something thank you 🙏🏼…. So the situation is like this my RC and drone are bonded but when I go to the betaflight in (receiver) and I check the Preview of the quad it’s not moving i don know what to do here Quad: iflight Nazgul Evoque RC: TBS Tango 2
@Datfpv
@Datfpv 2 года назад
hey - it will either be: the UART for the receiver hasn't been turned on in PORTS, or in the CONFIGURATION you need to change the receiver to CRSF - one of those should sort you out.
@Vojtechkoska
@Vojtechkoska 2 года назад
@@Datfpv Sorry I’m new in fpv how should I know with UART should I use
@Vojtechkoska
@Vojtechkoska 2 года назад
@@Datfpv fixed thanks 🙏🏼
@alessiopulvino4672
@alessiopulvino4672 2 года назад
I have the same problem,but i fixed it in the opposite way,using the Letters that are not working for you. I also see the motors going crazy,when i test then without props. Any suggestions? I just bought a Nazgul Evoque but in the test without props the motor are running at crazy speed :(
@Datfpv
@Datfpv 2 года назад
Motors without props on do go crazy 😜 fact! There is nothing wrong with the motors they are fine it’s just something that happens without props on
@tkaisavage3265
@tkaisavage3265 Год назад
Mine is the oppiste when its AERT1234 it spins but when it TREA1234 its fine but im still having issues my drone is arming and propellers are moving but it just flips over and then beeps
@Frumundaair
@Frumundaair 7 месяцев назад
How do yiu change switch functions
@BongToker
@BongToker 3 года назад
OK I have it blinded to the tinyhawk II And I have the AETR1234 In the right spot everything seems to be working throttle yaw pitch and roll But since it does not have any trim buttons everything is not 1500 except the throttle of course the throttle is in the proper spot How can I fix that
@Datfpv
@Datfpv 3 года назад
Hi! no trim there is a complex way through tx companion which honestly I wouldn't recommend doing it... does it fly ok? is the 3d pic in betaflight spining / moving ? or is it ok - my own isn't on 1500 perfectly.. not even my tango 2 is spot on... you can add some deadband in the receiver tab if needed that should help if needed.
@mathew-jq2vf
@mathew-jq2vf Год назад
thank you so much you made this easy for me whoohoooo im air bourn
@365rc3
@365rc3 Год назад
THANK YOU Times a 1000000000000000
@Bob-ex2yx
@Bob-ex2yx 3 года назад
Because of you my radio is not longer a fucken mess
@olivierf.4931
@olivierf.4931 3 года назад
Hi Datfpv :-) My receiver is actually inverting the directions in Betaflight for YAW and ROLL meaning that when I mover the stick to the left the colored band goes right and when I move it right it goes left! Interestingly enough , the quad on the screen is looking in the left direction instead of looking straight! Do you have a tip to fix this?
@Datfpv
@Datfpv 3 года назад
hey, that doesn't sound right... ? not sure whats going on to be honest ?
@olivierf.4931
@olivierf.4931 3 года назад
@@Datfpv I don't know if it will work when flying but I changed the settings in the radio on the two channels that are affected. I clicked "invert" and it works correctly now in Betaflight the bars move in the correct direction but in the end the source controls are inverted! I can't test if it flys well because my power supply is insufficient to charge the 3S battery :-)
@trotter_mac
@trotter_mac 2 года назад
What if it’s set up with the correct “AETR1234” but my pitch is reversed, up is down and down is up?
@trotter_mac
@trotter_mac 2 года назад
Never mind! Grinding it out, It was my controller. Thanks for all your creations. Helped me narrow it down
@dan71559
@dan71559 2 года назад
Dear God you just changed everything.
@Datfpv
@Datfpv 2 года назад
I know lol
@dronedre_fpv3143
@dronedre_fpv3143 2 года назад
I need help my man trimming the transmitter.when i go to arm the quad the drone jus rolls and yaws left
@Datfpv
@Datfpv 2 года назад
try the deadband in the receiver tab in beatflight - that might help
@ELValenin
@ELValenin 3 года назад
I think my Literadio 2 Stopped working out of nowhere... was just flying in the sim and suddenly one of the stick inputs (yaw) doesn't work correctly any more. Center of the stick is now showing 1920 (other ones are all 1500), full left 1865 (other ones 988) and full right 2012 (so full right is normal) Is there a fix to this or do I now need to contact betafpv for warranty? I hope it's an easy fix because the motor spare part I ordered over a month ago should arrive soon and I want to fly again so bad...
@ELValenin
@ELValenin 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8_GRFKilw7w.html link to a video showing the issue
@Datfpv
@Datfpv 3 года назад
I've taken a look at the video and I don't have any suggestions for that :( I was thinking about RX endpoints in betaflight but that just looks broken to me - contact betafpv support they should help you out.
@ELValenin
@ELValenin 3 года назад
@@Datfpv thanks for taking a look! I now contacted support. Looked on the internet and it seems like mulitple people have issues like this. :( maan first the quad now the radio.. talk about bad luck..
@ELValenin
@ELValenin 3 года назад
@@Datfpv the support didn't reply so I opened it up and turns out it was just a broken wire! I ended up extending the wire at the point it was broken and soldered it back onto the potentiometer of the gimbal. Works perfectly fine now :)
@Datfpv
@Datfpv 3 года назад
@@ELValenin sounds good mate - glad you were able to sort it, hope you made a video!?
@365rc3
@365rc3 Год назад
Now I just have to figure out why aux channel 5 is active the whole time
@fujimatosa
@fujimatosa 3 года назад
How to fix it without betaflight? I have meteor75 with Lite 1S Brushless FC, and it has no any usb connectors. Ho to do it in OpenTX?
@Datfpv
@Datfpv 3 года назад
honestly no idea for that one I can't believe betafpv made something that you can't alter / fix at all... they might of though ?
@fujimatosa
@fujimatosa 3 года назад
@@Datfpv I did it somehow with OpenTX. Need to order new FC, because one motor not spinning
@diggsit69
@diggsit69 3 года назад
Can you tell me where I get the beta flight and what version to download to my windows 7 PC? And will that straighten out the Betafpv controller to work properly because the only thing It can do is turn the beeper on the drone now.
@Datfpv
@Datfpv 3 года назад
betaflight.com download the one that works on your computer - I don't know what computer you have mate!? tray them all?
@diggsit69
@diggsit69 3 года назад
@@Datfpv Hi I tried installing the beta flight on my Mac Pro and I installed the one driver because the Mac doesn’t need the other drivers that are mainly for windows I am told? and I still can’t get the beta flight to show the port that recognizes the drone when it’s plugged in the beta flight it just gives me the option for Bluetooth in usb in the drop-down menu but no COM port for the tiny hawk 2 when it’s plugged in to the computer any help with the Mac and why it’s not recognizing the Tiny Hawk 2 when it’s plugged in the USB after I install the one main driver that’s needed for the Mac Pro?
@diggsit69
@diggsit69 3 года назад
@@Datfpv hi after I installed beta flight on my Mac pro and the one driver that’s needed when I plug the tiny hawk 2 BNF into the USB the drop down I don’t see any option for the drone just Bluetooth is the only available port I’m using a data cable that came with the tiny hawk 2 in a kit and I can’t seem to get beta flight to recognize when the tiny hawk 2 is plugged into the USB port any advice?
@sheapyfpv8224
@sheapyfpv8224 3 года назад
Just got babyhawk 2 setting up modes in betaflight and it won't let me assign beeper to the switch I want on my tango 2. For some reason beeper only works on 3 switch button with angle and horizon really annoying.
@Datfpv
@Datfpv 3 года назад
This should help ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b5UYxhk5Bdk.html
@sheapyfpv8224
@sheapyfpv8224 3 года назад
@@Datfpv thanks will give a try great video by the way 👍
@sheapyfpv8224
@sheapyfpv8224 3 года назад
@@Datfpv didn't work beeper only works on 3 positioned switch either SB or SD. Have a protek35 which I have no problem setting which ever switch I want for beeper but my new babyhawk 2 won't play ball no matter what I do!!
@daddyjumjumsroomservice168
@daddyjumjumsroomservice168 5 месяцев назад
My controller connects but when i go to receiver tab its spinning and nothing moves when i use joysticks on controller i just got a beta fpv meteor85 elrs and my controller is the literadio 3 pro please help just started fpv its freaking me out thanks.
@user-nj2rl7xf8g
@user-nj2rl7xf8g 3 месяца назад
The problem could be you raidio needs calibration
Далее
TBS Tango 2 set-up guide instructions
12:39
Просмотров 79 тыс.
КРЫЛЬЯ - ЗЕНИТ: все голы
01:00
Просмотров 85 тыс.
Betaflight won't arm - all 26 reasons explained
10:59
Affordable FPV Controllers That DON’T SUCK!
20:52
Просмотров 160 тыс.