Ram NO CRANK after Starter Replacement? (It's NOT what you think!) 

I bet there was nothing wrong with the original starter.

If you run into this issue with corrosion on tipm connectors , make sure left inner fender is intact and the holder that it snaps into. other wise the spray off the tire will just ruin any repair!

As usual you always do a good job on your diagnosis. You also remind the customer that if it occurs again that it may need to be replaced, very good.

Great thought process, Ivan! Potentially annoying diagnostic made fast and easy by a smart approach to the problem.

I enjoy your channel and the way your so thorough in your diagnostics. Had an issue with 2006 jeep grand Cherokee had a bad TPIM , only one thing, not working back up lights. I found a used TPIM on eBay and replaced it now it’s working fine. Chrysler is famous for their band TIPM’s.

Once again, great logical diag and no parts needed, thanks for posting, nice to c u get an easy one ❤

A little late watching Ivan but once again Great Video and diag. You are 100% right about jumping the gun without collecting data it can lead you down the old rabbit hole, been there done it. And also moving things harness around when you have circuit issues and fixing the problem without knowing what you did. Your a great teacher Ivan have learned alot from your channel among others.

Nice job Ivan. But i really bet that the old starter are just fine! Just the TIPM problem, Chryslers are known for bad stuff! Great diagnosis and outcome of the problem! Only green crusties! Excellent video Ivan

Nice job! I would of checked under that add on tape to see what was connected also! When you first looked at the fuse box in vehicle, you can see the lock down tab bent down compared to the others and the tape wrapped around two wires.

With 207000 miles the starter replacement is questionable but could have been legitimate. Other than what you did with the deoxit, I would have checked the fuses, relays etc in the TIPM just to be sure no more green crusties were visible. Just a thought. Another good job Ivan!

TIPM reached a tipping point. My DeoxIT D5 nozzle swivel leaks too.

It was what I thought it was, but not where I thought it was. From the title, I assumed it would be corrosion at the starter solenoid wire, but obviously seeing all the codes, I soon realised I was wrong, again, lol. Another great case study and lesson Ivan, thank you!

Excellent approach to problem! Well done 👍

another great video! Thanks for all your hard work.

Great job Ivan as always 😊

Corrosion can affect anything electrical... On my 8th gen 01 Corolla, i discovered that the cooling fans turned on with engine off but key on run position. My research lead me to look at the air conditioner high pressure switch since others reported the same symptom i had. I ruled out the coolant temperature sensor because last fall I replaced that since at that time I had a coolant temperature inefficient code (p0125 code i think) with new water pump and thermostat. Last summer I replaced the water pump since the bearing sounded angry. I replaced the thermostat because it was right there as well and I generally prefer to replace that when I buy a new to me car. Since I don't have the equipment to evacuate the refrigerant, I chose the dealer to do that, but I chose to put the lead tech on a test to see how he diagnoses an issue. He originally thought it was either the coolant sensor or the AC pressure switch. Talking with him, I had him remove the connector to the switch to see how that was. It was green with corrosion. I have the switch and even after he cleaned it as a temporary fix until the new switch came in the next day, it has green crusties on the pins. After replacing the switch, AC gets even colder than it was before. It was always good and cold, but it is running more efficiently now.

Great stuff. Quickies are great! 👍👍🇺🇸

Changing parts without any guidelines is always waste of time and money 💰 it could have been a small diag and repair..cheers ivan another one bagged

Can you show all your “test lights” and hookups that you use? I’m curious to how you achieve different amperage’s

Power and grounds man! I learned that from the smartest diagnostician I know!

Another great diagnostic.

those flip-up staw deoxit cans always cracked right at the nozzle. I like the new cans. they use the old style red staw and have an adjustable flow valve.

The Best parts are no parts Required! Nice fix for all.

I need this guy for an hour to show me how to to wire up my transmission swap.

I said tipm second I seen title Seen that over 1 thousand times Great diagnosis

I have same problem with my 2010 jeep commander, is no crank tipm, >>> I also replaced starter and relay and new key fobs.

Great video Ivan........ I find WD40 spray cans, with 'Smart Straw' also leak when spraying, until half the can is used, then the pressure drops. Product should be renamed..... WD40 Dumb Straw !

A clean & reseat of connector, which comes to electrical magic.😁

Dose the diagram show the valve coil windings? My thoughts are that there’s a clamping circuit of some kind integrated in valve normally you want to filter at the source so you don’t interfere further into the circuit.

Always a great job Ivan. 60107 USA says hi.

Amazing you nailed it BRO😍

When Ivan says "Very interesting" you know the problem itself is in trouble!

I don’t know how to let you know other than this but I just bought a digital torque wrench from H.F for around $150. This includes angle torque. I know you like a deal and I think this is one. 😊Steve

WOW good process

Just remember the Chrysler jingle, "Powers and grounds and TIPMs, Oh, MY!!!"

Chrysler TIPM’s, a pain in the butt without the corrosion problems you have back east. Cool Mak’s TIPM rebuilder is out on the west coast in Southern Cal. Good to know. Ivan, I can’t for the life of me get the camera flag on the right hand side of the ThinkToolpros to appear so I can take a snap shot of data. Is there a trick to that? Do I need to create a customer/vehicle report first?

The added wires could be the AC fix. Online there is a fix that rewires a clutch relay

At 8.33 it shows a C2202 code Original VIN mismatch or missing. What does that mean please?

Not just DeOxit, but all are now using those flip nozzle sprayer/wasters. Personally, I remove them first thing and replace with a normal spray nozzle.

Thanks Ivan!

My niece was clearing out my half-brother's stuff after he passed away. They were trying to sell his Jeep Cherokee. They couldn't get the engine to stay running. Ask me if I would look at it. Went to my half-brother's house and got into his car and started, but it wouldn't stay running, at that point I notice the security light was on in the dash. Asked my niece if they had another key for the car. She searches around and found another key. Started the car with the new key and it remained running. The key that she first gave me was a key that was cut at an Ace hardware store. It would open the doors and start the engine, but it didn't have the chip to keep the engine running.

I've watched plenty of Watch Wes Work to immediately get tipped on the word "TIPM" :P

What was the red jumper for !!?

now I really miss my 75 B300's

i just love it why does things go thru the ABS unit that have nothing to do with brakes. why does so much go thru the radio that has nothing to do with music. could be so simple. wonder what they would do if you ordered a vehicle without a radio and ABS well i guess it wouldn't run but i know you probably cannot order a vehicle without a radio unless its a UPS truck

4:31 pin pointing and the manufacturers who DESIGN IN hurdles and obfuscation to separate 'the wheat from chaff' in technician terms..

As a salt water marine mechanic for decades I spray all connections with CRC or WD40 a few times a year . We have road and sea salt on long island new york. Curious if owner bench tested old starter ? Odd how Dodge place Tipim female plug ports facing up to hold water?

Awesome job as always. Question does the thinktool you have lock you out of the gateway if its not updated just wondering my snap-on does wondering why only couple months over due seems little crazy thanks

2013 ram 1500 5.7, same thing happened the day our family arrived at the beach for vacation. Thought it was a bad battery so spent $300 on that, nope...thought it was the starter bc of the single click so had a new one installed for $430, nope. Maybe relays? +$20 nope. Autozone and i are now buddies and 3 scans, 2 mobile mechanics cant figure it out. Scans show everything is good. Have to use a jump box to get it going and then i dont have the issue for a few hrs. Ideas? Look for green crusties?

order the 5 oz Deoxit by model number D5S-6-LMH, the old style with the stick in straw. The "perfect straw" version that you have is model D5S-6P...as you see, it wastes too much product.

Going out on a limb just for fun , green crusties or it is locked up. 👍👍🇺🇸

The ole Fonzie Technical Tap

I wonder what that electric tape connection is.?

all my deoxit cans have done that,not sure why they all seem to leak like that

For how much that stuff cost's it should spray ALL WHICH WAYS & NOT LEAK. But then again for how much that Truck cost's it should have wire connections that are WATERPROOF.

Imagine the mess with green crusties when they shift to 48 volt electrical systems with wires the diameter of a few human hairs. That is coming in a few years to save cost on copper and to reduce weight.

Awesome

I thought you should have pulled the wired taps.

I have 2010 with no crank no start and blank dashboard.

Genuine question, does Deoxit work that well just through a spray application, or would it be better to also manually scrape a bit and blow it out to be sure? I see that it helps and works, but it seems too much like magic to me 😂

Good 👍

Ivan i think the green crusties are scared of you. One look and it ran

how do you charge when the problem is intermitent and the good running is intermitent also how can you charge

I'm about to buy a new scan tool mines getting a little long in the tooth. I'm trying to decide between the Thinktool Pros and the Topdon Phoenix, which as I understand it, has the same Launch based software that the Thinktool has. I actually like the actual tablet for the Topdon a little better, but they are both the exact same price. Also the Topdon comes with both the wireless VCI, and the backwards compatible OBD1 wiring kit. I'm thinking I might actually get the Topdon.

👍

👍👍

It amazes me how many customers bring a vehicle with no gas in it

Comment before I watched the video. If it's not what I think, then it's not a bad ground. LOL

Wow, this was done a month ago but just posted today 7/26/23? Interesting..

That's so bloody annoying, i would of replaced the starter as well 😞 Next time it will be the starter lol

dont ya just love modern electroCRAP

Green Crusties again causing a no crank no start .. 🙃.. well , its was a great fixx

Spray and spray again. The can is the only thing that needs fixing.

Older style LMH D5S available, much neater!

ONE SMART COOKIE!

That's so annoying when you move something and the problem just goes away and won't come back. How can you stand behind this when you're not 100% sure what it was? But I guess if it's works fine now, then who's to complain, right? I suspect that we may see this one again in the future.

Lucky you only touched one thing. Nothing worse than fixing something without knowing what you fixed.

Don't you hate it when you replace a part which seemingly has no correlation with the PCM & you get this type of thing happen . So fustrating Cheers Ivan at least it wasn't an OVLOV mate.

Wo ok

This might have been an NPR repair all along.

Hi Ivan, I don't think this truck is repaired, you just disturbed the problem and it probably will be back

Start/No Crank!

The engine sounds beautiful. must be cause its a Mopar.

Bad ground or that splice is suspect.

Do you need the new tip? Come and look to see what else is gonna

..yes DeOxit needs go back to the old design spray nozzle....

Sorry Ivan but step one should be a visual inspection. I can’t tell you how many vehicles I have repaired by just looking under the hood and seeing a mouse eating threw wiring or someone has aftermarket things plugged in or battery corrosion just to name a few.

It’s never what I think lol 😏my can leaks same dang way

The 'green crusty's' strike again!

Car companies should make this a routine maintenance thing... Unplug the harnesses after 10 years and spray the connections with deoit.

I will show my ignorance by asking : "what is a tipm?"

TIPM again! Burn it with fire😂

About a year ago have a ford Barra green Australia had to take my headlight of have to guard partly of I disconnected main power next to the headlight which went to the harness battery went flat anyway got new battery as it was dodgie anyway went to start it no cranking it's been of the road to fix up got new starter thought what no start I thought forgot wire checked all good then I thought no I didn't I remembered I had put new bulbs and cleaned it I thought no I wouldn't have forgotten well I looked down Under air filter bi could see harness disconnected I felt like an idiot such a small but vital mistake roared back to life I thought U idiot Rick

Another dodge with wiring problems, shocker. Seen so many of these with various issues like this I will never be touching one.

Heaven forbid if you're color blind trying to read those diagrams. Also watch out for the "red" crusties!

In the end it's still a Dodge which stands for DUMB OLD DODGE GARAGE ENGINEERING lol I came up with that going to vo-tech in 1978 in mechanics class

does everyone nowdays keep no more than 1/4 tank of gas in thier tank anymore? ha

Lol that doesn’t look good

More than luck because you went to the potential problem

CorrosionX is better and cheaper than Deoxit